Hi
I got a big problem, my tablet Samsung galaxy Tab 3 sm-110
Well the problem its this :
-Reboot Loop
-Can't see the folder in my pc, because the MTP DEVICE USB cant install, And install Kies, but this dont work to me
I try the hard reset on him and appear the message "No Command"
Try Root the system with Odin v3.09 using CWR (T110.CWM.v6.0.4.8) & TWRP (T110.TWRP.2.7.0.1.tar), but dont work (FAIL)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T110.TWRP.2.7.0.1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Pls Somebody can help to solve this, I dont care if I lose the information
To be clear, when you try to do a normal start, you have a bootloop? And you can enter recovery?
My recommendation, at this point (with no further information), is to attempt to use the Kies emergency firmware installation method, or to obtain the full firmware package and flash it via ODIN/Heimdall.
Related
Hi,
I have GT-N7100 with official ROM. Few months ago I received an invitation to upgrade my ROM from 4.1 to 4.3
I have accepted the invitation and the upgrade was smooth and all was OK.
3 weeks ago I received another notification to update the ROM. It was also 4.3 and in the description it was mentioned as better stability.
I have accepted the invitation.
This time I started to get problems. The phone after reset got stuck on the first screen with the model name of "SAMSUNG GT-N7100".
I have HOME+POWER+VoluneUP and selected to clear all data to factory reset. - I still got the same stuck failure.
I tried to download various of official ROMs from sammobile (Hong Kong, UK, Israel, UAE) and install them with Odin3 but I got the same FAIL error in all of them.
Here is the log:
"<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100ZSUENA1_N7100OZSENA1_N7100ZSENA1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> tz.img
<ID:0/004> boot.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
"
On my phone I see the following text:
ODIN MODE
PRODUCT NAME: GT-N7100
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
KNOX WARRANTY VIOD: 0
AP SWREV: A2
I tried to use KIES --> Tools --> Emergency firmware recovery -->
But the "List of devices requiring emergency recovery" is empty
When I restart my phone I get the following message:
"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I don't know what else to do?
Can you advise?
Thanks,
Dror
Maybe your USB Debugging isn't enabled. Try flashing a custom rom if you have twrp or philz recovery installed.
joy854 said:
Maybe your USB Debugging isn't enabled. Try flashing a custom rom if you have twrp or philz recovery installed.
Click to expand...
Click to collapse
I am noob.
Can you explain me step by step what should I do?
I don't think that my "USB Debugging is enabled" cause I don't know how to enable it.
I don't have any access to HOME+POWER+VolumUP anymore.
dror.dahan said:
I am noob.
Can you explain me step by step what should I do?
I don't think that my "USB Debugging is enabled" cause I don't know how to enable it.
I don't have any access to HOME+POWER+VolumUP anymore.
Click to expand...
Click to collapse
Download philz recovery here http://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7100/philz_touch_6.07.9-n7100.tar.md5
Download odin v3.09. you can get it on google. Put your phone in download mode. Connect to your pc using a USB Cable.
Open Odin Select PDA as the md5 file which is the recovery. After installing recovery download a custom rom like DN3.
Put the zip file of ROM into your external sd card using a card reader. Open philz recovery by pressing Vol up, Home and Power buttons together.
Wipe data and factory reset. Flash the rom. Your phone should be fully functional by now.
HIT THANKS IF I HELPED YOU
joy854 said:
Download philz recovery here http://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7100/philz_touch_6.07.9-n7100.tar.md5
Download odin v3.09. you can get it on google. Put your phone in download mode. Connect to your pc using a USB Cable.
Open Odin Select PDA as the md5 file which is the recovery. After installing recovery download a custom rom like DN3.
Put the zip file of ROM into your external sd card using a card reader. Open philz recovery by pressing Vol up, Home and Power buttons together.
Wipe data and factory reset. Flash the rom. Your phone should be fully functional by now.
HIT THANKS IF I HELPED YOU
Click to expand...
Click to collapse
I have run Odin v3.09 with philz_touch_6.07.9-n7100.tar.md5:
"<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.07.9-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)"
Then I have pressed: Vol up, Home and Power buttons together and got the following message (see image attached):
"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
So I couldn't continue according to the rests of steps as you described.
dror.dahan said:
I have run Odin v3.09 with philz_touch_6.07.9-n7100.tar.md5:
"<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.07.9-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)"
Then I have pressed: Vol up, Home and Power buttons together and got the following message (see image attached):
"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
So I couldn't continue according to the rests of steps as you described.
Click to expand...
Click to collapse
I have once undergone through the same issue. If odin got succeded it can't say "Firmware upgrade encountered an issue". You must be able to access the recovery if odin got succeded.
joy854 said:
I have once undergone through the same issue. If odin got succeded it can't say "Firmware upgrade encountered an issue". You must be able to access the recovery if odin got succeded.
Click to expand...
Click to collapse
Well it didn't worked for me.
I tried to do it again but now I get a failure:
"<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.07.9-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
"
Can you help?
Hey guys, my GT-N7100 won't boot anymore. I tried to flash a rom with Odin on Windows coming from Cyanogenmod 4.4.
Now it won't boot and the only screens I can get are the Kies recovery, and Download mode. Every time I try to flash with Odin it fails when it is busy with [system.img]. I have tried multiple versions of Odin and multiple software versions. This is the latest I tried:
http://androidcentral.us/2014/04/ho...-2-gt-n7100-to-official-android-4-4-2-kitkat/
this is what Odin does:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUFND3_N7100OXAFND3_N7100XXUFND3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> tz.img
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help me!
Maybe it has something to do with downgrading from 4.4?
Hi,
a friend of mine got is Galaxy note 2 stuck on a bootloop and we doesn't know what happened. The phone doesn't boot to recovery, only to download mode.
I'm trying to solve his problem but i'me having a lot of difficulties.
I installed all the things needed to do a factory reset:
Install drivers;
Intall ADB & Fastboot
download firmwere from samsung
download MJ5 bootloader
pit file to repartition
downloaded odin 3.07;3.09;3.10
but every time i use any of the odin versions to change the bootloader ou flah the PDA i get the same error:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_N7100XXUEMJ5_1903221_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> param.bin
<ID:0/004> tz.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Can any one tell me what could my problem be?
Hi!
I was trying to root my SM-P605 with Odin 3.09. The USB drivers are installed, Odin finds the device on COM4 and I an trying to flash the image from RootGalaxyNote.com (http://rootgalaxynote.com/galaxy-note-10-1-root/how-to-root-galaxy-note-10-1-2014-edition/. The current firmware is P605ZSUCNE1 (it's 4.4.2 version).
When the process starts, it goes ok until "writing NAND" and then says that writing NAND fails. Can anyone help?
Thanks in advance,
vomus said:
Hi!
I was trying to root my SM-P605 with Odin 3.09. The USB drivers are installed, Odin finds the device on COM4 and I an trying to flash the image from RootGalaxyNote.com (http://rootgalaxynote.com/galaxy-note-10-1-root/how-to-root-galaxy-note-10-1-2014-edition/. The current firmware is P605ZSUCNE1 (it's 4.4.2 version).
When the process starts, it goes ok until "writing NAND" and then says that writing NAND fails. Can anyone help?
Thanks in advance,
Click to expand...
Click to collapse
Use odin 3.07
Nop...
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> autorootp600mj4.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> cache.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
vomus said:
Nop...
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> autorootp600mj4.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> cache.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
you said you had a p605 and your using a p600 firmware.... it should fail to flash
root?
moabizzi said:
you said you had a p605 and your using a p600 firmware.... it should fail to flash
Click to expand...
Click to collapse
If you are just looking to root your TABLET
Go download Towelroot read instructions *easy* click letitrain now you have root ,then go to playstore and get superSU.. during install It will popup a message normal or twrp hit normal /
install if you have KNOX just say yes or no i said no
done. *youtube it any questions*
Or just use the correct root file .... I believe Chainfire has one somewhere?
<ID:0/004> NAND Write Start!! <ID:0/004> FAIL! <OSM> All threads completed. Note 2
Hello
i have a problem rooting my mobile samsung galaxy note 2 and now it is stuck in downloading mode .... before that it had a failure logging on always stuck on boot screen
i have installed
samsung drivers
odin 3
kies - had it closed always during the processes of odin
tried to restart / change usb cable and port
nothing seem to work now
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-t03g-t03gxx-gtn7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Please help .
thanks in advance
I recommend flashing back to a stock rom from sammobile.com to get a fresh start.