Develop Bugs

[17 DEC][ROM] DHD Dungphp 1.6 - Tweakers by Vis [Tweaks+ZRAM+Swap+Data2SD] DMKern2.8

ROM Base by Dungphp RUU Desire HD 3.06.405.1, 3.12.405.1 - With sense 3.0 - Android 2.3.5 Tweakers Edition by Visentinel With STABLE DATA2SD by Sibere
****Pay attention to the install procedure****
Reason for ROM
All tweaked out, and virtually unlimited space thanks to siberes DATA2SD made for Desire roms. ZRAM by Dorimanx and Kernel 2.8 by Dorimanx. Dungphp's sense 3 rom is the best sense rom in town and then i came along and made it even better
Tweaks Feature List
Tweaked IO
- NOOP IO Scheduler set to defualt
- 512 IO Cache
-You can change the above with system tuner set at boot with init.d
Tweaked Ram Management
- Latest Legendary Dorimanx's ZRAM Script
- Automatically mounts mmcblk0p3 for sd-based swap
Stripped Sense 3, just the awesome Sense UI
- Sense 3 Stripped of all useless HTC stock apps + libs (Basically Everything)
- Stripped all downloadable GAPPS
- Launcher Pro is Default, There is no Rosie (Doesn't work after stripping HTC Apps) Install any launcher you prefer
All of Dungphp's rom features...
Working:
- Phone, Sound, Camera, Camcorder, GPS, Data, Wifi, bluetooth ...
- Mount, USB Disk, Gallery, 720p videos, Flash with video, sound streaming ...
Bugs:
- Graphical Glitches - Dont try to fix it, aint as bad as anyone thinks... you can live with it ! - or try and flash a .35 kernel, but performance goes down... is it worth it ?
- Sense Customization settings closes without launching the customization app
INSTALL PROCEDURE
MAGLDR partition sizes - Use Last 24mb NAND - 5/330/10
Install the rom as normal with CWM
Reboot and wait for the rom to finish first boot and complete the HTC wizard, wait a couple of minutes at the launcherpro desktop, you may config wifi and some settings but DO NOT add any accounts to accounts and sync.
Reboot
Flash the Data2SD in CWM
Reboot
Install Superuser from the market
I had to strip "everything" I could to get this rom to boot with enough NAND data space to function before rebooting again to install data2sd. I had 22mb data space left on my first boot.
Enjoy
Download - You Need Both
Download the Rom
Download the Data2SD
Screenshots
Attached to thread.

Introducing the...
FutureLog
17 - dec
Fix the "Customize" in settings. One of the HTC Apps was responsible for that
Maybe a Sense 3.5 release but there isn't much difference between 3 and 3.5 for the purposes of this ROM, also I could not shrink a sense 3.5 rom enough for first boot so..
A. I need time to experiment with more stripping ideas
B. Learn how to integrate Siberes Data2SD
C. Figure out why removing the A2SD+ from the sense 3.5 runny roms released here completely breaks them.
ChangleLog
Future 1.2 - Released as CWM update to 1.1
Better Zram Settings - Attached to this post is an updated 02zram. Flash in CWM.
New 2.9 kernel by dorimanx attached - fixes a bluetooth bug.
1.1
First released version
update kernel to dorimanxs 2.8
update zram to new version
1.0
First Version - tested for 48 hours

Benchmark
Avg NAND Speed = 27200.392 KB/s<=> 26.563 MB/s
Test file in /data/data wich is on sdext by data2sd.
I/O Schedulers and devices Tester by iamcxa

seems a great rom be cooked!
kill the rosie.apk and take out the htc screen is a good idea to make the speed up for performance , i did that for my test build ... it's fast and faster.

iamcxa said:
seems a great rom be cooked!
kill the rosie.apk and take out the htc screen is a good idea to make the speed up for performance , i did that for my test build ... it's fast and faster.
Click to expand...
Click to collapse
Thanks Mate i was nervous about what the first person was going to say you give me a smile.

Visentinel said:
Thanks Mate i was nervous about what the first person was going to say you give me a smile.
Click to expand...
Click to collapse
when i opened the thread i also nervous and especially
that is my first thread.
but be relaxed, i think this will be a stable and cool rom!

tank's bro,downloading now

Cool, you would be the first person other than me to use this rom
let me know how it goes asap, i want to be sure 330m system works, 315 worked for me but as you can see i have under 5mb left.
After you flash go to advanced and report errors, mount sdcard and check the cwm log and make sure all the minzips worked, to ensure you didint run out of system partition space.
And remember to enable use last 24 nand in magldr under services.

Graphic glitches...You're wrong. I can't live with that.
Sent from my HTC HD2 using Tapatalk

mzebrowski13 said:
Graphic glitches...You're wrong. I can't live with that.
Sent from my HTC HD2 using Tapatalk
Click to expand...
Click to collapse
Lol your loss.
Sent from my Desire HD using Tapatalk

Visentinel said:
Lol your loss.
Sent from my Desire HD using Tapatalk
Click to expand...
Click to collapse
well ,take out glitches but lose performance ... okay that's depending on users.

Visentinel said:
Lol your loss.
Sent from my Desire HD using Tapatalk
Click to expand...
Click to collapse
Well now you're right ... V

iamcxa said:
well ,take out glitches but lose performance ... okay that's depending on users.
Click to expand...
Click to collapse
The glitches are barely noticeable ! Don't u agree ?
Sent from my Desire HD using Tapatalk

Visentinel said:
The glitches are barely noticeable ! Don't u agree ?
Sent from my Desire HD using Tapatalk
Click to expand...
Click to collapse
yes but seems get problem in buffer, did you noticed this? if the animation is shorter then glitches doesn't display.
see: http://forum.xda-developers.com/showthread.php?t=1386684

iamcxa said:
yes but seems get problem in buffer, did you noticed this? if the animation is shorter then glitches doesn't display.
see: http://forum.xda-developers.com/showthread.php?t=1386684
Click to expand...
Click to collapse
So your thinking this could be fixed in a .32 kernel if someone could figure out why the .35 kernel fixes it by finding the missing part ?
I am simply hoping soon Dorimanx might dev a .35 kernel with his performance modifications, I think he just needs time.
Just an update on this rom, the latest zram script by Dorimanx is clashing with this roms oom settings, I am going to work on tweaking it. I will post an updated zram script for this ROM once I am satisfied with the settings.
-Update
2nd post has CWM flash zip with a better zram script.
Dorimanx Kernel 2.8 had a Bluetooth Bug, attached to 2nd post is updated 2.9 kernel.

can't test now, but thanks anyway for a new sense work for Hd2!
I suggest to update kernel to 2.9 in order to fix bt bug
I will test this rom next week

Visentinel said:
So your thinking this could be fixed in a .32 kernel if someone could figure out why the .35 kernel fixes it by finding the missing part ?
I am simply hoping soon Dorimanx might dev a .35 kernel with his performance modifications, I think he just needs time.
Just an update on this rom, the latest zram script by Dorimanx is clashing with this roms oom settings, I am going to work on tweaking it. I will post an updated zram script for this ROM once I am satisfied with the settings.
-Update
2nd post has CWM flash zip with a better zram script.
Dorimanx Kernel 2.8 had a Bluetooth Bug, attached to 2nd post is updated 2.9 kernel.
Click to expand...
Click to collapse
yes, that is what i want to say, I think that should has possible be fix. but if someday DM decide to coding .35 ... well, I thought we put it away temporary and try our best for cooking rom first, and if possible then we could try to fix and coding kernel together. because kernel builder not to many but have lot of chefs, so i thought maybe we should join to kernel part to find out the bugs.

iamcxa said:
yes, that is what i want to say, I think that should has possible be fix. but if someday DM decide to coding .35 ... well, I thought we put it away temporary and try our best for cooking rom first, and if possible then we could try to fix and coding kernel together. because kernel builder not to many but have lot of chefs, so i thought maybe we should join to kernel part to find out the bugs.
Click to expand...
Click to collapse
It's a good idea but atleast for me I know nothing of kernels, I can't even figure out how to compile a kernel lol, I have tried.
I will ask dorimanx if he is willing to assist in this tho, I will offer him my full support to test.
Sent from my Desire HD using Tapatalk

If anyone has any sod issues just let me know il make an update to stop loading sd based swap. Usually sd swap is the reason for it.
Posted from my tweaked DHD.

[KERNEL][I9000B] Semaphore JB 3.0 (I9000-B only)

This is stratosk's Semaphore JB kernel compiled for the GT-I9000B (Latin america variant of the I9000). Stratosk doesn't support this variant, so cronot tweaked the build to make this excellent kernel work for the I9000B variant. He now moved on to another phone so he has stopped working on this build, but not before handing it over to me - so I will now be building this kernel, at least for as long as stratosk does
With that said, here comes the disclaimer: By flashing this kernel, you accept that it comes without any support, neither mine and even less so from stratosk, since he doesn't support this variant on his own releases. So please don't bother him with support questions regarding this specific build. IOW: you'll use this kernel at your own risk.
There were reports of data loss during testing on early builds of the 2.8.x (kernel for Android 4.2) series - there were no more bad reports on later versions, but this needs to be said: Always do a nandroid backup before installing or updating any of the kernels posted here. I won't be held responsible if you lose data while using these kernels!
I *may* be able to help depending on whatever problems you might have, but don't expect timely answers, or any answers at all if I'm not technically able to figure out your problem - I'm a beginner on kernel development, all I did with this really was just some slight tunings and then recompile it for the I9000B. Also, I'm doing this on my free time, which is not much these days, so for now I'm just going to focus on following stratosk builds and recompile them for the I9000B as they come. I can say though, as far as problems, I don't have any with it on my device - it works fine and fast for me.
Now, on to the goodness:
This kernel is exactly the same as stratosk builds (hence, the exact same features and changelogs, including compiler versions and configuration), but with the following modifications:
Swap enabled;
ZRAM enabled as module (To configure it (on CM10), go into Settings / Performance / Memory Management);
KSM support enabled (Disabled on system by default, to enable it (on CM10), go into Settings / Performance / Memory Management)
Note about build version 2.7.0
Stratosk is no longer maintaining the 2.6.x builds that are meant for Android 4.1. But cronot was using Android 4.1 before he sold his SGS, and looking at some of the latest 2.9.0 features he felt like having some of its features on the 2.6.x builds, and so he did it. Since there are quite some important changes he thought it would be better to bump the version number to 2.7.0. Do note though that I provide this kernel here only as a convenience, I won't be supporting this version because I'll be compiling, testing and using only the kernels for Android 4.2, like stratosk does.
The 2.7.0 build contains the following cherry-picks from 2.9.0:
Reduce number of frame buffers for more RAM (on my ex-SGS I'm now at 383Mb, up from 377Mb);
Updated Interactive governor;
ROW I/O Scheduler
Known issues
None, as far as I know - feedback is always welcome!
What works
Everything, as far as I could see.
Usage
Just flash it on CWM like any other kernel. Normal version and 's' version are provided just like on stratosk's release. Use the Semaphore Manager app on Google Play, from stratosk, to setup the kernel features.
All instructions and documentation from stratosk's original Semaphore kernel applies to this one, so look into his own thread for more information.
Source
Github repository
Thanks
To stratosk, of course, for his awesome work on his kernel, and for letting me post this here for I9000-B users;
Everyone who is/was involved on the development of the Semaphore kernel - basically, anyone on stratosk's "thanks" list
Downloads:
Until version 2.9.12 here:
http://code.google.com/p/lu4ndr01d/downloads/list
Version 2.9.13 forth herein: http://code.google.com/p/luandroid/downloads/list
Version 2.9.18 forth herein: http://goo.im/devs/LU4NDR01D/Kernel/Semaphore
LInk my site: www.luandroid.com.br

To download previous versions follow the link my friend cronot.
http://forum.xda-developers.com/showthread.php?t=2011376

Re: [KERNEL][I9000B] Semaphore JB 2.9.7 (I9000-B only)
Version 2.9.8 on line.
Enviado do meu GT-I9000B usando o Tapatalk

Personnel who are having problems with BLN, just install this app and activate BLN will work.

Thank you so much ! I want to try Semaphore but never work on my I9000B
PS: With Bigmem I can't record on 720p but I've read that it's fixed, I'm wrong ?

Gezetah said:
Thank you so much ! I want to try Semaphore but never work on my I9000B
PS: With Bigmem I can't record on 720p but I've read that it's fixed, I'm wrong ?
Click to expand...
Click to collapse
Yes it can not, it is not not fixed, download the "SB", it does not contain the bigmen.

rubervalrfl said:
Yes it can not, it is not not fixed, download the "SB", it does not contain the bigmen.
Click to expand...
Click to collapse
Thats what I've downloaded "Semaphore_JB_2.9.8sb.zip" and I can't record. Do you mean Semaphore_JB_2.9.8b.zip ?

Gezetah said:
Thats what I've downloaded "Semaphore_JB_2.9.8sb.zip" and I can't record. Do you mean Semaphore_JB_2.9.8b.zip ?
Click to expand...
Click to collapse
I did not, which one you downloaded? must be the SB.

rubervalrfl said:
I did not, which one you downloaded? must be the SB.
Click to expand...
Click to collapse
I've downloaded the SB one, but I can't use the camcorder :/

Gezetah said:
I've downloaded the SB one, but I can't use the camcorder :/
Click to expand...
Click to collapse
Dude, you want me to post something you see, because this working perfectly, which rom you are using?

rubervalrfl said:
Dude, you want me to post something you see, because this working perfectly, which rom you are using?
Click to expand...
Click to collapse
Sorry, I don't want to bother you, each phone is different.
By the way I'm using CM10.1 (20130124), I'll try again.
EDIT: I saw this on the Semaphore thread...
Please note that there are 2 variations:
Normal versions: for CM10 or ROMs without hugemem configuration, available RAM 384MB - 396MB
's' versions: for Slim Bean ROM or patched ROMs with hugemem configuration, available RAM 397MB - 409MB
So, I'm using the normal version and everything works fine
PS: can I use the default CM10.1 performance menu or this kernel uses the Semaphore manager only ?

Gezetah said:
Sorry, I don't want to bother you, each phone is different.
By the way I'm using CM10.1 (20130124), I'll try again.
EDIT: I saw this on the Semaphore thread...
Please note that there are 2 variations:
Normal versions: for CM10 or ROMs without hugemem configuration, available RAM 384MB - 396MB
's' versions: for Slim Bean ROM or patched ROMs with hugemem configuration, available RAM 397MB - 409MB
So, I'm using the normal version and everything works fine
PS: can I use the default CM10.1 performance menu or this kernel uses the Semaphore manager only ?
Click to expand...
Click to collapse
Yes you can, I am currently in SlimRom compiled by myself, so I said this all working.

Tried 2.9.8b, everything works good but I get an error everytime I try to flash a rom that does not have Semaphore 2.9.8b.

Zkaar said:
Tried 2.9.8b, everything works good but I get an error everytime I try to flash a rom that does not have Semaphore 2.9.8b.
Click to expand...
Click to collapse
What is the error?

Hello, I would like to know if I can use this kernel in a normal GT-I9000, the international version, because I'm interested in ZRAM and KSM.
What is the special compilation for the B version?

Re: [KERNEL][I9000B] Semaphore JB 2.9.8 (I9000-B only)
eTomm said:
Hello, I would like to know if I can use this kernel in a normal GT-I9000, the international version, because I'm interested in ZRAM and KSM.
What is the special compilation for the B version?
Click to expand...
Click to collapse
If you use the normal kernel on the I9000B the touchscreen doesn't work, but it has the same features, you can download the I9000 kernel from the official site.
Enviado desde mi GT-I9000B

eTomm said:
Hello, I would like to know if I can use this kernel in a normal GT-I9000, the international version, because I'm interested in ZRAM and KSM.
What is the special compilation for the B version?
Click to expand...
Click to collapse
As our friend said above, this compilation is for Latin version of the device, sold in Brazil, Argentina and some other countries in South america

rubervalrfl said:
What is the error?
Click to expand...
Click to collapse
It is a generic error, like "get build.prop failed". I always get that when trying to flash a I9000 ROM or a corrupt archive.
I can't really type the error now, it is big, and I've rolled back to 2.9.7b

Zkaar said:
It is a generic error, like "get build.prop failed". I always get that when trying to flash a I9000 ROM or a corrupt archive.
I can't really type the error now, it is big, and I've rolled back to 2.9.7b
Click to expand...
Click to collapse
Dude, I'm not getting this error your understanding, your device is "I9000B" or "I9000", where "B", please send the logcat because the way that, I can not help you.
Another thing, as you have seen deterioration, also'm Brazilian, please make me a visit at my site and describe in Portuguese unclear what his mistake, ok.

Zkaar said:
It is a generic error, like "get build.prop failed". I always get that when trying to flash a I9000 ROM or a corrupt archive.
I can't really type the error now, it is big, and I've rolled back to 2.9.7b
Click to expand...
Click to collapse
I have the same error when using CMUpdate, the phone restarts after download the rom and it gives me an error.

[TW][5.0.1][AndromedaKernel][SM-N910F][Abandoned]

Andromeda Kernel
Supported: SM-N910F & SM-N910V
Do not try to flash this on ANY other variant than the N910F (Snapdragon, European)! It might work, but it can fail and end in a bootloop! Testers for SM-N910G wanted!
Disclaimer
Your warranty is now void.
We are not responsible if your phone will be damaged, broken, bootlooping or detonating in a thermonuclear reaction.
YOU are choosing to make these modifications and accept the fact that something might go wrong.
Click to expand...
Click to collapse
About me and Andromeda / Philosophy
Andromeda Kernel was created by a madman who tries to combine raw power, stability and batterylife in his high-tech laboratory home. IÄm not doing compromises and will always listen to every feedback and feature request!
Click to expand...
Click to collapse
Index
OP Post: About the kernel, basic changelog, Download, Credits
Post 2 : Changelog Preview + Development Status, FAQ
Post 3 : Known Issues, Fixes and Updates about pending fixes
Post 4 : Reserved for future use (Better safe than sorry, right? )
Features:
# Based on Samsung OpenSource Kernel XXU1BOB4
# SeLinux Permissive
# Linux version 3.10.40
# Overclocking and Underclocking (268mhz - 3,07Ghz)
# Governors: Intelliactive, Bluactive (more to come...)
# Compiled with GCC Linaro 4.9.3 Cortex A15 (03.2015) [/CENTER]
Click to expand...
Click to collapse
Changelog
Andromeda Stable 2.1
- Overclock and Underclock (268mhz - 3,07Ghz)
- Kernel NEON mode implemented
- Added KCAL Color Control (v2)(Controllable from KControl or this app: http://downloads.codefi.re/savoca/kcal)
- IntelliPlug is disabled for now (Great change, I know lol)
- Brandnew IntelliThermal from faux *yay*
Andromeda Stable 1.0
- FauxSound 3.6 fully integrated
- IntelliPlug 4.0
- Enhancements and battery optimizations
- Renamed the Kernel in the settings, the last one was a disaster http://forum.xda-developers.com/for...xda-developers.com/images/smilies/biggrin.gif
- 57% Support with KControl currently (Playstore App)
Andromeda Milestone 1.0.0 (Public Release)
- Based on BOB4 Stock kernel
- Added Bluactive and Intelliactive governors
- SeLinux Permissive (Try viper4Android, it's great!)
- Compiled with Linaro 4.9.3 Cortex A15
Click to expand...
Click to collapse
Please check Post Nr.2 for the list of features to be included!
Downloads:
Important: Do NOT make mirrors please! If you want one, please request it. Unofficial mirrors found will be reported, please respect this.
http://d-h.st/tNu1 (Stable 2.1)
Click to expand...
Click to collapse
How to Install
You have to have a custom recovery like TWRP, Philz or CWM installed.
- Download the kernel
- Reboot to recovery
- A backup is always recommended
- Flash the zip file
- You're done! Reboot and enjoy.
Credits:
Pafcholini - If it weren't for you, we'd be stuck at compiling or somewhere else. Massive Thanks for helping, guiding and having incredible patience with my incompetence
Psycho_666 - For boldly flashing what no one had flashed before and for continued support. Try SimpleRom it's an awesome ROM. And there's a new version to be launched soon, with a specially built SimpleKernel, derived from Andromeda
*To be updated in the future*
Rsroms- For being the most fearless Tester there is on the world, thanks for the massive help!
XDA:DevDB Information
AndromedaKernel, Kernel for the Samsung Galaxy Note 4
Contributors
mythos234
Source Code:https://gitlab.com/mythos234/AndromedaN910F-LL/
Kernel Special Features:
Version Information
Status: Abandoned
Current Stable Version: Stable 2.1
Stable Release Date: 2015-03-30
Beta Release Date: 2015-03-17
Created 2015-03-17
Last Updated 2015-05-08

Changelog Preview / FAQ
Changelog Preview
To be included in next build (Andromeda_Stable_V1)
# Synapse Support (Use Trickstermod Pro or Kcontrol for now)
# IntelliPlug 4.0 (make it work finally.. Sorry for the screwup)
# Voltage Control
# Support for the N910T (T-Mobile Variant)
#
# Enhancements and battery optimizations
Click to expand...
Click to collapse
Feature requests are always welcome and highly encouraged! Just as reviews and feedback
Benchmarks:
Just how fast is this kernel? Well, this should answer it:
Frequently asked Questions (FAQ)
Or Questions and answers, since this thread is new.
Q: Can this be flashed on the Exynos Note 4?
A: No, by no means. The Exynos model is completely incompatible, sorry.
Q: And what about other Snapdragon versions?
A: I can't advise to do that, it's untested and might not work. If you know how to handle bootloops and can remove my kernel if it doesn't boot, then you can always try it and tell me how it went. More variants would be awesome.
Q: Yikes, this kernel is too close to stock! What about more features?
A: More features will be included, please check the changelog preview. You can also request features and track the progress. I will make a section on this thread to display the feature request and write if I look at them, make them or - and that might happen - reject them.
- To be updated..

Known Issues / Fixes
Bootloop if you have Viper4Android installed and flashed Andromeda over it
Fix: Uninstall Viper, install Andromeda and then reinstall.
If this issue persists in my future builds, then I'll add an automated script to remove Viper4Android upon installation of the kernel.

Welcome Aboard Mate Good luck Stefan.

G is on kk how to test it. Kernel mentioned as 5.0.1
Sent from my SM-N910F using XDA Free mobile app

bhasg1007 said:
G is on kk how to test it. Kernel mentioned as 5.0.1
Sent from my SM-N910F using XDA Free mobile app
Click to expand...
Click to collapse
Still on kk? Samsung is slower than I thought lol... Thanks for letting me know, edited the thread. Probably better to try it when G receives official 5.0

Seems like a great Kernel, good luck buddy

Going to test on my n910t after work. Ktoonsez is the only booting kernel so far for TW5.0 but we have a data issue

Welcome thanks for the work: Bueno:

Hey stefan, great work, can i use it with simplrom, although i am happy with nadia

Rsroms said:
Hey stefan, great work, can i use it with simplrom, although i am happy with nadia
Click to expand...
Click to collapse
Hi, yes of course you can! We are actually working on deeper and more exclusive support for SimpleRom too. Stay tuned for version 2.1, it will be awesome
My kernel is much closer to the stock base, so you might get some more performance squeezed out - especially if you select Intelliactive as your governor - but at the cost of battery. I'm still not so big on features, the last couple of days my compiler decided to give me a hard time :crying:
Only 910F for now though!

this kernel is the best one for note 4 it is soo fast
nadia kernel not good lag soo much

rowihel2012 said:
this kernel is the best one for note 4 it is soo fast
nadia kernel not good lag soo much
Click to expand...
Click to collapse
same devs in this kernel like nadia , hahahahaha nadia kernel lag , boy, you need to read more before posting

ManDone.vRs said:
same devs in this kernel like nadia , hahahahaha nadia kernel lag , boy, you need to read more before posting
Click to expand...
Click to collapse
I'm not part of their Team, but Pafcholini is teaching me Don't worry, this kernel is not a clone of Nadia. My newest and upcoming build is as fluent as the last one and the batterylife is holding up a ton better too. No compromises on either side, thats my motto!

mythos234 said:
I'm not part of their Team, but Pafcholini is teaching me Don't worry, this kernel is not a clone of Nadia. My newest and upcoming build is as fluent as the last one and the batterylife is holding up a ton better too. No compromises on either side, thats my motto!
Click to expand...
Click to collapse
yeah stefan i know , but when i see a reply from unknow users and said : x kernel got lag , y kernel so bad , hey ! wake up ! need to read more than 1 week to know about a custom kernel Cheers compi .

ManDone.vRs said:
yeah stefan i know , but when i see a reply from unknow users and said : x kernel got lag , y kernel so bad , hey ! wake up ! need to read more than 1 week to know about a custom kernel Cheers compi .
Click to expand...
Click to collapse
Haha, I know what you mean I love the compliment, but I know as well as you do, that Nadia doesn't lag, unless the Synapse settings are set wrong. Too bad that my attempts at Synapse aren't going so great atm..

Hi, this kernel is compatible with BOC3 version, of Lollipop netherland??? Thank u

xxxfirenzexxx said:
Hi, this kernel is compatible with BOC3 version, of Lollipop netherland??? Thank u
Click to expand...
Click to collapse
This kernel is compatible with F version

xxxfirenzexxx said:
Hi, this kernel is compatible with BOC3 version, of Lollipop netherland??? Thank u
Click to expand...
Click to collapse
Yes, it is. I don't know what changes Sammy made to the BOC3 kernel yet, so mine might be a bit slower than the BOC3 stock one. But it works with the version just fine

Andromeda Stable 1.0 released!
Good evening everyone,
it took me a while, but I present you the first Stable build of Andromeda!
Changelog
- FauxSound 3.6 fully integrated
- IntelliPlug 4.0
- Enhancements and battery optimizations (mainly centered around powersuspend and adaptations to the default interactive governor)
- Renamed the Kernel in the settings, the last one was a disaster
- 57% Support with KControl currently (Playstore App)
Click to expand...
Click to collapse
About the Overclocking and Synapse...
I originally intended to include both in this build, but it will still need much more time and work and I didn't want to keep you away from the great upgrades I made in this version, so those two goodies will come later. I can highly recommend trying TricksterMod and KControl, both from the PlayStore.
And a very special announcement...
Perhaps the biggest change is that I recently joined "Team Simple - Simply Awesome" cool and will contribute an adapted version of the Andromeda kernel to SimpleRom, starting with the very close release of it's 2.1 Build. We planned something special - FauxSound is only the cherry on the Audiophile package inbuilt, so be very excited for whats coming up and be sure to try SimpleRom, especially the upcoming 2.1 version!
Oh, btw. I will also open a thread for the SimpleKernel once the Rom is released, to provide an optimized yet very close to stock experience! And there are also plans for an Exynos Build (the N910C), but I need some help with the Exy, so if anyone could lend me a hand, it would be highly appreciated! Now I understand why most devs settle for the Snapdragon..
Link to SimplRom: http://forum.xda-developers.com/note-4/snapdragon-dev/rom-simplrom-v1-t3004628
Download for Andromeda Stable 1.0:
http://d-h.st/TBO4
Click to expand...
Click to collapse

[KERNEL][STOCK][LP][D802][UBERTC4.9][7.5.2015]BlueCyclonKernel2.2!!!

This is stock lp kernel for our d802 compiled from lge source 30d. The main future of this kernel is to provide near stock experience with fixes and few modifications, to stay light as possible.​
Futures:
Built with Linaro4.9 Toolchain by @Christopher83
Linux 3.4.0
Built using -O3 flags
Removed a lot of useless debugging and more to come
Exfat support thanks @faux123
Using pure stock 30d source with needed fixes to build
Light as possible
AutoPanel detection thanks @dr87
Bumped thanks @cybojenix
Install instructions:
You must be on stock LP rom with root and custom recovery installed and kitkat bootloader
Make a backup if something goes wrong so you can restore your device
Flash my kernel
Reboot your device and enjoy​
Bugs:
You tell me i will add everything​
Questions:
Feel free to ask anything related to my kernel here in thread I will answer you as fast as I can.​
Downloads:
BCKernel1.0
BCKernel1.1
BCKernel2.0
BCKernel2.1
BCKernel2.2
Disclaimer:
Your warranty is now void. By installing my kernel you take all responsibility to hardware,software bricks so its not my fault if you don't read and do stupid things.
I test every my release on my own device before the official release so there is no big chance to brick your device if you follow instructions.​
Thanks:
First of all HUGE thanks to my friend @duki994 for all the help great guy! without his help this would never be the same kernel.
@ferreirawax for his AWESOME guide!
HUGE thanks to @dorimanx for his fixes on the kernel source to build and boot properly and for everything else he is a kernel master.
@faux123
@bruce2728 for fixes
LGE for source​
PS:
This is my first official kernel release so please be kind and tell me if I done something wrong I have no intentions to make someone mad or break the forum rules so I would really like some help and advices from YOU guys.​
Source:
Kernel
Ramdisk
XDA:DevDB Information
BlueCyclonKernel, Kernel for the LG G2
Contributors
Boris31
Source Code: https://github.com/simex31/BC_Kernel_LP_STOCK_D802
Kernel Special Features:
Version Information
Status: Beta
Created 2015-04-17
Last Updated 2015-05-07

CHANGELOG:
18.4.2015 VERSION 1.1
Fixed exfat support
Merge some fixes from nexus5 caf
Selinux permissions fixes
Build using -o3 compiler flags
21.4.2015 VERSION 2.0
Exfat 1.2.4 from source
F2FS support thanks @neobuddy89
A lot of selinux fixes
A lot of new fixes from nexus5 caf
New custom build optimizations and flags
Optimization flags for GPU drivers
Added BFQ/SIO/FIOPS/ZEN/VR IO Schedulers and set CFQ as default
Set interactive governor as default
Deleted a lot of debugging and much more to come
Added Fsync enabled by default
Reduced minimum panel brightness for better reading at night
PM driver updates from Aurora 3.5
6.5.2015 VERSION 2.1
Compiled with UBERTC4.9
Added 3 new cpu governors INTELLIMM, INTELLIACTIVE, ALUCARD
Added GPU underclock and overclock to 650 max frequency.
A lot of gpu optimizations and new driver which should increase battery life and performances
Added MSM Hotplug which is enabled by default MPDecisions still run for other services but mp decision hotplug controls are disabled.
Full KCALv2 support by @savoca just download the app from here to use it.
Cpu optimizations which should increase battery life and performances
Added francisco fracno's light and clean Thermal driver and removed lg's
ZEN IO shed is set as default now
A lot of other patches from mainline kernel
Added Sweep2Sleep only enabled by default
Removed more useless debugging
Fixed potential memory leaks
And a lot more(check my git)
7.5.2015 VERSION 2.2
Bug fixes for gpu drivers
Bug fixes for gpu frequency now every freq works and sticks
Added voltage control be careful with uV not recommended more than -50
Rock stable

1 more

Thank good job

any support for fast charge?

Mastermind_hassan said:
any support for fast charge?
Click to expand...
Click to collapse
In plans for next release.

Any support for color control Mate?

Thank you , Can it use in ROM Port ?

Thanks @Boris31 for great kernel! I'm using it right now, It is faster than the stock one, a little bit, but it seems that's not quite battery friendly. What I want to say is that I'm truly satisfied, keep it up with great work!!! Hope next release will be soon

somboons said:
Thank you , Can it use in ROM Port ?
Click to expand...
Click to collapse
Yeah sure mate

Killy J. said:
Thanks @Boris31 for great kernel! I'm using it right now, It is faster than the stock one, a little bit, but it seems that's not quite battery friendly. What I want to say is that I'm truly satisfied, keep it up with great work!!! Hope next release will be soon
Click to expand...
Click to collapse
Thanks for kind words it really helps me a lot. I'm new to kernel development I learn new things everyday so optimizations and battery is my 1st thing to concentrate on.

@Boris31 ; Does this kernel works with CloudyG2 3.0 modified by @somboons ?

casual_kikoo said:
@Boris31 ; Does this kernel works with CloudyG2 3.0 modified by @somboons ?
Click to expand...
Click to collapse
Yes it should work please try and report back if you can. Thanks

Boris31 said:
Yes it should work please try and report back if you can. Thanks
Click to expand...
Click to collapse
Ok, thanks guy, I flash it and I'll report you!

Will this work on v30e and does it support fast charging?

Boris31 said:
Yes it should work please try and report back if you can. Thanks
Click to expand...
Click to collapse
Nope, it not works, bootloop after installation..

casual_kikoo said:
Nope, it not works, bootloop after installation..
Click to expand...
Click to collapse
Don't work.

casual_kikoo said:
Nope, it not works, bootloop after installation..
Click to expand...
Click to collapse
casual_kikoo said:
Ok, thanks guy, I flash it and I'll report you!
Click to expand...
Click to collapse
somboons said:
Don't work.
Click to expand...
Click to collapse
Well, cloudyg3 is based on f320 system so it's maybe because of that. I know that f320l/k/s on kitkat could boot with a d802 kernel but had problems like Fmradio etc.. i dont know why it does not work here so wait for cloudy to release it official or maybe I will try to find how fix it.
@somboons which kernel did you use in modded cloudyg3?

Boris31 said:
Well, cloudyg3 is based on f320 system so it's maybe because of that. I know that f320l/k/s on kitkat could boot with a d802 kernel but had problems like Fmradio etc.. i dont know why it does not work here so wait for cloudy to release it official or maybe I will try to find how fix it.
@somboons which kernel did you use in modded cloudyg3?
Click to expand...
Click to collapse
There is not my work maybe from VN. Base F320 .I have unpacked ramdisk I saw f320 in properties fils But I can't remember the name.
I think these kernel modify from f320 for D802.

somboons said:
There is not my work maybe from VN. Base F320 .I have unpacked ramdisk I saw f320 in properties fils But I can't remember the name.
I think these kernel modify from f320 for D802.
Click to expand...
Click to collapse
Yes that is the reason why it doesn't work it needs to be modified f320 ramdisk for d802 i think

[ROM] 6045-ELUGA-DCZ - stock, oc kernel, gapps, root - 1.1

**************************************************
[ROM] 6045-ELUGA-DCZ
current version 1.1 (2016-03-24)
STOCK, STABLE, ROOT, GAPPS
**************************************************​
-I made it just for fun...
-it is not exactly a build. Its more a mod.
-based on latest PANASONIC ELUGA SWITCH (IDOL3 rebranded device) firmware (EB-90S55EWLv1009)
-I exchanged the kernel for the ARDE DEV TEAM STOCK OC one (4x1651 MHz + 4x1601 MHz).I used Group 1 kernel for my 6045Y device.
-including ROOT and GAPPS (latest supersu 2.65)
-added KERNEL ADIUTOR
-removed all unnecessary apps from TCL, PANASONIC and GOOGLE. There is only the necessary basic to run the phone. All other things you can download by yourself. So the ROM is about 900 MB on size.
-Due to source is the avaliable set of languages shrinken to see screenshots. But More Locale 2 app (preinstalled, but removable) will do the trick for you on most apps (except settings).
GUIDE:
-go to TWRP recovery (please make sure you use the @Unjustified Dev version from here
-wipe chache/dalvik/system/data
-install ROM
-If you are on 6045I or 6045K you have to download ad flash at this point the GROUP 2 OC Kernel from the htcmania.com site (see link below)
-wipe chache/dalvik/ (to be sure)
-reboot
DOWNLOAD:
From my google disk (size aprox 900 MB)
Here are all Kernels from ARDE DEV TEAM and the 6045I stock (6045Y stock, 6045Y OC , 6045I OC and 6045I stock)
ISSUES:
I dont know of any, you tell me.
changelog in 1.1 build (2016-03-24)
-just initial build..all as it is on stock, except kernel
CREDITS:
BIG thnax to @franq36 and @acura2201 of ARDE DEV Team for the Kernel, also thank @Grarak for the Kernel Adiutor.
Also Thanx to @Unjustified Dev, @famewolf, @Marionette and all the others who are making a great work for our device.
There is the link to the HTCMania.com KERNEL thread (Spanish)
And of course i am not responsible for any damage you do by flashing this on your device!

please wait amoment..my upload is slooow

nice i will test it

DallasCZ said:
-based on latest PANASONIC ELUGA SWITCH (IDOL3 rebranded device) firmware (EB-90S55EWLv1009)
Click to expand...
Click to collapse
nice :good:
same hardware?

franq36 said:
nice :good:
same hardware?
Click to expand...
Click to collapse
yes, same hardware, just rebranded.

DallasCZ said:
yes, same hardware, just rebranded.
Click to expand...
Click to collapse
thath means more developers

i think it will be the same like i806...very little people will buy it. In china you can see even on TCL brand many users, many ports and many devs. On I806 there is only one dev in china.

I tried this out of curiosity, it didn't go so well... It freezes, screen shuts off then I have to restart it. Other then the freezing it looked pretty good, and I thought the Boot animation was funny on this phone.

tbkrazeey said:
I tried this out of curiosity, it didn't go so well... It freezes, screen shuts off then I have to restart it. Other then the freezing it looked pretty good, and I thought the Boot animation was funny on this phone.
Click to expand...
Click to collapse
its running on arde dev oc kernel.. try to flash stock kernel. my cpu is capable to maintain the oc frequencies so i had no issues with that. Except the lags that are also on stock firmware on idol3.

I can hold oc on the other roms tho, that's what I've been using for a few days.(and running right now) but I'll try it when I get a chance to see.
Sent from my 6045X using XDA Labs

Hi guys, ROM very good and stable. But it seems to me that GPS very badly works, badly catches. Advise that it is possible to make to improve a signal of reception of GPS. Thanks
I solved a problem with reinstallation of GPS.conf

Hi DallasCZ,
Love the work you've done. Very efficient and usable, but I do have a stupid question: In regards of performance would you consider this more preferable in comparison to your 6045-i806-DCZ rom?
Also you state that 6045I users need to flash the GROUP 2 OC Kernel from htcmania.com and I assume this is the Nuevoboot_Alcatel_V1_6045I,6045K.img in your google drive as there no longer is a link to htcmania.com but I'd like your confirmation before I commit to this action.
Thank you for all the work you've put into this community!

Deadrem said:
Hi DallasCZ,
Love the work you've done. Very efficient and usable, but I do have a stupid question: In regards of performance would you consider this more preferable in comparison to your 6045-i806-DCZ rom?
Also you state that 6045I users need to flash the GROUP 2 OC Kernel from htcmania.com and I assume this is the Nuevoboot_Alcatel_V1_6045I,6045K.img in your google drive as there no longer is a link to htcmania.com but I'd like your confirmation before I commit to this action.
Thank you for all the work you've put into this community!
Click to expand...
Click to collapse
since this is a stock rom, you can try to boot it with the keel whats inside. Or you can try to backup your boot. img from your stock rom and flash it after you flash this eluga rom.

hello DCZ i would like to thank you for your work, it is from far the best rom i've tried everythig is working perfectly, good performance and good battery life too with the advanced interative gov settings, really it's the best, all the stock stuff that we love about our phone, smooth (not the launcher still need of nova or else),no bugs no random reboot, lighter than the stock rom and with all the languages and the playstore as well. I definitely recommend this rom for those who want to have the best expereience with the Idol 3 6045 and the most stable. The only thing that i miss is the cyanogen theme application which is awsome and all the cyanogen ringtones alarms and notifications sounds but maybe someone can do something about it one day . Once again THANK YOU!!!!!

tizoreol said:
hello DCZ i would like to thank you for your work, it is from far the best rom i've tried everythig is working perfectly, good performance and good battery life too with the advanced interative gov settings, really it's the best, all the stock stuff that we love about our phone, smooth (not the launcher still need of nova or else),no bugs no random reboot, lighter than the stock rom and with all the languages and the playstore as well. I definitely recommend this rom for those who want to have the best expereience with the Idol 3 6045 and the most stable. The only thing that i miss is the cyanogen theme application which is awsome and all the cyanogen ringtones alarms and notifications sounds but maybe someone can do something about it one day . Once again THANK YOU!!!!!
Click to expand...
Click to collapse
hust download any cyanogen rom, and get the media directory from system and there are all soinds you want.

Hi DallasCZ, thanks for your work. And it is possible to implement in [ROM] 6045-ELUGA-DCZ the hidden settings, how on [ROM] 6045-i806-DCZ 1.2?

Feodorus 4PDA said:
Hi DallasCZ, thanks for your work. And it is possible to implement in [ROM] 6045-ELUGA-DCZ the hidden settings, how on [ROM] 6045-i806-DCZ 1.2?
Click to expand...
Click to collapse
meybe if i have time. I made this only for fun.
To implement the mods i made on DCZ means to decompile framework and some other apks then change the apks, compile again and test.

DallasCZ said:
meybe if i have time. I made this only for fun.
To implement the mods i made on DCZ means to decompile framework and some other apks then change the apks, compile again and test.
Click to expand...
Click to collapse
Thanks, if that it is ready to become a tester for you

Are you no longer developing this one? I was curious how it compared to the i806 version?

famewolf said:
Are you no longer developing this one? I was curious how it compared to the i806 version?
Click to expand...
Click to collapse
i am not a developer. I am just a modder. I have no time and if, i would only make some minor osmetics mods, so the performance would not change a lot.