This is stock lp kernel for our d802 compiled from lge source 30d. The main future of this kernel is to provide near stock experience with fixes and few modifications, to stay light as possible.
Futures:
Built with Linaro4.9 Toolchain by @Christopher83
Linux 3.4.0
Built using -O3 flags
Removed a lot of useless debugging and more to come
Exfat support thanks @faux123
Using pure stock 30d source with needed fixes to build
Light as possible
AutoPanel detection thanks @dr87
Bumped thanks @cybojenix
Install instructions:
You must be on stock LP rom with root and custom recovery installed and kitkat bootloader
Make a backup if something goes wrong so you can restore your device
Flash my kernel
Reboot your device and enjoy
Bugs:
You tell me i will add everything
Questions:
Feel free to ask anything related to my kernel here in thread I will answer you as fast as I can.
Downloads:
BCKernel1.0
BCKernel1.1
BCKernel2.0
BCKernel2.1
BCKernel2.2
Disclaimer:
Your warranty is now void. By installing my kernel you take all responsibility to hardware,software bricks so its not my fault if you don't read and do stupid things.
I test every my release on my own device before the official release so there is no big chance to brick your device if you follow instructions.
Thanks:
First of all HUGE thanks to my friend @duki994 for all the help great guy! without his help this would never be the same kernel.
@ferreirawax for his AWESOME guide!
HUGE thanks to @dorimanx for his fixes on the kernel source to build and boot properly and for everything else he is a kernel master.
@faux123
@bruce2728 for fixes
LGE for source
PS:
This is my first official kernel release so please be kind and tell me if I done something wrong I have no intentions to make someone mad or break the forum rules so I would really like some help and advices from YOU guys.
Source:
Kernel
Ramdisk
XDA:DevDB Information
BlueCyclonKernel, Kernel for the LG G2
Contributors
Boris31
Source Code: https://github.com/simex31/BC_Kernel_LP_STOCK_D802
Kernel Special Features:
Version Information
Status: Beta
Created 2015-04-17
Last Updated 2015-05-07
CHANGELOG:
18.4.2015 VERSION 1.1
Fixed exfat support
Merge some fixes from nexus5 caf
Selinux permissions fixes
Build using -o3 compiler flags
21.4.2015 VERSION 2.0
Exfat 1.2.4 from source
F2FS support thanks @neobuddy89
A lot of selinux fixes
A lot of new fixes from nexus5 caf
New custom build optimizations and flags
Optimization flags for GPU drivers
Added BFQ/SIO/FIOPS/ZEN/VR IO Schedulers and set CFQ as default
Set interactive governor as default
Deleted a lot of debugging and much more to come
Added Fsync enabled by default
Reduced minimum panel brightness for better reading at night
PM driver updates from Aurora 3.5
6.5.2015 VERSION 2.1
Compiled with UBERTC4.9
Added 3 new cpu governors INTELLIMM, INTELLIACTIVE, ALUCARD
Added GPU underclock and overclock to 650 max frequency.
A lot of gpu optimizations and new driver which should increase battery life and performances
Added MSM Hotplug which is enabled by default MPDecisions still run for other services but mp decision hotplug controls are disabled.
Full KCALv2 support by @savoca just download the app from here to use it.
Cpu optimizations which should increase battery life and performances
Added francisco fracno's light and clean Thermal driver and removed lg's
ZEN IO shed is set as default now
A lot of other patches from mainline kernel
Added Sweep2Sleep only enabled by default
Removed more useless debugging
Fixed potential memory leaks
And a lot more(check my git)
7.5.2015 VERSION 2.2
Bug fixes for gpu drivers
Bug fixes for gpu frequency now every freq works and sticks
Added voltage control be careful with uV not recommended more than -50
Rock stable
1 more
Thank good job
any support for fast charge?
Mastermind_hassan said:
any support for fast charge?
Click to expand...
Click to collapse
In plans for next release.
Any support for color control Mate?
Thank you , Can it use in ROM Port ?
Thanks @Boris31 for great kernel! I'm using it right now, It is faster than the stock one, a little bit, but it seems that's not quite battery friendly. What I want to say is that I'm truly satisfied, keep it up with great work!!! Hope next release will be soon
somboons said:
Thank you , Can it use in ROM Port ?
Click to expand...
Click to collapse
Yeah sure mate
Killy J. said:
Thanks @Boris31 for great kernel! I'm using it right now, It is faster than the stock one, a little bit, but it seems that's not quite battery friendly. What I want to say is that I'm truly satisfied, keep it up with great work!!! Hope next release will be soon
Click to expand...
Click to collapse
Thanks for kind words it really helps me a lot. I'm new to kernel development I learn new things everyday so optimizations and battery is my 1st thing to concentrate on.
@Boris31 ; Does this kernel works with CloudyG2 3.0 modified by @somboons ?
casual_kikoo said:
@Boris31 ; Does this kernel works with CloudyG2 3.0 modified by @somboons ?
Click to expand...
Click to collapse
Yes it should work please try and report back if you can. Thanks
Boris31 said:
Yes it should work please try and report back if you can. Thanks
Click to expand...
Click to collapse
Ok, thanks guy, I flash it and I'll report you!
Will this work on v30e and does it support fast charging?
Boris31 said:
Yes it should work please try and report back if you can. Thanks
Click to expand...
Click to collapse
Nope, it not works, bootloop after installation..
casual_kikoo said:
Nope, it not works, bootloop after installation..
Click to expand...
Click to collapse
Don't work.
casual_kikoo said:
Nope, it not works, bootloop after installation..
Click to expand...
Click to collapse
casual_kikoo said:
Ok, thanks guy, I flash it and I'll report you!
Click to expand...
Click to collapse
somboons said:
Don't work.
Click to expand...
Click to collapse
Well, cloudyg3 is based on f320 system so it's maybe because of that. I know that f320l/k/s on kitkat could boot with a d802 kernel but had problems like Fmradio etc.. i dont know why it does not work here so wait for cloudy to release it official or maybe I will try to find how fix it.
@somboons which kernel did you use in modded cloudyg3?
Boris31 said:
Well, cloudyg3 is based on f320 system so it's maybe because of that. I know that f320l/k/s on kitkat could boot with a d802 kernel but had problems like Fmradio etc.. i dont know why it does not work here so wait for cloudy to release it official or maybe I will try to find how fix it.
@somboons which kernel did you use in modded cloudyg3?
Click to expand...
Click to collapse
There is not my work maybe from VN. Base F320 .I have unpacked ramdisk I saw f320 in properties fils But I can't remember the name.
I think these kernel modify from f320 for D802.
somboons said:
There is not my work maybe from VN. Base F320 .I have unpacked ramdisk I saw f320 in properties fils But I can't remember the name.
I think these kernel modify from f320 for D802.
Click to expand...
Click to collapse
Yes that is the reason why it doesn't work it needs to be modified f320 ramdisk for d802 i think
Related
Andromeda Kernel
Supported: SM-N910F & SM-N910V
Do not try to flash this on ANY other variant than the N910F (Snapdragon, European)! It might work, but it can fail and end in a bootloop! Testers for SM-N910G wanted!
Disclaimer
Your warranty is now void.
We are not responsible if your phone will be damaged, broken, bootlooping or detonating in a thermonuclear reaction.
YOU are choosing to make these modifications and accept the fact that something might go wrong.
Click to expand...
Click to collapse
About me and Andromeda / Philosophy
Andromeda Kernel was created by a madman who tries to combine raw power, stability and batterylife in his high-tech laboratory home. IÄm not doing compromises and will always listen to every feedback and feature request!
Click to expand...
Click to collapse
Index
OP Post: About the kernel, basic changelog, Download, Credits
Post 2 : Changelog Preview + Development Status, FAQ
Post 3 : Known Issues, Fixes and Updates about pending fixes
Post 4 : Reserved for future use (Better safe than sorry, right? )
Features:
# Based on Samsung OpenSource Kernel XXU1BOB4
# SeLinux Permissive
# Linux version 3.10.40
# Overclocking and Underclocking (268mhz - 3,07Ghz)
# Governors: Intelliactive, Bluactive (more to come...)
# Compiled with GCC Linaro 4.9.3 Cortex A15 (03.2015) [/CENTER]
Click to expand...
Click to collapse
Changelog
Andromeda Stable 2.1
- Overclock and Underclock (268mhz - 3,07Ghz)
- Kernel NEON mode implemented
- Added KCAL Color Control (v2)(Controllable from KControl or this app: http://downloads.codefi.re/savoca/kcal)
- IntelliPlug is disabled for now (Great change, I know lol)
- Brandnew IntelliThermal from faux *yay*
Andromeda Stable 1.0
- FauxSound 3.6 fully integrated
- IntelliPlug 4.0
- Enhancements and battery optimizations
- Renamed the Kernel in the settings, the last one was a disaster http://forum.xda-developers.com/for...xda-developers.com/images/smilies/biggrin.gif
- 57% Support with KControl currently (Playstore App)
Andromeda Milestone 1.0.0 (Public Release)
- Based on BOB4 Stock kernel
- Added Bluactive and Intelliactive governors
- SeLinux Permissive (Try viper4Android, it's great!)
- Compiled with Linaro 4.9.3 Cortex A15
Click to expand...
Click to collapse
Please check Post Nr.2 for the list of features to be included!
Downloads:
Important: Do NOT make mirrors please! If you want one, please request it. Unofficial mirrors found will be reported, please respect this.
http://d-h.st/tNu1 (Stable 2.1)
Click to expand...
Click to collapse
How to Install
You have to have a custom recovery like TWRP, Philz or CWM installed.
- Download the kernel
- Reboot to recovery
- A backup is always recommended
- Flash the zip file
- You're done! Reboot and enjoy.
Credits:
Pafcholini - If it weren't for you, we'd be stuck at compiling or somewhere else. Massive Thanks for helping, guiding and having incredible patience with my incompetence
Psycho_666 - For boldly flashing what no one had flashed before and for continued support. Try SimpleRom it's an awesome ROM. And there's a new version to be launched soon, with a specially built SimpleKernel, derived from Andromeda
*To be updated in the future*
Rsroms- For being the most fearless Tester there is on the world, thanks for the massive help!
XDA:DevDB Information
AndromedaKernel, Kernel for the Samsung Galaxy Note 4
Contributors
mythos234
Source Code:https://gitlab.com/mythos234/AndromedaN910F-LL/
Kernel Special Features:
Version Information
Status: Abandoned
Current Stable Version: Stable 2.1
Stable Release Date: 2015-03-30
Beta Release Date: 2015-03-17
Created 2015-03-17
Last Updated 2015-05-08
Changelog Preview / FAQ
Changelog Preview
To be included in next build (Andromeda_Stable_V1)
# Synapse Support (Use Trickstermod Pro or Kcontrol for now)
# IntelliPlug 4.0 (make it work finally.. Sorry for the screwup)
# Voltage Control
# Support for the N910T (T-Mobile Variant)
#
# Enhancements and battery optimizations
Click to expand...
Click to collapse
Feature requests are always welcome and highly encouraged! Just as reviews and feedback
Benchmarks:
Just how fast is this kernel? Well, this should answer it:
Frequently asked Questions (FAQ)
Or Questions and answers, since this thread is new.
Q: Can this be flashed on the Exynos Note 4?
A: No, by no means. The Exynos model is completely incompatible, sorry.
Q: And what about other Snapdragon versions?
A: I can't advise to do that, it's untested and might not work. If you know how to handle bootloops and can remove my kernel if it doesn't boot, then you can always try it and tell me how it went. More variants would be awesome.
Q: Yikes, this kernel is too close to stock! What about more features?
A: More features will be included, please check the changelog preview. You can also request features and track the progress. I will make a section on this thread to display the feature request and write if I look at them, make them or - and that might happen - reject them.
- To be updated..
Known Issues / Fixes
Bootloop if you have Viper4Android installed and flashed Andromeda over it
Fix: Uninstall Viper, install Andromeda and then reinstall.
If this issue persists in my future builds, then I'll add an automated script to remove Viper4Android upon installation of the kernel.
Welcome Aboard Mate Good luck Stefan.
G is on kk how to test it. Kernel mentioned as 5.0.1
Sent from my SM-N910F using XDA Free mobile app
bhasg1007 said:
G is on kk how to test it. Kernel mentioned as 5.0.1
Sent from my SM-N910F using XDA Free mobile app
Click to expand...
Click to collapse
Still on kk? Samsung is slower than I thought lol... Thanks for letting me know, edited the thread. Probably better to try it when G receives official 5.0
Seems like a great Kernel, good luck buddy
Going to test on my n910t after work. Ktoonsez is the only booting kernel so far for TW5.0 but we have a data issue
Welcome thanks for the work: Bueno:
Hey stefan, great work, can i use it with simplrom, although i am happy with nadia
Rsroms said:
Hey stefan, great work, can i use it with simplrom, although i am happy with nadia
Click to expand...
Click to collapse
Hi, yes of course you can! We are actually working on deeper and more exclusive support for SimpleRom too. Stay tuned for version 2.1, it will be awesome
My kernel is much closer to the stock base, so you might get some more performance squeezed out - especially if you select Intelliactive as your governor - but at the cost of battery. I'm still not so big on features, the last couple of days my compiler decided to give me a hard time :crying:
Only 910F for now though!
this kernel is the best one for note 4 it is soo fast
nadia kernel not good lag soo much
rowihel2012 said:
this kernel is the best one for note 4 it is soo fast
nadia kernel not good lag soo much
Click to expand...
Click to collapse
same devs in this kernel like nadia , hahahahaha nadia kernel lag , boy, you need to read more before posting
ManDone.vRs said:
same devs in this kernel like nadia , hahahahaha nadia kernel lag , boy, you need to read more before posting
Click to expand...
Click to collapse
I'm not part of their Team, but Pafcholini is teaching me Don't worry, this kernel is not a clone of Nadia. My newest and upcoming build is as fluent as the last one and the batterylife is holding up a ton better too. No compromises on either side, thats my motto!
mythos234 said:
I'm not part of their Team, but Pafcholini is teaching me Don't worry, this kernel is not a clone of Nadia. My newest and upcoming build is as fluent as the last one and the batterylife is holding up a ton better too. No compromises on either side, thats my motto!
Click to expand...
Click to collapse
yeah stefan i know , but when i see a reply from unknow users and said : x kernel got lag , y kernel so bad , hey ! wake up ! need to read more than 1 week to know about a custom kernel Cheers compi .
ManDone.vRs said:
yeah stefan i know , but when i see a reply from unknow users and said : x kernel got lag , y kernel so bad , hey ! wake up ! need to read more than 1 week to know about a custom kernel Cheers compi .
Click to expand...
Click to collapse
Haha, I know what you mean I love the compliment, but I know as well as you do, that Nadia doesn't lag, unless the Synapse settings are set wrong. Too bad that my attempts at Synapse aren't going so great atm..
Hi, this kernel is compatible with BOC3 version, of Lollipop netherland??? Thank u
xxxfirenzexxx said:
Hi, this kernel is compatible with BOC3 version, of Lollipop netherland??? Thank u
Click to expand...
Click to collapse
This kernel is compatible with F version
xxxfirenzexxx said:
Hi, this kernel is compatible with BOC3 version, of Lollipop netherland??? Thank u
Click to expand...
Click to collapse
Yes, it is. I don't know what changes Sammy made to the BOC3 kernel yet, so mine might be a bit slower than the BOC3 stock one. But it works with the version just fine
Andromeda Stable 1.0 released!
Good evening everyone,
it took me a while, but I present you the first Stable build of Andromeda!
Changelog
- FauxSound 3.6 fully integrated
- IntelliPlug 4.0
- Enhancements and battery optimizations (mainly centered around powersuspend and adaptations to the default interactive governor)
- Renamed the Kernel in the settings, the last one was a disaster
- 57% Support with KControl currently (Playstore App)
Click to expand...
Click to collapse
About the Overclocking and Synapse...
I originally intended to include both in this build, but it will still need much more time and work and I didn't want to keep you away from the great upgrades I made in this version, so those two goodies will come later. I can highly recommend trying TricksterMod and KControl, both from the PlayStore.
And a very special announcement...
Perhaps the biggest change is that I recently joined "Team Simple - Simply Awesome" cool and will contribute an adapted version of the Andromeda kernel to SimpleRom, starting with the very close release of it's 2.1 Build. We planned something special - FauxSound is only the cherry on the Audiophile package inbuilt, so be very excited for whats coming up and be sure to try SimpleRom, especially the upcoming 2.1 version!
Oh, btw. I will also open a thread for the SimpleKernel once the Rom is released, to provide an optimized yet very close to stock experience! And there are also plans for an Exynos Build (the N910C), but I need some help with the Exy, so if anyone could lend me a hand, it would be highly appreciated! Now I understand why most devs settle for the Snapdragon..
Link to SimplRom: http://forum.xda-developers.com/note-4/snapdragon-dev/rom-simplrom-v1-t3004628
Download for Andromeda Stable 1.0:
http://d-h.st/TBO4
Click to expand...
Click to collapse
Disclaimer:
I and XDA are not liable in a broken and bricked devices, doing so, take a nandroid backup and be cautious. Do at your own risk.
Click to expand...
Click to collapse
Info:
This kernel is based from the last google commit "2e34ea8". I hadn't seen a custom kernel in G1 work in MM update. The phone is much good but sadly the development of custom stuffs are bit poor. So it drives me to create a custom kernel. I think the battery of stock kernel is good enough, but it also lacks something IMHO. So basically I only added few things in this kernel(also knowing that this is my first custom kernel that ever made). I had cherry pick the things I think it suits my taste.
Click to expand...
Click to collapse
Features:
KCal Color Changer
CPU Freq can be control
AutoSMP Driver
Intelli Plug Driver
Simple GPU Algorithm
ExFAT Support
PM Kernel Driver
FSync Control
SELinux Permissive Mode On
Fast charging
Frandom
Zpool
LCD Notifier
I/O Scheduler:
sio
bfq
fiops
Some tweak and add small features
Click to expand...
Click to collapse
PS: I am a beginner and newbie on this stuff and still learning.
Credits:
@arvinquilao , for the patience at guiding me in this stuff.
@savoca, @neobuddy89, @faux123, @itsmerajit, @varunchitre15, @sandymanu for some sources and learning
XDA:DevDB Information
Eon Kernel, Kernel for the OEM Cross Device Development
Contributors
PineappleOwl
Source Code: https://github.com/PineappleOwl/msm-seed/tree/eon6.0
Kernel Special Features: KCal Support, Fast Charging, Intelliplug
Version Information
Status: Beta
Created 2016-01-20
Last Updated 2016-02-12
Some stuffs
Download Link:
eon-seed-1.0_boot
eon-seed-alpha_boot
Click to expand...
Click to collapse
Changelog:
February 12, 2016 [1.0]
Code:
Remove AutoSMP
Initial Port of Fast Charging
Add Frandom
Add Zpool
Add LCD Notifier
January 2016[ALPHA]
Code:
KCal Color Changer
CPU Freq can be control
AutoSMP Driver
Intelli Plug Driver
Simple GPU Algorithm
ExFAT Support
PM Kernel Driver
FSync Control
SELinux Permissive Mode On
I/O Scheduler:
sio
bfq
fiops
Some tweak and add small features
Just like flashing a normal boot.img
Go to bootloader, then
fastboot flash boot nameofboot.img
Click to expand...
Click to collapse
Also work with chainfire systemless root!
Or we can just flash it with an app like rashr if rooted
hyperay said:
Or we can just flash it with an app like rashr if rooted
Click to expand...
Click to collapse
Maybe flashify too
PineappleOwl said:
Maybe flashify too
Click to expand...
Click to collapse
I'm rashr user so I used that as example
are you will come Double tap wake up? Commintment on github page.
kaankulahli said:
are you will come Double tap wake up? Commintment on github page.
Click to expand...
Click to collapse
Dont know yet, but I tried working and researching on it for week but nothing happened.
I even check the source of Yuphoria's custom kernel and I hadn't see it working on Marshmallow.
Also I checked the Lenno Kernel from Moto E, it had DT2W but not working on us.
How's the SoT so far? I'm getting roughly 10minutes = 1% battery drain on my Cherry Mobile G1 with intersectRaven's kernel. I want to try this out if it's better in terms of battery life.
Flashing.... Thanks
Very impressive kernel dude! But here's some issues:
All 4 cores scaled at max freq
No sim after systemless root
But hey, I viberated colors and increased contrast. Screen looks amazing very big thanks!!!!
nhmanas said:
Very impressive kernel dude! But here's some issues:
All 4 cores scaled at max freq
No sim after systemless root
But hey, I viberated colors and increased contrast. Screen looks amazing very big thanks!!!!
Click to expand...
Click to collapse
Then I'll make the default value , a not-so-max freq. sir
The sim? Hmm Im pretty sure it is working. Currently, I have no problem with the sim sir
PineappleOwl said:
Then I'll make the default value , a not-so-max freq. sir
The sim? Hmm Im pretty sure it is working. Currently, I have no problem with the sim sir
Click to expand...
Click to collapse
Thank you for reply.
But I'm pretty sure sim isn't detected on your kernel. It got back when I flash stock kernel again
PS: This problem occurred after I flash systemless root. It was normal before root
Tengri biz menen
Help, i flashed the kernel but how did you improve the screen color? I downloaded KCAL color changer but I get an "Unfortunately, Color Changer has stopped." When I move 1 slider.. Does this require root?
nhmanas said:
Thank you for reply.
But I'm pretty sure sim isn't detected on your kernel. It got back when I flash stock kernel again
PS: This problem occurred after I flash systemless root. It was normal before root
Tengri biz menen
Click to expand...
Click to collapse
Does the stock rom have a conflict with it too, the systemless root?
Janjako16 said:
Help, i flashed the kernel but how did you improve the screen color? I downloaded KCAL color changer but I get an "Unfortunately, Color Changer has stopped." When I move 1 slider.. Does this require root?
Click to expand...
Click to collapse
Yes , it needs root permission sir.
PineappleOwl said:
Disclaimer:
Info:
Features:
Download Link:
PS: I am a beginner and newbie on this stuff and still learning.
Credits:
@arvinquilao , for the patience at guiding me in this stuff. @savoca, @neobuddy89, @faux123, @itsmerajit, @varunchitre15, @Sandymanu for some sources and learning
XDA:DevDB Information
Eon Kernel, Kernel for the OEM Cross Device Development
Contributors
PineappleOwl
Source Code: https://github.com/PineappleOwl/msm-seed/tree/eon6.0
Kernel Special Features: KCal Support
Version Information
Status: Alpha
Created 2016-01-20
Last Updated 2016-01-20
Click to expand...
Click to collapse
Does this kernel support FM Radio?
Is this kernel will be updated? I really like this one!
BronzieSmurf said:
Does this kernel support FM Radio?
Click to expand...
Click to collapse
Its stock based sir so the FM Radio is working fine
nhmanas said:
Is this kernel will be updated? I really like this one!
Click to expand...
Click to collapse
Yes sir. I will.
Can I flash this on CM13?
wow. finally! an intelliplug driver. thanks!
thanks
ill try this one
Dirty Unicorns 6.0.1 is probably the best marshmallow rom for amami so far , although it has some problems: camera app cannot take pictures at 20.7mp, and exfat-formated sdcard is not supported.
So I made a kernel to fix these problems. You can flash with twrp or flashfire.
Kernel_Amami_AOSP_6_20160709.zip contains aosp kernel built with exfat-nofuse and some other features, as well as other executables or libraries needed to identify and mount exfat(vold , blkid etc.) This may work with other aosp 6.0.1 based roms, but I never tried by myself.
2016.06.18 : I ported some features from other kernels like M5 kernel. Features included:
1. Various cpufreq governors, hotplug drivers and i/o schedulers
2. KCAL color control by @savoca
3. Faux Sound Control V3
4. CPU/GPU OC & UV
5. Vibrator intensity control
6. Ultra-ksm
7. Kexec-hardboot
8. Dynamic Fsync 1.2
9. Mac80211 injection patch and HID patch for keyboard support
10. Sysfs interface to Enable / Disable CRC on the data blocks
11. Exfat and Paragon NTFS(UFSD)
12. Zram
13. Merge upstream patches up to 3.10.102
MtkCamera.zip contains camera app from Mediatek devices with lollipop. It can take 20.7mp photos(3936 x 5248) and has some useful features like visual effects and qrcode scanner.
Modified kernel source : https://github.com/KuronekoDungeon/android_kernel_sony_msm
Download : https://drive.google.com/folderview?id=0B-DoK6BdpB2fZEZ5eG5NcnhYNFU&usp=sharing
If you're interested, Myself5 is willing to release M5 for Amami, but needs a maintainer, since he doesn't have a Z1c anymore. Maybe you can work with him on M5 for AOSP...
levone1 said:
If you're interested, Myself5 is willing to release M5 for Amami, but needs a maintainer, since he doesn't have a Z1c anymore. Maybe you can work with him on M5 for AOSP...
Click to expand...
Click to collapse
Is he working on a 3.10.9x kernel ?
maz-1 said:
Is he working on a 3.10.9x kernel ?
Click to expand...
Click to collapse
This is from main thread latest version...
levone1 said:
This is from main thread latest version...
Click to expand...
Click to collapse
cool, I guess I will be a tester then.
maz-1 said:
cool, I guess I will be a tester then.
Click to expand...
Click to collapse
He did say that testers won't really help. Without a device of his own, he'll need a maintainer.
levone1 said:
He did say that testers won't really help. Without a device of his own, he'll need a maintainer.
Click to expand...
Click to collapse
Well, I mean I will build, test and submit fixes if possible. But I'm afraid I don't have the time and knowledge to take over all the maintenance. Any other volunteers?
maz-1 said:
Well, I mean I will build, test and submit fixes if possible. But I'm afraid I don't have the time and knowledge to take over all the maintenance. Any other volunteers?
Click to expand...
Click to collapse
maybe we can jointly maintain ?
CLINTZ9 said:
maybe we can jointly maintain ?
Click to expand...
Click to collapse
Sounds good.
maz-1 said:
Sounds good.
Click to expand...
Click to collapse
cool !
CLINTZ9 said:
cool !
Click to expand...
Click to collapse
I've already ported a bunch of features to aosp kernel, just check out the commit history.
What left to be done : GPU governors, A few hotplug drivers/cpufreq governors not ported(hotplug : alucard , mako , intelliplug , cpufreq : HYPER, OndemandPlus, Nightmare , ElementalX, maybe more) , some of these features need to be modifeid or abandoned.
maz-1 said:
I've already ported a bunch of features to aosp kernel, just check out the commit history.
What left to be done : GPU governors, A few hotplug drivers/cpufreq governors not ported(hotplug : alucard , mako , intelliplug , cpufreq : HYPER, OndemandPlus, Nightmare , ElementalX, maybe more) , some of these features need to be modifeid or abandoned.
Click to expand...
Click to collapse
Hi, I install this, work well, but camera still laggy . What do you think, how else you can improve the image processing? The picture was much too sharp ... but it's better than before.
And...you can also add in your kernel any functions like as KryptonianKernel or AdvancedKernel
John.D.. said:
Hi, I install this, work well, but camera still laggy . What do you think, how else you can improve the image processing? The picture was much too sharp ... but it's better than before.
And...you can also add in your kernel any functions like as KryptonianKernel or AdvancedKernel
Click to expand...
Click to collapse
Laggy camera is a driver issue, just wait until sony updates software binaries for amami.
Hmm, why you delete MTKCamera? You have another app for taking photo in 21mp?)
MTKCamera cannot use frontcam. I think @SpiritCroc will try to add 20.7mp option to SnapdragonCamera, so wait for a new release.
maz-1 said:
MTKCamera cannot use frontcam. I think @SpiritCroc will try to add 20.7mp option to SnapdragonCamera, so wait for a new release.
Click to expand...
Click to collapse
I already added it, will probably be in next weekly
maz-1 said:
I've already ported a bunch of features to aosp kernel, just check out the commit history.
What left to be done : GPU governors, A few hotplug drivers/cpufreq governors not ported(hotplug : alucard , mako , intelliplug , cpufreq : HYPER, OndemandPlus, Nightmare , ElementalX, maybe more) , some of these features need to be modifeid or abandoned.
Click to expand...
Click to collapse
check your whatsapp inbox
What's 'jhead exif fix' file in your Gdrive link?
levone1 said:
What's 'jhead exif fix' file in your Gdrive link?
Click to expand...
Click to collapse
libjhead with this patch :
https://gist.github.com/updateing/2b58ebd4a8c75780443f28f514e9bb39
Photos token by Android N may contain wrong exif infomation and cause app crash on marshmallow/lollipop.
need help - CPU GOVs and frequencies
Hi,
first of all thanks for the kernel! I'm just migrated from RR Lollipop to MM DU ROM (today to the build of 17. June). I have strange issues with the kernel.
I can not change the CPU govs. More critical: The minimum CPU frequency is shown to be 1.8 GHz. Whatever I try, I cannot get the values gov/freq to stick.
Always when I reopen an tuning app, the settings are reverted.
Root seems to work fine. Also tried to disable SE-linux via terminal ("setenforce 0"). The same.
(Combinations I tried: kernel audiutor, performance control, system tuner... also on DU (3. june) + kernel (5. june)
Can somebody help me out?
Who can permanently adjust the CPU settings on DU with/without this kernel?
Thanks in advance!
Hi oneplus2 people!
This is my modified kernel with some kernel optimizations and some compiler optimizations.
The goal of abyss is to achieve improved performance/battery without the cost of stability.
I will not be overhauling this project with changes that are not logical to add.
This kernel should work on the latest 7.x.x roms like CyanogenMod.
It might work on other roms, but there will be little support for them.
How does one achieve this?
- build kernel with an optimized toolchain
- use compiler optimization flags (experimental)
- remove redundant code
- improve existing code with more efficient code
- etc. (most are not so easy to explain)
This kernel is built with mdalexca's latest UBER GCC 4.9.
Is there actually a performance improvement?
With all the changes added up, there should be. Whether or not one notices the difference is another thing.
For those interested in how the kernel optimizations will benefit/work, please look at my github source and read the commit messages.
For those interested in how the compiler optimizations/hacks will benefit/work, please look at this article.
Downloads:
Latest release
BasketBuild
Source:
GitHub
This was made by request from dsst22 who also tested this bad boi like crazy.
XDA:DevDB Information
abyss kernel for the OnePlus 2, Kernel for the OnePlus 2
Contributors
kwoktopus, dsst22, OnePlus, grarak, The Flash, arter97, Lord Boeffla, frap129, Linux, Google, CAF, a bunch of other major OEMs
Source Code: https://github.com/abyss-kernels/oneplus2
Kernel Special Features:
Version Information
Status: Nightly
Current Stable Version: 1.20
Stable Release Date: 2016-12-05
Created 2016-12-05
Last Updated 2016-12-13
Key Changes:
- upstream interactive governor (with Flash 1.0 profile by The Flash) (Google and CAF)
- upstream cpufreq driver (Google and CAF)
- upstream cpu-boost driver (Google and CAF)
- upstream random driver from Linux 4.1.31 (performance..!)
- slub/slab/slob/vmalloc patches
- flar2's slightly modified thermal driver
- using Linaro's power efficient workqueues throughout kernel
- using Adreno idler by arter97 to reduce frequency scaling without performance cost
- using power efficient "relaxed" macros throughout kernel (assembler)
- KCAL Control Driver by Savoca
- Android-Keyboard patch, use your device as an external keyboard!
- too many to list here, check out my source
How to install:
Place zip in to your internal storage
Place current ROM zip on to your storage
Boot into TWRP recovery
(If you're coming from a different kernel, dirty flash current ROM)
Flash kernel zip
Reboot
Don't like the defaults?
Use Kernel Adiutor to change the settings!
Frequently Asked Questions:
Is this a custom kernel?
I was asked this question once, and it posed as a real good question. I do not consider abyss to be a "custom kernel" per se, but more so as a modified kernel. The patches and features that go into this kernel do not make it customizable. What they do is improve what has already been implemented. It is like swapping a car's engine for a better one rather than just adding LED flooring lights and fancy car mats.
Can you add [this] and [that] feature?
Something I pride myself with this kernel is that it does not have a bunch of random, useless features or patches mashed into it. Everything put into this kernel is thought out and tested. I see a lot of works being made popular because it has [this] and [that] feature when really, it's nothing revolutionary. As a matter of fact, most things added to any kernel will not make it 5x better than any other kernel. Most of the time, simple is better; and in this case it definitely is!
For me
Thanks! I'll give it a go.
Giving it a go
Yess! Been waiting for this ever since i saw your OP2 repo!
Does this kernel install on a f2fs formatted system?
suraj.das said:
Yess! Been waiting for this ever since i saw your OP2 repo!
Click to expand...
Click to collapse
You can thank @dsst22 for helping with testing, or else you would have waited a very long time :silly:
socialdistortion said:
Does this kernel install on a f2fs formatted system?
Click to expand...
Click to collapse
I have not made any file system changes to the kernel. If the stock CM kernel supports, then this one will too.
Is kcal support present..??
chl1810 said:
Is kcal support present..??
Click to expand...
Click to collapse
unfortunately no.
good to see new kernel for our device, thanks and good luck
suraj.das said:
unfortunately no.
Click to expand...
Click to collapse
I wish it had
chl1810 said:
I wish it had
Click to expand...
Click to collapse
I can remember the YoshiShaPow falcon kernel
chl1810 said:
I wish it had
Click to expand...
Click to collapse
In the future
PeterImmel said:
I can remember the YoshiShaPow falcon kernel
Click to expand...
Click to collapse
You can probably see how much I've grown as a developer since then too :angel:
Works on a f2fs filesystem based rom. Testing it now...
Edit: No obvious bugs at the moment. Is it possible to implement some sort of charging control. The USB charging speed is super slow (on both this kernel and stock CM kernel).
kwoktopus said:
In the future
Click to expand...
Click to collapse
Nice!! thank you!!
Pretty smooth haven't found any bugs. Love the simplicity.
I can't imagine what it would be like with a little over clock.
adame09 said:
Pretty smooth haven't found any bugs. Love the simplicity.
I can't imagine what it would be like with a little over clock.
Click to expand...
Click to collapse
I trust the engineers that designed the chip to choose a safe maximum clock speed. Here's a pretty good article on the risks vs benefits, which outline some strong points.
But, if I were to add it, I would set the max value at boot to stay as stock values; so I'll leave it up to @dsst22 to decide.
I'll try this out for you dude. Impressive what you've done.
Features:
1.PUBG Runs Smoothly:laugh:
2.GPU Overclocked To 710mhz
3.CPU Overclocked To 2.3ghz BIG & 1.8gz SMALL cores
4.ZEN Io
5.Intellithermal
6.Westwood TCP Algorithm
7.Simplified Thermal Configuration
I Also Modified Its Thermal Properties To Make It Run Cooler On Our Device:laugh:
All Work Is Based On Void 5.4 Kernel For Z2 pro by @void23
Many many thanks to @void23 for the original development
Full Details About The Kernel Can Be Found In The Void Kernel Thread Given Below
https://forum.xda-developers.com/zu...kernel-z2-pro-kernel-gpu-oc-zen-f2fs-t3661822
Note:
As Its Overclocked So Battery Life May Be Lower If You Want More Battery Life Then Use An App Like Kernel Auditor To Underclock The Frequency To 2.15ghz BIG, 1.6ghz LITTLE & 624mhz for GPU
Also Let The Kernel Settle For A Couple Of Days Before Posing Any Issues
Recommended To Be Used With This Thermal Mod To Prevent Overheating
https://forum.xda-developers.com/lenovo-zuk-z2/themes/treble-treble-ubercool-thermal-mod-t3784947
Hit Thanks If You Loved It
Download Link(Treble)
https://drive.google.com/file/d/1wHYQbw2ttTYQSzmlgJN23PvePWH9wvZS/view?usp=drivesdk
Sources
https://github.com/virtvoid/android_kernel_zuk_msm8996-1
https://github.com/virtvoid/android_kernel_zuk_msm8996-5
treble？
boluoot said:
treble？
Click to expand...
Click to collapse
Treble Only
thx
AstroBiswas said:
Treble Only
Click to expand...
Click to collapse
Make it for non treble also !!
make one for non treble
Please add a sound control
What's the Linux Kernel Version? 5.4 or 3.18.x?
1a2b257 said:
What's the Linux Kernel Version? 5.4 or 3.18.x?
Click to expand...
Click to collapse
3.18
Nice,
but add Credits to the Void Kernel guy and his original Credit list also and also while you post a Kernel in XDA you should put Kernel Source link that you have used else it is against XDA rules.
With Regards
KuberSharma
Nice work
kashyapp said:
Make it for non treble also !!
Click to expand...
Click to collapse
zakaria12 said:
make one for non treble
Click to expand...
Click to collapse
It Has Been Worked Upon But Is Untested Do Comment Your Review After Installation
Non-Treble Version Released With Some Changes
-upstreamed to .107
-added zen IO scheduler
-updated some governers
-new thermals
-and some more stuff
Download Link Given In Op
Initial Installers Do Comment How Does It Work. I Have A Treble Rom So Its Untested By Me
AstroBiswas said:
Non-Treble Version Released With Some Changes
-Sound gain fixed
-Upstreamed to .107
-added zen IO scheduler
-added CAF active governer
-updated some governers
-new thermals
-and some more stuff
Initial Installers Do Comment How Does It Work. I Have A Treble Rom So Its Untested By Me
Click to expand...
Click to collapse
new trees or old trees ?
thehumanx said:
new trees or old trees ?
Click to expand...
Click to collapse
New Trees
Wtaf
Kanged bfr 3.6 changelog.
So it's a renamed bfr? And reuploaded?
??
amog787 said:
Wtaf
Kanged bfr 3.6 changelog.
So it's a renamed bfr? And reuploaded?
Click to expand...
Click to collapse
Its Based On Void Not Bfr
i am unable to flash the non treble zip files.
error occured.
locolyric said:
i am unable to flash the non treble zip files.
error occured.
Click to expand...
Click to collapse
Send the screenshot of twrp showing error