[Q] Help Please, Galaxy Note 2 - Galaxy Note II Q&A, Help & Troubleshooting

<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW-Rev0406_low_ship_user.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
GT-N7105 Hongkong
PDA:MB1 / PHONE:LL4 / CSC:MB1 (XXX)
Help me i can't use my phone (
I Do have
CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW-Rev0406_low_ship_user.tar
and
N7105XXDMC3_N7105OLBDMD1_N7105DXDMC1_HOME.tar w/ SS_DL.dll
i'm using odin 3.07
orignal usb cable

aimlessangel said:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW-Rev0406_low_ship_user.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
GT-N7105 Hongkong
PDA:MB1 / PHONE:LL4 / CSC:MB1 (XXX)
Help me i can't use my phone (
I Do have
CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW-Rev0406_low_ship_user.tar
and
N7105XXDMC3_N7105OLBDMD1_N7105DXDMC1_HOME.tar w/ SS_DL.dll
i'm using odin 3.07
orignal usb cable
Click to expand...
Click to collapse
someone help me T_T

mr
aimlessangel said:
someone help me T_T
Click to expand...
Click to collapse
Try use odin v1.85 or odin v3.04

You have N7105 and flashing SCH i605 ROM??
as well remove IMEI from public forum

dr.ketan said:
You have N7105 and flashing SCH i605 ROM??
as well remove IMEI from public forum
Click to expand...
Click to collapse
can you provide me a right firmware / rom
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7105ZHALJ4_N7105ZZHALJ4_N7105ZHALJ4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)

Try flashing with pit
aimlessangel said:
can you provide me a right firmware / rom
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7105ZHALJ4_N7105ZZHALJ4_N7105ZHALJ4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Sent from my GT-N7100 using xda premium

Check that Kies is not running in the background as it usually interferes with Odin. Hope this helps and good luck

rodrigoyasuda said:
Try flashing with pit
what do you mean flashing w/ pit?
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
mark.r22 said:
Check that Kies is not running in the background as it usually interferes with Odin. Hope this helps and good luck
Click to expand...
Click to collapse
kies is not in background

Use pit file and flash latest 4.1.2 ROM
If your device is 7105, here is thread
http://forum.xda-developers.com/showthread.php?t=2032849

Related

[Q]Odin not flashing

Hello all,
I'm trying to return my Bell s3 (i747M) and I'm trying to flash the bell the bell stock rom. I'm using odin but nothing is actually flashing. This is all I see
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I747MVLALH1_I747MOYCALH1_20120814.100513_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl2.mbn
<ID:0/004> __Xmit Write fail
<ID:0/004> XmitData Fail..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried 2 different files on two different computers, any ideas?
Hi
Try to reinstall your drivers.
http://forum.xda-developers.com/showthread.php?t=1903516
Well I'm a bit of an idiot, new pc build and forgot about drivers. Also followed those connection issues and it worked just fine!

Note 2 brick - Can't flash anything

Hey all,
I've a little Problem with my Note 2.
I got various Crashs in the last days so i decided to flash another Rom. Same Random Crashes.
So I said, okay, lets try Stock.
I used this guide: http://forum.xda-developers.com/showpost.php?p=31801046&postcount=1
and this Rom from that guide: N7100XXDMC3 N7100DBTDMB1 (till now i tried 5 or so ).
If i flash it via Odin, everything seems okay, but at reboot it goes straight into TWRP again. It seems it doesn't flash anything (even if it is working for Minutes...)
TWRP says cant mount '/data' so i cant flash anything from there so for now, i have a 500$ chopping Board
And because of DownloadMode showing Custom i cant send it to Samsung.
I'm sad
Any idea for i reason why odin can't flash anything?
My last to tries:
DBTDME2 from Sammobile.com
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXDME6_N7100DBTDME2_N7100XXDME4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> tz.img
<ID:0/004> system.img
<ID:0/004> boot.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> recovery.img
<ID:0/004> modem.bin
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
No change, still shows TWRP Logo on normal boot and on recovery boot twrp but cant mount data oder ext sd
So i tried to flash another Recovery , philz_touch_5.08.5.
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_5.08.5-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
No change, TWRP all over.
pilzkopf92 said:
Any idea for i reason why odin can't flash anything?
My last to tries:
DBTDME2 from Sammobile.com
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXDME6_N7100DBTDME2_N7100XXDME4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> tz.img
<ID:0/004> system.img
<ID:0/004> boot.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> recovery.img
<ID:0/004> modem.bin
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
No change, still shows TWRP Logo on normal boot and on recovery boot twrp but cant mount data oder ext sd
So i tried to flash another Recovery , philz_touch_5.08.5.
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_5.08.5-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
No change, TWRP all over.
Click to expand...
Click to collapse
Being unable to mount Data partition in most case means that it is corrupted. Have you tried Full Wipe from Recovery to format Data and Cache partitions? The next thing is to flash PIT file in Odin to completely reformat filesystem(s) - here is the file http://d-h.st/Dlv from this thread.
It's like takin a hammer to kill a fly but it should work (be mindefull it's for N7100 and not N7105).
mat9v said:
[...]to flash PIT file in Odin to completely reformat filesystem(s) [..] but it should work
Click to expand...
Click to collapse
Thanks but Sadly... it doesnt
Here is what odin Tells me:
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXDME6_N7100DBTDME2_N7100XXDME4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Any Ideas? Searched at XDA and Google but nothin related
That looks like you have the SDS bug... Not all the emmc is corrupt in your case, since you have access to download mode... On which android version did you experience your first crashes? 4.1.1 or 4.1.2?
pilzkopf92 said:
Thanks but Sadly... it doesnt
Here is what odin Tells me:
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXDME6_N7100DBTDME2_N7100XXDME4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Any Ideas? Searched at XDA and Google but nothin related
Click to expand...
Click to collapse
Flash .pit file with the firmware, not alone make sure re-partition is ticked. Also, it may be a strange question, but are U using Download Mode or Odin Download Mode? Try on another computer with fresh drivers installation and no Kies or other Samsung stuff running.

[Q] Odin FAIL! alert Note 2

I was attempting to root my Note 2 via CF-Autoroot and ODIN. I got this error message while attempting to root.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-t0ltevzw-t0ltevzw-schi605.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas on what I should do? I need to root my phone in order to unlock the APN entering option which Verizon hid.
Note 2 issues
Bump! Anyone? I need this done by tomorrow.

[Q] unbrick galaxy note 2 2sph l900/ flashing stock firmware

hi, today i was trying to downgrade from 4.4 to 4.3 but i think i messed up
anyways, im trying to flash "L900VPUBMK4_L900SPTBMK4_HOME.tar.md5" but i keep getting
on phone "sw rev.check fail. device:3, binary:2"
Code:
[SIZE="2"]<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sboot.bin
<ID:0/006>
<ID:0/006>
<OSM> All threads completed. (succeed 0 / failed 1)[/SIZE]
on newer odin i get
Code:
[SIZE="2"]<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L900VPUBMK4_L900SPTBMK4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)[/SIZE]
also i can access download mode and cwm recovery.
can any one help me??? plzzzz any help is apreciated
If you're on the latest NE2 firmware it is impossible to downgrade back to mk4 due to Knox boot loader, download the NE2 tar and flash it thru Odin... good luck! You might have to look for a partition fix posted by jlmancuso somewhere in a buried thread...
I was able to flash http://forum.xda-developers.com/showthread.php?t=2541395 using twrp and abd. After that i downloaded mobile odin and installed stock mk4
Sent from my SPH-L900 using XDA Free mobile app

<ID:0/004> NAND Write Start!! <ID:0/004> FAIL! <OSM> All threads completed. Note 2

<ID:0/004> NAND Write Start!! <ID:0/004> FAIL! <OSM> All threads completed. Note 2
Hello
i have a problem rooting my mobile samsung galaxy note 2 and now it is stuck in downloading mode .... before that it had a failure logging on always stuck on boot screen
i have installed
samsung drivers
odin 3
kies - had it closed always during the processes of odin
tried to restart / change usb cable and port
nothing seem to work now
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-t03g-t03gxx-gtn7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Please help .
thanks in advance
I recommend flashing back to a stock rom from sammobile.com to get a fresh start.

Categories

Resources