Develop Bugs

Odins Fails (Trying to Restore to Stock)

<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T989UVMC6_T989TMB_T989UVMC6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have a telus/koodo s2x
I have samsung kies installed and I run odin as admin. I have the adb drivers installed as well...
What do you guys think I can do?

Looks as if you have the wrong firmware file. The file you are using is for the T989 T-Mobile USA variant. You need to flash the firmware for the T989D Telus variant.

akeem127 said:
Looks as if you have the wrong firmware file. The file you are using is for the T989 T-Mobile USA variant. You need to flash the firmware for the T989D Telus variant.
Click to expand...
Click to collapse
Oh my... I didn't think it would be as simple as that. I'll try to find the telus variant.

CWM Recovery not getting installed

Hi everyone, I'm new here and I need some help please.
I'm using Odin v3.04 to install CWM on my Galaxy grand duos, the phone reboots after installation but when I use the key combo, it takes me to the stock recovery.
My system's version is 4.2.2, It's not stock.. and I can't install stock roms because everytime they are zips, and when you extract them you don't get tar or md5 files.
What program should I use to install them? Thanks in advance
Here's what I get on odin when I install CWM:
<ID:0/014> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CWM-touch_i9082_chotu.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/014> Odin v.3 engine (ID:14)..
<ID:0/014> File analysis..
<ID:0/014> SetupConnection..
<ID:0/014> Initialzation..
<ID:0/014> Get PIT for mapping..
<ID:0/014> Firmware update start..
<ID:0/014> recovery.img
<ID:0/014> NAND Write Start!!
<ID:0/014> RQT_CLOSE !!
<ID:0/014> RES OK !!
<ID:0/014> Completed..
<ID:0/014> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/014> Removed!

ZeezoGT said:
Hi everyone, I'm new here and I need some help please.
I'm using Odin v3.04 to install CWM on my Galaxy grand duos, the phone reboots after installation but when I use the key combo, it takes me to the stock recovery.
My system's version is 4.2.2, It's not stock.. and I can't install stock roms because everytime they are zips, and when you extract them you don't get tar or md5 files.
What program should I use to install them? Thanks in advance
Here's what I get on odin when I install CWM:
<ID:0/014> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CWM-touch_i9082_chotu.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/014> Odin v.3 engine (ID:14)..
<ID:0/014> File analysis..
<ID:0/014> SetupConnection..
<ID:0/014> Initialzation..
<ID:0/014> Get PIT for mapping..
<ID:0/014> Firmware update start..
<ID:0/014> recovery.img
<ID:0/014> NAND Write Start!!
<ID:0/014> RQT_CLOSE !!
<ID:0/014> RES OK !!
<ID:0/014> Completed..
<ID:0/014> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/014> Removed!
Click to expand...
Click to collapse
This is because you are not flashing Fix-Recovery.zip with cwm right after flashing it through Odin, try this again
Take the recovery .tar file from here according to your firmware (4.1.2 or 4.2.2) : http://forum.xda-developers.com/showthread.php?t=2315529
Then follow this step by step instructions : http://forum.xda-developers.com/showpost.php?p=46395577&postcount=19

brother try trwp custom recovery if available for grand or any other custom recovery
good luck :good::good:

cwm on grand duos-
just uncheck the AUTO REBOOT option in ODIN,
when ODIN is just done , simply remove your battery,
no need to flash fix recovery,,

try what i said
TWRP recovery flashable via odin
give it a shot buddy
good luck :good::good::good:

[Q] Galaxy Note sgh-i317 stuck on boot

Hi,
I am currently using some Samsung Galaxy Note II SGH-I317's and am trying to install a "dual persona image" onto the device. When doing this, the device has gone into screwy mode where i am unable to enter into recovery mode. The key sequence simply doesnt work. I am able to enter into ODIN (download) mode with no issues, but not into recovery.
When i try to install the base image back onto the device using ODIN i get a fail each time. Below is the output from ODIN:
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N5110UEEMF2_N5110XAREMF2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> sboot.bin
<ID:0/011> NAND Write Start!!
<ID:0/011>
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I would like to be able to return back to the factory default android, anyone with any bright ideas?
thanks in advance.
Ben

[Q] 4.3 Tmobile ROM won't load on I747

I have a I747 that I am converting to TMobile. I've been mostly successful, but I have not been able to load the TMobile 4.3 ROM on it. Help!
It's a T999 that I put a I747 motherboard in. I unlocked the phone, put in a tmo sim, set up fast.t-mobile. So far so good.
I have been utterly unable to load the TMobile ROM.
I was able to use Odin 3.07 to root the phone, using
CF-Auto-Root-d2can-d2vl-sghi747m.tar, so Odin talks to the phone just fine. After doing this, SuperSU disabled Knox just fine. The phone is currently on 4.3.
But when I use T999UVUENC2_T999TMBENC2_T999UVUENC2_HOME.tar.md5 to load Tmobile 4.3, I get a SB12 error on the phone. Odin gives me this error:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T999UVUENC2_T999TMBENC2_T999UVUENC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sbl2.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
If anyone can help, I would be most appreciative. And if anyone can point me to a thread where this was already discussed, I would happily swallow my pride and Do Another F'ing Search.

my N7100 dont open stuck on Samsung Logo

Hi everyone,
My N7100 may be hard brick
i can open download mode, tried to install CMW or Touchwiz Recovery with Odin v3.04 but there is a FAIL.
Someone can help 2me?
I search on the internet this problem. There is written 'U have2 change eMMC module. '
Thnx4 replies.
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_5.00.5-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> recovery.img
<ID:0/011> NAND Write Start!!
<ID:0/011>
<ID:0/011> Complete(Write) operation failed.
<ID:0/011> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)

Are you trying to flash the latest stock ROM from sammobile.com or updato.com?
Tried using Odin 3.07?
Tried different USB cables and USB ports?