plz help me its my phone not work
Only works on Samsung logo
It does not have a Recovery
its work in odin but
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> recovery-clockwork-6.0.4.8-serrano3gxx.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
asmail4d said:
plz help me its my phone not work
Only works on Samsung logo
It does not have a Recovery
its work in odin but
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> recovery-clockwork-6.0.4.8-serrano3gxx.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
Click to expand...
Click to collapse
what do u want to flash?
it doesnt have recovery or costume recovery?
in the odin uncheck repartition.
plz give an screenshot from your odin in pc
I do not have recovery in phone
asmail4d said:
I do not have recovery in phone
Click to expand...
Click to collapse
ok.send screenshot from odin in pc.
plz any help
can rom startup normolly?
or have bootloop?
Sent from my GT-I9195
00ehsan00 said:
can rom startup normolly?
or have bootloop?
Sent from my GT-I9195
Click to expand...
Click to collapse
can not starup rom
add me skype baltan52
first download this :http://www.4shared.com/get/Gj80molBce/I9190.html?sop=true
this is pit file for i9190.
1. extract zip in your pc.
2. open odin and select pit and choose the pit file that u extracted.
3. make sure that repartition check-box is ticked.
4. select pda and choose a stock firmware of i9190.
5. press start.
but in this tutorial your phones memory be wiped
\
this is pit file for i9190.
1. extract zip in your pc.
2. open odin and select pit and choose the pit file that u extracted.
3. make sure that repartition check-box is ticked.
4. select pda and choose a stock firmware of i9190.
5. press start.
but in this tutorial your phones memory be wiped[/QUO
look He paused
what do u mean it paused?
wait a minute or two.if it freeze i dont have solution.
but it must work.there are no way
Sent from my GT-I9195
---------- Post added at 09:35 PM ---------- Previous post was at 09:32 PM ----------
do this work with only pit file
Sent from my GT-I9195
up up up
asmail4d said:
up up up
Click to expand...
Click to collapse
you do something wrong.
flashing pit file must fix it.
may be your drivers or usb cable have problem .
do this work in other pc if u can.
do you flash with only pit file?
Related
hi i'm new on the forum ... i hope i can post this here .. i need help with a note 2 i just got it and and when i start it it doesn't make any sound just comes a white screen wit point and lines .. first i fote its something wrong wit the screen or the graphic ...if i hold volume down +power+home i can access odin mode and the computer recognise that something its connected to it .. i got the usb drivers , odin3.07 and recovery file (CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW_Rev0406_low_ship_user.tar.md5) i folow the steps to install ...<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW_Rev0406_low_ship_user.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
on the thread it was saying that the md5 file doesn't need a PIT file ... odin was asking for one so i got one for gt-n7100 ..
Hi everyone, I'm new here and I need some help please.
I'm using Odin v3.04 to install CWM on my Galaxy grand duos, the phone reboots after installation but when I use the key combo, it takes me to the stock recovery.
My system's version is 4.2.2, It's not stock.. and I can't install stock roms because everytime they are zips, and when you extract them you don't get tar or md5 files.
What program should I use to install them? Thanks in advance
Here's what I get on odin when I install CWM:
<ID:0/014> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CWM-touch_i9082_chotu.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/014> Odin v.3 engine (ID:14)..
<ID:0/014> File analysis..
<ID:0/014> SetupConnection..
<ID:0/014> Initialzation..
<ID:0/014> Get PIT for mapping..
<ID:0/014> Firmware update start..
<ID:0/014> recovery.img
<ID:0/014> NAND Write Start!!
<ID:0/014> RQT_CLOSE !!
<ID:0/014> RES OK !!
<ID:0/014> Completed..
<ID:0/014> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/014> Removed!
ZeezoGT said:
Hi everyone, I'm new here and I need some help please.
I'm using Odin v3.04 to install CWM on my Galaxy grand duos, the phone reboots after installation but when I use the key combo, it takes me to the stock recovery.
My system's version is 4.2.2, It's not stock.. and I can't install stock roms because everytime they are zips, and when you extract them you don't get tar or md5 files.
What program should I use to install them? Thanks in advance
Here's what I get on odin when I install CWM:
<ID:0/014> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CWM-touch_i9082_chotu.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/014> Odin v.3 engine (ID:14)..
<ID:0/014> File analysis..
<ID:0/014> SetupConnection..
<ID:0/014> Initialzation..
<ID:0/014> Get PIT for mapping..
<ID:0/014> Firmware update start..
<ID:0/014> recovery.img
<ID:0/014> NAND Write Start!!
<ID:0/014> RQT_CLOSE !!
<ID:0/014> RES OK !!
<ID:0/014> Completed..
<ID:0/014> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/014> Removed!
Click to expand...
Click to collapse
This is because you are not flashing Fix-Recovery.zip with cwm right after flashing it through Odin, try this again
Take the recovery .tar file from here according to your firmware (4.1.2 or 4.2.2) : http://forum.xda-developers.com/showthread.php?t=2315529
Then follow this step by step instructions : http://forum.xda-developers.com/showpost.php?p=46395577&postcount=19
brother try trwp custom recovery if available for grand or any other custom recovery
good luck :good::good:
cwm on grand duos-
just uncheck the AUTO REBOOT option in ODIN,
when ODIN is just done , simply remove your battery,
no need to flash fix recovery,,
try what i said
TWRP recovery flashable via odin
give it a shot buddy
good luck :good::good::good:
Hi,
I have GT-N7100 with official ROM. Few months ago I received an invitation to upgrade my ROM from 4.1 to 4.3
I have accepted the invitation and the upgrade was smooth and all was OK.
3 weeks ago I received another notification to update the ROM. It was also 4.3 and in the description it was mentioned as better stability.
I have accepted the invitation.
This time I started to get problems. The phone after reset got stuck on the first screen with the model name of "SAMSUNG GT-N7100".
I have HOME+POWER+VoluneUP and selected to clear all data to factory reset. - I still got the same stuck failure.
I tried to download various of official ROMs from sammobile (Hong Kong, UK, Israel, UAE) and install them with Odin3 but I got the same FAIL error in all of them.
Here is the log:
"<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100ZSUENA1_N7100OZSENA1_N7100ZSENA1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> tz.img
<ID:0/004> boot.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
"
On my phone I see the following text:
ODIN MODE
PRODUCT NAME: GT-N7100
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
KNOX WARRANTY VIOD: 0
AP SWREV: A2
I tried to use KIES --> Tools --> Emergency firmware recovery -->
But the "List of devices requiring emergency recovery" is empty
When I restart my phone I get the following message:
"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I don't know what else to do?
Can you advise?
Thanks,
Dror
Maybe your USB Debugging isn't enabled. Try flashing a custom rom if you have twrp or philz recovery installed.
joy854 said:
Maybe your USB Debugging isn't enabled. Try flashing a custom rom if you have twrp or philz recovery installed.
Click to expand...
Click to collapse
I am noob.
Can you explain me step by step what should I do?
I don't think that my "USB Debugging is enabled" cause I don't know how to enable it.
I don't have any access to HOME+POWER+VolumUP anymore.
dror.dahan said:
I am noob.
Can you explain me step by step what should I do?
I don't think that my "USB Debugging is enabled" cause I don't know how to enable it.
I don't have any access to HOME+POWER+VolumUP anymore.
Click to expand...
Click to collapse
Download philz recovery here http://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7100/philz_touch_6.07.9-n7100.tar.md5
Download odin v3.09. you can get it on google. Put your phone in download mode. Connect to your pc using a USB Cable.
Open Odin Select PDA as the md5 file which is the recovery. After installing recovery download a custom rom like DN3.
Put the zip file of ROM into your external sd card using a card reader. Open philz recovery by pressing Vol up, Home and Power buttons together.
Wipe data and factory reset. Flash the rom. Your phone should be fully functional by now.
HIT THANKS IF I HELPED YOU
joy854 said:
Download philz recovery here http://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7100/philz_touch_6.07.9-n7100.tar.md5
Download odin v3.09. you can get it on google. Put your phone in download mode. Connect to your pc using a USB Cable.
Open Odin Select PDA as the md5 file which is the recovery. After installing recovery download a custom rom like DN3.
Put the zip file of ROM into your external sd card using a card reader. Open philz recovery by pressing Vol up, Home and Power buttons together.
Wipe data and factory reset. Flash the rom. Your phone should be fully functional by now.
HIT THANKS IF I HELPED YOU
Click to expand...
Click to collapse
I have run Odin v3.09 with philz_touch_6.07.9-n7100.tar.md5:
"<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.07.9-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)"
Then I have pressed: Vol up, Home and Power buttons together and got the following message (see image attached):
"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
So I couldn't continue according to the rests of steps as you described.
dror.dahan said:
I have run Odin v3.09 with philz_touch_6.07.9-n7100.tar.md5:
"<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.07.9-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)"
Then I have pressed: Vol up, Home and Power buttons together and got the following message (see image attached):
"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
So I couldn't continue according to the rests of steps as you described.
Click to expand...
Click to collapse
I have once undergone through the same issue. If odin got succeded it can't say "Firmware upgrade encountered an issue". You must be able to access the recovery if odin got succeded.
joy854 said:
I have once undergone through the same issue. If odin got succeded it can't say "Firmware upgrade encountered an issue". You must be able to access the recovery if odin got succeded.
Click to expand...
Click to collapse
Well it didn't worked for me.
I tried to do it again but now I get a failure:
"<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.07.9-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
"
Can you help?
Hi!
I was trying to root my SM-P605 with Odin 3.09. The USB drivers are installed, Odin finds the device on COM4 and I an trying to flash the image from RootGalaxyNote.com (http://rootgalaxynote.com/galaxy-note-10-1-root/how-to-root-galaxy-note-10-1-2014-edition/. The current firmware is P605ZSUCNE1 (it's 4.4.2 version).
When the process starts, it goes ok until "writing NAND" and then says that writing NAND fails. Can anyone help?
Thanks in advance,
vomus said:
Hi!
I was trying to root my SM-P605 with Odin 3.09. The USB drivers are installed, Odin finds the device on COM4 and I an trying to flash the image from RootGalaxyNote.com (http://rootgalaxynote.com/galaxy-note-10-1-root/how-to-root-galaxy-note-10-1-2014-edition/. The current firmware is P605ZSUCNE1 (it's 4.4.2 version).
When the process starts, it goes ok until "writing NAND" and then says that writing NAND fails. Can anyone help?
Thanks in advance,
Click to expand...
Click to collapse
Use odin 3.07
Nop...
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> autorootp600mj4.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> cache.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
vomus said:
Nop...
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> autorootp600mj4.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> cache.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
you said you had a p605 and your using a p600 firmware.... it should fail to flash
root?
moabizzi said:
you said you had a p605 and your using a p600 firmware.... it should fail to flash
Click to expand...
Click to collapse
If you are just looking to root your TABLET
Go download Towelroot read instructions *easy* click letitrain now you have root ,then go to playstore and get superSU.. during install It will popup a message normal or twrp hit normal /
install if you have KNOX just say yes or no i said no
done. *youtube it any questions*
Or just use the correct root file .... I believe Chainfire has one somewhere?
I tried to flash Samsung Galaxy note 2 Gt-N7100 firmware N7100XXUFNL1_N7100ODDFNI1_N7100DDUFND1_HOME.tar.md5 using odin version 1.85 ,3.07 , 3.09 , 3.12 .3 but i am getting Fail as odin status i found that i need to flash pit file so , i flashed pit PIT_N7100_16GB_20121102.pit along with it but still getting status as Fail .Then i tried flashing twrp too but still status is fail
odin log
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
I have TWRP recovery installed but i am unable to mount .
Internal storage , External sd card ,OTG are showing 0mb.When i boot into twrp a to3g window opens in to my laptop.
Please help me fix this.
Try flashing without pit file. Try different USB cables and USB ports.
audit13 said:
Try flashing without pit file. Try different USB cables and USB ports.
Click to expand...
Click to collapse
i have tried flashing without pit file , tried another usb cable and another ports too but still it's not working.Please help me
Bruh can your please share this topic with others too?
where you found that PIT file so i can try this too
janezz2 said:
where you found that PIT file so i can try this too
Click to expand...
Click to collapse
I googled "pit file for note 2 n7100" .
When you try to flash the phone with Odin and no pit file, what errors appear in the Odin log? Did you confirm the model # in download mode?
Post the Odin log when a flash fails. These logs can provide clues as to what's causing the problem.
audit13 said:
When you try to flash the phone with Odin and no pit file, what errors appear in the Odin log? Did you confirm the model # in download mode?
Post the Odin log when a flash fails. These logs can provide clues as to what's causing the problem.
Click to expand...
Click to collapse
odin log
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Try flashing without repartitioning.
Tried different USB cables and USB ports.
audit13 said:
Try flashing without repartitioning.
Tried different USB cables and USB ports.
Click to expand...
Click to collapse
how
Flash the stock rom from Sammobile.com using Odin without a pit file.
audit13 said:
Flash the stock rom from Sammobile.com using Odin without a pit file.
Click to expand...
Click to collapse
same error did not work