**************************************************
[ROM] 6045-ELUGA-DCZ
current version 1.1 (2016-03-24)
STOCK, STABLE, ROOT, GAPPS
**************************************************
-I made it just for fun...
-it is not exactly a build. Its more a mod.
-based on latest PANASONIC ELUGA SWITCH (IDOL3 rebranded device) firmware (EB-90S55EWLv1009)
-I exchanged the kernel for the ARDE DEV TEAM STOCK OC one (4x1651 MHz + 4x1601 MHz).I used Group 1 kernel for my 6045Y device.
-including ROOT and GAPPS (latest supersu 2.65)
-added KERNEL ADIUTOR
-removed all unnecessary apps from TCL, PANASONIC and GOOGLE. There is only the necessary basic to run the phone. All other things you can download by yourself. So the ROM is about 900 MB on size.
-Due to source is the avaliable set of languages shrinken to see screenshots. But More Locale 2 app (preinstalled, but removable) will do the trick for you on most apps (except settings).
GUIDE:
-go to TWRP recovery (please make sure you use the @Unjustified Dev version from here
-wipe chache/dalvik/system/data
-install ROM
-If you are on 6045I or 6045K you have to download ad flash at this point the GROUP 2 OC Kernel from the htcmania.com site (see link below)
-wipe chache/dalvik/ (to be sure)
-reboot
DOWNLOAD:
From my google disk (size aprox 900 MB)
Here are all Kernels from ARDE DEV TEAM and the 6045I stock (6045Y stock, 6045Y OC , 6045I OC and 6045I stock)
ISSUES:
I dont know of any, you tell me.
changelog in 1.1 build (2016-03-24)
-just initial build..all as it is on stock, except kernel
CREDITS:
BIG thnax to @franq36 and @acura2201 of ARDE DEV Team for the Kernel, also thank @Grarak for the Kernel Adiutor.
Also Thanx to @Unjustified Dev, @famewolf, @Marionette and all the others who are making a great work for our device.
There is the link to the HTCMania.com KERNEL thread (Spanish)
And of course i am not responsible for any damage you do by flashing this on your device!
please wait amoment..my upload is slooow
nice i will test it
DallasCZ said:
-based on latest PANASONIC ELUGA SWITCH (IDOL3 rebranded device) firmware (EB-90S55EWLv1009)
Click to expand...
Click to collapse
nice :good:
same hardware?
franq36 said:
nice :good:
same hardware?
Click to expand...
Click to collapse
yes, same hardware, just rebranded.
DallasCZ said:
yes, same hardware, just rebranded.
Click to expand...
Click to collapse
thath means more developers
i think it will be the same like i806...very little people will buy it. In china you can see even on TCL brand many users, many ports and many devs. On I806 there is only one dev in china.
I tried this out of curiosity, it didn't go so well... It freezes, screen shuts off then I have to restart it. Other then the freezing it looked pretty good, and I thought the Boot animation was funny on this phone.
tbkrazeey said:
I tried this out of curiosity, it didn't go so well... It freezes, screen shuts off then I have to restart it. Other then the freezing it looked pretty good, and I thought the Boot animation was funny on this phone.
Click to expand...
Click to collapse
its running on arde dev oc kernel.. try to flash stock kernel. my cpu is capable to maintain the oc frequencies so i had no issues with that. Except the lags that are also on stock firmware on idol3.
I can hold oc on the other roms tho, that's what I've been using for a few days.(and running right now) but I'll try it when I get a chance to see.
Sent from my 6045X using XDA Labs
Hi guys, ROM very good and stable. But it seems to me that GPS very badly works, badly catches. Advise that it is possible to make to improve a signal of reception of GPS. Thanks
I solved a problem with reinstallation of GPS.conf
Hi DallasCZ,
Love the work you've done. Very efficient and usable, but I do have a stupid question: In regards of performance would you consider this more preferable in comparison to your 6045-i806-DCZ rom?
Also you state that 6045I users need to flash the GROUP 2 OC Kernel from htcmania.com and I assume this is the Nuevoboot_Alcatel_V1_6045I,6045K.img in your google drive as there no longer is a link to htcmania.com but I'd like your confirmation before I commit to this action.
Thank you for all the work you've put into this community!
Deadrem said:
Hi DallasCZ,
Love the work you've done. Very efficient and usable, but I do have a stupid question: In regards of performance would you consider this more preferable in comparison to your 6045-i806-DCZ rom?
Also you state that 6045I users need to flash the GROUP 2 OC Kernel from htcmania.com and I assume this is the Nuevoboot_Alcatel_V1_6045I,6045K.img in your google drive as there no longer is a link to htcmania.com but I'd like your confirmation before I commit to this action.
Thank you for all the work you've put into this community!
Click to expand...
Click to collapse
since this is a stock rom, you can try to boot it with the keel whats inside. Or you can try to backup your boot. img from your stock rom and flash it after you flash this eluga rom.
hello DCZ i would like to thank you for your work, it is from far the best rom i've tried everythig is working perfectly, good performance and good battery life too with the advanced interative gov settings, really it's the best, all the stock stuff that we love about our phone, smooth (not the launcher still need of nova or else),no bugs no random reboot, lighter than the stock rom and with all the languages and the playstore as well. I definitely recommend this rom for those who want to have the best expereience with the Idol 3 6045 and the most stable. The only thing that i miss is the cyanogen theme application which is awsome and all the cyanogen ringtones alarms and notifications sounds but maybe someone can do something about it one day . Once again THANK YOU!!!!!
tizoreol said:
hello DCZ i would like to thank you for your work, it is from far the best rom i've tried everythig is working perfectly, good performance and good battery life too with the advanced interative gov settings, really it's the best, all the stock stuff that we love about our phone, smooth (not the launcher still need of nova or else),no bugs no random reboot, lighter than the stock rom and with all the languages and the playstore as well. I definitely recommend this rom for those who want to have the best expereience with the Idol 3 6045 and the most stable. The only thing that i miss is the cyanogen theme application which is awsome and all the cyanogen ringtones alarms and notifications sounds but maybe someone can do something about it one day . Once again THANK YOU!!!!!
Click to expand...
Click to collapse
hust download any cyanogen rom, and get the media directory from system and there are all soinds you want.
Hi DallasCZ, thanks for your work. And it is possible to implement in [ROM] 6045-ELUGA-DCZ the hidden settings, how on [ROM] 6045-i806-DCZ 1.2?
Feodorus 4PDA said:
Hi DallasCZ, thanks for your work. And it is possible to implement in [ROM] 6045-ELUGA-DCZ the hidden settings, how on [ROM] 6045-i806-DCZ 1.2?
Click to expand...
Click to collapse
meybe if i have time. I made this only for fun.
To implement the mods i made on DCZ means to decompile framework and some other apks then change the apks, compile again and test.
DallasCZ said:
meybe if i have time. I made this only for fun.
To implement the mods i made on DCZ means to decompile framework and some other apks then change the apks, compile again and test.
Click to expand...
Click to collapse
Thanks, if that it is ready to become a tester for you
Are you no longer developing this one? I was curious how it compared to the i806 version?
famewolf said:
Are you no longer developing this one? I was curious how it compared to the i806 version?
Click to expand...
Click to collapse
i am not a developer. I am just a modder. I have no time and if, i would only make some minor osmetics mods, so the performance would not change a lot.
Related
PMDROID AOSP Gingerbread ROM100% AOSP Android Gingerbread Build from Source.
Be sure that you're based on a Froyo FW! CRUCIAL.
2 Sdcards Mount on PC, new Kernel and Prerooted
Version 0.2 New Fixes
Version 0.1 Initial Release
What's working:
MTD
Radio
Audio
GPS
Wifi
Bluetooth
3D
HQ Video PLayback
internal SD-Card
external SD-Card
Most Sensors
What's not working:
Polling problem on RIL (works after lock and unlock)
Compass (works not at 100%)
USB sharing of external SD-Card
commands: reboot recovery, reboot download (maybe not possible to implement)
FM-Radio
TV-Out
The same Like Cyanogenmod
1: Load these files:
2: Copy all files except:
speedmod-kernel-k13c-500hz.tar & cm7-galaxys-initial-kernel.tar
3: Flash speedmod-kernel-k13c-500hz.tar via Odin, wait for reboot and after that shutdown
4: Start via 3-button-combo in recovery mode and install galaxys-efsbackup.zip
5: Pull out battery and in again, start via 3-button-combo via download mode and flash cm7-galaxys-initial-kernel.tar via Odin BUT DON'T check repartition and auto reboot
6: Pull out the USB cable and start (in download mode) with 3-button-combo in recovery mode (waiting until samsung logo appears)
7: Choose "mounts & storage" and format system, data, cache
8: Flash PMDroid AOSP Gingerbread.
not to be an ass but maybe you should give credits to some people and upload your code to a github etc. rep since you are most likely using code of the cm7 project and google.
thx for your work gonna try it
it sounds so well men, great work!
Nice copy and paste from the MIUI thread nah it's cool, looks good but remember to give cred to all involved .
Sent from my GT-I9000 using XDA Premium App
[ROM] PMDroid AOSP Gingerbread 2.3.3
Click to expand...
Click to collapse
hm,
it's not even AOSP
it's modified AOSP thus CM7
any modifications you made to the kernel source ?
thanks !
It's Your Kernel and i will add it to the Op tomorrow
sorry for my Bad english
zacharias.maladroit said:
hm,
it's not even AOSP
it's modified AOSP thus CM7
any modifications you made to the kernel source ?
thanks !
Click to expand...
Click to collapse
Screenshots would be nice
It's so smooth!
This seems like a project heavily based off the work of the CM7 team and other kernel devs, only without the inherent benefits of CyanogenMod and the work the experienced developers have put into it. Exactly what is the benefit of this project?
Am I right in thinking you could take any nexus s rom and just slap this or bilboas kernel on it?
Sent from my GT-I9000 using XDA Premium App
chambo622 said:
This seems like a project heavily based off the work of the CM7 team and other kernel devs, only without the inherent benefits of CyanogenMod and the work the experienced developers have put into it. Exactly what is the benefit of this project?
Click to expand...
Click to collapse
Some people consider cm to be bloated as it comes with excessive features not required by some users.
Bloat == less responsive. So w/e there's cm builds, u'll see aosp builds.
Why ? One simple reason, u get stock and nothing but stock.
Daneshm90 said:
Some people consider cm to be bloated as it comes with excessive features not required by some users.
Bloat == less responsive. So w/e there's cm builds, u'll see aosp builds.
Why ? One simple reason, u get stock and nothing but stock.
Click to expand...
Click to collapse
To be honest I don't think there is any measurable difference in performance between CM and AOSP on a device like the Galaxy S...IMO the features outweigh any preconceived ideas about slower performance that aren't really based reality. But if it's all about the clean AOSP "feeling" then go right ahead.
chambo622 said:
To be honest I don't think there is any measurable difference in performance between CM and AOSP on a device like the Galaxy S...IMO the features outweigh any preconceived ideas about slower performance that aren't really based reality. But if it's all about the clean AOSP "feeling" then go right ahead.
Click to expand...
Click to collapse
Yup i completely agree, especially on these high end devices.
This idea of having aosp clean builds originated however from previous generation devices such as g1,magic...etc where aosp builds seemed to be preferred by a lot.
Daneshm90 said:
Yup i completely agree, especially on these high end devices.
This idea of having aosp clean builds originated however from previous generation devices such as g1,magic...etc where aosp builds seemed to be preferred by a lot.
Click to expand...
Click to collapse
My brother uses a G1 and on their it's clear that in order for Froyo or Gingerbread to be usable it needs to be as light as possible. But this primarily pertains to memory usage...CM6/7 is pretty smooth, just apps don't stay open.
On Galaxy S I don't really think pure AOSP has any tangible benefits over CM7 which is quite obviously based on AOSP. For instance, MIUI, while it should feel more "bloated," feels 100% the same performance wise as CM7 which is great (they share kernel etc. so that makes sense)
Hey Guys,
I installed this on my cappy cause I wanted less bloat. Change the lib files for auto-rotation and flashed bilboas kernel. Working fine. Issue is this dosen't have root. How would I go about doing that? I tried super one click, but it freezes the app. Any help would be appreciated.
MAMBO04 said:
Nice copy and paste from the MIUI thread nah it's cool, looks good but remember to give cred to all involved .
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Yeah... nice "description" there.
Anyway, good luck with the project then.
Sent from my GT-I9000 using XDA App
phoenix2217 said:
Hey Guys,
I installed this on my cappy cause I wanted less bloat. Change the lib files for auto-rotation and flashed bilboas kernel. Working fine. Issue is this dosen't have root. How would I go about doing that? I tried super one click, but it freezes the app. Any help would be appreciated.
Click to expand...
Click to collapse
On the zip file of the rom, copy the superuser apk onto /system/app
Then just reinstall the rom
Enviado desde mi GT-I9000 con android 2.3.3
awesome project, hopefully your project will soon overtake cm7 in terms of development speed. I have been waiting for a stable aosp like rom for almost a year now cm7 doesn't cut it for me, battery drain is crazy. Please keep at it and thank you very much
Sent from my GT-I9000 using XDA App
Nice !
I'll test it
schiphol said:
awesome project, hopefully your project will soon overtake cm7 in terms of development speed. I have been waiting for a stable aosp like rom for almost a year now cm7 doesn't cut it for me, battery drain is crazy. Please keep at it and thank you very much
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Have you done any reading? This project is entirely dependent on the work that codeworkx and the CM7 team has been doing. This project won't "overtake it"; I doubt this dev (no offense to OP) has anywhere near the experience or technical ability to troubleshoot problems with AOSP on Galaxy S like codeworkx, dumdidum, et all have been doing for months.
Battery drain on CM7 (and other ROMs that utilize its work like MIUI) is worse than Samsung based ROMs, sure. But it's not "crazy" at all and for my usage patterns isn't even a problem...I charge every night anyway. To me it's either one full day, or two full days, not in between. I've never had a ROM last me through two full days, therefore, I need to charge every night and it doesn't matter if I have 20% or 40% left.
So I am here to present upon thee my newest and likely last ROM for the Galaxy W: The Kezra Value Pack!
So what's new in this ROM compared to Kezra V4?
Well first off it's based off of the newest EUR firmware by Samsung, the infamous Value Pack that adds Face Unlock among other features to our phone (if you want a full changelist, look it up, Google is your friend). As per usual in a custom ROM, this one is rooted, deodexed, busybox'd and all that pretty stuff.
The custom Kernel present in this ROM is Cowithgun's latest modification of the Arco68 kernel for our phones. It adds tons of neat features, among the biggest on them being the ability to overclock your phone up to 1800MHz should you want to.
I can assure you the ROM is quite stable and should work without a hitch.
As for differences with Kezra V4 in terms of the applications inside here's the quick rundown:
1. I have dropped my arrogance and included most apps that people want (except for Polaris Office) and use. If you don't want a certain app, feel free to use Titanium Backup to remove it.
2. This ROM was shaped to be as close a copy of Cow's V7 ROM except that I have put an emphasis on the Gaming/Social aspect and left the Game and Social hubs from the TouchWiz Framework (CowPanel and Zeam are also included).
3. Kept the Samsung boot animation and sound because I think it's prettier that way
So here's the download links for those that want it:
Part 1: http://www.mediafire.com/download.php?evegdav60862a48
Part 2: http://www.mediafire.com/download.php?a2881jow2u2782m
(use HJSplit to join the 2 files and make the update zip)
Instructions:
1. Download files;
2. Join files using HJSplit;
3. Copy ZIP to SDCard;
4. Format system/cache/data
5. Flash ROM
6. ????
7. Profit!
F.A.Q.
(1) Will this ROM work on the Exhibit 2 4G?
A: No idea. Ask the devs for the Exhibit 2. The hardware is quite similar but some things do differ.
(2) Is this CM7?
A: No, it is not. I unfortunately do not have the time to dedicate to porting CM7 over to the SGW. I am sorry
(3) What are the advantages of this ROM over stock?
A: It is rooted and much faster. Try it out yourself.
(4) Will you update this further?
A: Probably not. Only if there are CRITICAL bugs that need fixing.
(5) Is this overclockable?
A: Why, yes it is. Glad you asked
Version History:
V1: Initial Version
Changes are listed in Post #1
V1.1: Fixed Version
- Implemented Arco's Bionic optimizations (thanks to Cow)
- Fixed CowPanel to actually do something.
Special Thanks:
Arco68 for helping me guiding me in this odyssey that is making Android builds and teaching me how the updater-script thing works and for allowing me to test some stuff which really helped me release this. Also for his custom Ancora kernel dsixda for his awesome kitchen in which I cooked this ROM.
dsixda for his awesome kitchen in which I cooked this ROM and adapting it to our phones
cowithgun for his superb work with overclocking and tweaking Arco's kernel.
Awesome... Thought you stopped your work on custom ROMS for wonder... Great to have you back. Are you going to use latest kernel from cow ROM no.7?
Sent from my GT-I8150 using XDA
MAMUTHcz said:
Awesome... Thought you stopped your work on custom ROMS for wonder... Great to have you back. Are you going to use latest kernel from cow ROM no.7?
Sent from my GT-I8150 using XDA
Click to expand...
Click to collapse
I have "stopped". I am just doing this because I believe EU users need and kinda deserve an EU ROM with most features from Cow's Kernel. And yes, I am using the kernel from Bionic Cow nº7
edit: atm I have a booting alpha ROM that already has the custom kernel and is rooted+busybox. Just testing a few things out, then it's on to the beta phase.
Well in that case, thank you kindly Sir
To be honest I almost lost hope for new euro ROM, that could be compared to cow's ROMS. Fortunately we have you
Sent from my GT-I8150 using XDA
MAMUTHcz said:
Well in that case, thank you kindly Sir
To be honest I almost lost hope for new euro ROM, that could be compared to cow's ROMS. Fortunately we have you
Sent from my GT-I8150 using XDA
Click to expand...
Click to collapse
I will try to replicate Cow's ROM to the best of my ability although there are a few slight changes that deviate more from our stance when it comes to using a phone. He has removed the entire Social Framework (and the GameHub) from the TouchWiz framework, while I opt to keep it (I like my Gaming/Social stuff). On the other hand I opt to remove pointless bloatware like PolarisOffice (which sucks) and other stuff that is inserted in there just to occupy space.
edit: done and uploading.
Nice m8 glad to see you back
Sent from my GT-I8150
where have u been kezra
i thought u were stop developing our wonder, coz i like your customrom, since i using your V4 rom until now . . .
btw, glad to see u back developing our wonder , keep up bro :beers
Does this rom have the Italian language?
Inviato dal mio GT-I9100 usando Tapatalk
ROMKezra Value Pack V1
based 2.3.6 Romani/I8150DXLC1_I8150OLBLA1_I8150DXLC1
Installing update...
Thank you very much bro.
A quick ROM update is coming today, with the Bionic optimizations and a bugfix to CowPanel. But that should be the last version of the ROM.
Waiting for updates!
Thanks kezra for your work!
Sent from my GT-I8150 using XDA
KezraPlanes said:
A quick ROM update is coming today, with the Bionic optimizations and a bugfix to CowPanel. But that should be the last version of the ROM.
Click to expand...
Click to collapse
Maybe i can help to MOD after that
Rio Saputro said:
Maybe i can help to MOD after that
Click to expand...
Click to collapse
I'll do my best too
Anyway, will I have to wipe everything again with v2? I just finished reinstalling :-D
Sent from my GT-I8150 using XDA
Unfortunately I always set my ROMs to wipe everything to avoid issues... You can always back them up with titanium backup, or not update. The fixes are minor anyway. But you'll see when I update the thread in about 2h
KezraPlanes said:
Unfortunately I always set my ROMs to wipe everything to avoid issues... You can always back them up with titanium backup, or not update. The fixes are minor anyway. But you'll see when I update the thread in about 2h
Click to expand...
Click to collapse
Not update is impossibile, I have some sort of compulsion that forces me to have everything at the latest avaiable version
Anyway I understand why you set it to wipe, I'll just install everything again. Restoring with Titanium often leads to issues :-D
I'm already working on the 14 toggle MOD based on this ROM.
Sent from my GT-I8150 using XDA
ROM Uploaded and links updated. Enjoy
Typouse HJSplit to join the 3 files and make the update zip)
.
.
.
sediROM - or why I created a new ROM based on the good old ("ancient") ICS
.
.
.
Long story short. The following list are my requirements to a custom ROM:
I need my phone everyday so I need to resist that it is working everyday (means rock stable).
I do NOT need the latest available Android version.
I WANT to have the other components (like Kernel etc) up to date.
I REALLY REALLY need headset profiles for my bluetooth devices (Jabra, Nokia and Plantronics)
I need root access, of course.
I want to get the best battery life possible.
GB is too old for me.
Stock ROM is "too stock" for me.
I have tried all available captivate ROMs starting from ICS over Jelly Bean to KitKat.
Android < v4.x are too old for my requirements. Several features missing and well it even LOOKS old..
Android >= v4.1 are working well with the Glide but there is 1 main killer function which is completely broken since Android 4.1: Bluetooth Headset Profiles
(The Bluetooth stack was completely re-developed in 4.1)
The version which is the best compromise of beeing fresh enough - but working like a charm is Android v4.0.4 (ICS)
The problem is.. there is no ICS based ROM out there which completely fullfill ALL my requirements.
So I thought it is time for me to create my own daily-use feature-complete and rock stable ROM for the Samsung Captivate Glide / SGH - I927..
IMO the best working and best battery saving ROM for the Glide is PACMAN ROM (used pac_i927-milestone.1.RC1.4.zip)!
The problem: the earliest version of it is based on Android 4.1 which is a No-Go for me because of Bluetooth HSP.
--> I recommend the mentioned version of PACman as your daily driver if you do NOT need BT HSP. I had it running several weeks without any problems but really great battery saving.
.. well that said I couldn't fork PACman ..
So I've downgraded to all available ICS based ROM again (which was VERY painful because of broken links to the apps because of different mount point names etc).
I have tried those all again (IcePOP, Cranium, Stock, DMans ICS, etc.) but no was "as good as" LiteROM (IMHO) - which I used several weeks before.
.. so +1 for forking LiteROM ...
The problem with LiteROM is that there are still issues and no further development is done on it.
Some of the major LiteROM issues for me (those are also the reasons why I first tried newer Android versions):
It looses the paired devices after a reboot ! (but that sounded to me like it can be fixed somehow)
The lags/waits when pressing the power button to switch the display on
Battery life is not the best
not the latest Kernel
many little things in the installer like it re-installs everything when only switching to another modem etc.
Nevertheless LiteROM is still the best base I can get (because it fits to my requirements best and is rock stable) and therefore I started in May 2014 the build of sediROM which is a fork of LiteROM v0.9.
UPDATE:
sediROM is officially available and have tons of fixes and enhancements inside. Check it out in the DEV thread:
--> http://forum.xda-developers.com/showthread.php?t=2789727
Best regards
xdajog :victory:
what kernel do you use? Stock or litekernel?
Replacing kernel is very easy.
No documentation for BT sound, I dont think anybody would fix it. I've tried to find dev to find alsa HAL ( that is for voip sound fix), and no luck, while fixing alsa much more easier then fix BT sound.
Somebody tried to port cm10, it has many issue, you can find that topic in dev forum.
The idea for sediROM is to have a very well tested setup of default settings (like which kernel, etc.) but the free choice to modify it later whenever you like it.
bubor said:
what kernel do you use? Stock or litekernel?
Click to expand...
Click to collapse
Well not 1 only ... there are 4 available atm (and more when I find them and find them good enough...) (while using LiteKernel v1.2.2 as default atm - but you have the free choice)
Stock Kernel
LiteKernel v4.0 OverClocked and without UnderVoltage
LiteKernel v1.2.2 GPU not OverClocked and with UnderVoltage
LiteKernel v1.2.2 GPU OverClocked and with UnderVoltage
I tried with the ardatdat 4.x Kernels,too but without success.
Replacing kernel is very easy.
Click to expand...
Click to collapse
Well yes and nowhere such comfortable as in sediROM You can choose one of the above within the aroma installer. The same for several Modems which coming with LiteROM already (nice for testing around).
No documentation for BT sound, I dont think anybody would fix it. I've tried to find dev to find alsa HAL ( that is for voip sound fix), and no luck, while fixing alsa much more easier then fix BT sound.
Somebody tried to port cm10, it has many issue, you can find that topic in dev forum.
Click to expand...
Click to collapse
BT sound? Do you have any issues here? For me BT sound itself is working great (using it daily in my car)?! But you talked about voip - is your problem skype related?
Regards
xdajog
xdajog said:
The idea for sediROM is to have a very well tested setup of default settings (like which kernel, etc.) but the free choice to modify it later whenever you like it.
Well not 1 only ... there are 4 available atm (and more when I find them and find them good enough...) (while using LiteKernel v1.2.2 as default atm - but you have the free choice)
Stock Kernel
LiteKernel v4.0 OverClocked and without UnderVoltage
LiteKernel v1.2.2 GPU not OverClocked and with UnderVoltage
LiteKernel v1.2.2 GPU OverClocked and with UnderVoltage
I tried with the ardatdat 4.x Kernels,too but without success.
Well yes and nowhere such comfortable as in sediROM You can choose one of the above within the aroma installer. The same for several Modems which coming with LiteROM already (nice for testing around).
BT sound? Do you have any issues here? For me BT sound itself is working great (using it daily in my car)?! But you talked about voip - is your problem skype related?
Regards
xdajog
Click to expand...
Click to collapse
would you point to sediROM? I couldnt find anything with google.
I dont know what is litekernel v4, I tought the last one was 2.x or less.
Litkernel has many power save improve, but it has many bugs too,
You have said already headset doesnt work, or does it work? I'm confused.
bubor said:
would you point to sediROM? I couldnt find anything with google.
Click to expand...
Click to collapse
It will be available soon - The first barrier was the post restriction which is ok now And now I need to find a place for uploading the 430 MB and then I will post it in the dev area..
I dont know what is litekernel v4, I tought the last one was 2.x or less.
Litkernel has many power save improve, but it has many bugs too,
Click to expand...
Click to collapse
--> http://goo.im/devs/thegreatergood/LiteKernel/ICS
You have said already headset doesnt work, or does it work? I'm confused.
Click to expand...
Click to collapse
Oh no I said Bluetooth is generally working fine in Android v4.0 and therefore in sediROM / LiteROM but not in other ROMs which are based on Android 4.1 or higher
--> The only thing which are not perfect in v4.0 (or especially in LiteROM) is that Bluetooth Pairing are lost after rebooting.
--> ... and that is fixed in sediROM
Smashing! :laugh: I have been roaming around for something like this! Bloody awesome! Let me know when you have the download link ready! I will be glad to test it, and if it is stable as stock ICS I will definitely keep it as my DD! Thanks in advance for this! If you say it is indeed a fork for LiteROM with no bugs it will be the s#$)!!! And of course a keeper. Same as you, I´ve tried almost every ROM available for our cappy, but never totally satisfied with none. :fingers-crossed: Hoping this ROM is what I have been looking for. What exactly did you fix, aside from the pairing issues? Any luck with the automatic toggles, Force close issues, deep sleep power button.... :fingers-crossed::fingers-crossed::fingers-crossed:
Man gimme more details! Freakin excited here :silly: jue jue jue jue
lasuazo said:
Smashing! :laugh: I have been roaming around for something like this! Bloody awesome! Let me know when you have the download link ready! I will be glad to test it, and if it is stable as stock ICS I will definitely keep it as my DD! Thanks in advance for this! If you say it is indeed a fork for LiteROM with no bugs it will be the s#$)!!! And of course a keeper. Same as you, I´ve tried almost every ROM available for our cappy, but never totally satisfied with none. :fingers-crossed: Hoping this ROM is what I have been looking for. What exactly did you fix, aside from the pairing issues? Any luck with the automatic toggles, Force close issues, deep sleep power button.... :fingers-crossed::fingers-crossed::fingers-crossed:
Man gimme more details! Freakin excited here :silly: jue jue jue jue
Click to expand...
Click to collapse
whooa keep calm my friend
as said I try to solve all the problems I saw in my case and that's what I fixed. If that fixes all yours.. - I don't know
The thing which sounds interesting to me is that you talk about automatic toggles and force closes.
I never seen automatic toggles and force closes but it may be because I use another Kernel. Well we will see when you have tried it .
I cannot promise it is bug free (in this early state of this ROM there is at least 1 known bug - to be honest) but I may can help to fix things..
Rest and details coming soon... :angel:
I'd definitely be interested in testing your ROM. Your idea is more or less what I wanted for my i927. Hope to be able to try it soon.
xdajog quick question mate, which Kernel have you been using so far? Stock Kernel, Litekernel (version)?
I remember lite kernel causes battery drain in ics
Sent from my SGH-I927 using XDA Premium 4 mobile app
Androide3 said:
I remember lite kernel causes battery drain in ics
Sent from my SGH-I927 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Exactly, that is why I would like to know which kernel would be recommended Never tried liteRoM with stock kernel
Will be fun to test out. I mostly stick to CM11 but I like to try out others often.
lasuazo said:
xdajog quick question mate, which Kernel have you been using so far? Stock Kernel, Litekernel (version)?
Click to expand...
Click to collapse
Androide3 said:
I remember lite kernel causes battery drain in ics
Click to expand...
Click to collapse
Well that point is not totally fixed yet. I'm currently using Litekernel 1.2.2 in the not-overclocked version but also played around with the others - even Stock of course. That said I cannot say that I've found a perfect kernel (grakernel may the one but it is for JB and higher only ) and still testing others.
So the short answer is that there are not such differences between them when it comes to battery drain (see my post in the dev because that's one of the open points yet)
... and only to ensure that we have all the same understanding: sediROM is my experiment to go to / to get / to become the perfect stable but actual ROM for the Glide. It is "on it's way" you now
For becoming that I need feedback of course and I believe there will be many things I may not seen/use like you do so don't expect something "perfect"
xdajog said:
It will be available soon - The first barrier was the post restriction which is ok now And now I need to find a place for uploading the 430 MB and then I will post it in the dev area..
--> http://goo.im/devs/thegreatergood/LiteKernel/ICS
Click to expand...
Click to collapse
You are really miss the point.
4.0 means android version not kernel version.
The litekernel package includes a boot image, that boot.img include kernel,ramdisk.
Ramdisk is the root on your android. Litekernel has some ramdisk modification too ( https://github.com/thegreatergood/LiteKernel---Glide/tree/master/Build4.2/ramdisk/sbin/ext https://github.com/thegreatergood/L...ster/Build4.2/ramdisk/sbin/LiteKernel_Manager )
Grakernel should work with any rom, it doesnt change ramdisk, just replace kernel and install modules to /system/lib/modules. I think modules in you rom is in /lib/modules on ramdisk, so you need to change my install script to modify ramdisk.
bubor said:
4.0 means android version not kernel version.
Click to expand...
Click to collapse
oh I'm quite new in that and a little disappointed now :crying: Well kernel v1.x is not for Android 1.x so .. in a perfect world the version naming would be everytime the same.. so everyone would know what it means... So I it may be the same as one of the 1.x LiteKernels available.
Grakernel should work with any rom, it doesnt change ramdisk, just replace kernel and install modules to /system/lib/modules. I think modules in you rom is in /lib/modules on ramdisk, so you need to change my install script to modify ramdisk.
Click to expand...
Click to collapse
Hm so you say replacing the kernel, adding the modules and it should work?
I've tried that already but without success (booting but display keeps black with some green pixels ..)
As I can see in your link the Litekernel mods are note relevant for functioning or am I wrong? They seem to do some power saving stuff nothing else?
xdajog said:
oh I'm quite new in that and a little disappointed now :crying: Well kernel v1.x is not for Android 1.x so .. in a perfect world the version naming would be everytime the same.. so everyone would know what it means... So I it may be the same as one of the 1.x LiteKernels available.
Hm so you say replacing the kernel, adding the modules and it should work?
I've tried that already but without success (booting but display keeps black with some green pixels ..)
As I can see in your link the Litekernel mods are note relevant for functioning or am I wrong? They seem to do some power saving stuff nothing else?
Click to expand...
Click to collapse
Litekernel has 2 version string, one from the build version and one from android version. Litekernel has some power save codes, it cases that deep sleep issue IMHO.
Did you download kernel from i9103 forum or mine from http://dualhoki.vim.hu/bubor/dev/grakernel/ ? Sound like you have i9103 version.
bubor said:
Did you download kernel from i9103 forum or mine from http://dualhoki.vim.hu/bubor/dev/grakernel/ ? Sound like you have i9103 version.
Click to expand...
Click to collapse
it was yours (1.4.3) - but I will re-test it again to be sure..
I want to give a try
i am very very very interrested in your ROM!
The BT-Headset function is very important for me, because for my car hifi handsfree bluetooth mode.
Battery Life
Since we are on the topic of battery life... does KitKat have the best battery life, or should I be using something else?
VIPER Rom V1.2
This Rom tested for hundred times but im not take any responsibility for bricked devices.You can also flash Viper kernel on other stock based roms.
Features
Bassed on D802 20F ROM
Aroma installer
init.d support
SuperSU
Busybox+runparts
Odexed,Debloated,Zipaligned
Selectable camera (Xdabbeb's camera and stock)
Knock code support
Kernel is bassed on latest LG KK Source
Compiled with Lianro 4.8
CPU OC up to 2.5 GHz
CPU Voltage Control
Sweep2sleep
Zram
Governors
Ondemand
Performance
Powersave
Userspace
Conservative
i/o schedulers
ROW
CFQ
NOOP
DAEDLINE
Changelog
V1.2
Fixed Knock code problem
Fixed fastboot problem on some variants (It should get fixed 99% but not tested so test and report me.)
Added support for Canadian and Korean variants
Added sweep2sleep support
Replaced devil kernel manager with Kernel Tuner
Updated kernel base to 20b
Better battery performance
Removed lots of unuseless LG apps
V1.1
Upadated rom base to 20F
Added support for T-mobile,AT&T,Verizon and Sprint varients
Added knock code support
Now you can choose between stock camera and xdabbebs (in Aroma)
Some kernel improvments
Rom stability improved
V1.0
initial release
Installation
Full Wipe (Dalvik, Cache, System & Data)
Flash KitKat baseband
Install Viper Rom
Chose your device model and favorite apps in Aroma
Enjoy
Credits
Tnx @pedja1 For his awesome kernel configer app (Kernel Tuner)
Tnx @alireza7991 For his great helps (specialy in Zram)
Tnx @Cloudyfa For some of his Aroma scripts.
Tnx @xdabbeb For his nice camera.
Note
1- If you had any problem with knock on call 3845#*800x#* to open hidden settings.Then go to settings<Update Touch Firmware and you are done.
2-If you want a faster rom,enable developer options then change Window,Transition and Animator to .5x
3-There is a script in init.d folder (/system/etc/init.d) named CPU_CONFIG.This script Keeps CPU frequency on 2.26GHz while device is booting to avoid high temperature on boot.If you want a faster boot you can remove this script to boot up with 2.5 GHz (Not Recommended).
Supported models
Code:
D800,D801,D802,D803,D805,D806,F320K,F320L,F320S,LS980,VS980
Downloads
All downloads here
Kernel source code
Wow, awesome, a new DEV, welcome, will test the kernel, and will report soon.
What a fast response!!Thanks for testing.
Why 20a base? Lg make some update and now there is 20f base. Have a knock code this rom ?
Please add picture from Rom
Gesendet von meinem LG-D802 mit Tapatalk
all_x said:
Why 20a base? Lg make some update and now there is 20f base. Have a knock code this rom ?
Click to expand...
Click to collapse
I used older rom beacuse of some problems but i will use the new rom as soon as possible.And no there is no knock code.
cobra11111 said:
Please add picture from Rom
Gesendet von meinem LG-D802 mit Tapatalk
Click to expand...
Click to collapse
Screenshots added
I ran ViperOne on the HTC One M7, definitely going to check this out.
Not right now because of other things that need attention first, but definitely soon
glad to see something new. Welcome ,if I will change from I definitely try this one. And maybe in few days kernel too.keep it up
I have to try it, even though i am not into stock ROMs. I think no ROM should be ignored(if it's pretty stable) to encourage devs. I'll let other know about it?
Awesome man i love how the modding of this phone is increasing
This rom supose to be great, gonna test it soon as possible and make video review
Hey. Can I take your Kernel for my cloudyG3 Rom?
Thx
Sent from my LG-D802 using XDA Free mobile app
No D800?
c_brown93 said:
No D800?
Click to expand...
Click to collapse
Read the op till you figure out how redundant this question was.
Sent from my Vs980
serial1005 said:
Hey. Can I take your Kernel for my cloudyG3 Rom?
Thx
Sent from my LG-D802 using XDA Free mobile app
Click to expand...
Click to collapse
Of course you can.I tested this kernel on cloudyg3 and its also works on any stock bassed rom.(Please read op first)
Can U please not include camera mod in next version? Everyone including it, even if it can be done by yourself very easy... And I need stock camera, because this modded one, give me black screen 1-2 times a day. Accualy when I need camera most and need to reboot device to get it work. And thing that need to take photo at is away for good.
I assume this ROM is not associated with team venom who actually releases viper rom and are recognized as developers for HTC..
fuxmen said:
Can U please not include camera mod in next version? Everyone including it, even if it can be done by yourself very easy... And I need stock camera, because this modded one, give me black screen 1-2 times a day. Accualy when I need camera most and need to reboot device to get it work. And thing that need to take photo at is away for good.
Click to expand...
Click to collapse
There is no defference between stock camera and xdabbeb's camera beacause he just added some new features but he didnt change settings for normal recording and capturing and i tested it a lot and i didnt see any black screen
waiting for the version which supports Knock Code
July 18: New build is up. This is LP 5.1.1 r.8
Latest PA changes
FM radio incorporated
Slim Launcher instead of Launcher3
All hardened features are in
Latest M5 kernel with voltage, kcal, sound, hotplug, multiple governors and TWRP
Download Link: http://forum.xda-developers.com/devdb/project/dl/?id=13577
P.S. Although, clean install is preferred, you may flash dirty if you are upgrading from the prior PA version. Still, to escape conflicts I would format everything including internal sd, then flash the rom, then flash Supersu, then do Xposed if you use it, then restore data partition that you previously backed up with TWRP, then reboot
______________________________________________________________________________________________________
Rom Updated on July 13. Latest changes. Also new kernel based on M5 with numerous governors/sound/kcal/voltage and others.
Download Link: http://forum.xda-developers.com/devdb/project/dl/?id=13516
Credit for kernel to Myself5
Kernel Source: https://github.com/AOSPME/android_kernel_sony_msm8974
_______________________________________________________________________________
Here is the latest Paranoid Andoird LP5.1 for Honami. Latest AOSP/Paranoid features.
My changes:
1. All security features including ciphers, random number generation, 256 bit encryption, SElinux out included
2, Kernel with sound, screen calibration, voltage, overclocking and TWRP
3. Evil IPs removed
4. WIFI background scanning disabled
5. Network selection is handled by System and you can set any available combination in Cell Networks and your selection will stick
6. VOLTE enabled, you are all set if and when your carrier offers the service
7. Camera mike sound fixed
8. Thermanger tweaked to prevent flickering
Instructions:
1. Full factory reset and separate wiping of System/Cache/Data
2. Flash the rom
3. Reboot and enjoy
Warnings: If your device dies or kills everybody in the vicinity, blame yourself. This is XDA, if you can't help yourself, stick with stock
Another Warning: Please no dumb questions in this thread, such as: where is my network, I am on C6902; where is my recovery; where is the gapps; No comments like this: great rom, except for one thing ; can you take a nose from DirtyUnicorns and stich it to this rom; oh, my god, the phone bootloops.. This rom boots and works. Also, no complaining about bugs without posting a readable logcat. Again, if you can't help yourself by reading, no one will help you. Can I support multi-rom? Never, multirom/kexec the way it is implemented on Android (by teenagers who have no concept of security) is a glaring security hole exposing your phone to multiple threats...
Download Link: http://forum.xda-developers.com/devdb/project/?id=10677#downloads
Credit: Paranoid Android and Myself5 for initial kernel sources
Kernel Sources: https://github.com/HonamiZ1/android_kernel_sony_msm8974
XDA:DevDB Information
Paranoid Android LP5.1 Unofficial, ROM for the Sony Xperia Z1
Contributors
optimumpro
Source Code: https://github.com/HonamiZ1/android_kernel_sony_msm8974
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked Bootloader
Based On: AOSP
Version Information
Status: Stable
Stable Release Date: 2015-07-06
Created 2015-07-06
Last Updated 2015-07-18
Reserved
Reserved
Reserved
Mine...
Subscribed...
Sent from my Xperia Z1 using Tapatalk
You planning to regularly updating this build ?
Rom updated
New build is up. See the OP.
Please don't expect nightly files, which make no sense. There will be at least monthly updates or so.
The kernel in this build allows for much deeper undervolting. I have been testing different values in the past 24 hours and here is what I have:
300mhz 720
422mhz 730
652mhz 745
729mhz 765
883mhz 785
960mhz 800
1036mhz 810
1190mhz 825
1267mhz 840
1497mhz 860
1574mhz 880
1728mhz 900
1958mhz 925
2150mhz 950
And it is stable. No issues. I use lionheart cpu governor, which is the most lag free.
This works for all Z1's correct?
hakkai999 said:
This works for all Z1's correct?
Click to expand...
Click to collapse
If you have c6902, then you have to apply the patch to have network. Otherwise - yes.
Alright I got it to work. So far so good. Smooth as butter. Battery life is amazing. The only thing I sadly miss is the ability to use native Sony apps. I wish the Play Store would still count the phone as Z1.
Does anybody know a port for the stock Sony apps? Testing the ROM now. Thanks
Enviado do meu C6903 usando XDA Forums
nArdow said:
Does anybody know a port for the stock Sony apps? Testing the ROM now. Thanks
Enviado do meu C6903 usando XDA Forums
Click to expand...
Click to collapse
As far as I know you can't port the Sony apps because you need the Sony framework to run them.
LSD DREAMER said:
As far as I know you can't port the Sony apps because you need the Sony framework to run them.
Click to expand...
Click to collapse
That sucks. I wanted the camera and its libraries because the camera in this is less than stellar.
hakkai999 said:
That sucks. I wanted the camera and its libraries because the camera in this is less than stellar.
Click to expand...
Click to collapse
There is a port for camera.
http://forum.xda-developers.com/showthread.php?t=3154772
nArdow said:
There is a port for camera.
http://forum.xda-developers.com/showthread.php?t=3154772
Click to expand...
Click to collapse
Which one should I use? Its only for Dirty Unicorn, Resurrection Remix and CrDroid.
hakkai999 said:
Which one should I use? Its only for Dirty Unicorn, Resurrection Remix and CrDroid.
Click to expand...
Click to collapse
I didn' tested it. Yet. But it should work with all AOSP ROMs. I'm going to test and report back here
Could you please take this discussion about taking a nose from one rom and stiching it to this rom somewhere else?
Look in cross device development...
optimumpro said:
Could you please take this discussion about taking a nose from one rom and stiching it to this rom somewhere else?
Look in cross device development...
Click to expand...
Click to collapse
Sorry, m8.
Here... I just realised that there is two files for download. What are the differences between both?
nArdow said:
Sorry, m8.
Here... I just realised that there is two files for download. What are the differences between both?
Click to expand...
Click to collapse
Look at the dates: the latest one is July 13. If you want to look at changes, go to
https://github.com/aospa-l
optimumpro said:
Could you please take this discussion about taking a nose from one rom and stiching it to this rom somewhere else?
Look in cross device development...
Click to expand...
Click to collapse
Sorryyyy just wanted to have a better camera. You could at least... you know... advise us what our alternatives are? I mean we do love the rom. Just that we would want some features added.