Q&A for [MultiBoot][unofficial]MultiROM V30 [Updated:28/12/2014]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [MultiBoot][unofficial]MultiROM V30 [Updated:28/12/2014]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Oh, it's not work for me. How to uninstall multirom?
zog222 said:
Oh, it's not work for me. How to uninstall multirom?
Click to expand...
Click to collapse
look at Original thread, 2nd or 3rd post, it has an uninstall instructions.
memory issue on primary rom
I don't know whether it is because of multi ROM or not but now I am starting to get low memory message.I have used 6.*GB out of total of the 6.7 for apps and my apps only occupy 1.48gb of that space.I haven't flashed secondary ROM yet either.is it the same low memory issue workaround I have to use which is given in the first post? If yes can u make it a bit clearer as to what I have to do?
Thanks
I cannot boot in internal rom.
Code:
KEXEC
Operration is not permitted.
Multirom version is multirom-20150222-v31-UNOFFICIAL-endeavoru
No luck
Bro i have tried your steps even twice but no luck for me I get Kexec hardboot... message.
I want to use viperx 4.1.1 as main rom with lyapota's kernel v23 and AICP 9 as secondary rom with stock(aicp) kernel.
Hello,
I tried to install the MultiRom BootManager with your steps. All good. I can also install another Rom with that, but when I tried to go back, it don´t like to go to the internal ROM. How can I came to it back?
I only can install one Kernel/Boot Image, so I have installed the KL-Zeus.Beta10.Old.Layout.img and the first ROM of HTC uses another Boot Image, so the Kernel Kexec, which in every local Rom booting is saying "No Kernel/Boot Image" and booted into the Recovery.
I could only install the TWPR Recovery Version 2.4.0.0 of Endevanoru and there are no TWRP -> List ROM´s -> Flash Modules Zip !!! So i don´t know how come back! PLEASE HELP ME ANYONE how know how i can come back!
Related
Q&A for [DEV][ROM][4.4]Cyanogenmod 11[WIP][ALPHA-1]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [DEV][ROM][4.4]Cyanogenmod 11[WIP][ALPHA-1]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Camera app
After updating to RC11 I didn't have an stock camera app. If you don't,download the google camera zip from the post with all the gapps,extract it and install the apk from system\app,then it'll work
Should there be an stock camera app?
Bluetooth won't connect
Hi,
I run cm11 rc13 on my gio. I paired it with my tablet. I can send and receive files.
However, the connection won't stay. This is frustrating because I want to use my phone to smart unlock my tablet.
Is this a known bug, or am I the only one experiencing it?
I think Gio doesn't support ext4
As the title says,I can't seem to make my Gio running RC11 To make my sd-card an ext4 partition,the recovery makes it ext3 even do selected ext4. Any support? Need it for space issues
Using Cast Screen
Hi;Can any one Use Cast Screen in this rom? I Have a LG Smart TV and For use cast Screen First Should Conect to TV via WIFI Direct But This rom Hasn't WiFI Direct! Can anyone advise what should I do? (Sorry for Bad English!)
Can't get this install working - stuck on the blue CM logo after flashing..
Doing a wipe after the flashing causes the phone to hang one step earlier - with the Samsung logo.
- CWM 6.0.5.3.
- CM11 4.4.4 RC13 / RC14 (both give same problem)
- Flashed from stock ROM (A 2.3.7)
a2sd darktremor in cm11
Anyone has got a2sd darktremor working with cm11 Rom? After Installing referring steps from many installation guides, used 2.7.5.3 beta04 script with ext4(512mb) partition, when i do an a2sd check it says
Segmentation fault
Segmentation fault
/system/bin/bash: /system/bin/launcha2sd: No such file or directory found
TIA
me too!
mpc007 said:
Can't get this install working - stuck on the blue CM logo after flashing..
Doing a wipe after the flashing causes the phone to hang one step earlier - with the Samsung logo.
- CWM 6.0.5.3.
- CM11 4.4.4 RC13 / RC14 (both give same problem)
- Flashed from stock ROM (A 2.3.7)
Click to expand...
Click to collapse
I have the same issue, have you come across a fix? Also, where did you download your stock ROM from? I can't find any links that work anymore! I have found one, but its all in a language I cannot read! :S
orangejuice43 said:
I have the same issue, have you come across a fix? Also, where did you download your stock ROM from? I can't find any links that work anymore! I have found one, but its all in a language I cannot read! :S
Click to expand...
Click to collapse
are you the same guy from "Half-bricked gio" thread
anyway, here you go:
http://www.sammobile.com/firmwares/database/GT-S5660/
amazing!! yes I am and thank you very much
I can't find the latest build, I guess its RC14, because the arm6 website is down...
Does anyone have it?
Q&A for [ROM][MK3][4.3][TW]The People's ROM GS3.31 5/18/14
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][MK3][4.3][TW]The People's ROM GS3.31 5/18/14. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Awesome ROM. Used it for over half a year. Thanks!
EDIT: Guess my comment was moved to Q&A..
FancyJesse said:
Awesome ROM. Used it for over half a year. Thanks!
EDIT: Guess my comment was moved to Q&A..
Click to expand...
Click to collapse
It is something new to allow new users with less than 10 posts to ask a question directly in the development thread...but to avoid spam and such it makes a Q&A thread and alerts the developer. I am glad you liked the ROM. I wish I had time to Update it to ND8 or to work on the HTC M8 but at the present I don't.
Old-style installer
It's not your flash card. Look in Phil'z settings for the option to "Don't Allow Old update-binary". Uncheck it. Install the zip. Enjoy the goodness.
2 questions
This is a great rom @Kenny!!Thanks first for all the work you've put into it.
I have 2 questions....I initially installed 3.31 and wiped all including system. Then I factor reset back to stock and flashed 3.17 following the instructions to a T. Now im trying to flash 3.31 and i get the error
format() expects5 args, got 3
E: Error in /storage/sdcasrd1/The PeoplesRomv3.31.zip
(STATUS 7)
ill try the response about checking Phil settings and reply back what happens.
Also since running 3.17 i have been promted to update firmware to 4.3,what i want to know is will this foob anything up as i really like this rom and would hate to start again and have possible issues. if i update will i continue to get update prompts...i was on 4.4.2 before i started this all.
Thanks in Advance
EDIT: Figured it out(looking thru the thread),updated to the latest Philz,reflashed 3.17 rebooted and signed in. Rebooted to recovery flashed 3.31 and all is well(did lose root though,but reflashed SU as well)....really nice rom...:good::good:
Xposed Mods and SuperSU
So forgive me if this has already been answered I did try searching the thread prior to posting and didnt find anything. Nonetheless when I click on the Framework Installer button or the Wanam Mods I get the message " Unfortunately, Wicked ROM Control has stopped" and it essentially force closes. What is it that I need to do to remedy this? Thanks in advance
Q&A for [ROM][CM9]Touchwiz Revolutionized 5.0-V4.0 [FINAL] [UPDATE][12.12.2013]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][CM9]Touchwiz Revolutionized 5.0-V4.0 [FINAL] [UPDATE][12.12.2013]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Downloaded and installed, looks very nice, and very runny
Is Amarulz's script working on it ?
Error after installation of custom rom
I installed the rom from this link:
http://forum.xda-developers.com/newreply.php?do=newreply&noquote=1&p=58305303
After rebooting it got stuck on
Encryption unsuccessful
Encryption was interrupted and
can't complete. As a result the data on your phone is no longer accessible.
To resume using your phone you must perform a factory reset. When you set up your phone after reset, you'll have an opportunity to restore any data that was backed up to your Google account.
Is it possible to get this rom working or I will have to switch back to my stock rom?
Is this thread dead or what? I didn't get any reply
zordankrish said:
Error after installation of custom rom
I installed the rom from this link:
http://forum.xda-developers.com/newreply.php?do=newreply&noquote=1&p=58305303
After rebooting it got stuck on
Encryption unsuccessful
Encryption was interrupted and
can't complete. As a result the data on your phone is no longer accessible.
To resume using your phone you must perform a factory reset. When you set up your phone after reset, you'll have an opportunity to restore any data that was backed up to your Google account.
Is it possible to get this rom working or I will have to switch back to my stock rom?
Click to expand...
Click to collapse
Most stable and beautiful rom for cooper. How match time i lost with other roms, and i always go back to him.
Just one Q?: can someone port S3/S4 caller screen from Cooperve ROM "TouchWiz-Resurrection V9.5"? looks amazing.
Bagdeprovİder where ?
Plss. Badgeprovİder
Bohdan.Stefanyshyn said:
Most stable and beautiful rom for cooper. How match time i lost with other roms, and i always go back to him.
Just one Q?: can someone port S3/S4 caller screen from Cooperve ROM "TouchWiz-Resurrection V9.5"? looks amazing.
Click to expand...
Click to collapse
i got my phone bricked with this rom. Do we need to partition the sd card beore installing it. Which verison of clockwork mod have you used for this installation?
great job
downloading
and i will testing ..............
Greatest rom
I've tried sooooo many rom.
this is THE BEST ROM i've ever tried.
good job !!
will it be for kitkat or lollipop??
Please, can you send me "Multilanguage Keyboard from stock", because this is best keyboard which I know.
Thanks
i m using xda as visitor so much for lots of roms in two years. at last i flashed your rom a few months ago and in this time i see your rom is the most perfect rom i ve used. thank you for the rom. (i ve just become a member for saying this)
This ROM is for S5830 or S5830i (or both?)
Thanks
Q&A for [F220K/F240/E980] MultiROM has finally arrived in G Pro!
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [F220K/F240/E980] MultiROM has finally arrived in G Pro!. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
E980 confirmed working.
Genie's said:
There's no limits in installing ROMs in Secondary slots. Just install anything you just want to flash.
But you should install kexec-supported ROM or Kernel in just Primary Slot.
Click to expand...
Click to collapse
Using the E980 version of BlissPop with the oxykernel as my primary rom, I have successfully installed multiple roms. Choose install to internal memory, your file will almost certainly be a .zip file, as I've seen no dedicated multirom images yet. This means, of course that the twrp multirom version for E980 works, as
well. On a couple of occasions, I've had twrp close unexpectedly to a black screen, at the end of rom installation. You may need to reboot into recovery via hardware keys (Power button plus volume up) So far, it seems pretty flexible and forgiving.
No Second Slot
i CAnt get the second slot either in blisspop 3.2 nor in cm 12.1 with oxygen kernel just seethe primary slot named internal. what do ido pls suggest . Thanks .Waiting for ur reply
Using f240l kitkat stock
Stupid idea!
That was probably very stupid idea! If I saw this thread would not do such mistake!
So...after that I flash my LG G Pro with LG Flash Tool on KDZ Firmware LG G PRO F240 K update was canceled (at 96%) because error. Then I'm disconnect the phone from PC and remove the battery from phone and try again the same steps as before. Since then my phone is total dead (no power; no battery; battery is not charging; etc.). ((
Have anyone idea what is going wrong?
Sorry for my poor english!
how install step by step
Hello!
I have a LG G Pro F240 F with http://forum.xda-developers.com/optimus-g-pro/development/rom-romgx5-0v1-gxl-gprof240-gk-t3058861. I would like to install MultiROM, unfortunately during the installation MultiROM TWRP I have a error 7.Please help me.
Thank you very much for multirom! its awesome
Q&A for T-Mobile WiFi Calling Fix For INTL Based Roms{TESTING}
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for T-Mobile WiFi Calling Fix For INTL Based Roms{TESTING}. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Thank You!
steal25 said:
So after going crazy all night wondering why its working on my device and not others who have tested, the only thing i can think is that i am using @thicklizard s kernel so i have put together a 3rd zip for testing with it included. I flashed the included kernel with viper and it broke it, then reflashed ThickLizards kernel and again all is working as it should including Wi-Fi Only option.Just flash in recovery the zip below.
I had my phone bricked at the Viper one Logo. I just flashed your 3rd zip file and it came back.
I will update you on whether or not Wifi calling works when it completes booting. Thanks for posting the fix. Really wasnt looking forward to reflashing the rom!
Click to expand...
Click to collapse
mikeosia said:
steal25 said:
So after going crazy all night wondering why its working on my device and not others who have tested, the only thing i can think is that i am using @thicklizard s kernel so i have put together a 3rd zip for testing with it included. I flashed the included kernel with viper and it broke it, then reflashed ThickLizards kernel and again all is working as it should including Wi-Fi Only option.Just flash in recovery the zip below.
I had my phone bricked at the Viper one Logo. I just flashed your 3rd zip file and it came back.
I will update you on whether or not Wifi calling works when it completes booting. Thanks for posting the fix. Really wasnt looking forward to reflashing the rom!
Click to expand...
Click to collapse
Remember roms now take quite a while sometimes before "android is updating" even shows up. Please let me know if this works for you.
Click to expand...
Click to collapse
S-Off Needed for Wi-Fi Calling Fix
Is S-Off needed to install this zip package from TWRP? I have ViperOneM9 3.5.0 and tried to install this zip from TWRP after flashing Viper and the phone freezes on the HTC logo. Is it just that I do not have S-Off or is there something else I am missing? Thanks.