I have a Galaxy S2 I9100 that was water damaged. I bought another one in ebay with damaged sim tray, so I would replace the damaged sim tray with my water damaged one. But when the phone arrived sim tray of both phone are differents, and I cant find the damage sim tray anywhere.
I uploaded a pic of the damaged sim tray that I cant find in any place.
Related
Anyone had any luck with these? I just got one from www.microsim-shop.com and when I put the adapter in to test fit it got stuck. Managed to get it out but I think I bent some of the sim card pins on the Play. Hopefully AT&T or Sony will replace it. Only had it for a week or so.
Sent from my iPhone 4s
So my xperia play 4g has bent sim card pins. They arent missing...just bent. I was wondering if i could unbend them or if there is a way to replace it without replacing the entire mother board, or even if i do have to replace the entire motherboard....where can i get one? I bent them because of those stupid micro sim adapters...never again!
I had that happen the first time I got my play. I ended up getting it replaced. Did you happen it put the adapter in the phone with no sim card in it? I've been using an adapter now for a while with no issues since the first usage other than having to use a paperclip to remove the adapter cause it is slightly thicker than a normal sim card and sticks.
exactly..i was dumb enough to put the sim adapter in the slot without a sim card in it....when i tried to pull it out it came out...but i wasnt able to put my normal sim in. i can see it with a flashlight...its bent. i need to find a way to remedy this.
Goodluck man like I said I ended up getting a replacement phone.
SIM Issue
I have inserted working Sim Card (not AT&T) and when I restart my phone it still shows me "emergency mode" no Sim. I was trying to unlock my phone.
I have cut my old regular SIM card to Micro and use the same adapter which came with the Sony Ion LT28at. OR I don't have to use that adapter.
I am stuck now because I purchased this phone from ebay (no return).
Is it a Sim card try problem or other? ?
Please help..
So due to some buffonery on my part, one of the pins on my immaculate Nexus broke.
So I have two questions:
1. Is this repairable? (The pin isn't bent, its broken - it fell out).
2. If it is, then is this the part - Samsung Galaxy Nexus GTI9250 Middle Plate?
Thanks.
My wife did the same with her nexus S - we contacted samsung US and they said they would repair it for 70usd. The best part was - the phone got stolen before we could ship it out for the repair! facepalm*
Yes its repair/replaceable.
No that's not the right part. You need a SIM card connector for the Galaxy Nexus.
On the Galaxy Nexus the SIM plate is soldered on. So unless you can solder your not gonna be able to do it yourself.
I broke mine on my Nexus S and got it repaired for $40 at a cell phone repair shop.
Sim wouldn't come off so i yanked the sim out and one of the prongs broke. I still have warranty on it, does it cover it?
ifukdup said:
Sim wouldn't come off so i yanked the sim out and one of the prongs broke. I still have warranty on it, does it cover it?
Click to expand...
Click to collapse
It depends on if its really noticeable, repair sim card reader requires replacing the whole board. Although you can buy sim card readers and you can try soldering them on yourself 9/10 it doesnt work
If you can make them believe that your sim card one day stopped reading they might repair it for you
I suggest taking it in to your carrier to get it repaired
ifukdup said:
Sim wouldn't come off so i yanked the sim out and one of the prongs broke. I still have warranty on it, does it cover it?
Click to expand...
Click to collapse
If Warranty doesn't cover repair. This Service is reasonable....http://www.mobiledeviceworkshop.co.uk/lg-g3-d855-sim-card-reader-repair-service-2498-p.asp
Hello,
I have a problem with "LG G Pro Lite" sim reader. I doesn't read sim, as not inserted.
I have found that there are two contact pins of the reader that are bent, and one of them is broken, so I decided desoldering the reader to put a new one (I have not yet received), but when I unsoldered the reader, one pin is broken in motherboard.
Tomorrow I will upload photo of motherboard. For now I leave a picture of the affected pin, but I need but I need someone to check with a tester if the pin has continuity with some other point of the plate, to repair it.
Thank you very much
Edddick said:
Hello,
I have a problem with "LG G Pro Lite" sim reader. I doesn't read sim, as not inserted.
I have found that there are two contact pins of the reader that are bent, and one of them is broken, so I decided desoldering the reader to put a new one (I have not yet received), but when I unsoldered the reader, one pin is broken in motherboard.
Tomorrow I will upload photo of motherboard. For now I leave a picture of the affected pin, but I need but I need someone to check with a tester if the pin has continuity with some other point of the plate, to repair it.
Thank you very much
Click to expand...
Click to collapse
This is the broken pin (google image. Mine is broken). Heeeelp :.(
Thank you