Hi!
I was trying to root my SM-P605 with Odin 3.09. The USB drivers are installed, Odin finds the device on COM4 and I an trying to flash the image from RootGalaxyNote.com (http://rootgalaxynote.com/galaxy-note-10-1-root/how-to-root-galaxy-note-10-1-2014-edition/. The current firmware is P605ZSUCNE1 (it's 4.4.2 version).
When the process starts, it goes ok until "writing NAND" and then says that writing NAND fails. Can anyone help?
Thanks in advance,
vomus said:
Hi!
I was trying to root my SM-P605 with Odin 3.09. The USB drivers are installed, Odin finds the device on COM4 and I an trying to flash the image from RootGalaxyNote.com (http://rootgalaxynote.com/galaxy-note-10-1-root/how-to-root-galaxy-note-10-1-2014-edition/. The current firmware is P605ZSUCNE1 (it's 4.4.2 version).
When the process starts, it goes ok until "writing NAND" and then says that writing NAND fails. Can anyone help?
Thanks in advance,
Click to expand...
Click to collapse
Use odin 3.07
Nop...
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> autorootp600mj4.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> cache.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
vomus said:
Nop...
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> autorootp600mj4.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> cache.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
you said you had a p605 and your using a p600 firmware.... it should fail to flash
root?
moabizzi said:
you said you had a p605 and your using a p600 firmware.... it should fail to flash
Click to expand...
Click to collapse
If you are just looking to root your TABLET
Go download Towelroot read instructions *easy* click letitrain now you have root ,then go to playstore and get superSU.. during install It will popup a message normal or twrp hit normal /
install if you have KNOX just say yes or no i said no
done. *youtube it any questions*
Or just use the correct root file .... I believe Chainfire has one somewhere?
Related
UPDATE: I was able to flash JB Update using odin 3 v185.[/B So problem is fixed.
I was trying to update my T999 via Kies to stock JB BUT update failed during the process. I believe I am in download mode
I see on the top
ODIN MODE (in red color)
PRODUCT NAME: T999
Custom Binary Download: Yes ( 1 Counts )
Current Binary: Custom
System Status:Custom
How do I restore this phone back to normal? I was trying to install stock jb via kie.
Thank you!
My suggestion is odin.
http://forum.xda-developers.com/showthread.php?t=1949687
mt3g said:
My suggestion is odin.
http://forum.xda-developers.com/showthread.php?t=1949687
Click to expand...
Click to collapse
Thank you, I just tried but no go; Odin failed.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T999UVDLJA_T999TMBDLJA_T999UVDLJA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> cache.img.ext4
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW-Rev0406_low_ship_user.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
GT-N7105 Hongkong
PDA:MB1 / PHONE:LL4 / CSC:MB1 (XXX)
Help me i can't use my phone (
I Do have
CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW-Rev0406_low_ship_user.tar
and
N7105XXDMC3_N7105OLBDMD1_N7105DXDMC1_HOME.tar w/ SS_DL.dll
i'm using odin 3.07
orignal usb cable
aimlessangel said:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW-Rev0406_low_ship_user.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
GT-N7105 Hongkong
PDA:MB1 / PHONE:LL4 / CSC:MB1 (XXX)
Help me i can't use my phone (
I Do have
CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW-Rev0406_low_ship_user.tar
and
N7105XXDMC3_N7105OLBDMD1_N7105DXDMC1_HOME.tar w/ SS_DL.dll
i'm using odin 3.07
orignal usb cable
Click to expand...
Click to collapse
someone help me T_T
mr
aimlessangel said:
someone help me T_T
Click to expand...
Click to collapse
Try use odin v1.85 or odin v3.04
You have N7105 and flashing SCH i605 ROM??
as well remove IMEI from public forum
dr.ketan said:
You have N7105 and flashing SCH i605 ROM??
as well remove IMEI from public forum
Click to expand...
Click to collapse
can you provide me a right firmware / rom
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7105ZHALJ4_N7105ZZHALJ4_N7105ZHALJ4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Try flashing with pit
aimlessangel said:
can you provide me a right firmware / rom
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7105ZHALJ4_N7105ZZHALJ4_N7105ZHALJ4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Sent from my GT-N7100 using xda premium
Check that Kies is not running in the background as it usually interferes with Odin. Hope this helps and good luck
rodrigoyasuda said:
Try flashing with pit
what do you mean flashing w/ pit?
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
mark.r22 said:
Check that Kies is not running in the background as it usually interferes with Odin. Hope this helps and good luck
Click to expand...
Click to collapse
kies is not in background
Use pit file and flash latest 4.1.2 ROM
If your device is 7105, here is thread
http://forum.xda-developers.com/showthread.php?t=2032849
Hi,
a friend of mine got is Galaxy note 2 stuck on a bootloop and we doesn't know what happened. The phone doesn't boot to recovery, only to download mode.
I'm trying to solve his problem but i'me having a lot of difficulties.
I installed all the things needed to do a factory reset:
Install drivers;
Intall ADB & Fastboot
download firmwere from samsung
download MJ5 bootloader
pit file to repartition
downloaded odin 3.07;3.09;3.10
but every time i use any of the odin versions to change the bootloader ou flah the PDA i get the same error:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_N7100XXUEMJ5_1903221_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> param.bin
<ID:0/004> tz.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Can any one tell me what could my problem be?
So, I have the SM-G920P. I was encrypting it when it failed. Well that sucks. Fired up Odin, set my phone into download mode, loaded the only version of the stock rom I have (5.0.2). It was running the newest version of the firmware, 5.1.1 with the stage fright fix. I'm using Odin 3.10.6 and when ever I try to flash it, Odin just says this:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920PVPU1AOCF_G920PSPT1AOCF_G920PVPU1AOCF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
How do I get it to pass?
Edit: I've tried different USB cables, different USB ports, everything.
ovil101 said:
So, I have the SM-G920P. I was encrypting it when it failed. Well that sucks. Fired up Odin, set my phone into download mode, loaded the only version of the stock rom I have (5.0.2). It was running the newest version of the firmware, 5.1.1 with the stage fright fix. I'm using Odin 3.10.6 and when ever I try to flash it, Odin just says this:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920PVPU1AOCF_G920PSPT1AOCF_G920PVPU1AOCF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
How do I get it to pass?
Edit: I've tried different USB cables, different USB ports, everything.
Click to expand...
Click to collapse
From all I have read you can't Odin back to a previous version once on 5.1.1.
Try this: http://forum.xda-developers.com/showthread.php?p=62274187
Sent from my SM-G920P using Tapatalk
correct, you cannot go back after you're on 5.1.1, that's why it's not working, you need to Odin a 5.1.1 tar
sent from my S6 using tapatalk
I am having the same error messages in ODIN as the OP. EverYthing I flash through ODIN fails. Even flashing stock 5.1.1 OF7 fails. I believe it's because I was on OGA so I have to wait until the tarball for that comes out I guess.
was a solution to this ever found?
Orion9k0 said:
was a solution to this ever found?
Click to expand...
Click to collapse
Yes. Use the latest version of Odin (3.10.7 or 3.10.6, both can be found here: http://www.samsungodindownload.com/) and use the latest stock TAR from: http://forum.xda-developers.com/showpost.php?p=63956192&postcount=226
Check the md5 on your TAR download to make sure that it matches. In my experience getting a bad or incomplete download is the number one cause of errors.
And be aware that you CANNOT DOWNGRADE. If you flash to the latest stock and firmware, you can't go back.
my s6 dosen't want to be fomated by givng me msg of cant open the serial(COM)port,and when am removing it in the pc it is turning off,
Hi
I got a big problem, my tablet Samsung galaxy Tab 3 sm-110
Well the problem its this :
-Reboot Loop
-Can't see the folder in my pc, because the MTP DEVICE USB cant install, And install Kies, but this dont work to me
I try the hard reset on him and appear the message "No Command"
Try Root the system with Odin v3.09 using CWR (T110.CWM.v6.0.4.8) & TWRP (T110.TWRP.2.7.0.1.tar), but dont work (FAIL)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T110.TWRP.2.7.0.1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Pls Somebody can help to solve this, I dont care if I lose the information
To be clear, when you try to do a normal start, you have a bootloop? And you can enter recovery?
My recommendation, at this point (with no further information), is to attempt to use the Kies emergency firmware installation method, or to obtain the full firmware package and flash it via ODIN/Heimdall.