Q&A for Sphinx 4.4.2 V1.6 - Exclusive GPRO LG e980
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Sphinx 4.4.2 V1.6 - Exclusive GPRO LG e980. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Question
mandarjoshiin said:
Hello Guys,
Check below post on LGVIET. A custom rom for E980 specially.. Enjoy.. :good: :victory:
All links removed as per request by Hoangnova. . Please wait for further instructions...
Procedure :
1.Flash the stock 4.4.2 for on E980 (V20g)
(its a must or u may end up having low storage or brick the phone)
2.Install Root
3.Install recovery
4.Goto recovery and wipe data/Cache/Dalvik Cache
5.Flash ROM and perform wipes again..
6.Reboot and enjoy
First boot will take time.. so be patient..
Screenshot below :
Click to expand...
Click to collapse
Hello, This is my first time to flash custom rom. I just want to ask and clarify. I am running 4.4.2. Kitkat.
Correct me if im wrong:
1. Root phone
2. Install recovery
3. Wipe data/Cache/Dalvik Cache
4. Flash Rom
5. Reboot
Thank you
i found 2 major app bugs for U.S.A. users.
The IR blaster for U.S. equipment does not work for many of the equipment ive tried to key in and the alarm has a timing issue where it will not alarm until after about the 3rd snooze. Anyone one else have these issues? I have tried to full wipe flash including cache clearing, up to 3 times with no improvement on these 2 key issues. Anyone find a solution?
Related
Q&A for [RECOVERY] TWRP Method for ROOT users
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY] TWRP Method for ROOT users. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
knock on feature loss after twrp install?
RacerBoy said:
Autorec works with ZVE, I just did mine today. I did have the problem with white lines on waking the screen which was fixed by flashing another kernel. Try this thread:
http://forum.xda-developers.com/sprint-g2/general/ls980-zve-ota-zip-update-zvc-zve-t2912488/page18
If you don't already have root stump using their brute force option works with ZVE.
Click to expand...
Click to collapse
I am on zve and still with stock recovery. I have tried to install twrp recovery before and did the white line fix and all was working well until I realized that I lost the knock on feature. does anyone know of a fix for this? I really want to start tweaking the rom but I can do much with out twrp because I don't want to have to keep lg flashing from the start every time I mess it up. my phone is the sprint lg g2 LS980ZVE stock rom currently with 200 app frozen with app quarantine. thanks for any input.
There are newer twrp releases that have a working knock. I just use AutoRec it's a TeamWin Recovery worth it no question. ?
Q&A for [MultiBoot][unofficial]MultiROM V30 [Updated:28/12/2014]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [MultiBoot][unofficial]MultiROM V30 [Updated:28/12/2014]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Oh, it's not work for me. How to uninstall multirom?
zog222 said:
Oh, it's not work for me. How to uninstall multirom?
Click to expand...
Click to collapse
look at Original thread, 2nd or 3rd post, it has an uninstall instructions.
memory issue on primary rom
I don't know whether it is because of multi ROM or not but now I am starting to get low memory message.I have used 6.*GB out of total of the 6.7 for apps and my apps only occupy 1.48gb of that space.I haven't flashed secondary ROM yet either.is it the same low memory issue workaround I have to use which is given in the first post? If yes can u make it a bit clearer as to what I have to do?
Thanks
I cannot boot in internal rom.
Code:
KEXEC
Operration is not permitted.
Multirom version is multirom-20150222-v31-UNOFFICIAL-endeavoru
No luck
Bro i have tried your steps even twice but no luck for me I get Kexec hardboot... message.
I want to use viperx 4.1.1 as main rom with lyapota's kernel v23 and AICP 9 as secondary rom with stock(aicp) kernel.
Hello,
I tried to install the MultiRom BootManager with your steps. All good. I can also install another Rom with that, but when I tried to go back, it don´t like to go to the internal ROM. How can I came to it back?
I only can install one Kernel/Boot Image, so I have installed the KL-Zeus.Beta10.Old.Layout.img and the first ROM of HTC uses another Boot Image, so the Kernel Kexec, which in every local Rom booting is saying "No Kernel/Boot Image" and booted into the Recovery.
I could only install the TWPR Recovery Version 2.4.0.0 of Endevanoru and there are no TWRP -> List ROM´s -> Flash Modules Zip !!! So i don´t know how come back! PLEASE HELP ME ANYONE how know how i can come back!
Q&A for [ROM][CM9]Touchwiz Revolutionized 5.0-V4.0 [FINAL] [UPDATE][12.12.2013]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][CM9]Touchwiz Revolutionized 5.0-V4.0 [FINAL] [UPDATE][12.12.2013]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Downloaded and installed, looks very nice, and very runny
Is Amarulz's script working on it ?
Error after installation of custom rom
I installed the rom from this link:
http://forum.xda-developers.com/newreply.php?do=newreply&noquote=1&p=58305303
After rebooting it got stuck on
Encryption unsuccessful
Encryption was interrupted and
can't complete. As a result the data on your phone is no longer accessible.
To resume using your phone you must perform a factory reset. When you set up your phone after reset, you'll have an opportunity to restore any data that was backed up to your Google account.
Is it possible to get this rom working or I will have to switch back to my stock rom?
Is this thread dead or what? I didn't get any reply
zordankrish said:
Error after installation of custom rom
I installed the rom from this link:
http://forum.xda-developers.com/newreply.php?do=newreply&noquote=1&p=58305303
After rebooting it got stuck on
Encryption unsuccessful
Encryption was interrupted and
can't complete. As a result the data on your phone is no longer accessible.
To resume using your phone you must perform a factory reset. When you set up your phone after reset, you'll have an opportunity to restore any data that was backed up to your Google account.
Is it possible to get this rom working or I will have to switch back to my stock rom?
Click to expand...
Click to collapse
Most stable and beautiful rom for cooper. How match time i lost with other roms, and i always go back to him.
Just one Q?: can someone port S3/S4 caller screen from Cooperve ROM "TouchWiz-Resurrection V9.5"? looks amazing.
Bagdeprovİder where ?
Plss. Badgeprovİder
Bohdan.Stefanyshyn said:
Most stable and beautiful rom for cooper. How match time i lost with other roms, and i always go back to him.
Just one Q?: can someone port S3/S4 caller screen from Cooperve ROM "TouchWiz-Resurrection V9.5"? looks amazing.
Click to expand...
Click to collapse
i got my phone bricked with this rom. Do we need to partition the sd card beore installing it. Which verison of clockwork mod have you used for this installation?
great job
downloading
and i will testing ..............
Greatest rom
I've tried sooooo many rom.
this is THE BEST ROM i've ever tried.
good job !!
will it be for kitkat or lollipop??
Please, can you send me "Multilanguage Keyboard from stock", because this is best keyboard which I know.
Thanks
i m using xda as visitor so much for lots of roms in two years. at last i flashed your rom a few months ago and in this time i see your rom is the most perfect rom i ve used. thank you for the rom. (i ve just become a member for saying this)
This ROM is for S5830 or S5830i (or both?)
Thanks
Q&A for [F220K/F240/E980] MultiROM has finally arrived in G Pro!
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [F220K/F240/E980] MultiROM has finally arrived in G Pro!. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
E980 confirmed working.
Genie's said:
There's no limits in installing ROMs in Secondary slots. Just install anything you just want to flash.
But you should install kexec-supported ROM or Kernel in just Primary Slot.
Click to expand...
Click to collapse
Using the E980 version of BlissPop with the oxykernel as my primary rom, I have successfully installed multiple roms. Choose install to internal memory, your file will almost certainly be a .zip file, as I've seen no dedicated multirom images yet. This means, of course that the twrp multirom version for E980 works, as
well. On a couple of occasions, I've had twrp close unexpectedly to a black screen, at the end of rom installation. You may need to reboot into recovery via hardware keys (Power button plus volume up) So far, it seems pretty flexible and forgiving.
No Second Slot
i CAnt get the second slot either in blisspop 3.2 nor in cm 12.1 with oxygen kernel just seethe primary slot named internal. what do ido pls suggest . Thanks .Waiting for ur reply
Using f240l kitkat stock
Stupid idea!
That was probably very stupid idea! If I saw this thread would not do such mistake!
So...after that I flash my LG G Pro with LG Flash Tool on KDZ Firmware LG G PRO F240 K update was canceled (at 96%) because error. Then I'm disconnect the phone from PC and remove the battery from phone and try again the same steps as before. Since then my phone is total dead (no power; no battery; battery is not charging; etc.). ((
Have anyone idea what is going wrong?
Sorry for my poor english!
how install step by step
Hello!
I have a LG G Pro F240 F with http://forum.xda-developers.com/optimus-g-pro/development/rom-romgx5-0v1-gxl-gprof240-gk-t3058861. I would like to install MultiROM, unfortunately during the installation MultiROM TWRP I have a error 7.Please help me.
Thank you very much for multirom! its awesome
Q&A for {4.1.2} RacingBean/Cigar Galaxy (3.1-10) The Fastest Galaxy
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for {4.1.2} RacingBean/Cigar Galaxy (3.1-10) The Fastest Galaxy. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
hey when i install xposed and install framework+modules it become hang an reboot itself. how i can fix it? and when i install apk's file it become hang and reboot again. please help me
rafliadrian said:
hey when i install xposed and install framework+modules it become hang an reboot itself. how i can fix it? and when i install apk's file it become hang and reboot again. please help me
Click to expand...
Click to collapse
I've got the same problem when i'm tryin to install gapps Just uncheck the gapps in the Aroma and try boot again Remember to boot after install and then reboot into CWM I'm looking for gapps that i can install with the CWM cuz I can't install gapps that are in the Aroma :x