Q&A for Sphinx 4.4.2 V1.6 - Exclusive GPRO LG e980
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Sphinx 4.4.2 V1.6 - Exclusive GPRO LG e980. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Question
mandarjoshiin said:
Hello Guys,
Check below post on LGVIET. A custom rom for E980 specially.. Enjoy.. :good: :victory:
All links removed as per request by Hoangnova. . Please wait for further instructions...
Procedure :
1.Flash the stock 4.4.2 for on E980 (V20g)
(its a must or u may end up having low storage or brick the phone)
2.Install Root
3.Install recovery
4.Goto recovery and wipe data/Cache/Dalvik Cache
5.Flash ROM and perform wipes again..
6.Reboot and enjoy
First boot will take time.. so be patient..
Screenshot below :
Click to expand...
Click to collapse
Hello, This is my first time to flash custom rom. I just want to ask and clarify. I am running 4.4.2. Kitkat.
Correct me if im wrong:
1. Root phone
2. Install recovery
3. Wipe data/Cache/Dalvik Cache
4. Flash Rom
5. Reboot
Thank you
i found 2 major app bugs for U.S.A. users.
The IR blaster for U.S. equipment does not work for many of the equipment ive tried to key in and the alarm has a timing issue where it will not alarm until after about the 3rd snooze. Anyone one else have these issues? I have tried to full wipe flash including cache clearing, up to 3 times with no improvement on these 2 key issues. Anyone find a solution?
Q&A for [RECOVERY] TWRP Method for ROOT users
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY] TWRP Method for ROOT users. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
knock on feature loss after twrp install?
RacerBoy said:
Autorec works with ZVE, I just did mine today. I did have the problem with white lines on waking the screen which was fixed by flashing another kernel. Try this thread:
http://forum.xda-developers.com/sprint-g2/general/ls980-zve-ota-zip-update-zvc-zve-t2912488/page18
If you don't already have root stump using their brute force option works with ZVE.
Click to expand...
Click to collapse
I am on zve and still with stock recovery. I have tried to install twrp recovery before and did the white line fix and all was working well until I realized that I lost the knock on feature. does anyone know of a fix for this? I really want to start tweaking the rom but I can do much with out twrp because I don't want to have to keep lg flashing from the start every time I mess it up. my phone is the sprint lg g2 LS980ZVE stock rom currently with 200 app frozen with app quarantine. thanks for any input.
There are newer twrp releases that have a working knock. I just use AutoRec it's a TeamWin Recovery worth it no question. ?
Q&A for [MultiBoot][unofficial]MultiROM V30 [Updated:28/12/2014]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [MultiBoot][unofficial]MultiROM V30 [Updated:28/12/2014]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Oh, it's not work for me. How to uninstall multirom?
zog222 said:
Oh, it's not work for me. How to uninstall multirom?
Click to expand...
Click to collapse
look at Original thread, 2nd or 3rd post, it has an uninstall instructions.
memory issue on primary rom
I don't know whether it is because of multi ROM or not but now I am starting to get low memory message.I have used 6.*GB out of total of the 6.7 for apps and my apps only occupy 1.48gb of that space.I haven't flashed secondary ROM yet either.is it the same low memory issue workaround I have to use which is given in the first post? If yes can u make it a bit clearer as to what I have to do?
Thanks
I cannot boot in internal rom.
Code:
KEXEC
Operration is not permitted.
Multirom version is multirom-20150222-v31-UNOFFICIAL-endeavoru
No luck
Bro i have tried your steps even twice but no luck for me I get Kexec hardboot... message.
I want to use viperx 4.1.1 as main rom with lyapota's kernel v23 and AICP 9 as secondary rom with stock(aicp) kernel.
Hello,
I tried to install the MultiRom BootManager with your steps. All good. I can also install another Rom with that, but when I tried to go back, it don´t like to go to the internal ROM. How can I came to it back?
I only can install one Kernel/Boot Image, so I have installed the KL-Zeus.Beta10.Old.Layout.img and the first ROM of HTC uses another Boot Image, so the Kernel Kexec, which in every local Rom booting is saying "No Kernel/Boot Image" and booted into the Recovery.
I could only install the TWPR Recovery Version 2.4.0.0 of Endevanoru and there are no TWRP -> List ROM´s -> Flash Modules Zip !!! So i don´t know how come back! PLEASE HELP ME ANYONE how know how i can come back!
Q&A for Freegee OG Pro Edition
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Freegee OG Pro Edition. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Akhileshjj said:
I was able to flash cwm on rooted E988 running on HK kitkat below waa the method followed.
1.Installed cwm using apk method.
2.Rebooted into recovery then went to reboot system. Said no to both of the prompts.
3.Once system restarted then went into freegee to install CWM.
Sent from my LG-E988 using Tapatalk
Click to expand...
Click to collapse
can you explain how did you install cwm using apk method. because i am also having e988 but having a problem installing cwm
FreeGee on my LG Optimus G Pro (Device Model: LG-E989 / Software Version: e98920a)
Good evening, I have a doubt. When I install FreeGee on my LG Optimus G Pro (Device Model: LG-E989 / Software Version: e98920a) shows the message:
Error
Exception thrown wainting for
command to finish
And then immediately appears:
Error
Your aboot is not supported by
loki on software version: E98920a
And if I try to start the Recovery mode the following:
-------------------------------------------------- --------
Secure booting error!
Cause: boot verify certification
-------------------------------------------------- --------
How can I fix this so you can install the CWM12 on my device?
[Q&A] [ROM][STOCK][30A - 5.0.2] Stock rooted Lollipop Rom for Int. G Pad by skin1980
Q&A for [ROM][STOCK][30A - 5.0.2] Stock rooted Lollipop Rom for Int. G Pad by skin1980
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][STOCK][30A - 5.0.2] Stock rooted Lollipop Rom for Int. G Pad by skin1980. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Fantastic
Fantastic, thank you very much, but I have a question, if i have installed the corean rom stock (flashing the KDZ file with lg flash tool) and not this, is there a Root method?
filippo.gambarota said:
Fantastic, thank you very much, but I have a question, if i have installed the corean rom stock (flashing the KDZ file with lg flash tool) and not this, is there a Root method?
Click to expand...
Click to collapse
I don't know, maybe you can root with the flex 2 method. BTW if you have the newer bootloader you can't install twrp or any custom kernel
filippo.gambarota said:
Fantastic, thank you very much, but I have a question, if i have installed the corean rom stock (flashing the KDZ file with lg flash tool) and not this, is there a Root method?
Click to expand...
Click to collapse
Your best option is probably to use the LG flashtool 2014 and flash the old 4.2.2. KDZ
Then your'e back on the old 100% stock LG rom .
Root with towelroot and install TWRP (latest TWRP does not seem to work with flashify, use terminal commands instead)
After that you can use TWRP to flash the lollipop V50030a zip, and that way you keep both root and custom recovery.
Hi, and first of all many thanks for this rom !
However, like in 4.4 Kitkat, I still have the SD card unmounted issue sometimes, and gamma is only at 1.8. What can I do about these problems ? Do I have to flash something in particular ?
For information, my tablet had this rom installed before : http://forum.xda-developers.com/lg-g-pad-83/development/rom-android-5-0-lollipop-lrx21m-t2941207/page7
And I made a full clean before installing the new rom...did I missed something ?
camera
The camera-problem is fixed. Finally !!
Camera does not work on other android 5. Only on this it works
Yes !! thank you very much for all the work.
Thank you very much for this rom, but I have a question pus install updates lg to be modified recovey TWRP 2.8.6.0
screen brightness
Anyone noticed that screen is very bright even on 0% ? (too bright for me) or maybe i did something wrong ?
Few questions
Hello and thanks for working on our device. I have few questions. Are there any screen shots? Should I expect any random reboot or it is really and completely stock!? Are there anything good left out? For instance the good automatic brightness or the knocking ability to turn screen on or off.
Others who installed this rom also feel free to answer please. I appreciate it
It's complete. The whole LG crap is there. It's what you get when you get the official update. I had no reboot in the 5 hours before I went back to aosp.
hey guys...
how run this relase? there are any bugs?
Hi, thx for your work! The rom is running really great.
Any plan to include mod multiwindow for all apps?
I have notice that in quick remote we have lost a lot of type of device. Is it possible to port an other quick remote more complete?
How it compares to aosp ROM? Faster? Some unique featues? Besides lg crap?
Shimaran said:
Hi, and first of all many thanks for this rom !
However, like in 4.4 Kitkat, I still have the SD card unmounted issue sometimes, and gamma is only at 1.8. What can I do about these problems ? Do I have to flash something in particular ?
For information, my tablet had this rom installed before : http://forum.xda-developers.com/lg-...om-android-5-0-lollipop-lrx21m-t2941207/page7
And I made a full clean before installing the new rom...did I missed something ?
Click to expand...
Click to collapse
Had the same sd card issue, maybe is lollipop related
There is any solution to the unexpected remove of sd card issue?
It wasn't occurring with the lollipop aosp version. Maybe I should go back to aosp...
Inviato dal mio LG-V500 utilizzando Tapatalk
Update to 30A from stock
Hello
Using a stock unrooted unmodified version of kitkat on my gpad and have few questions:
I've noticed the lollipop rom comes to around 1.1 gb. Will the OTA too be of the same size?
I've seen instructions that this rom can be dirty flashed over the stock rom. Does this mean I download and save the new rom locally in the tab, go to stock recovery and flash the new rom directly from recovery? Just like that?
Oh and has anyone got the OTA at all?
Edit: anyone using international version of the g pad...
Thanks
After 2 weeks using this ROM, I uninstalled it because gamma was too low and videos were quite sluggish. That's too bad because battery management is far better than CM 11.2 based ROMs (especially while tablet is not in use), and LG's interface is interesting...but it's not designed for everyday use. At least not yet.
Error Loki-fying
I get this error while flashing this rom via CWM --> Error loki-fying boot image, what am i doing wrong?
petition
Hello Skin1980. I respect your work works very well for me. I need your help and understanding. You can do the same for LG GPAD 8.0 v490 V49020a_00? I can not install this device and root. Please help me.
Hi I have a weird issue, my wifi disconnects constantly every time the tablet is on deep sleep mode or downloading something. It's annoying especially for downloads. I already checked my wifi settings and they are set at "Always on" but still. Anybody else have this issues? BTW I dirty flash it over 4.4.2 maybe with a clean flash it get fixed