Hi everyone, I'm new here and I need some help please.
I'm using Odin v3.04 to install CWM on my Galaxy grand duos, the phone reboots after installation but when I use the key combo, it takes me to the stock recovery.
My system's version is 4.2.2, It's not stock.. and I can't install stock roms because everytime they are zips, and when you extract them you don't get tar or md5 files.
What program should I use to install them? Thanks in advance
Here's what I get on odin when I install CWM:
<ID:0/014> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CWM-touch_i9082_chotu.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/014> Odin v.3 engine (ID:14)..
<ID:0/014> File analysis..
<ID:0/014> SetupConnection..
<ID:0/014> Initialzation..
<ID:0/014> Get PIT for mapping..
<ID:0/014> Firmware update start..
<ID:0/014> recovery.img
<ID:0/014> NAND Write Start!!
<ID:0/014> RQT_CLOSE !!
<ID:0/014> RES OK !!
<ID:0/014> Completed..
<ID:0/014> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/014> Removed!
ZeezoGT said:
Hi everyone, I'm new here and I need some help please.
I'm using Odin v3.04 to install CWM on my Galaxy grand duos, the phone reboots after installation but when I use the key combo, it takes me to the stock recovery.
My system's version is 4.2.2, It's not stock.. and I can't install stock roms because everytime they are zips, and when you extract them you don't get tar or md5 files.
What program should I use to install them? Thanks in advance
Here's what I get on odin when I install CWM:
<ID:0/014> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CWM-touch_i9082_chotu.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/014> Odin v.3 engine (ID:14)..
<ID:0/014> File analysis..
<ID:0/014> SetupConnection..
<ID:0/014> Initialzation..
<ID:0/014> Get PIT for mapping..
<ID:0/014> Firmware update start..
<ID:0/014> recovery.img
<ID:0/014> NAND Write Start!!
<ID:0/014> RQT_CLOSE !!
<ID:0/014> RES OK !!
<ID:0/014> Completed..
<ID:0/014> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/014> Removed!
Click to expand...
Click to collapse
This is because you are not flashing Fix-Recovery.zip with cwm right after flashing it through Odin, try this again
Take the recovery .tar file from here according to your firmware (4.1.2 or 4.2.2) : http://forum.xda-developers.com/showthread.php?t=2315529
Then follow this step by step instructions : http://forum.xda-developers.com/showpost.php?p=46395577&postcount=19
brother try trwp custom recovery if available for grand or any other custom recovery
good luck :good::good:
cwm on grand duos-
just uncheck the AUTO REBOOT option in ODIN,
when ODIN is just done , simply remove your battery,
no need to flash fix recovery,,
try what i said
TWRP recovery flashable via odin
give it a shot buddy
good luck :good::good::good:
Related
UPDATE: I was able to flash JB Update using odin 3 v185.[/B So problem is fixed.
I was trying to update my T999 via Kies to stock JB BUT update failed during the process. I believe I am in download mode
I see on the top
ODIN MODE (in red color)
PRODUCT NAME: T999
Custom Binary Download: Yes ( 1 Counts )
Current Binary: Custom
System Status:Custom
How do I restore this phone back to normal? I was trying to install stock jb via kie.
Thank you!
My suggestion is odin.
http://forum.xda-developers.com/showthread.php?t=1949687
mt3g said:
My suggestion is odin.
http://forum.xda-developers.com/showthread.php?t=1949687
Click to expand...
Click to collapse
Thank you, I just tried but no go; Odin failed.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T999UVDLJA_T999TMBDLJA_T999UVDLJA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> cache.img.ext4
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
I used Odin3 v.3.07 and PDA the factory filmware for Mobilicity in Canada, I still have a Fail message when I used Odin to restore to 4.1.1, please HELP! Thanks!
Added!!
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
KIES_HOME_T889UVALK8_T889TMBALK8_598701_REV04_user_low_ship.tar.md5 is valid.
Checking MD5 finished Sucessfully..
Leave CS..
Odin v.3 engine (ID:4)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
boot.img
NAND Write Start!!
recovery.img
system.img
modem.bin
FAIL!
All threads completed. (succeed 0 / failed 1)
I installed Jellykat rom V4
and was using twrp recovery ...
I tried a few roms for installation Like (cm10 nightlies, ressurection remix) But everytime it was showing faliure in installation in recovery
So i decided to switch to CMW recovery.
i m using odin v3.07
i tried flashing CMW 6 touch , it installed but ,before it showed pass i removed my device
and after that when i try to open recovery it stucks on showing "SAMSUNG GALAXY NOTE 2 GT-N7100 "
and when i tried to flash another recovery(a previous version 5.08) or the same it shows FAIL in odin
So i m stuck with this rom and cannot access my recovery.
NEED HELP
please someone who knows how to solve HELP ME!!!!!:fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:
here is the log when i reied out cmw 5.08
"<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_5.08.5-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
"
Try flashing a stock rom via odin. This will restore your stock recovery and you can further change it according to your needs. Then you can try out other roms.
Hi!
I was trying to root my SM-P605 with Odin 3.09. The USB drivers are installed, Odin finds the device on COM4 and I an trying to flash the image from RootGalaxyNote.com (http://rootgalaxynote.com/galaxy-note-10-1-root/how-to-root-galaxy-note-10-1-2014-edition/. The current firmware is P605ZSUCNE1 (it's 4.4.2 version).
When the process starts, it goes ok until "writing NAND" and then says that writing NAND fails. Can anyone help?
Thanks in advance,
vomus said:
Hi!
I was trying to root my SM-P605 with Odin 3.09. The USB drivers are installed, Odin finds the device on COM4 and I an trying to flash the image from RootGalaxyNote.com (http://rootgalaxynote.com/galaxy-note-10-1-root/how-to-root-galaxy-note-10-1-2014-edition/. The current firmware is P605ZSUCNE1 (it's 4.4.2 version).
When the process starts, it goes ok until "writing NAND" and then says that writing NAND fails. Can anyone help?
Thanks in advance,
Click to expand...
Click to collapse
Use odin 3.07
Nop...
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> autorootp600mj4.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> cache.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
vomus said:
Nop...
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> autorootp600mj4.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> cache.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
you said you had a p605 and your using a p600 firmware.... it should fail to flash
root?
moabizzi said:
you said you had a p605 and your using a p600 firmware.... it should fail to flash
Click to expand...
Click to collapse
If you are just looking to root your TABLET
Go download Towelroot read instructions *easy* click letitrain now you have root ,then go to playstore and get superSU.. during install It will popup a message normal or twrp hit normal /
install if you have KNOX just say yes or no i said no
done. *youtube it any questions*
Or just use the correct root file .... I believe Chainfire has one somewhere?
Hi everyone,
My N7100 may be hard brick
i can open download mode, tried to install CMW or Touchwiz Recovery with Odin v3.04 but there is a FAIL.
Someone can help 2me?
I search on the internet this problem. There is written 'U have2 change eMMC module. '
Thnx4 replies.
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_5.00.5-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> recovery.img
<ID:0/011> NAND Write Start!!
<ID:0/011>
<ID:0/011> Complete(Write) operation failed.
<ID:0/011> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Are you trying to flash the latest stock ROM from sammobile.com or updato.com?
Tried using Odin 3.07?
Tried different USB cables and USB ports?