Related
Hello everyone, before I say anything I want to apologize in advance if this is the wrong area of the forums for me to be posting this, but I'm kind of in a rush so I thought I'd ask some pro's 'cus I can't figure out what i'm doing wrong. Anyway..
I just got my Samsung Epic replaced because it was screwing up, and I came home today and tried rooting it. I actually just got finished spending almost two hours trying to find out where I was going wrong, but came up with nothing. I downloaded the samsung drivers 32 bit for this hp mini lap top and installed them. I got the one click root exploit, extracted etc... So I run the exploit and when it says waiting for my phone to reconnect, it waits 60 seconds and says root could not be obtained after 60 seconds, make sure your phone is connected and try again if adb shell isn't root, reboot phone and run the script again or something like that. No matter what I do it ends up saying that my phone isn't connected but on my phone it clearly says that the usb is connected.
I don't know if this is common or not, but any help would be greatly appreciated.
swiftstrike763 said:
Hello everyone, before I say anything I want to apologize in advance if this is the wrong area of the forums for me to be posting this, but I'm kind of in a rush so I thought I'd ask some pro's 'cus I can't figure out what i'm doing wrong. Anyway..
I just got my Samsung Epic replaced because it was screwing up, and I came home today and tried rooting it. I actually just got finished spending almost two hours trying to find out where I was going wrong, but came up with nothing. I downloaded the samsung drivers 32 bit for this hp mini lap top and installed them. I got the one click root exploit, extracted etc... So I run the exploit and when it says waiting for my phone to reconnect, it waits 60 seconds and says root could not be obtained after 60 seconds, make sure your phone is connected and try again if adb shell isn't root, reboot phone and run the script again or something like that. No matter what I do it ends up saying that my phone isn't connected but on my phone it clearly says that the usb is connected.
I don't know if this is common or not, but any help would be greatly appreciated.
Click to expand...
Click to collapse
I'm assuming your phone is on 2.3.5 gingerbread so oneclickroot doesn't work. You'll need to odin in a custom kernel and then odin in a custom recovery ie. Clockwork Mod or Acs Recovery. Once that's done just flash a custom Rom or just flash a superuser.zip. if you don't know how to do this search qbking on youtube best tutorials around.
http://www.youtube.com/watch?v=kwFRzzIqouE&feature=youtube_gdata_player
Sent From My Cyan Katana
Do you have USB Debugging checked?
blakklanta said:
Do you have USB Debugging checked?
Click to expand...
Click to collapse
That wouldn't help he's on ei22 software and exploits don't work. Anways OP did you get it done?
Sent From My Cyan Katana
bigg is right. your most likely running 2.3.5.
here is step on video http://www.youtube.com/watch?v=kwFRzzIqouE&feature=results_main&playnext=1&list=PL80A083B9C1DFB5D5
this will take you through the rest of the process
hi
i hard bricked my lg 930
how ?
i followed this step
http://www.androidauthority.com/lg-nitro-hd-clockworkmod-cwm-recovery-48447/
(do not follow)
i tried install ClockworkMod (CWM) since i installed the koereean rom and (no wi-fi to install tru rom manager)
is anything i can do for my phone like i'm not able to go in download mode, i can't see anything on screen. black
while i connect the usb cable i can hear a sound like connecting to computer
thanks a lot
We would need some more information to know if your phone is truly bricked.
does your device show up via ADB?
does it show up with B2CAppSetup program?
have you followed the unbricking solution?
http://forum.xda-developers.com/showthread.php?t=1597488
an important part of getting the phone into download mode is unplugging the usb at the right time during a hard reboot with the volume up held.
hope any of this helps but hopefully we will hear back with more info.
Maverick.Marq said:
We would need some more information to know if your phone is truly bricked.
does your device show up via ADB?
does it show up with B2CAppSetup program?
have you followed the unbricking solution?
http://forum.xda-developers.com/showthread.php?t=1597488
an important part of getting the phone into download mode is unplugging the usb at the right time during a hard reboot with the volume up held.
hope any of this helps but hopefully we will hear back with more info.
Click to expand...
Click to collapse
first of all thanks for response
no, it doesn't show up in adb (use command adb devices)
i can hear only the sound from computer (exactly like you connect true usb cable) but nothing on screen
yes, i tried the steps but ask to connect the phone, no usb connecting
@Maverick.Marq,
No, we don't really need more info to know his phone is hosed. Basically he has flashed a supposed CWM image on top of one of the bootloader partitions instead of the recovery partition. Everyone should contact these guys and tell them their guide is horribly, horribly wrong. They never responded to my email...but maybe if more people contact them about it, they'll remove their stupid guide.
Sent from my LG-P930 using Tapatalk 2
Malnilion said:
@Maverick.Marq,
No, we don't really need more info to know his phone is hosed. Basically he has flashed a supposed CWM image on top of one of the bootloader partitions instead of the recovery partition. Everyone should contact these guys and tell them their guide is horribly, horribly wrong. They never responded to my email...but maybe if more people contact them about it, they'll remove their stupid guide.
Sent from my LG-P930 using Tapatalk 2
Click to expand...
Click to collapse
thanks
anything i can do for my phone?
some update
some update
i have 2 computers
to the first one i never installed phone drivers other then lg drivers
1- in device manager with the phone conected (without or with battery) it's show "QHSUSB_DLOAD" with exclamation , see attachment
error 2 device manager lg p930 nitro.jpg
error device manager driver lg p930.jpg
2 - in USBVIEW20.exe when i open (phone still conected) i have this error (see attachment "error in usb view.jpg" and "usb view qualcomn.jpg")
some udate 2
in second computer i had many phone drivers like sony xperia play, htc evo 3d or htc desire
it's show zeus flash device with exclamation and now QHSUSB_DLOAD like the other computer - see " error desktop device manager zeus flash device"
i made 2 posts because i can't upload more then 4 images
i think to force to take driver for QHSUSB_DLOAD but how can i do that because i tried with propietes, update driver and don't want to take " android_winusb.inf" from lg drivers
i found in adb/adroid-sdk/extras/google a file android_winusb.inf and i have 3 choises (of course, i try to force to take the drivers,)
sorry for my english
if is some developer i can give access to my computer by remote
any ideas
thanks
update
i tried to burn the recovery image with nero and i have a error size
maybe this was the problem, the recovery image was incomplete?
nickmatine said:
i tried to burn the recovery image with nero and i have a error size
maybe this was the problem, the recovery image was incomplete?
Click to expand...
Click to collapse
LOL, I have no idea why you're trying to use Nero, but yes you are correct -- recovery images should be 16MB (16777216 bytes).
That's not the issue though. The issue is that you flashed something to the mmcblk0p6 partition, which is bad.
drumist said:
LOL, I have no idea why you're trying to use Nero, but yes you are correct -- recovery images should be 16MB (16777216 bytes).
That's not the issue though. The issue is that you flashed something to the mmcblk0p6 partition, which is bad.
Click to expand...
Click to collapse
i used nero just to see if is some error
mmcblk0p6 partition it's the bootloader partition?
Hi
Hi Nickmatine,
Could you please confirm if your phone (LG P930) got unbricked?
Regards
@allians2002,
Unless he sent it in to be hardware-flashed, it's probably pretty much hosed.
I think I have the same problem
http://forum.xda-developers.com/showthread.php?t=1569514
There is nothing you can do. I will sell mine, or if someone need a new screen or something, just so damn unlucky...
allians2002 said:
Hi Nickmatine,
Could you please confirm if your phone (LG P930) got unbricked?
Regards
Click to expand...
Click to collapse
not yet, but not abandoned the project
i think know where to solder wires to hard flash but it's a very small connector. Maybe 7-8 hours just to solder the wires. If someone know where can i buy the cable for this connector i can help you and other people
nickmatine said:
not yet, but not abandoned the project
i think know where to solder wires to hard flash but it's a very small connector. Maybe 7-8 hours just to solder the wires. If someone know where can i buy the cable for this connector i can help you and other people
Click to expand...
Click to collapse
i also have exactly the same problem. after unbricking . and coming to korean firmware i tried putting at&t firmware images and in the last step. it gave me an error "less in memory " for system.img.
the battery was at 2% when i did that. since then the screen wont light up.
i am trying to see if i can charge the battery with an external charger and then put back to phone and try if it boots.. i am pretty sad about it ..
i'll buy a jtag box next week and i'll let you know
or maybe someone know without jtag like this for optimus p930
http://forum.xda-developers.com/showthread.php?p=25501047
nickmatine said:
i'll buy a jtag box next week and i'll let you know
or maybe someone know without jtag like this for optimus p930
http://forum.xda-developers.com/showthread.php?p=25501047
Click to expand...
Click to collapse
i have given my phone for repair to nearby mobile repair shop. i have a very little hope from them .. which means its bricked
hem.acharya said:
i have given my phone for repair to nearby mobile repair shop. i have a very little hope from them .. which means its bricked
Click to expand...
Click to collapse
please tell as what happened
I'll let you next week after buy medusa box
finally, i bought the medusa box but i messed up my motherboard. Why?
In the schematic diagram for Jtag they give me the wrong pins (in mirror). Beacuse i tried many times with wrong configuration my motherboard died. After that i removed the JTAG conector and i so the wrong schematic
now,i still try to fix a lg p 930 so if anybody have a hard bricked phone for sell send a messege
Sorry for my english
SOLVED
greeting
After 6 months I'm back with feedback. I was Able to fix my LG P930 with Medusa box. Meanwhile I bought a professional microscope, Octopus Box, Z3X box and Riff box, so now i fix phones by JTAG. I managed to fix my P930 so is alive again after 6 months
Hi there! First of all I don't speak english very well.
My Galaxy Nexus hard bricked yesterday.
tl;dr no boot animation, no recovery mode, no download mode, no response from computer.
I thought it had just a low battery level, I found it turned off. So I tried to recharge it but it gave no signals, no battery icon, nothing.
After an all night long recharge I tried to turn it on, to enter in download mode or in recovery mode but nothing works. I also tried to connect it with my computer with and without battery, no response, no "OMAP" device found, no sound from Windows for plugging it in, nothing.
I found this thread here in xda, many people has been redirected to it and found their solution to the brick problem.
I tried to follow all the steps but when I plug in the phone and start the .bat file nothing happens, just stuck on "Waiting for device".
The phone is unlocked and rooted. I'm running AOKP JB-MR1 Build 2 and Franco Kernel for a month, never had problems with them, never installed other ROMs after that.
What should I do now? Should I try to do something or just bring it to a support center? The phone is still in warranty, there would be any problem because it has a non-stock ROM?
I've red about a jig to force the Odin mode, should I buy it? (I found this one)
Thanks for the help.
Have you tried booting into Odin mode
ntb81 said:
Have you tried booting into Odin mode
Click to expand...
Click to collapse
Yes, it doesn't work.
have you your warranty on it?
return it and get a new one
It's hard bricked and a JTAG unit may force it into download mode, if you send it in for warranty, chances are it won't be accepted as it was obviously tampered with and they would find out that your bootloader is unlocked and charge you more money than the device is actually worth to fix it.
I don't understand how it could of bricked if nothing has changed on the phone for a month or longer. Nothing was flashed recently so how can you hard brick the phone?
Beauenheim said:
It's hard bricked and a JTAG unit may force it into download mode, if you send it in for warranty, chances are it won't be accepted as it was obviously tampered with and they would find out that your bootloader is unlocked and charge you more money than the device is actually worth to fix it.
Click to expand...
Click to collapse
Yeah, that's why I'm not sure to send it in for warranty. So have I to try with a JTAG first?
[bman123] said:
I don't understand how it could of bricked if nothing has changed on the phone for a month or longer. Nothing was flashed recently so how can you hard brick the phone?
Click to expand...
Click to collapse
I'm not understanding that too, I don't know what happened. Suddendly it stopped working. Maybe is just a battery problem, I'll try to use another one before bringing it to the shop where I bought it.
same happened to me, but I have an untouched phone with stock android. it worked well for over an year until today.
I see a lot of people having same issue, but they say that when connected to PC over USB the phone is recognized as OMAP.
for me the PC doesn't do anything...
any help? thanks
---------- Post added at 06:12 AM ---------- Previous post was at 06:02 AM ----------
galiganu said:
same happened to me, but I have an untouched phone with stock android. it worked well for over an year until today.
I see a lot of people having same issue, but they say that when connected to PC over USB the phone is recognized as OMAP.
for me the PC doesn't do anything...
any help? thanks
Click to expand...
Click to collapse
so right after I wrote that I plugged my phone into USB of my PC without battery. when I inserted the battery it started showing me the battery sign and I could started the phone. 3 minutes later it went black again, but the trick didnt work again.
any ideas? thanks
Try This !!
Arrange a 4 ohm resistor and try to attach it in ur usb plug port of phone ..it 'll force the phon eto go in download mode or say Fastboot mode.
then follow a tutorial to flash any rom..
its quite easy else ping me !!
Tech.Nik said:
Arrange a 4 ohm resistor and try to attach it in ur usb plug port of phone ..it 'll force the phon eto go in download mode or say Fastboot mode.
then follow a tutorial to flash any rom..
its quite easy else ping me !!
Click to expand...
Click to collapse
Please could you explain a bit more how to go about this? I have a Verizon Galaxy Nexus in a somewhat similar condition. This one is recognised as an OMAP 4430 device. I downloaded OMAP Flasher, installed drivers and tried to bring it back to life but after running the batch file I get this error: Operation FAILED (Remote: : Driver init error 0x00FF8080 - MMC CONFIG FAILURE). Can the resistor trick work on this and if yes, how can I go about it? I am not faint-hearted; I think I can handle it if given the right instructions.
After I tried everything i could from the internet, I went to a shop and tested to see if the USB is broken - and indeed it was. I replaced the USB component of the phone and after that it started.
Thanks guys
galiganu said:
After I tried everything i could from the internet, I went to a shop and tested to see if the USB is broken - and indeed it was. I replaced the USB component of the phone and after that it started.
Thanks guys
Click to expand...
Click to collapse
Yeah, the faulty USB port is a very common issue.
I received an SGH-T989 that wouldn't boot. It had TWRP on it, so I was able to flash latest stable CWM. Upon reboot, it apparently became hard-bricked.
Currently, I'm unable to enter download or recovery modes. USB Jig does not work. There is no output on the screen, even when charging the battery. When connected in Windows (32 or 64), I get a usb error message: "This device is disabled because the firmware of the device did not give it the required resources. (Code 29)"
My question: Is the motherboard dead, or could a jtag repair fix it?
What I've tried:
multiple micro usb cables
usb jig
odin
keis
heimdall
Thanks xda!
Dostoevsky said:
I received an SGH-T989 that wouldn't boot. It had TWRP on it, so I was able to flash latest stable CWM. Upon reboot, it apparently became hard-bricked.
Currently, I'm unable to enter download or recovery modes. USB Jig does not work. There is no output on the screen, even when charging the battery. When connected in Windows (32 or 64), I get a usb error message: "This device is disabled because the firmware of the device did not give it the required resources. (Code 29)"
My question: Is the motherboard dead, or could a jtag repair fix it?
What I've tried:
multiple micro usb cables
usb jig
odin
keis
heimdall
Thanks xda!
Click to expand...
Click to collapse
so the qhsusb_dload does not apear when your device is plugged into the computer? if so please hold on a little longer, somebody found a method of unhard bricking S3's and eventually Note 3's and the galaxy megas and im getting closer to being able to do this aswell im going to try to fix mine when i get home so hold on
Trozzul said:
so the qhsusb_dload does not apear when your device is plugged into the computer? if so please hold on a little longer, somebody found a method of unhard bricking S3's and eventually Note 3's and the galaxy megas and im getting closer to being able to do this aswell im going to try to fix mine when i get home so hold on
Click to expand...
Click to collapse
That would be great! I did see the S3 fix that loads a debrick.img from sdcard - would that work with hardbricked? Windows wouldn't load the usb drive for my phone, complaining that the firmware didn't give the "required resources". So if the firmware is borked, I'm not sure it would be able to load an external img.
I couldn't wait, though. Sent it out for jtag repair :fingers-crossed:
Dostoevsky said:
That would be great! I did see the S3 fix that loads a debrick.img from sdcard - would that work with hardbricked? Windows wouldn't load the usb drive for my phone, complaining that the firmware didn't give the "required resources". So if the firmware is borked, I'm not sure it would be able to load an external img.
I couldn't wait, though. Sent it out for jtag repair :fingers-crossed:
Click to expand...
Click to collapse
Hello I was wondering if the Jtag did its job?
sirsmokey said:
Hello I was wondering if the Jtag did its job?
Click to expand...
Click to collapse
Jtag should always do the job, unless there was physical damage done to the motherboard.
Dostoevsky said:
That would be great! I did see the S3 fix that loads a debrick.img from sdcard - would that work with hardbricked? Windows wouldn't load the usb drive for my phone, complaining that the firmware didn't give the "required resources". So if the firmware is borked, I'm not sure it would be able to load an external img.
I couldn't wait, though. Sent it out for jtag repair :fingers-crossed:
Click to expand...
Click to collapse
Trozzul said:
Jtag should always do the job, unless there was physical damage done to the motherboard.
Click to expand...
Click to collapse
Thanks for the quick reply , i guess the next question i should ask , is it really worth the 100 bux for the j tag service or to put the money towards a newer phone ?,hmmm rhetorical i guess
sirsmokey said:
Thanks for the quick reply , i guess the next question i should ask , is it really worth the 100 bux for the j tag service or to put the money towards a newer phone ?,hmmm rhetorical i guess
Click to expand...
Click to collapse
The t989 has great specs, only downside is its PPI (really low) if you still love it, I would wait if you want to send it into JTAG repairs, we are on the verge of unbricking our t989 without JTAG! Looks like we need someone with a working t989D though
I have been studying the other 'unbrick' methods, its definatly mind expanding, the amount of knowledge absorbed can seriously make you forget time n space.
If there is anything I can do / contribute holler at me.
Now ill tell you something weird so I flashed a rom not meant for T989D plus I did it all without being rooted. (if it matters) since Since the flash the phone doesn't boot into recovery or show a bootanimation, just darkness.Yet it felt operational in hand.
Once I plugged it back into the PC all I got was a constant notification of drivers that cannot be identified Also it keeps connecting and disconnecting the device.
None of this is weird until I installed OMAP flash and the T.I. drivers for which was used to fix my friends nexus. After he left I plugged my s2 to the PC still nothing. I looked away for a brief moment . Then i noticed MobileGo for Android popped on screen. Visually showing my s2 as an Alcatel rom.
just bizzare.....
The unbrick method on the S2 is a little different, but in General, at http://forum.xda-developers.com/showthread.php?t=2646310 after a little work, I resurrected a QHSUSB_DLOAD 9025 T989D to the point of ODIN and fully working Android OS working, just missing recovery.. Soon to follow in a day or so.
Lord Zog said:
The unbrick method on the S2 is a little different, but in General, at http://forum.xda-developers.com/showthread.php?t=2646310 after a little work, I resurrected a QHSUSB_DLOAD 9025 T989D to the point of ODIN and fully working Android OS working, just missing recovery.. Soon to follow in a day or so.
Click to expand...
Click to collapse
:goodude I could kiss you, thank you so much!!!! that is exactly where my phone was (QHSUSB_DLOAD):good:
Thanks to the devs behind the unbrick , all of your hard work is deeply appreciated, One Luv :laugh:
Now my 989 is working again, ive had it stuck for the past half year. Life saver you are sir
sirsmokey said:
:goodude I could kiss you, thank you so much!!!! that is exactly where my phone was (QHSUSB_DLOAD):good:
Thanks to the devs behind the unbrick , all of your hard work is deeply appreciated, One Luv :laugh:
Now my 989 is working again, ive had it stuck for the past half year. Life saver you are sir
Click to expand...
Click to collapse
glad to hear its working again! might i ask how you went about this?
sirsmokey said:
:goodude I could kiss you, thank you so much!!!! that is exactly where my phone was (QHSUSB_DLOAD):good:
Thanks to the devs behind the unbrick , all of your hard work is deeply appreciated, One Luv :laugh:
Now my 989 is working again, ive had it stuck for the past half year. Life saver you are sir
Click to expand...
Click to collapse
Lord Zog said:
The unbrick method on the S2 is a little different, but in General, at http://forum.xda-developers.com/showthread.php?t=2646310 after a little work, I resurrected a QHSUSB_DLOAD 9025 T989D to the point of ODIN and fully working Android OS working, just missing recovery.. Soon to follow in a day or so.
Click to expand...
Click to collapse
Hi, so I also have a hard bricked t989 galaxy s2 (tmobile variant) and I'm attempting to understand the instructions. However my phone has another issue...usb connection to the computer does not work, it hasn't worked since the micro usb port on the phone was replaced because the old one broke. So really the phone could charge but never connect to my pc as it cant be detected...so what are my options? If i create the sd card with the image, will i still need to connect it to a pc in order to force the phone into download mode? Please help...
I was doing some experiment with DriveDroid and now I am in big mess.
I think I messed up with drivedroid settings and I was not able to see my phone (oneplus 3 rooted LOS 15.1 ) on my computers.
I have tried different computers but all cant detect my phone.
I have tried drivedroid wizard, different usb systems, different usb settings and no luck.
I have tried uninstalling the drivedroid and still no luck.
The phone was going in charging mode only. Its was not going to MTP mode so I can see the phone internal storage in computer
I have tried to do factory reset also but no luck.
Now I mistakenly wiped data partition also and now the phone is with
No OS
No USB detection on phone while in TWRP
No OTG detection
No any ROM.zip file in phone memory.
When I am on TWRP and connect my phone in computer I am seeing same error message and cant see my phone interenal storage.
Now what to do? Any way to flash ROM ?
I am in big mess, and I dont want to spend money on new phone as of now
I hope someone will be my angle and suggest me something to recover and save me from this mess...
Crying out loud now...
Hi, i think you can use adb sideload with twrp
Uruloki64 said:
Hi, i think you can use adb sideload with twrp
Click to expand...
Click to collapse
Phone is not recognized in computer while in twrp mode so it is not able to connct to adb via USB.
Just get os flashed at OnePlus service center.
I did something same in my previous Samsung phone. I took it to service center and told em that it's not booting up and I don't know the reason. They flashed the firmware from scratch, charged me 250 INR and my phone was back to being normal.
aj141 said:
Just get os flashed at OnePlus service center.
I did something same in my previous Samsung phone. I took it to service center and told em that it's not booting up and I don't know the reason. They flashed the firmware from scratch, charged me 250 INR and my phone was back to being normal.
Click to expand...
Click to collapse
Ya.. going there tomorrow. Lets see what they say about it.
amit3880 said:
Ya.. going there tomorrow. Lets see what they say about it.
Click to expand...
Click to collapse
have u tried hard bricked tool for OP3? if not then try it
https://forum.xda-developers.com/oneplus-3/how-to/guide-mega-unbrick-guide-hard-bricked-t3405700
Hayatzada said:
have u tried hard bricked tool for OP3? if not then try it
https://forum.xda-developers.com/oneplus-3/how-to/guide-mega-unbrick-guide-hard-bricked-t3405700
Click to expand...
Click to collapse
I am not able to follow this as phone is not even coming in USB mode. So its actually soft bricked because can go to twrp and fastboot mode and booting up without OS but USB is not able to detect on my computer.
now the service center guys saying I need to change the motherboard which I dont think is the issue, mother board is not going gone for sure as I can boot up in twrp and fastboot mode. its just may be the usb host controller gone.
Cant decide if I should go ahead with mother board replacement at cost of 10k INR ( phone cost was 28K INR) .
amit3880 said:
I am not able to follow this as phone is not even coming in USB mode. So its actually soft bricked because can go to twrp and fastboot mode and booting up without OS but USB is not able to detect on my computer.
now the service center guys saying I need to change the motherboard which I dont think is the issue, mother board is not going gone for sure as I can boot up in twrp and fastboot mode. its just may be the usb host controller gone.
Cant decide if I should go ahead with mother board replacement at cost of 10k INR ( phone cost was 28K INR) .
Click to expand...
Click to collapse
If you use the Method 2 of the Unbrick Guide, you don't need normal adb/usb mode recognition. Follow that guide scrupulously and step by step. Don't skip any and don't rush.
tnsmani said:
If you use the Method 2 of the Unbrick Guide, you don't need normal adb/usb mode recognition. Follow that guide scrupulously and step by step. Don't skip any and don't rush.
Click to expand...
Click to collapse
We are giving an advice of 10K InR in free and he is not even interested according to his opinion,
Hayatzada said:
We are giving an advice of 10K InR in free and he is not even interested according to his opinion,
Click to expand...
Click to collapse
I even tried that but somehow it is not even recognized as QHUSB_BULK device.
believe me I have tried all things to revive the phone but its not hard brick in my opinion, it can boot into twrp but the when I connect the phone in computer it shows the error message I shown as attachment in my first post.
yes, I have tried 2 different computers and few usb cables.
amit3880 said:
I even tried that but somehow it is not even recognized as QHUSB_BULK device.
believe me I have tried all things to revive the phone but its not hard brick in my opinion, it can boot into twrp but the when I connect the phone in computer it shows the error message I shown as attachment in my first post.
yes, I have tried 2 different computers and few usb cables.
Click to expand...
Click to collapse
Your phone need not be hardbricked to use the Guide. It will work even on a normal perfectly working phone. If your phone is not recognised while following the Guide, it only means one of two things: either it is a hardware fault or you are not following the Guide properly.
amit3880 said:
I even tried that but somehow it is not even recognized as QHUSB_BULK device.
believe me I have tried all things to revive the phone but its not hard brick in my opinion, it can boot into twrp but the when I connect the phone in computer it shows the error message I shown as attachment in my first post.
yes, I have tried 2 different computers and few usb cables.
Click to expand...
Click to collapse
reviewed post
tnsmani said:
Your phone need not be hardbricked to use the Guide. It will work even on a normal perfectly working phone. If your phone is not recognised while following the Guide, it only means one of two things: either it is a hardware fault or you are not following the Guide properly.
Click to expand...
Click to collapse
tried to follow the unbrick guide on windows 10 but phone is not seen as QSBULK device in device manager.
I am going to try on windows 7 as few post said that windows 7 would be better for unbricking than windows 10.
finger crossed, right now flashing windows 7 live iso on USB.
so finally I am declaring my op3 as hardware failure as one of my other phone (yureka) easily identified as 9008 mode in my computer but my op3 is not. so all drivers are installed correctly but somehow my op3's usb hub is failed.
i guess time to move on..
thank you everyone for spending time to help me. it really is supportive and encouraging...
amit3880 said:
so finally I am declaring my op3 as hardware failure as one of my other phone (yureka) easily identified as 9008 mode in my computer but my op3 is not. so all drivers are installed correctly but somehow my op3's usb hub is failed.
i guess time to move on..
thank you everyone for spending time to help me. it really is supportive and encouraging...
Click to expand...
Click to collapse
So sorry about that .... Sad news
@Ammit3880
have you tried plugging in a usb in you phone trough the usb OTG cable? see if twrp recognizes the usb. and just put the needed files on there. maybe windows is just breing ignorant as always
BADA 187 said:
@Ammit3880
have you tried plugging in a usb in you phone trough the usb OTG cable? see if twrp recognizes the usb. and just put the needed files on there. maybe windows is just breing ignorant as always
Click to expand...
Click to collapse
ya.. tried all the ways including various OTG cabel/dongle,, various OS windows 7/8/8.1/10 all the way..
nothing working...
amit3880 said:
ya.. tried all the ways including various OTG cabel/dongle,, various OS windows 7/8/8.1/10 all the way..
nothing working...
Click to expand...
Click to collapse
damn sorry to hear man.
BADA 187 said:
damn sorry to hear man.
Click to expand...
Click to collapse
Got 6T yesterday.... .. Yay!!
Couldnt find other phone competative in the price range.
Time to change the xda signature...
Although I bought 6T now and am kind of happy with that, but I am still missing my oneplus 3 and want to experiment on getting it revived.
By any chance someone can help me answering my doubts.. I would be greatful..
1. Is it ok to replace oneplus3's motherboard with oneplus 3t motherboard ? If by any chance i get any resell op3 or op3t in dirt cheap price I want to know if its ok to use 3T's motherboard.
2. Is there any way I can turn on the wifi from within TWRP and so I can connect to phone via adb over wifi/tcpip ??
Thank you all in advance.