Develop Bugs

[Q] Please Help. Stuck On Initial Screen. Dr Ketans KK BL

Please Help Really Urgent, My dads gonna ... *insert worst here* ... me :crying::crying::crying:
Ok i decided to upgrade his phone gt-n7100 to kitkat 4.4, as a surprise .. but. :crying:
as per dr ketans instructions,
installed odin.
installed cwm.
downloaded N7100_ND3_DrKetan_Custom_ROM_V7_3. installed via cwm.
rebooted. worked fine.
But no net, and phone would not show charge icon so installed as recommended in the guide the bootloader N7100_ND from d-h.st/TQq
using odin (installed as bootloader)
rebooted ... but now phone stuck on intial screen. :crying: :crying: :crying:
CANNOT go into cwm
tried flashing cwm again. no avail
tried another rom N7100XXDMG1_N7100ODDDMG1_INU_Prerooted. it fails to flash
tried kies, to update rom, it says cannot update this device
cannot find stock image (hotfile is down), nor am sure if it will update.
please help, where did i went wrong. followed everything to the instructions. spend so long trying to fix it. finally posting here in hope of help
Please help. Thankss :crying:

ZainNaiz said:
Please Help Really Urgent, My dads gonna ... *insert worst here* ... me :crying::crying::crying:
Ok i decided to upgrade his phone gt-n7100 to kitkat 4.4, as a surprise .. but. :crying:
as per dr ketans instructions,
installed odin.
installed cwm.
downloaded N7100_ND3_DrKetan_Custom_ROM_V7_3. installed via cwm.
rebooted. worked fine.
But no net, and phone would not show charge icon so installed as recommended in the guide the bootloader N7100_ND from d-h.st/TQq
using odin (installed as bootloader)
rebooted ... but now phone stuck on intial screen. :crying: :crying: :crying:
CANNOT go into cwm
tried flashing cwm again. no avail
tried another rom N7100XXDMG1_N7100ODDDMG1_INU_Prerooted. it fails to flash
tried kies, to update rom, it says cannot update this device
cannot find stock image (hotfile is down), nor am sure if it will update.
please help, where did i went wrong. followed everything to the instructions. spend so long trying to fix it. finally posting here in hope of help
Please help. Thankss :crying:
Click to expand...
Click to collapse
1. Reboot to recovery - Power button+Home button+volume up then factory reset if this don't work:
2. Download a 4.4.2 rom from Sammobile and flash through Odin and then repeat the procedures to install Dr Keaton Rom.
Hope you can solve the problem.

ZainNaiz said:
Please Help Really Urgent, My dads gonna ... *insert worst here* ... me :crying::crying::crying:
Ok i decided to upgrade his phone gt-n7100 to kitkat 4.4, as a surprise .. but. :crying:
as per dr ketans instructions,
installed odin.
installed cwm.
downloaded N7100_ND3_DrKetan_Custom_ROM_V7_3. installed via cwm.
rebooted. worked fine.
But no net, and phone would not show charge icon so installed as recommended in the guide the bootloader N7100_ND from d-h.st/TQq
using odin (installed as bootloader)
rebooted ... but now phone stuck on intial screen. :crying: :crying: :crying:
CANNOT go into cwm
tried flashing cwm again. no avail
tried another rom N7100XXDMG1_N7100ODDDMG1_INU_Prerooted. it fails to flash
tried kies, to update rom, it says cannot update this device
cannot find stock image (hotfile is down), nor am sure if it will update.
please help, where did i went wrong. followed everything to the instructions. spend so long trying to fix it. finally posting here in hope of help
Please help. Thankss :crying:
Click to expand...
Click to collapse
You did a lot of steps that shouldn't have been done in the first place so instead of trying more things that wouldn't work just flash the official stock NE1 firmware from https://mega.co.nz/#!2QRmCbyb!YkWs927BfvYxqL-vJiQHXkshqG3UtqHm4XIDbgLsEK0 ,extract the zip file you'll get a tar file ,put your phone into download mode , (uninstall kies) only run odin, connect the phone to computer,make sure the ID:COM turns blue then check mark AP/PDA tab on odin and select the downloaded firmware.Dont touch anything else hit start and let odin do it's magic once your dad's phone successfully boots and you get network etc etc.then ask me i'll tell how to root the stock firmware and run custom ROM.Good luck.

singhpratik87 said:
You did a lot of steps that shouldn't have been done in the first place so instead of trying more things that wouldn't work just flash the official stock NE1 firmware from https://mega.co.nz/#!2QRmCbyb!YkWs927BfvYxqL-vJiQHXkshqG3UtqHm4XIDbgLsEK0 ,extract the zip file you'll get a tar file ,put your phone into download mode , (uninstall kies) only run odin, connect the phone to computer,make sure the ID:COM turns blue then check mark AP/PDA tab on odin and select the downloaded firmware.Dont touch anything else hit start and let odin do it's magic once your dad's phone successfully boots and you get network etc etc.then ask me i'll tell how to root the stock firmware and run custom ROM.Good luck.
Click to expand...
Click to collapse
Thankyou Sooooooo verrrrrrrrrrrrrrrrrrrrrry muchhhhhhhhhhh :laugh: Bless You.
Thanks For the detailed step by step with the link AND working reply. Thankyou. This is the first rom that worked, i even tried another and thought phone is dead and me.
Please let me know how to kitkat it now.
Should i follow same steps.
i.e install cwm
then should i first install wifi driver by dr ketan, or boot loader or the rom ? from here forum.xda-developers.com/showthread.php?t=2472270
Thanks again :laugh:

very odd.
the phone after flashing, is now booting into previous rom i.e 4.4 Kitkat ???
is my phone screwed? using odin 3.04
shouldn't it be booting into stock now as you said after the flashing
thanks

ZainNaiz said:
very odd.
the phone after flashing, is now booting into previous rom i.e 4.4 Kitkat ???
is my phone screwed? using odin 3.04
shouldn't it be booting into stock now as you said after the flashing
thanks
Click to expand...
Click to collapse
That's odd,go perform a factory reset and see what happens.Which one was your previous ROM?
Edit: After factory reset if it still boots in your old ROM, reflash the stock rom i gave you and then tell me what happens.
Use odin v3.09 at least ill give you the link hold on
http://odindownload.com/
Are you sure it's the OLD ROM and not stock rom?Check in settigns>>about device>>and tell what you see under build # cause the link i gave you is of Kitkat ROM too NE1 firmware

singhpratik87 said:
That's odd,go perform a factory reset and see what happens.Which one was your previous ROM?
Edit: After factory reset if it still boots in your old ROM, reflash the stock rom i gave you and then tell me what happens.
Use odin v3.09 at least ill give you the link hold on
Are you sure it's the OLD ROM and not stock rom?Check in settigns>>about device>>and tell what you see under build # cause the link i gave you is of Kitkat ROM too NE1 firmware
Click to expand...
Click to collapse
Thankyou. Downloaded Odin 3.09. Reflashed it. Its Stock Now KOT49H.N7100XXUFNE1
Please tell me should i now directly install dr ketans rom without boot loader and wifi? Thanks

ZainNaiz said:
Thankyou. Downloaded Odin 3.09. Reflashed it. Its Stock Now KOT49H.N7100XXUFNE1
Please tell me should i now directly install dr ketans rom without boot loader and wifi? Thanks
Click to expand...
Click to collapse
Yes you dont need bootloader nor wifi fix anymore since flashing official stock 4.4.2 you are on the newest boootloader.Now you need to root your phone.So you need philz touch 6.41.tar file and supersu v 1.97.
Philz tar file
SuperSu v1.97
Refer to this post of mine in another thread How to root
The above posts show how to flash recovery in odin and do exactly what it says in the image UNCHECK AUTO REBOOT IN ODIN once its done flashing and says pass phone wont be turned off so remove the phone from laptop and pull the battery out and follow my instructions there.
Once you boot your phone again after flashing superSU it will ask you if you want to disable KNOX select yes (knox will be triggered to 0x1 that means warranty will be void)
Also thank the person when you visit his thread since he made the thread and i just helped him a bit.his id is smeet.somaiya

singhpratik87 said:
Yes you dont need bootloader nor wifi fix anymore since flashing official stock 4.4.2 you are on the newest boootloader.Now you need to root your phone.So you need philz touch 6.41.tar file and supersu v 1.97.
Philz tar file
SuperSu v1.97
Refer to this post of mine in another thread How to root
The above posts show how to flash recovery in odin and do exactly what it says in the image UNCHECK AUTO REBOOT IN ODIN once its done flashing and says pass phone wont be turned off so remove the phone from laptop and pull the battery out and follow my instructions there.
Once you boot your phone again after flashing superSU it will ask you if you want to disable KNOX select yes (knox will be triggered to 0x1 that means warranty will be void)
Also thank the person when you visit his thread since he made the thread and i just helped him a bit.his id is smeet.somaiya
Click to expand...
Click to collapse
Thanks. Thanked the person. And Your Post.
Just installed cwm and super su. thanks again.
Btw the link to download odin seems to be spamware, insted of downloading odin, i got a program 104kb giving lots of options, and at the end still did not install odin. Just for info. (i already had odin later version, and used that before, but wanted to check if a newer one is available, so header over there).
Going to install dr ketans custom rom. fingers crossed.
Thanks for all the help, will update, how it goes.

It never asked me to disable knox...
Would it be problematic if knox is not disabled ? as i wanted to use knox.
...
Finished flashing dr ketans rom, and it booted just fine, albiet slow compared to the stock rom.
Thankyou Pratik for all the help with detail and correctness.
Bless You.

ZainNaiz said:
It never asked me to disable knox...
Would it be problematic if knox is not disabled ? as i wanted to use knox.
...
Finished flashing dr ketans rom, and it booted just fine, albiet slow compared to the stock rom.
Thankyou Pratik for all the help with detail and correctness.
Bless You.
Click to expand...
Click to collapse
Ya i think all the custom ROM for our note 2 are heavily modded the latest ones that's why sometimes just to feel the smoothness i flash back stock ROM and when i get bored of them i flash one of the custom roms.Glad to know you were able to successfully flash the rom of your choice.Enjoy.

Help
Hello everybody, I have a problem with my galaxy note 2 N7100.
The problem is the following:
One day I was using my phone normally, and all of a sudden the screen turned off and the phone never turned on again, (if you press the power button the screen turns a little gray, but you must be in a dark place to perceive it)
I can't access download or any other mode, or at least I can't detect if the phone has accessed it, because the screen just turns a little gray and does nothing else.
I have the drivers and have the official ROM for my region, ODIN installed, ADB, and other flashing tools and recovery files. But it has been long time since the last time I flashed something or did anything to the device and would appreciate a little help.
Can anyone here help me to solve this issue or knows what is happening with my phone?
Thank you for any kind of help you can give me
Update: I "think" I got into download mode blindly, just press the home+power+down vol buttons, then pressed up vol and connected the phone to the usb, surprisingly the computer made the usb sound that indicated me that the connection was recognized, Odin showed the ID:COM blue, so I proceeded to load the original rom and flash it, it took around 3.5 minutes and finally it showed succesful. But when I pressed the power button to turn on the phone, the screen still grey and doesn't start. I'm starting to think its a screen problem. I already purchased a new screen so I'm going to tell a frend to install it for me.
I'll be in touch

[Q] need help urgently please :'(

i don't know how i did that stupid thing ! i'm using note 2 gt-n7100 ( rooted ) i tried to install a new rom that doesn't built for my phone with " mobile odin v 4.2 pro unfortunately it flashed the sumsung star dous stock rom on my mobile but it doesn't boot .. i entered the philz touch recovery menu and select clean to install a new rom and restore my old rom and the problems started to appear !
the first thing is when i press the power button to lock my note 2 and try to open it again i find no response at all and the only way is to remove the battery and re turn it on again and try not to press the lock button as if i do so my mobile gives me no response and the screen doesn't turn on !
the second matter i noticed that when the start up i found the bluetooth icon trying to turn to green like i'm turning the bluetooth on but a few seconds it didn't turn on even i try to turn it ! the bluetooth doesn't work at all !
the third thing when i recieve a call that turn on the proximty sensor automatically if i touch the sensor the screen go black but i lose the control and give me no response at all and i have to remove the battery and turn it on again !
the things i noticed when i flashed the galaxy star rom with mobile odin that it has partion called param and the note to doesn't have it with its rom but have partion called modem which i didn't found in the galaxy star rom !
i need help please how i delete things that caused that conflict .. i tried to reflash the stock rom of my note with odin on my lap top but nothig changed and it hanging and the screen freezes with no control at all and that happened when i try to use a custom rom and flash it through the recovery .. please help urgently
sorry for my bad english

Two options I see:
1. Try to restore your device using Kies3
2. Flash newest firmware (get it from sammobile) for your region using PC-Odin.

Putting "need help urgently please :'(" does not help you in any way, in fact it makes it more likely that people will simply ignore the topic. Topic titles need to be descriptive, not generic non-descriptive.
Your problem is that like many newbies you cant be bothered to do research, read and learn before messing around with your device.
You should boot into download mode and flash a stock rom. Preferably a older one that doesn't have knox. Then flash a stock rom(without knox) in recovery mode. All the info you need is here on forum.

Androidwizzard said:
Two options I see:
1. Try to restore your device using Kies3
2. Flash newest firmware (get it from sammobile) for your region using PC-Odin.
Click to expand...
Click to collapse
i forgot to tell that one of the things changed that my mobile lost the usb support in the normal mode as there is no change when i connect it to my pc except it charges only but it works in the download mode and when i reflash the stock rom v 4.3 the screen freezes after a few seconds of turning it on and i have to remove the battery .. do you think that flashing the 4.4.2 sthock rom will make a change ? as the solution of kies isn't possible due to the lack of usb support !
is there a way to format the sectors that the pation " param " which flashed by the sumsung star dous stock rom is in it and make that conflict to delete that ??

What was your last stock rom on your device before messing up?
I do absolutely not agree with those horror tales about knox, most people don't use and easily get rid of.
Do you remember your last bootloader? MK4 or above? Then don't take any risk by flashing 4.3 firmware and go straight ahead to 4.4.2.
It will be the safest way to get a working device again.

TheATHEiST said:
Putting "need help urgently please :'(" does not help you in any way, in fact it makes it more likely that people will simply ignore the topic. Topic titles need to be descriptive, not generic non-descriptive.
Your problem is that like many newbies you cant be bothered to do research, read and learn before messing around with your device.
You should boot into download mode and flash a stock rom. Preferably a older one that doesn't have knox. Then flash a stock rom(without knox) in recovery mode. All the info you need is here on forum.
Click to expand...
Click to collapse
i'm sorry for the way i show my problem as i'm a newbie already .. it that possible to downgrade my rom ? i will try install 4.1.2 rom then flasing the 4.4.2 one but when i flashed the 4.3 stock rom the screen freezes and nothing changed what do you think of that ? it there's a way to delete the " param " found in the sumsung galaxy star dous rom ? i think that made this conflict but try to explain to me why flashing an old rom then a new one without knox ? what will that do ?

Androidwizzard said:
What was your last stock rom on your device before messing up?
I do absolutely not agree with those horror tales about knox, most people don't use and easily get rid of.
Do you remember your last bootloader? MK4 or above? Then don't take any risk by flashing 4.3 firmware and go straight ahead to 4.4.2.
It will be the safest way to get a working device again.
Click to expand...
Click to collapse
i was using dn3 rom which has android version v 4.4.2 but i enter the recovery and restored the stock rom v 4.3 and it works with no problem and it was the last rom i use it when i flashed the star dous rom through the mobile odin in my mobile .. is there is a things i must do when i'm flashin the rom through the pc odin ? like check the repartion option or some thing else ?
my bootloader version is : n7100xxuena1 what that mean ?

omar youssef said:
i was using dn3 rom which has android version v 4.4.2 but i enter the recovery and restored the stock rom v 4.3 and it works with no problem and it was the last rom i use it when i flashed the star dous rom through the mobile odin in my mobile .. is there is a things i must do when i'm flashin the rom through the pc odin ? like check the repartion option or some thing else ?
my bootloader version is : n7100xxuena1 what that mean ?
Click to expand...
Click to collapse
So you can also try the NA1 firmware, but nothing beneath that. NA1 is a knox enabled BL, so whatever you flash successfully will have Knox in it.
DON'T TICK REPARTITION!

Androidwizzard said:
So you can also try the NA1 firmware, but nothing beneath that. NA1 is a knox enabled BL, so whatever you flash successfully will have Knox in it.
DON'T TICK REPARTITION!
Click to expand...
Click to collapse
what you mean of the NA1 firmware if you mean the 4.3 stock rom i flashed it with the pc odin and my mobile screen freezes as i told you and nothing changed .. give me obvious steps 1 2 3 to do it to solve this problem and if you can give me a suitable download links .. now you know all the issues with my mobile and thanks for your interst

omar youssef said:
what you mean of the NA1 firmware if you mean the 4.3 stock rom i flashed it with the pc odin and my mobile screen freezes as i told you and nothing changed .. give me obvious steps 1 2 3 to do it to solve this problem and if you can give me a suitable download links .. now you know all the issues with my mobile and thanks for your interst
Click to expand...
Click to collapse
1) Go to Sammobile
2) Find firmware for your region -> download
3) Find Odin 3.09 -> download and install
4) Start Odin 3.09
5) Plugin device -> see if Odin displays active com port
6) Go into download mode
7) Link firmware download in tab PDA/AP
8) Let Odin check md5
9) Press start button
10) Wait until display of com port in Odin turns green and says success.
All these steps could also be found with an easy Google search or in Youtube tutorials

Androidwizzard said:
1) Go to Sammobile
2) Find firmware for your region -> download
3) Find Odin 3.09 -> download and install
4) Start Odin 3.09
5) Plugin device -> see if Odin displays active com port
6) Go into download mode
7) Link firmware download in tab PDA/AP
8) Let Odin check md5
9) Press start button
10) Wait until display of com port in Odin turns green and says success.
All these steps could also be found with an easy Google search or in Youtube tutorials
Click to expand...
Click to collapse
Thanks for your work but I did all these steps but my mobile freezes and noying changed fir sorry .. I flashed the 4.4.2 kitkat stock rom which is the latest one !

omar youssef said:
Thanks for your work but I did all these steps but my mobile freezes and noying changed fir sorry .. I flashed the 4.4.2 kitkat stock rom which is the latest one !
Click to expand...
Click to collapse
OK, I see. Try a wipe from stock recovery, wipe all possible.
Another option: Kies!
I know, you said not recognized but you must get it to work. Uninstall all drivers from PC an re-install drivers until Kies can restore your device.
Very last option: Find a Samsung repair near to you.

Androidwizzard said:
OK, I see. Try a wipe from stock recovery, wipe all possible.
Another option: Kies!
I know, you said not recognized but you must get it to work. Uninstall all drivers from PC an re-install drivers until Kies can restore your device.
Very last option: Find a Samsung repair near to you.
Click to expand...
Click to collapse
Look I searched the internet find something I think it will be useful if we can use it successfully called n7100 rescue rom consists of 5 files in one zip file it is the fully original factory rom but unfortunately it's 4.1.2 jellybean so how can I flash this rom successfully ? Is it possible downgrade the bootloader first or what ?? Please help

omar youssef said:
Look I searched the internet find something I think it will be useful if we can use it successfully called n7100 rescue rom consists of 5 files in one zip file it is the fully original factory rom but unfortunately it's 4.1.2 jellybean so how can I flash this rom successfully ? Is it possible downgrade the bootloader first or what ?? Please help
Click to expand...
Click to collapse
As you mentioned you already have been on NA1 firmware and as it seems you have flashed latest 4.4.2 with "a kind of success" I find it hope- and useless to even try this rescue rom. Bootloader is the reason why you can't successfully flash. NO DOWNGRADE POSSIBLE.

Androidwizzard said:
As you mentioned you already have been on NA1 firmware and as it seems you have flashed latest 4.4.2 with "a kind of success" I find it hope- and useless to even try this rescue rom. Bootloader is the reason why you can't successfully flash. NO DOWNGRADE POSSIBLE.
Click to expand...
Click to collapse
Can you illustrate your words ? For kies it's unpossible to connect my mobile to any pc the drivers works perfectly for any similarphone the fault is in my mobile not the driver and for sumsung care it will be high cost as the warranty ended ! And I wipe every thing possible through the stock recovery but noyhing changed !

I am beginning to lose my patience cause you don't follow my advice or even don't consider that I am right.
Look into system on your PC if there is an unknown device.
Whenever hardware is connected to PC Windows starts to search for drivers.
It doesn't matter that other devices are recognized correctly.
Wipe all Samsung drivers and re-install. Even re-install Kies too.
Start Kies and try restoration, maybe it will fail, but try. AND with current drivers you are supposed to fail.
At last: Try to find a friend with knowledge who can help you at your home or his.

[Q] Ace 2 stuck on Samsung Logo - won't go in recovery mode

Hey everyone
I have a huge problem with my ace 2, it is stuck on the Samsung logo and it won't go in recovery mode. Please, let me explain, I was fed up with my rooted 2.3 GB ace 2 and I decided to flash CM 10.2. I downloaded the .zip and flashed it along with the suitable gapps. After booting, I realised it did not have any signal and wifi was not available. After searching online for a while with not any results, I decided to flash CM 11. After that, wifi was back but still no signal. I said sc**w it and downloaded the official JB firmware for my phone from sammobile. After flashing it with odin, the phone won't boot. It stays in samsung screen. It won't even go in recovery mode in order to erase cache etc. I tried downgrading to the stock GB, ADB, KIES, DROID EXPLORER, the phone is recognised only in ODIN.
Can anyone help ?
-Thank you for your time

First Try odin with newest custom stocked rom. I got this "brick" couple times. And this think if working every time.

tsosmi_GR said:
Can anyone help ?
-Thank you for your time
Click to expand...
Click to collapse
Any (!!) CM needs JB FW at first...
I suggest to begin from scratch! Let the Phone boot completely after each FW flash.
1) Flash 3-Parted FW (see my sig) - Be sure you pick the correct one for you Phone (8160 / 8160P / 8160L)
2) Flash stock JB for your Phone and country
3) Flash CM11 and Gapps

fluffi444 said:
Any (!!) CM needs JB FW at first...
I suggest to begin from scratch! Let the Phone boot completely after each FW flash.
1) Flash 3-Parted FW (see my sig) - Be sure you pick the correct one for you Phone (8160 / 8160P / 8160L)
2) Flash stock JB for your Phone and country
3) Flash CM11 and Gapps
Click to expand...
Click to collapse
Hey man you saved me! Thank you very much! The three part rom did the trick! I bought an lg g3 this morning though thinkin my phone was totaled but Im gonna give my old (but thanks to you, working) ace 2 to my sister ..

Maybe this thread gonna help my prob.
Im accessing the thread by tapatalk and cant see what is your signature @fluffi444
Im suffering the same problem, the phone only able to enter downloadmode, i've tried install russian gingerbread with 3 file csc pda, and pit. But it doesnt work.
Maybe i need something else.
Sent from my Moto G using Tapatalk

10.1 Note (2014 Edition - SM-P600) Continuously Reboots - Please HELP

Hello Everyone!
I'm stuck!!! If anyone can help, it is so appreciated!
I attempted to root my subject named device using ODIN following these directions:
http://forum.xda-developers.com/galaxy-note-10-2014/development/root-cf-auto-root-t2905495
Everything seems to go as planned until restart.. the tablet continuously reboots, over and over, but fails to load.
I have no clue what to do from here, so this is my only option... ask those who have much more knowledge than me!
Thanks in advance. I really appreciate your assistance.

That's called a bootloop. Something went wrong with flashing. What is a subject named device? That autoroot method only works for smp600 that is already running stock 5.1 or 4.4.2 . Boot into downloadmode using the appropriate buttons, then Download stock firmarwe from sammobile.Com and flash via Odin to get back a working device.

Which build are you on? If it is 5.1.1, that method will result in a bootloop if you try to root.
Use this instead
http://forum.xda-developers.com/showthread.php?p=63637426
Sent from my SM-N915G using Tapatalk

diabl0w said:
That's called a bootloop. Something went wrong with flashing. What is a subject named device? That autoroot method only works for smp600 that is already running stock 5.1 or 4.4.2 . Boot into downloadmode using the appropriate buttons, then Download stock firmarwe from sammobile.Com and flash via Odin to get back a working device.
Click to expand...
Click to collapse
The tablet is a Samsung Galaxy Note 10.1 (2014 Edition) Model SM-P600.

Not sure about the build.... but I will most definitely checkout the link you provided - thanks!
Question, can I flash a different rom rather than stock?
Also, I was just able to flash TWRP via ODIN and was able to get TWRP to load on the device. I'm hoping to flash a custom rom from the external SD via TWRP. I don't care which one at this point.. just need to get the tablet functional again and get a backup saved lol.

smoothbeaver said:
Not sure about the build.... but I will most definitely checkout the link you provided - thanks!
Question, can I flash a different rom rather than stock?
Also, I was just able to flash TWRP via ODIN and was able to get TWRP to load on the device. I'm hoping to flash a custom rom from the external SD via TWRP. I don't care which one at this point.. just need to get the tablet functional again and get a backup saved lol.
Click to expand...
Click to collapse
Here is "how to" instruction by me - post #225 for upgrade to the latest 5.1.1 and root your device. Once done and you want custom rom, just boot into twrp and flash any custom rom that you like. Let me know if you have issue.
http://forum.xda-developers.com/gal...lollipop-5-1-1-galaxy-note-10-t3239971/page23

samsung i747 help

Good afternoon . sorry for my english writing an interpreter because of Belarus.
The problem, in my i747 screen does not respond to touch, after the installation cm13, all done correctly and according to the instructions, and after flashing when the phone beeps, the same does not go in recovery in odin mode. And now I do not know him Thu wasps do.

Flash the stock rom using Odin. You have i747 or i747m? You can confirm the model in Odin mode.

Re: Help
Tegra56 said:
Good afternoon . sorry for my english writing an interpreter because of Belarus.
The problem, in my i747 screen does not respond to touch, after the installation cm13, all done correctly and according to the instructions, and after flashing when the phone beeps, the same does not go in recovery in odin mode. And now I do not know him Thu wasps do.
Click to expand...
Click to collapse
@Tegra56
You may have to provide some more information about your device before we can start to identify the problem:
1. Have you checked the md5sum on the ROM you are using? (To make sure you did not get a bad download)
2. Is you device rooted?
3. What is your Bootloader/Modem Version #? [Settings-About Phone-Baseband Version: ( I747UCUFNJ2- this is the latest)]
4. Have you installed a custom recovery?(TWRP; CWM; Phil's Touch)
If you can provide this information I will try to assist with the problem.
edit: If you can't get into your settings follow @audit13 instructions in Post#2 and we will proceed from there.

audit13 said:
Flash the stock rom using Odin. You have i747 or i747m? You can confirm the model in Odin mode.
Click to expand...
Click to collapse
he does not go in odin mod

CoperaN said:
@Tegra56
You may have to provide some more information about your device before we can start to identify the problem:
1. Have you checked the md5sum on the ROM you are using? (To make sure you did not get a bad download)
2. Is you device rooted?
3. What is your Bootloader/Modem Version #? [Settings-About Phone-Baseband Version: ( I747UCUFNJ2- this is the latest)]
4. Have you installed a custom recovery?(TWRP; CWM; Phil's Touch)
If you can provide this information I will try to assist with the problem.
edit: If you can't get into your settings follow @audit13 instructions in Post#2 and we will proceed from there.
Click to expand...
Click to collapse
1 Firmware has been checked md5
2 firmware has rights root
3 This I can not say. as the phone will not turn on, it was i747
4 Was installed TWRP

Did you install cm13 for the d2att? Sounds like the incorrect ROM may have been flashed to the phone.

Re: Help
Tegra56 said:
1 Firmware has been checked md5
2 firmware has rights root
3 This I can not say. as the phone will not turn on, it was i747
4 Was installed TWRP
Click to expand...
Click to collapse
Ok @Tegra56
I noticed in your reply to @audit13 that you cannot get into Odin. But does the phone get into stock recovery mode?
Did you make a backup (with TWRP) of the ROM you used before flashing cm13 ? fingers-crossed
If you did, try restoring this backup first.

audit13 said:
Did you install cm13 for the d2att? Sounds like the incorrect ROM may have been flashed to the phone.
Click to expand...
Click to collapse
Yes, I downloaded it for cm13 for the d2att

CoperaN said:
Ok @Tegra56
I noticed in your reply to @audit13 that you cannot get into Odin. But does the phone get into stock recovery mode?
Did you make a backup (with TWRP) of the ROM you used before flashing cm13 ? fingers-crossed
If you did, try restoring this backup first.
Click to expand...
Click to collapse
unfortunately I did not make a copy

It may not help but have you tried using a USB jig to force the phone into download mode?
http://www.xda-developers.com/need-a-samsung-usb-jig-build-your-own/

Tegra56 said:
unfortunately I did not make a copy
Click to expand...
Click to collapse
Ok, Here is where the fun begins!!... First we must know what your bootloader/modem # is right now. This is very Important.
Based on the information you have provided thus far, it seems to me that your firmware was out of date when you flashed the custom ROM. My suggestion to you, would be to do a clean install (Wipe) of this ROM: http://d-h.st/sV2 You can Read More about it here: http://forum.xda-developers.com/showthread.php?t=2390147 It's a Custom KitKat ROM, just so you can boot into something, the recommended gapps for this ROM have been discontinued, but you can try "Open Gapps" Choose the 4.4 -Nano Package: http://opengapps.org/
If you were running KitKat 4.4.2 chances are, you might be updated to at least I747UCUEMJB in which case they are 3 incremental firmware updates left for your device. However updating firmware should only be done using Odin so we must try the above alternative first and then work on getting Odin to work with your device. Good Luck.
edit: I just noticed you said the phone won't turn on!!....
If you have TWRP installed then you will have to hold down the "Volume up" , "Power" and "Home" buttons, release the power button(Keep holding the other two) once you feel the device vibrate, when you see the android logo you may release the other two, TWRP recovery should boot.

audit13 said:
It may not help but have you tried using a USB jig to force the phone into download mode?
http://www.xda-developers.com/need-a-samsung-usb-jig-build-your-own/
Click to expand...
Click to collapse
No, I do not even know if such a method, after the holidays try