Develop Bugs

[Q] My note II won't boot

Hi Every body:
That is really a bad day, just woke up this morning to find my device (was plugged for charging over night) to find it stuck at (GALAXY NOTE II N-7100)
tried several times to pull the battery and put it back hopefully to get it boot...but nothing happened.
I can access only the download mood and NO access to the custom recovery!!
I was running Android 4.1.1 WITH ROOT!
As advised in many other posts, tried to update to 4.1.2 using odin but the whole process failed with the following log:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXDMC3_N7100OJVDMC1_N7100XXDLK7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas and suggestions will be really appreciated.
Samsung maintenance in my place may take forever to get it fixed (almost 2 weeks!!)

Use odin 1.85 , check samsung usb drivers installed , exit kies, disable antivirus and firewall and try..

"<ID:0/004> Can't open the serial(COM) port." And try another usb port.
" Android 4.1.1" ?... Be careful about sudden death...

Primokorn said:
"<ID:0/004> Can't open the serial(COM) port." And try another usb port.
" Android 4.1.1" ?... Be careful about sudden death...
Click to expand...
Click to collapse
Thanks for the reply, really appreciate it..
I changed the USB port and got the following log from odin:
<OSM> N7100XXDMC3_N7100OJVDMC1_N7100XXDLK7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas?

drsayed_958 said:
Any ideas?
Click to expand...
Click to collapse
Did u try another Odin version? 1.85 or 3.04

Primokorn said:
Did u try another Odin version? 1.85 or 3.04
Click to expand...
Click to collapse
Tried both, got the same result.:crying:

You can flash with pit in Odin, it should work. The pit file can be found around here somewhere, can't find it for you right now.
Sent from my GT-N7100 using Tapatalk 2

http://forum.xda-developers.com/showpost.php?p=32273406
Not sure that it solves your issue.

same problem can anyone help ? no pit partition , or Can't open the serial(COM) port. , all drivers are installed i installed kies for driver the uninstalled without drivers

[Q] i317M bricked. Can't flash. Recovery mode not working.

I updated my i317M (Telus) via OTA and the next day it rebooted and went into boot loop.
I've tried flashing the phone with 4 different stock roms (from 4.1.2 to 4.4.2) but they all fail.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I317MVLBMA3_I317MOYABMA3_I317MVLBMA3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried flashing Philz Touch recovery but that fails as well.
I've tried to boot it into recovery mode but it shows a dead Android with error logs like "E:failed to mount"
Help?

goyagoyago said:
I updated my i317M (Telus) via OTA and the next day it rebooted and went into boot loop.
I've tried flashing the phone with 4 different stock roms (from 4.1.2 to 4.4.2) but they all fail.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I317MVLBMA3_I317MOYABMA3_I317MVLBMA3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried flashing Philz Touch recovery but that fails as well.
I've tried to boot it into recovery mode but it shows a dead Android with error logs like "E:failed to mount"
Help?
Click to expand...
Click to collapse
Try flashing with odin again but before flashing open the tar and remove the bootloader out of it.

Hi, thanks for the reply cnote.
Would the bootloader be sboot.bin or boot.img or both?
thanks again
edit: or rather, how do you remove the bootloader and remake the tar file?

goyagoyago said:
Hi, thanks for the reply cnote.
Would the bootloader be sboot.bin or boot.img or both?
thanks again
edit: or rather, how do you remove the bootloader and remake the tar file?
Click to expand...
Click to collapse
I believe it;s both. Just retrieve the tar file only.

sboot is the bootloader boot.img is the kernel .Have you tried the latest NH2 for your phone also maybe try using a pit file
The nh2 you will have to get from sammobile and the pit file can be found here http://forum.xda-developers.com/showthread.php?t=2609871
Also after odin is finished go into factory recovery and do a factory reset or its just going to sit at the boot screen

flashing pit file also gives an error :S

help me plz

plz help me its my phone not work
Only works on Samsung logo
It does not have a Recovery
its work in odin but
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> recovery-clockwork-6.0.4.8-serrano3gxx.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!

asmail4d said:
plz help me its my phone not work
Only works on Samsung logo
It does not have a Recovery
its work in odin but
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> recovery-clockwork-6.0.4.8-serrano3gxx.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
Click to expand...
Click to collapse
what do u want to flash?
it doesnt have recovery or costume recovery?
in the odin uncheck repartition.
plz give an screenshot from your odin in pc

I do not have recovery in phone

asmail4d said:
I do not have recovery in phone
Click to expand...
Click to collapse
ok.send screenshot from odin in pc.

plz any help

can rom startup normolly?
or have bootloop?
Sent from my GT-I9195

00ehsan00 said:
can rom startup normolly?
or have bootloop?
Sent from my GT-I9195
Click to expand...
Click to collapse
can not starup rom
add me skype baltan52

first download this :http://www.4shared.com/get/Gj80molBce/I9190.html?sop=true
this is pit file for i9190.
1. extract zip in your pc.
2. open odin and select pit and choose the pit file that u extracted.
3. make sure that repartition check-box is ticked.
4. select pda and choose a stock firmware of i9190.
5. press start.
but in this tutorial your phones memory be wiped

\
this is pit file for i9190.
1. extract zip in your pc.
2. open odin and select pit and choose the pit file that u extracted.
3. make sure that repartition check-box is ticked.
4. select pda and choose a stock firmware of i9190.
5. press start.
but in this tutorial your phones memory be wiped[/QUO
look He paused

what do u mean it paused?
wait a minute or two.if it freeze i dont have solution.
but it must work.there are no way
Sent from my GT-I9195
---------- Post added at 09:35 PM ---------- Previous post was at 09:32 PM ----------
do this work with only pit file
Sent from my GT-I9195

up up up

asmail4d said:
up up up
Click to expand...
Click to collapse
you do something wrong.
flashing pit file must fix it.
may be your drivers or usb cable have problem .
do this work in other pc if u can.
do you flash with only pit file?

S4 mini gt-i9192 stuck at donwload mode

Hi there,
I have run into this problem with my cellphone (S4 Mini gt-i9192). After it discharged, i connected it on the charger. My device failed to boot and got stuck at download mode ("Could not do normal boot" and mmc read fail). I've tried some procedures i found on the internet:
- flashing some original ROMs with and without PIT file
- hard reset
- wipe cache data
- boot thorugh recovery
The results vary, but I never got it a pass on Odin. Without a PIT file Odin displays "There is no PIT partition" and with PIT file, is displays:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Auto reboot and F. Reset Time are enabled with or without PIT file and Re-partition is only enabled with a PIT file. So, nothing out of usual for this part.
I also remark that I have never rooted it. I realize I should keep downloading stock ROMs and hope for a flash that works because there might a problem with my mmc, but maybe someone knows another procedure to recommend me. I appreciate all feedback and thank for it in advance. ALso, tell me if I didn't provide any info that could help solve this problem.

spontaneous bricking?

using a note 2 today and it just decided to reboot on its own, and then never got passed the splash screen. i have twrp recovery installed. booted into recovery and couldnt do anything. couldn't mount anything, wipe anything, restore anything. all storage showed 0MB. kept giving errors that it couldn't mount any partitions (cache, system, etc.) something with error 16.
i tried flashing a stock rom with odin. that failed. just seems like it is totally corrupted and nothing can be written to it.
how does something like that happen just randomly???? any way back from the dead?

Is the phone an AT&T Note 2? Where did you find the stock ROM for Odin?

audit13 said:
Is the phone an AT&T Note 2? Where did you find the stock ROM for Odin?
Click to expand...
Click to collapse
yes AT&T note 2.
the stock rom i got from a link on this forum. i tried this one first, I317-UCUCNJ2-Stock.tar.md5, then this one I317-UCUCNE5-Stock.tar.md5
also tried re-partitioning after with this pit file, i317.pit
i tried using Odin v1.85 and Odin 3.07

What is the error message in the Odin log?
Tried using different usb cables and usb ports with Odin?

audit13 said:
What is the error message in the Odin log?
Tried using different usb cables and usb ports with Odin?
Click to expand...
Click to collapse
just tried it, same result. odin log? you mean the message output? here it is for when i tried with and without PIT file
Code:
[B]No pit file[/B]
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I317-UCUCNE5-Stock.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.img
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
[B]With pit file[/B]
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I317-UCUCNE5-Stock.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..

Without the pit file, it's failing with the boot.img file and this may be fixed by using an oem Samsung cable or different usb 2.0 port. It could also be that the bootloader in the rom is not for the phone or the phone's current bootloader is newer than the bootloader being fished.

audit13 said:
Without the pit file, it's failing with the boot.img file and this may be fixed by using an oem Samsung cable or different usb 2.0 port. It could also be that the bootloader in the rom is not for the phone or the phone's current bootloader is newer than the bootloader being fished.
Click to expand...
Click to collapse
tried different cables and ports and another ROM, I317UCAMA4.. still fails.
i think it's a lost cause.

I'm sure you are correct but this phone shows up as an sgh-i317 in download mode?
Where did you get the ROMs? AT&T never released an Odin-flashable ROM after 4.1.2.

audit13 said:
I'm sure you are correct but this phone shows up as an sgh-i317 in download mode?
Where did you get the ROMs? AT&T never released an Odin-flashable ROM after 4.1.2.
Click to expand...
Click to collapse
yes it shows as sgh-i317 when in download mode
roms were gotten from wherever one gets roms i guess