Sim wouldn't come off so i yanked the sim out and one of the prongs broke. I still have warranty on it, does it cover it?
ifukdup said:
Sim wouldn't come off so i yanked the sim out and one of the prongs broke. I still have warranty on it, does it cover it?
Click to expand...
Click to collapse
It depends on if its really noticeable, repair sim card reader requires replacing the whole board. Although you can buy sim card readers and you can try soldering them on yourself 9/10 it doesnt work
If you can make them believe that your sim card one day stopped reading they might repair it for you
I suggest taking it in to your carrier to get it repaired
ifukdup said:
Sim wouldn't come off so i yanked the sim out and one of the prongs broke. I still have warranty on it, does it cover it?
Click to expand...
Click to collapse
If Warranty doesn't cover repair. This Service is reasonable....http://www.mobiledeviceworkshop.co.uk/lg-g3-d855-sim-card-reader-repair-service-2498-p.asp
Related
Anyone had any luck with these? I just got one from www.microsim-shop.com and when I put the adapter in to test fit it got stuck. Managed to get it out but I think I bent some of the sim card pins on the Play. Hopefully AT&T or Sony will replace it. Only had it for a week or so.
Sent from my iPhone 4s
I'm looking to buy a replacement digitizer because mine has a crack in it. Now I can buy 2 different kinds on eBay, with or without the IC on the cable. Is there any way to check which one I have without taking out the digitizer? Because I don't have the tools to do this and they come with the screen I can buy.
.................................ciao
Old but since no one answered I will.
Remove SIM card and if under it you can see IC ,you need digitizer with IC
I saw instructions on:
Code:
askmefast.com/How_can_I_see_on_my_HTC_Wildfire_if_the_digitizer_is_with_IC_or_not-qna1265945.html
I found it out myself: You have to remove the back (6 screws, breaks void), behind the the simcard reader is a small opening in the circuit board and if there is a black cable, you have no IC. If there is some microchip, then you need the version with the IC. Thanks anyways
Click to expand...
Click to collapse
So no way to tell without disassembly? One post says you have to disassemble and one doesnt...
Here's mine.. Anyone tell if I need the IC or not?
So my xperia play 4g has bent sim card pins. They arent missing...just bent. I was wondering if i could unbend them or if there is a way to replace it without replacing the entire mother board, or even if i do have to replace the entire motherboard....where can i get one? I bent them because of those stupid micro sim adapters...never again!
I had that happen the first time I got my play. I ended up getting it replaced. Did you happen it put the adapter in the phone with no sim card in it? I've been using an adapter now for a while with no issues since the first usage other than having to use a paperclip to remove the adapter cause it is slightly thicker than a normal sim card and sticks.
exactly..i was dumb enough to put the sim adapter in the slot without a sim card in it....when i tried to pull it out it came out...but i wasnt able to put my normal sim in. i can see it with a flashlight...its bent. i need to find a way to remedy this.
Goodluck man like I said I ended up getting a replacement phone.
SIM Issue
I have inserted working Sim Card (not AT&T) and when I restart my phone it still shows me "emergency mode" no Sim. I was trying to unlock my phone.
I have cut my old regular SIM card to Micro and use the same adapter which came with the Sony Ion LT28at. OR I don't have to use that adapter.
I am stuck now because I purchased this phone from ebay (no return).
Is it a Sim card try problem or other? ?
Please help..
I have a Galaxy S2 I9100 that was water damaged. I bought another one in ebay with damaged sim tray, so I would replace the damaged sim tray with my water damaged one. But when the phone arrived sim tray of both phone are differents, and I cant find the damage sim tray anywhere.
I uploaded a pic of the damaged sim tray that I cant find in any place.
Hello,
I have a problem with "LG G Pro Lite" sim reader. I doesn't read sim, as not inserted.
I have found that there are two contact pins of the reader that are bent, and one of them is broken, so I decided desoldering the reader to put a new one (I have not yet received), but when I unsoldered the reader, one pin is broken in motherboard.
Tomorrow I will upload photo of motherboard. For now I leave a picture of the affected pin, but I need but I need someone to check with a tester if the pin has continuity with some other point of the plate, to repair it.
Thank you very much
Edddick said:
Hello,
I have a problem with "LG G Pro Lite" sim reader. I doesn't read sim, as not inserted.
I have found that there are two contact pins of the reader that are bent, and one of them is broken, so I decided desoldering the reader to put a new one (I have not yet received), but when I unsoldered the reader, one pin is broken in motherboard.
Tomorrow I will upload photo of motherboard. For now I leave a picture of the affected pin, but I need but I need someone to check with a tester if the pin has continuity with some other point of the plate, to repair it.
Thank you very much
Click to expand...
Click to collapse
This is the broken pin (google image. Mine is broken). Heeeelp :.(
Thank you