Related
VIPER Rom V1.2
This Rom tested for hundred times but im not take any responsibility for bricked devices.You can also flash Viper kernel on other stock based roms.
Features
Bassed on D802 20F ROM
Aroma installer
init.d support
SuperSU
Busybox+runparts
Odexed,Debloated,Zipaligned
Selectable camera (Xdabbeb's camera and stock)
Knock code support
Kernel is bassed on latest LG KK Source
Compiled with Lianro 4.8
CPU OC up to 2.5 GHz
CPU Voltage Control
Sweep2sleep
Zram
Governors
Ondemand
Performance
Powersave
Userspace
Conservative
i/o schedulers
ROW
CFQ
NOOP
DAEDLINE
Changelog
V1.2
Fixed Knock code problem
Fixed fastboot problem on some variants (It should get fixed 99% but not tested so test and report me.)
Added support for Canadian and Korean variants
Added sweep2sleep support
Replaced devil kernel manager with Kernel Tuner
Updated kernel base to 20b
Better battery performance
Removed lots of unuseless LG apps
V1.1
Upadated rom base to 20F
Added support for T-mobile,AT&T,Verizon and Sprint varients
Added knock code support
Now you can choose between stock camera and xdabbebs (in Aroma)
Some kernel improvments
Rom stability improved
V1.0
initial release
Installation
Full Wipe (Dalvik, Cache, System & Data)
Flash KitKat baseband
Install Viper Rom
Chose your device model and favorite apps in Aroma
Enjoy
Credits
Tnx @pedja1 For his awesome kernel configer app (Kernel Tuner)
Tnx @alireza7991 For his great helps (specialy in Zram)
Tnx @Cloudyfa For some of his Aroma scripts.
Tnx @xdabbeb For his nice camera.
Note
1- If you had any problem with knock on call 3845#*800x#* to open hidden settings.Then go to settings<Update Touch Firmware and you are done.
2-If you want a faster rom,enable developer options then change Window,Transition and Animator to .5x
3-There is a script in init.d folder (/system/etc/init.d) named CPU_CONFIG.This script Keeps CPU frequency on 2.26GHz while device is booting to avoid high temperature on boot.If you want a faster boot you can remove this script to boot up with 2.5 GHz (Not Recommended).
Supported models
Code:
D800,D801,D802,D803,D805,D806,F320K,F320L,F320S,LS980,VS980
Downloads
All downloads here
Kernel source code
Wow, awesome, a new DEV, welcome, will test the kernel, and will report soon.
What a fast response!!Thanks for testing.
Why 20a base? Lg make some update and now there is 20f base. Have a knock code this rom ?
Please add picture from Rom
Gesendet von meinem LG-D802 mit Tapatalk
all_x said:
Why 20a base? Lg make some update and now there is 20f base. Have a knock code this rom ?
Click to expand...
Click to collapse
I used older rom beacuse of some problems but i will use the new rom as soon as possible.And no there is no knock code.
cobra11111 said:
Please add picture from Rom
Gesendet von meinem LG-D802 mit Tapatalk
Click to expand...
Click to collapse
Screenshots added
I ran ViperOne on the HTC One M7, definitely going to check this out.
Not right now because of other things that need attention first, but definitely soon
glad to see something new. Welcome ,if I will change from I definitely try this one. And maybe in few days kernel too.keep it up
I have to try it, even though i am not into stock ROMs. I think no ROM should be ignored(if it's pretty stable) to encourage devs. I'll let other know about it?
Awesome man i love how the modding of this phone is increasing
This rom supose to be great, gonna test it soon as possible and make video review
Hey. Can I take your Kernel for my cloudyG3 Rom?
Thx
Sent from my LG-D802 using XDA Free mobile app
No D800?
c_brown93 said:
No D800?
Click to expand...
Click to collapse
Read the op till you figure out how redundant this question was.
Sent from my Vs980
serial1005 said:
Hey. Can I take your Kernel for my cloudyG3 Rom?
Thx
Sent from my LG-D802 using XDA Free mobile app
Click to expand...
Click to collapse
Of course you can.I tested this kernel on cloudyg3 and its also works on any stock bassed rom.(Please read op first)
Can U please not include camera mod in next version? Everyone including it, even if it can be done by yourself very easy... And I need stock camera, because this modded one, give me black screen 1-2 times a day. Accualy when I need camera most and need to reboot device to get it work. And thing that need to take photo at is away for good.
I assume this ROM is not associated with team venom who actually releases viper rom and are recognized as developers for HTC..
fuxmen said:
Can U please not include camera mod in next version? Everyone including it, even if it can be done by yourself very easy... And I need stock camera, because this modded one, give me black screen 1-2 times a day. Accualy when I need camera most and need to reboot device to get it work. And thing that need to take photo at is away for good.
Click to expand...
Click to collapse
There is no defference between stock camera and xdabbeb's camera beacause he just added some new features but he didnt change settings for normal recording and capturing and i tested it a lot and i didnt see any black screen
waiting for the version which supports Knock Code
First things first.
***I AM NOT BY ANY MEANS an ANDROID or C DEV*** in fact I am a QA however I do have development experience in other languages.
That being said I do own and daily use a SM-G925W8 and this is currently very stable, now onto the details.
This is a port/merge of AndreiLux's Perseus7420 Kernel for the north american s6 Edge.
I did not write this Kernel, all I did was adapt the kernel from the G920F to the G925W8 version.
more specifically I merged the changes present from G920F -> G925F and applied them to the source code from G925W8
then merged that into AndreiLux's ref-3.10 branch https://github.com/AndreiLux/ref-3.10.
Built the kernel, applied the same ramdisk changes that AndreiLux's kernel has and repacked the boot.img
So here you go.
The Perseus7420 kernel that was previously only available for the non edge F variant is now available to use on the canadian variant.
I have tested it all day and this thing is very very stable.
What works:
Call Audio (w8/t have a secondary sound chip ES705 which needs to be explicitly enabled in the defconfig)
Everything else AndreiLux implemented, including full voltage control for all cpu cores,gpu,memory,internal busses please see his change log here: https://github.com/AndreiLux/ref-3.10/releases
What doesnt work:
-nothing?
-you tell me
-still testing
-****I have no idea if this actually works on SM-G925T but it verymuch should... I only have the W8 variant***
I will attempt to keep this up to date and merge in any new changes Andrei releases's as this phone is my dd and I like awesome battery life and stability.
Please note. DO NOT FLASH THIS zip!!!! YOU MUST EXTRACT IT
This image file must be flashed with either:
1) dd if=/path_to_image/boot.img of=/dev/block/sda# <- your boot sector
2) or in twrp you can flash an image instead of a zip by clicking images in the bottom right corner of twrp, then selecting boot.img then the boot radio box before hitting flash.
3) flashify
Updated kernel, can boot s6E+ rom, fixed call audio, now this is a flashable zip.
in all cases backup your current boot image first.
and of course im not liable for anything you break.
thanks for checking out my merge of AndreiLux's kick ass kernel
gundal
of course special thanks to AndreiLux for authoring a lot of these awesome changes and give us this wonderful kernel.
1st reserve
2nd reserve
3rd reserve
4th
Will try it out brother... thanks for the contribution
Trying now
---------- Post added at 05:58 AM ---------- Previous post was at 05:51 AM ----------
Booted on note 5 port.
No call audio even after flashing fix. Had to switch. Kernel is great though so far
really no call audio? and you are g925w8 or T? @ktetreault14
gundal said:
really no call audio? and you are g925w8 or T? @ktetreault14
Click to expand...
Click to collapse
G925T. And S6E+ rom located in Galaxy S6 Edge forums
ktetreault14 said:
G925T. And S6E+ rom located in Galaxy S6 Edge forums
Click to expand...
Click to collapse
Finally got around to installing that e+ rom, it broke my call audio too, merged in some commits from arter and andrei and call audio is back and this is working on Sixperiencev2.0 rom
updated the main thread with a zip file that can now be flashed directly from recovery.
test it out of you can @ktetreault14
re: S6E+ rom
ktetreault14 said:
G925T. And S6E+ rom located in Galaxy S6 Edge forums
Click to expand...
Click to collapse
Are you saying that this rom is compatible with the Galaxy S6+ with the G928T phone?
Have a great day!
@Misterjunky
No I am saying this KERNEL is compatible with the s6E+ rom that was ported to the S6 Edge.
its a rom called SIXPERIENCE v2.0
it will run on Sm-G925T/W8 and this kernel will boot it or normal 5.1.1 for G925
gundal said:
Finally got around to installing that e+ rom, it broke my call audio too, merged in some commits from arter and andrei and call audio is back and this is working on Sixperiencev2.0 rom
updated the main thread with a zip file that can now be flashed directly from recovery.
test it out of you can @ktetreault14
Click to expand...
Click to collapse
Awesome! Downloading now. Any other changes?
Wow, I'm in love with this. For those who don't know, the kernel has an awesome 8-band EQ that can be independently configured for right/left channels as well as the capability to modify the voltage of the CPU, GPU, and various busses. It also allows for fine-grain color calibration. All of the settings are available via Synapse. Installed and working great on my g925t.
Forgot that system and cache are formatted to f2fs. i can't test until new rom comes out when I do clean wipe.
I have a 925T T-Mobile variation edge with S6 edge+ V2.0 Port ROM running with no call issues or any other issues. However I was wondering if your kernel will give me back WiFi Calling or is that not kernel related?
GodfatherSadri said:
I have a 925T T-Mobile variation edge with S6 edge+ V2.0 Port ROM running with no call issues or any other issues. However I was wondering if your kernel will give me back WiFi Calling or is that not kernel related?
Click to expand...
Click to collapse
That will only come back if/when that rom is based on t-mobile firmware.
Sent from my SM-G928F using Tapatalk
Can't get it to boot at all with either philz nor twrp. Won't make it past kernel not enforcing screen. I switched back to ext4 and the Note 5 rom
I'll flash now im on crash v2.1 I'll let you know if it works for me
---------- Post added at 06:39 PM ---------- Previous post was at 06:24 PM ----------
Worked just fine on my 925t on crash rom 2.1 but why are my colors like dull now...... Does this have some type of color fix ? or fade of some type ? lol
call audio works fine
**************************************************
[ROM] 6045Y-DCZ
current version 2.2 (2016-08-09)
STOCK, STABLE, FAST, ROOT
**************************************************
FOR NOW IT IS ONLY FOR SINGLE SIM DEVICES!! DUAL SIM NOT WORKING
-it is not exactly a build. Its more a mod.
-based on latest Alcatel IDO 3 5.5 6045Y MMB29M EUROPE UPDATE
-including ROOT (latest supersu 2.76)
-removed all unnecessary apps from Alcatel. there is only the necessary basic to run the phone. All other things you can download by yourself.
-Due to source is the avaliable set of languages shrinken to English, German, Slovak and Czech. But More Locale 2 app (included) will do the trick for you on most apps.
GUIDE:
-Its always better to flash this upon a stock firmware. You can try to flash it upon custm roms like CM AOKP etc, but since i havent tested it, i dont know if it will 100% work
-download firmware and also the MD5 checksum and copy both files to your phone.
-go to TWRP recovery (please make sure you use the @Unjustified Dev version from here
-make backup of your current ROM
-here you can grab a bat file to make backup of your curent MODEM, or download your MODEM in a zip file. Don´t forget to thank @famewolf for the time he spends to gather the modems.
-If you hav ebackup of oyur curent modem, just open my ROM zip in a ZIP app (i use 7zip). Replace the non-hlos.bin with your non-hlos.bin (modem) file.
-copy the ROM (and if you choose the modem zip file from @famewolf )
-wipe chache/dalvik/system/data
-format data (just to be sure. Format data is something diferent than wipe data)
-install ROM (make sure you have MD5 check enabled and it gives no error)
-reboot
-on first boot be patient it takes a while after the first boot (about 5 minutes) untill the ROM settles down
DOWNLOAD:
From my google disk
ISSUES:
-on my 6045Y i have no issues so please report
changelog in 2.2 build (2016-08-09)
-parallax background on stock launcher (looks great)
-translucent appdrawer background
-cleared updater-script of useless lines
changelog in 2.1 build (2016-08-08)
-build from latest 6045Y 010 06 update (6045Y MMB29M EUROPE UPDATE)
-no need to do some silly unmount and mount crap, because i know how to write the updater-script
-Root (systemless) included, GAPPS included (as this is just a moded stock ROM)
-Debloated 6.0.1 version..lockscreen is working well for my on 6045Y
-Background wallpaper from Vikas Kanwal (no stealing from web)
-Included 6045Y modem, so if you are on non 6045Y version see above to get your corespondent modem zip fle or image file before you start flashing.
-Security patch for 6.0.1 (from 2016-1-7)
-Double tap on lock screen to sleep
-Launcher 5x6 and dock 5x grid (instead of 4x5)
-lcd density set to 430
-USB debuging enabled from first boot
-Color temperature setting
-Technicolor enhanced colors
-Call recorder - when you are in a call you can tap on the three dots on the right and record the call
-Multi window enabled (under sttings/developer option)
-Glove mode (higher sensitivity of touchscreen)
-Three fingers swipe to make screenshot
CREDITS:
@Unjustified Dev , @famewolf , @The Marionette, without them there will be no IDOL 3 5.5 develpment, so pelase give them a thnax!
And of course i am not responsible for any damage you do by flashing this on your device!
DallasCZ said:
**************************************************
[ROM] 6045-i806-DCZ
current version 1.0
STOCK, STABLE, FAST, ROOT
**************************************************
-it is not exactly a build. Its more a mod.
-based on latest TCL i806 (IDOL3) firmware (JSU_I806-2[ABC]LCCN7_7TMBRCB3)
-I exchanged the kernel for the ARDE DEV TEAM STOCK OC one (4x1651 MHz + 4x1601 MHz).
-Antutu player will love the 37K ratings (all cores set to performance Governors)
-including ROOT (latest supersu 2.52)
-added KERNEL ADIUTOR
-removed all unnecessary apps from TCL. there is only the necessary basic to run the phone. All other things you can download by yourself. So the ROM is only 600 MB on size.
-Due to source is the avaliable set of languages shrinken to English and Chineese. But More Locale 2 app (you can download form google play) will do the trick for you on most apps.
GUIDE:
-go to TWRP recovery
-wipe chache/dalvik/system/data
-install ROM
-install GAPPS (i use open gapps 5.0 nano)
-reboot
-on first boot be patient it takes a while after the first boot (about 5 minutes) untill the ROM settles down
DOWNLOAD:
From my google disk (size aprox 600 MB)
ISSUES:
I dont know of any, you tell me.
FUTURE PLANS:
-merge another languages from framework res, settings, systemUI apks . As i am not a DEV i will repack the apks adding these languages it should work with more locale 2 then. I cannot add the language support to the rom itself.
-replace the i806 launcher with one from 6045Y (will do need more tests because of lags of the 6045Y launcher).
-add some minor build.prop tweaks
CREDITS:
BIG thnax to @franq36 of ARDE DEV Team for the Kernel, also thank @Grarak for the Kernel Adiutor.
Click to expand...
Click to collapse
Nice work! Does your version allow wifi to be enabled while in airplane mode? Are you changing the model to something unique like x806 to prevent updates from trying to be downloaded/installed that could affect partitions beyond system/boot? Did you remove the system update checker? Have you modified or eliminated the default updater-script in the stock i806 rom which clobbers several partitions beyond system and boot?
famewolf said:
Nice work! Does your version allow wifi to be enabled while in airplane mode? Are you changing the model to something unique like x806 to prevent updates from trying to be downloaded/installed that could affect partitions beyond system/boot? Did you remove the system update checker? Have you modified or eliminated the default updater-script in the stock i806 rom which clobbers several partitions beyond system and boot?
Click to expand...
Click to collapse
-yes wifi can be turned on while in airplane mode
-i deleted update checker app, so there are no updates
-yes i deleted all entries that were messing around with radio etc.. So now this script only format and copy system, busybox, root, kernel thats all. So it should be also suitable for 6045I version. I can enable the double sim stuff in build.prop so this should work also for 6045K version.
DallasCZ said:
-yes wifi can be turned on while in airplane mode
-i deleted update checker app, so there are no updates
-yes i deleted all entries that were messing around with radio etc.. So now this script only format and copy system, busybox, root, kernel thats all. So it should be also suitable for 6045I version. I can enable the double sim stuff in build.prop so this should work also for 6045K version.
Click to expand...
Click to collapse
Sounds like you have all the bases covered! What a shame we can't get multirom to work on our device YET....it would allow us to use our external sd to swap between multiple roms and I could have cm12.1, yours and whatever new one I'm testing all going at the same time. Multirom also has it's own custom build of twrp that supports the roms.
i know i have used MULTIROM on my older devices...
DallasCZ said:
i know i have used MULTIROM on my older devices...
Click to expand...
Click to collapse
You may want to look back to your source and see if they do an unmount of /persist at the end. You have left in the code which format's it and extracts the wifi drivers then symlinks them but I didn't see an unmount so it may have gotten accidentally deleted. It may be unnecessary but normally for every mount you have an unmount as it can leave partitions mounted in twrp that could cause issues if the user installs packages after the current one.
Hmm I guess I should also confirm for the 6045i users that you are using the "group 2" kernel? If not, 6045i users will need to flash the group 2 kernel right after flashing the rom before they reboot..not a big deal but if necessary a link to it in post #1 might help. Looking forward to trying this one since the i806 rom had such better performance for the idol3 than the default roms.
famewolf said:
You may want to look back to your source and see if they do an unmount of /persist at the end. You have left in the code which format's it and extracts the wifi drivers then symlinks them but I didn't see an unmount so it may have gotten accidentally deleted. It may be unnecessary but normally for every mount you have an unmount as it can leave partitions mounted in twrp that could cause issues if the user installs packages after the current one.
Click to expand...
Click to collapse
My fault i wrote twice unmount system.... hmm thats when you make such things at 2:00 AM
thanx bro.
DallasCZ said:
**************************************************
[ROM] 6045-i806-DCZ
current version 1.0
STOCK, STABLE, FAST, ROOT
**************************************************
-it is not exactly a build. Its more a mod.
-based on latest TCL i806 (IDOL3) firmware (JSU_I806-2[ABC]LCCN7_7TMBRCB3)
-I exchanged the kernel for the ARDE DEV TEAM STOCK OC one (4x1651 MHz + 4x1601 MHz).
-Antutu player will love the 37K ratings (all cores set to performance Governors)
-including ROOT (latest supersu 2.52)
-added KERNEL ADIUTOR
-removed all unnecessary apps from TCL. there is only the necessary basic to run the phone. All other things you can download by yourself. So the ROM is only 600 MB on size.
-Due to source is the avaliable set of languages shrinken to English and Chineese. But More Locale 2 app (you can download form google play) will do the trick for you on most apps.
GUIDE:
-go to TWRP recovery
-wipe chache/dalvik/system/data
-install ROM
-install GAPPS (i use open gapps 5.0 nano)
-reboot
-on first boot be patient it takes a while after the first boot (about 5 minutes) untill the ROM settles down
DOWNLOAD:
From my google disk (size aprox 600 MB)
ISSUES:
I dont know of any, you tell me.
FUTURE PLANS:
-merge another languages from framework res, settings, systemUI apks . As i am not a DEV i will repack the apks adding these languages it should work with more locale 2 then. I cannot add the language support to the rom itself.
-replace the i806 launcher with one from 6045Y (will do need more tests because of lags of the 6045Y launcher).
-add some minor build.prop tweaks
CREDITS:
BIG thnax to @franq36 of ARDE DEV Team for the Kernel, also thank @Grarak for the Kernel Adiutor.
Click to expand...
Click to collapse
I participate in the development but the creator of the kernel is @acura2201 should also include in the credits, also a link to the original kernel thread in HTCMania
thx,good job
Does this ROM support all the variants?
Sent from my 6045X using XDA Forums Pro.
The Marionette said:
Does this ROM support all the variants?
Sent from my 6045X using XDA Forums Pro.
Click to expand...
Click to collapse
As it does not rewrites original recovery neither radio files it should be good to all variants, but I have not tested (only on my 6045Y).
the second thing is the OC kernel from HTCMANIA.com if it will be working on 6045I,6045O nad 6045K variants.
If someone with dual sim (K version) would try it and has no dual sim options there have to be a slightly build.prop modification. Just change line "persist.radio.multisim.config=single" to "persist.radio.multisim.config=dsds".
someone should try...If he made a full TWRP backup, there is nothing to worry about (i think)
famewolf said:
Hmm I guess I should also confirm for the 6045i users that you are using the "group 2" kernel? If not, 6045i users will need to flash the group 2 kernel right after flashing the rom before they reboot..not a big deal but if necessary a link to it in post #1 might help. Looking forward to trying this one since the i806 rom had such better performance for the idol3 than the default roms.
Click to expand...
Click to collapse
You re right as always i mentioned it on 1st post.
DallasCZ said:
Suprisingly no. I used the group1 OC kernel and i am running on it since yesterday and no hicups,lags or reboots.
Click to expand...
Click to collapse
*removed half asleep post since you had already added link to post #1*
I'm surprised the chinese rom had higher antutu scores than cyanogenmod but I'm looking forward to having a rom that flips "upside down" properly.
Edit: Disregard what I said below, I just looked at the page again without it being translated and found the link, I think. Wow, translators really make a mess of a page. Is this the correct file/img...."Nuevoboot_Alcatel_V1.img"?
I'd like to try this but the link to HTC Mania translates horribly, it's a absolute mess. I cannot find the download link for the Group 2 OC Kernel (6045i) anywhere on that page. Can direct links be posted?
Hmm, so I have cm12.1 11/23 running, and its rebooting alot more than it was yesterday Lol. I am running the group 1 oc. Is that the right one? I think it is, so hmm. Is it worth switching back to stock?
anyone with other model than 6045Y should download the Nuevoboot_Alcatel_V1.img as I understood.
Odesláno z mého 6045Y pomocí Tapatalk
DallasCZ said:
anyone with other model than 6045Y should download the Nuevoboot_Alcatel_V1.img as I understood.
Odesláno z mého 6045Y pomoc�* Tapatalk
Click to expand...
Click to collapse
Well, I have tried that one as well, and it doesn't boot. So I guess its for stock ROM? Haha.
Disregard previous information, apparently the kernel in the thread changed somewhat since the last time I downloaded it. Testing again, boots up with the group 2, will report back.
capeorigins said:
Hmm, so I have cm12.1 11/23 running, and its rebooting alot more than it was yesterday Lol. I am running the group 1 oc. Is that the right one? I think it is, so hmm. Is it worth switching back to stock?
Click to expand...
Click to collapse
You should talk about cm in the cm thread..thats what it's for. Group 1 and group 2 is only for "stock" roms. the i806 falls under "stock rom". Roms like cyanogenmod should be running the CM kernel on that page. It's part of the name and not either of the groups.
---------- Post added at 09:39 PM ---------- Previous post was at 09:34 PM ----------
@DallasCZ
What min/max/governor are you choosing for big & little in KA?
Ok... so:
6045i
- Full Wipe
- Installed without kernel, then hit reboot
- Rebooted straight to TWRP, said OS not installed. Installed over it, rebooted.
- Booted up, went through settings, then froze when Supersu free dialog box popped up
- Installed Nuevoboot_Alcatel_V1, and open_gapps-arm64-5.0-micro-20151124
- Booted up fine, no play service issues of any kind
- Ran AnTuTu 64-bit with big/little on performance (1651 and 1113), score 33,625
Can't fathom why the 6045Y would score almost 3,500 more on AnTuTu. Made sure there was no thermal throttling by placing phone in front of air conditioner.
Edit: Seems the 6045Y can throttle the little up to 1601, whereas my 6045i maxes at 1113? I'd assume that is where the extra 3,500 in AnTuTu is coming from. Odd, in the CM OC kernel I was able to 1601 on the little..
Edit 2: Set the GPU to max clocks and performance governor, score 35,868. If little clocks would hit 1601 instead of 1113, I'm betting it would pass 37,000.
Final Thoughts: I've had zero issues with performance in any capacity, and the MOTO Camera for v2 Lollipop works great. I think we've got a winner here. Not a big fan of the news thing when you swipe to the left though, hopefully an easy way to get rid of that... and apparently its pretty easy, just press and hold on homescreen, then hit the toggle on the mini version of the news screen, gone!
xStealth said:
Ok... so:
6045i
- Full Wipe
- Installed without kernel, then hit reboot
- Rebooted straight to TWRP, said OS not installed. Installed over it, rebooted.
- Booted up, went through settings, then froze when Supersu free dialog box popped up
- Installed Nuevoboot_Alcatel_V1, and open_gapps-arm64-5.0-micro-20151124
- Booted up fine, no play service issues of any kind
- Ran AnTuTu 64-bit with big/little on performance (1651 and 1113), score 33,625
Can't fathom why the 6045Y would score almost 3,500 more on AnTuTu. Made sure there was no thermal throttling by placing phone in front of air conditioner.
Edit: Seems the 6045Y can throttle the little up to 1601, whereas my 6045i maxes at 1113? I'd assume that is where the extra 3,500 in AnTuTu is coming from. Odd, in the CM OC kernel I was able to 1601 on the little..
Edit 2: Set the GPU to max clocks and performance governor, score 35,868. If little clocks would hit 1601 instead of 1113, I'm betting it would pass 37,000.
Final Thoughts: I've had zero issues with performance in any capacity, and the MOTO Camera for v2 Lollipop works great. I think we've got a winner here. Not a big fan of the news thing when you swipe to the left though, hopefully an easy way to get rid of that... and apparently its pretty easy, just press and hold on homescreen, then hit the toggle on the mini version of the news screen, gone!
Click to expand...
Click to collapse
Most folks could choose 1601 but their phone was rarely actually at that speed...people experiencing reboots should check their cpu temp in KA...in every case I encountered a reboot checking it right after boot showed it was still quite high and more than likely the cause of the reboot. You should however be able to set it to 1300 without issues.
I wouldn't use performance or interactive as they had all 4 cores going way to much of the time allowing temps to rise.....try "wheatley".
Hello,
I would like to begin porting NetHunter to the M9 so far I've built CM13.0 and added the http://patches.aircrack-ng.org/mac80211.compat08082009.wl_frag+ack_v1.patch to the Kernel.
I've asked x_Pelya_x to update the kernel HID patch for the 3.10 kernel which he has agreed to do.
So my question after applying these patches what would be the next step to implementing a full build rather just a kernel, I've had a look at Nethunter porting & porting to the M8 but nothing for the M9 Marshmallow.
Hi
BioT3rm said:
Hello,
I would like to begin porting NetHunter to the M9 so far I've built CM13.0 and added the http://patches.aircrack-ng.org/mac80211.compat08082009.wl_frag+ack_v1.patch to the Kernel.
I've asked x_Pelya_x to update the kernel HID patch for the 3.10 kernel which he has agreed to do.
So my question after applying these patches what would be the next step to implementing a full build rather just a kernel, I've had a look at Nethunter porting & porting to the M8 but nothing for the M9 Marshmallow.
Click to expand...
Click to collapse
Did you managed to do it? I tried to compile the kernel for nougat but I got a error for btusb.c (If you want to see the error, check my profile).
WELCOME
Miustone is Presenting
The XperiStock ROM. Based on the latest Xperia Firmwares. Optimized with Love.
The XperiStock ROM Contains 8 Years of research and testing on Android. Aiming on a open and Pixel like Expierence, is the XperiStock ROM coming with the barely minimum of Apps. Including Google App replacements without loosing the best Features of the Xperia Firmwares. Optimized on many Edges under the Hood, but still delivering the default Stock Feel and Look of the Original Firmwares. If You want to know what's included, check out the Features List..
FEATURES
Rooted by Magisk
Busybox included
DRM Fix included
Fully De-Odexed
Heavily Debloated
Google App Replacements
DM-Verity disabled
Forced Encryption disabled
SafetyNet Passing
All default Stock Features
Optimized booting Times
Optimized Performance
Optimized UI Handling
Optimized Audio Handling
Pixel Exclusive Features
Credits to:
-sToRm// (DRM FIX)
-shoey63 (DRM FIX)
-SuperR. (KITCHEN)
XDA:DevDB Information
XperiStock ROM, ROM for the Sony Xperia XZ Premium
Contributors
Miustone, Miustone, Miustone, Shoey63
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
Based On: .145 Custom DE (G8414)
Version Information
Status: Testing
Current Stable Version: V1848
Stable Release Date: 2018-04-08
Created 2018-04-07
Last Updated 2018-04-08
Infos:
Instructions
-(Coming from AOSP or older Firmwares)
-Flash the latest Official Firmware for Your Device
-Boot into the System (Setup Wizard)
-Flash TWRP with Fastboot
-(Coming from latest Stock Firmwares)
-Full Wipe (Data, System and Caches)
-Flash XperiStock ROM
-(G8142 Users have to replace the Kernel)
Changelog
V1
-Based on 47.1.A.12.145
-Deodexed
-DM-Verity Disabled
-Forced Encryption Disabled
-Zipaligned
-Signed
V1848
-Changed Installer UI Print
-Changed Version Naming (Dates)
-Changed default DPI to 400 (From 480)
-Optimized ROM Installer Script
-Optimized ROM Installer Directions
-Added first Optimizations from the Snappatch
-Removed Third Party Bloat Apps
-Removed many SONY Apps
-Removed Stock Google Apps
-Added Optimized Super GApps Pack
-Added Android for Work Support
-Added First Optimizations (W.i.P.)
-Added Magisk Root
-Added Rootless Pixel Launcher
-Added "DRM Fix"
-Added Shoey63's Kernel (Thank him)
-Reduced ROM Size by ~500Mb
-Removed Bootanimation
-Disabled Bootanimation Preloading
-Disabled Bootanimation
-Added Busybox
-Added Pixel Features (First Set)
-Added Freeform Windows (Recents)
V18410 (Soon)
-Merged more Snappatch Content
-Added more Pixel Features
-Added new Xperia Assistentin
-Added new Xperia Camera App
-Added better Microphone Handling
-Added Security Handling Optimizations
-Added Audio Handling Optimizations (Output)
-Added Rendering Handling Optimizations
-Added better Camera Image Quality Profiles
-Added better Camera Audio Quality Profiles
More coming soon...
Download:
GOOGLE DRIVE
Missing Apps?
Check the Play Store for Your Favorite Apps or visit apkmirror.com
Hello Folks! Looking forward to support My new XZ Premium with great Work! Stock has changed over the Years and there is a lot to learn again. So please let Me know if You have something to contribute like a Camera /DRM FIx or something like Support for more Variants of one Phone Model...
Hope You will enjoy what i deliver! Happy flashing :highfive:
wow great job! cant wait to try it out
madshark2009 said:
wow great job! cant wait to try it out
Click to expand...
Click to collapse
Added a Changelog If You prefer to have something special should You just wait for V2. V1 is very basically to proof that i'm able to produce working Bases for My Work. Looks like i stop doing My Snappatch and switch back to Stock ROM Creations again. To bad that AROMA isn't working on the XZ Premium, otherwise would i include Tons of Options...
Maybe can we get that also fixed in the Future. First Things first
Miustone said:
Added a Changelog If You prefer to have something special should You just wait for V2. V1 is very basically to proof that i'm able to produce working Bases for My Work. Looks like i stop doing My Snappatch and switch back to Stock ROM Creations again. To bad that AROMA isn't working on the XZ Premium, otherwise would i include Tons of Options...
Maybe can we get that also fixed in the Future. First Things first
Click to expand...
Click to collapse
I like how you work! Very orginized and promising
So camera is not working at all? Not even on alternative apps?
madshark2009 said:
I like how you work! Very orginized and promising
So camera is not working at all? Not even on alternative apps?
Click to expand...
Click to collapse
Glad to hear that You appreciate that! Hope i can provide a clean and good Working ROM over the next Years, with Useful additions and Optimizations. Something You will never see from Me are old, obsolete or non working "Tweaks", copied Audio Mods or included Xposed. That's stuff Users can add if they Think they miss it...
Quality over Quantity!
And to answer Your Question: No, it's not working at all. You can open it and all that but taking Pictures outputs Green Results (Think the Noise Reductions has a mailfunction without DRM)
XperiFix would be the Way to get around this, but it doesn't allow or support newer Firmwares (As long as the Master isn't giving it Free). I will try to find a Fix for this without the need for a PC, but for now do we have to wait or to use the following Way)
You can:
-Flash XperiFix supported Firmware to Your Device
-Boot into the System (Skip the Setup)
-Shutdown
-Flash the XperiStock ROM (Don't boot the System)
-Use XperiFix
And that should be it. Can't say if this really works but i heard it does...
I go to home sooner and test your rom it's stock yeah just flash able I'm fix camera by flashing that old kernel and drm fix so easy but I think the stock kernel is super fast and this is just fast(old kernel).
Blackghosthm said:
I go to home sooner and test your rom it's stock yeah just flash able I'm fix camera by flashing that old kernel and drm fix so easy but I think the stock kernel is super fast and this is just fast(old kernel).
Click to expand...
Click to collapse
Wow, thank You for letting Us know! We know it's a old Kernel, but better as a non working Camera for now! BTW. Is the Kernel for the Dual SIM Version only or also for the G8414 Version!?
EDIT1: Next ROM comes soon! Changelog grows :angel:
EDIT2: Testing some last Changes. Think i'll upload the next ROM Version very soon...
Maybe you could have a look at getting this working on oreo for v2. Used to work fine on nougat. The font tab is added to settings, but hangs then reboots when you press it.
https://forum.xda-developers.com/crossdevice-dev/sony/root-font-selector-igor-eisberg-t3367521/page1
Miustone said:
Wow, thank You for letting Us know! We know it's a old Kernel, but better as a non working Camera for now! BTW. Is the Kernel for the Dual SIM Version only or also for the G8414 Version!?
EDIT1: Next ROM comes soon! Changelog grows :angel:
EDIT2: Testing some last Changes. Think i'll upload the next ROM Version very soon...
Click to expand...
Click to collapse
does the xposed working?
---------- Post added at 03:15 AM ---------- Previous post was at 03:14 AM ----------
does the xposed working? AndroPlus Kernel V11 Cause WiFi and data settings to be invalid,as my test on g8142.
oneheart said:
does the xposed working?
---------- Post added at 03:15 AM ---------- Previous post was at 03:14 AM ----------
does the xposed working?
Click to expand...
Click to collapse
Xposed isnt working, since the last two Sony updates.
---------- Post added at 12:35 PM ---------- Previous post was at 12:21 PM ----------
@Miustone
Here is a patched services.jar from .145 firmware, using the method from here.
https://forum.xda-developers.com/showpost.php?p=68001053&postcount=2
Beetle84 said:
Maybe you could have a look at getting this working on oreo for v2. Used to work fine on nougat. The font tab is added to settings, but hangs then reboots when you press it.
https://forum.xda-developers.com/crossdevice-dev/sony/root-font-selector-igor-eisberg-t3367521/page1
Click to expand...
Click to collapse
Interesting, i will take a look! Thanks for sharing!
oneheart said:
does the xposed working?
---------- Post added at 03:15 AM ---------- Previous post was at 03:14 AM ----------
does the xposed working? AndroPlus Kernel V11 Cause WiFi and data settings to be invalid,as my test on g8142.
Click to expand...
Click to collapse
I'm not sure if i go with AndroPlus Kernel on the Release since someone told Me he is working on a new Kernel including the DRM Fix. At least is My Camera working with this Kernel (G8414) besided no other Bugs (Except for Lags after flashing but that is gone now). Hope i can deliver a ROM that works also for Your Device well...
Beetle84 said:
Xposed isnt working, since the last two Sony updates.
---------- Post added at 12:35 PM ---------- Previous post was at 12:21 PM ----------
@Miustone
Here is a patched services.jar from .145 firmware, using the method from here.
https://forum.xda-developers.com/showpost.php?p=68001053&postcount=2
Click to expand...
Click to collapse
Thanks for Your efforts! I'm not going to include Xposed by default since not everyone is using it (Including Me), but i could include Your Edited Services.jar for Xposed Users if it helps!?
EDIT: Is the Services Jar comming with disabled Signature Verification? If so, should it be easy to include the Font Selector from the Link up here...
I'm currently almost done with the new Version. Just waiting for the Kernel and i'm about to Optimize the Camera Config (Trying to enable 4K Recording on the Front Cam besides 1080p @60fps and such). Maybe do i find some more Things to play with...
I'm also thinking the Audio Quality could be better at all. I will also work on this without using any Pseudo Audio Mods or such...
Can't wait to upload the next ROM. I was also thinking about another Name (XperiStock was a just quick Idea for the Release). How Sounds PiXeria? Think it would fit well to the Pixel Look the next ROM comes with... Let Me know!
BR
Miustone said:
Interesting, i will take a look! Thanks for sharing!
I'm not sure if i go with AndroPlus Kernel on the Release since someone told Me he is working on a new Kernel including the DRM Fix. At least is My Camera working with this Kernel (G8414) besided no other Bugs (Except for Lags after flashing but that is gone now). Hope i can deliver a ROM that works also for Your Device well...
Thanks for Your efforts! I'm not going to include Xposed by default since not everyone is using it (Including Me), but i could include Your Edited Services.jar for Xposed Users if it helps!?
I'm currently almost done with the new Version. Just waiting for the Kernel and i'm about to Optimize the Camera Config (Trying to enable 4K Recording on the Front Cam besides 1080p @60fps and such). Maybe do i find some more Things to play with...
I'm also thinking the Audio Quality could be better at all. I will also work on this without using any Pseudo Audio Mods or such...
Can't wait to upload the next ROM. I was also thinking about another Name (XperiStock was a just quick Idea for the Release). How Sounds PiXeria? Think it would fit well to the Pixel Look the next ROM comes with... Let Me know!
BR
Click to expand...
Click to collapse
hey can you also see if you can enable native 4k screen? or 120hz? or recording [email protected]?
PiXeria sounds nice , you can try XpiXel, or any unrelated name that sounds strong, like venum or cobra or viper like some other rom names
but PiXeria sounds nice too.
@Miustone
I notice you are directing users to use one of my old kernel repacks with this rom, and that's fine but it's time for an an update!
Here is my repack of the latest .145 stock kernel for G8141 single sim https://www.androidfilehost.com/?fid=890129502657596596
I assume you have baked the drm fix libs into the rom, but if not , here is sToRm//'s drm fix zip https://www.androidfilehost.com/?fid=673956719939833470 (zips tested by me and verified as working on pure stock 47.1.A.12.145 rom)
- Camera with no green pictures working straight out of the box.
- Safetynet passes without flashing Magisk.
- DMverity disabled.
- Patched to eliminate lag on deodexed roms. (Works fine on odexed as well)
- Flash kernel.zip and drmfix.zip in TWRP recovery and you are done.
madshark2009 said:
hey can you also see if you can enable native 4k screen? or 120hz? or recording [email protected]?
PiXeria sounds nice , you can try XpiXel, or any unrelated name that sounds strong, like venum or cobra or viper like some other rom names
but PiXeria sounds nice too.
Click to expand...
Click to collapse
Great Ideas! XperiStock sounds so copied for Me
I will think about it till the Third Release. Well, native 4K shouldn't be the Problem, but 120Hz for sure. Maybe can we do more on Stock when the 120Hz Option on AOSP finally works (To see how it works). 4K on 60FPS with Back Cam on Stock is in the testing Phase right now...
Let's see what i can manage to do in the next Time, but i'm already really satisfied with the Quality of Stock. It's for sure beyond the most Flagship when it comes to Quality and Features...
Only the Audio could be really better like said before. Think i can make this baby a lot better in this view. There is a lot to merge from My Snappatch, and i'm finally not longer handicapped by the DAC in My Axon 7 (Snapdragon ftw!)
Hi Miu stone I'm glad to see you working on camera and audio (specially camera because no one does) just don't delete xreality, I think native 4k can be good, but native 2k can be great because dialer doesn't work on 4k, phone goes hot on 4k,battery drain faster, and phone getting slow on games.
Hope you adding cool features to it and thanks for great work.
How's xperibeast for name. ?
Blackghosthm said:
Hi Miu stone I'm glad to see you working on camera and audio (specially camera because no one does) just don't delete xreality, I think native 4k can be good, but native 2k can be great because dialer doesn't work on 4k, phone goes hot on 4k,battery drain faster, and phone getting slow on games.
Hope you adding cool features to it and thanks for great work.
How's xperibeast for name.
Click to expand...
Click to collapse
well at least there should be the option of switching you know? when you gaming you can simply switch to 1080 or 2k and when you just browsing, instagram, youtube , chrome, etc its nice to have 4k as an option to enable, plus there is an alternative phone app that works with 4k (the reason it doesnt work in the first place is because some apps arent adjusting to the VIRTUAL density but if it was physical it wouldnt cause such problems) I tried it and it works perfectly, and dont worry, i dont think native 4k is as much power requiring as virtual so overheating isnt gonna be a big issue like on virtual 4k using adb commands.
Miustone said:
Great Ideas! XperiStock sounds so copied for Me
I will think about it till the Third Release. Well, native 4K shouldn't be the Problem, but 120Hz for sure. Maybe can we do more on Stock when the 120Hz Option on AOSP finally works (To see how it works). 4K on 60FPS with Back Cam on Stock is in the testing Phase right now...
Let's see what i can manage to do in the next Time, but i'm already really satisfied with the Quality of Stock. It's for sure beyond the most Flagship when it comes to Quality and Features...
Only the Audio could be really better like said before. Think i can make this baby a lot better in this view. There is a lot to merge from My Snappatch, and i'm finally not longer handicapped by the DAC in My Axon 7 (Snapdragon ftw!)
Click to expand...
Click to collapse
hope the [email protected] work, and if 120hz is a problem how about 4k option? is it possible you might consider it in the next version?
and yah actually the sound quality on the device is superb and on a high level compared to other devices when it comes to everything about sound engineering, I actually work in the music field and I work a lot with sound stuff and i can tell you it delivers pretty good accuracy and has a high dynamic range of frequencies and its very rich, the only issue here is that its very low, could be to maintain really good quality sound, but I would rather a higher volume even if it means a little less quality (unless if it starts to distort in that case id rather keep it low)
and again, on be half of the XZP community I cant thank you enough for you efforts and energy to get this baby up and running on the level it should be
keep it bro much love
shoey63 said:
@Miustone
I notice you are directing users to use one of my old kernel repacks with this rom, and that's fine but it's time for an an update!
Here is my repack of the latest .145 stock kernel for G8141 single sim https://www.androidfilehost.com/?fid=890129502657596596
I assume you have baked the drm fix libs into the rom, but if not , here is sToRm//'s drm fix zip https://www.androidfilehost.com/?fid=673956719939833470 (zips tested by me and verified as working on pure stock 47.1.A.12.145 rom)
- Camera with no green pictures working straight out of the box.
- Safetynet passes without flashing Magisk.
- DMverity disabled.
- Patched to eliminate lag on deodexed roms. (Works fine on odexed as well)
- Flash kernel.zip and drmfix.zip in TWRP recovery and you are done.
Click to expand...
Click to collapse
True Hero! Thank You very much for Your Contribution! I just got the DRM working with My ROM and the right Kernel, but it's really Time for a Update. Next Version of My ROM will come with Your Kernel! Also great to hear that there will be no Lags and to have also other Additions like DMverity disabled besided passing SafetyNet!
I could with AROMA create a lil Pack containing the DRM Fix, Magisk (Or no Magisk) and Your Kernel, but sadly is our TWRP buggy and doesn't works with AROMA right now. But when People want to flash My ROM with a working Camera and without Magisk do they just have to remove the Magisk ZIP out of the ROM and all will be fine. Really great!
Buy this Man a Beer! Next ROM Update will come in the next Hours with new Kernel <3