Related
Keeping a backup of current working condition of your Android phone is always a must if you play around with your phone
The ROM backup that you will obtain can be flashed any time using SP Flash Tool and your phone will be restored to the condition in which it was when you dumped the ROM. Since rooting is must before dumping ROM, if you flash it again you will still have root.
Please note that you need root permissions to perform the dumping procedure. So don’t try it if your phone is not rooted! Also make sure you have enough space on SD Card as this will store the backup to “backup_v2″ folder on SD card.
Steps to Backup ROM
Download this file and extract. You will get a folder “gscript”. In that you will find another folder “bin“, and two files: “back_mt6575_a4_v2d.sh” and “GScriptLite.apk”
Open GSript Lite.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Go to options and select "Add script"
Tick on "Needs SU"..and Press "Load file"
Select Your Scrtipt file and press "add".
Then You will see your script file at bottom just tap on it.
Process of Back up will start Do not press any key until the progress ends.
Now Your backup is completed and should be saved to /mnt/sdcard2/backup_v2.
This Backup can be restored by two methods
1. CWM recovery
2. SP flashtools.
How to Restore VIA CWM Recovery.
CWM recovery for Micromax A68 and Qmobile noir A6 is already posted by me. Download it from this thread
Turn off your phone and start it in recovery mode by pressing volume UP + volume down + power button.
Choose wipe data/factory reset
Go to advanced -> wipe dalvik cache.
Go back again. -> mounts and storage -> format /system
Go back to main menu -> backup and restore -> advanced restore -> restore /system. Choose the folder “BDRS-2013-xx-xx”
Select system image and Confirm it.
Restart the phone. You should have a working and stable Phone
For Hard Bricked Phones
What's needed:
USB data cable
MediaTek USB VCOM drivers
SP Flash Tool Download ( Latest version SP_Flash_Tool_v3.1224.01)
First of all, make sure that you have MediaTek DA USB VCOM drivers installed.
Flashing only part of the ROM
In case you want to flash just one part of the ROM, that is also possible. In the shown example, only recovery image will be flashed.
Deselect all parts except the one(s) you want to flash and then press F9 (or hit Download button).
The tool will immediately show a warning because not all parts are selected, but you should continue anyway. Safely press Yes to continue.
The download of the chosen partition image will start and after the yellow bar is complete, the popup with the green circle should appear.
Please note that, even though it isn't mandatory to select it on the list of images to flash,
preloader file must be present in the same folder as the other partition(s) that you want to flash, or else phone will not be able to enter into download mode
Attention: Please follow the instructions carefully. I will not take any responsibility on whatever may happen with your phone.
Very important warning: Always make sure that you trust the sources of the ROM you download and know that it is meant for your phone.
After flashing a wrong preloader, your phone will be completely dead (can't be powered on, it will not charge and won't be detected anymore by the computer) and there is no way to recover it.
Here are the files from Qmobile Noir A6 Shared By cellappfreak
Preloader.img
recovery.img
boot.img
logo.img
uboot.img
ebr1.img
ebr2.img
mbr.img
Downlod Dump Files :
http://d-h.st/AO3
http://d-h.st/Z3C
http://www.mediafire.com/?vaq8mrcsq9gszk4
to much !!!!
UMAIR_ARSHAD said:
Keeping a backup of current working condition of your Android phone is always a must if you play around with your phone
The ROM backup that you will obtain can be flashed any time using SP Flash Tool and your phone will be restored to the condition in which it was when you dumped the ROM. Since rooting is must before dumping ROM, if you flash it again you will still have root.
Please note that you need root permissions to perform the dumping procedure. So don’t try it if your phone is not rooted! Also make sure you have enough space on SD Card as this will store the backup to “backup_v2″ folder on SD card.
Steps to Backup ROM
Download this file and extract. You will get a folder “gscript”. In that you will find another folder “bin“, and two files: “back_mt6575_a4_v2d.sh” and “GScriptLite.apk”
Open GSript Lite.
Go to options and select "Add script"
Tick on "Needs SU"..and Press "Load file"
Select Your Scrtipt file and press "add".
Then You will see your script file at bottom just tap on it.
Process of Back up will start Do not press any key until the progress ends.
Now Your backup is completed and should be saved to /mnt/sdcard2/backup_v2.
This Backup can be restored by two methods
1. CWM recovery
2. SP flashtools.
How to Restore VIA CWM Recovery.
CWM recovery for Micromax A68 and Qmobile noir A6 is already posted by me. Download it from this thread
Turn off your phone and start it in recovery mode by pressing volume UP + volume down + power button.
Choose wipe data/factory reset
Go to advanced -> wipe dalvik cache.
Go back again. -> mounts and storage -> format /system
Go back to main menu -> backup and restore -> advanced restore -> restore /system. Choose the folder “BDRS-2013-xx-xx”
Select system image and Confirm it.
Restart the phone. You should have a working and stable Phone
Click to expand...
Click to collapse
borng dude.... nd also heavy.. post smtng easyest day.
Can u tell me dear how it is boring?
Sent from my A6 using xda premium
Nice tutorial and Thanks for sharing with us
Thanks dear.
Sent from my A6 using xda premium
UMAIR_ARSHAD said:
Keeping a backup of current working condition of your Android phone is always a must if you play around with your phone
The ROM backup that you will obtain can be flashed any time using SP Flash Tool and your phone will be restored to the condition in which it was when you dumped the ROM. Since rooting is must before dumping ROM, if you flash it again you will still have root.
Please note that you need root permissions to perform the dumping procedure. So don’t try it if your phone is not rooted! Also make sure you have enough space on SD Card as this will store the backup to “backup_v2″ folder on SD card.
Steps to Backup ROM
Download this file and extract. You will get a folder “gscript”. In that you will find another folder “bin“, and two files: “back_mt6575_a4_v2d.sh” and “GScriptLite.apk”
Open GSript Lite.
Go to options and select "Add script"
Tick on "Needs SU"..and Press "Load file"
Select Your Scrtipt file and press "add".
Then You will see your script file at bottom just tap on it.
Process of Back up will start Do not press any key until the progress ends.
Now Your backup is completed and should be saved to /mnt/sdcard2/backup_v2.
This Backup can be restored by two methods
1. CWM recovery
2. SP flashtools.
How to Restore VIA CWM Recovery.
CWM recovery for Micromax A68 and Qmobile noir A6 is already posted by me. Download it from this thread
Turn off your phone and start it in recovery mode by pressing volume UP + volume down + power button.
Choose wipe data/factory reset
Go to advanced -> wipe dalvik cache.
Go back again. -> mounts and storage -> format /system
Go back to main menu -> backup and restore -> advanced restore -> restore /system. Choose the folder “BDRS-2013-xx-xx”
Select system image and Confirm it.
Restart the phone. You should have a working and stable Phone
For Hard Bricked Phones
What's needed:
USB data cable
MediaTek USB VCOM drivers
SP Flash Tool Download ( Latest version SP_Flash_Tool_v3.1224.01)
First of all, make sure that you have MediaTek DA USB VCOM drivers installed.
Flashing only part of the ROM
In case you want to flash just one part of the ROM, that is also possible. In the shown example, only recovery image will be flashed.
Deselect all parts except the one(s) you want to flash and then press F9 (or hit Download button).
The tool will immediately show a warning because not all parts are selected, but you should continue anyway. Safely press Yes to continue.
The download of the chosen partition image will start and after the yellow bar is complete, the popup with the green circle should appear.
Please note that, even though it isn't mandatory to select it on the list of images to flash,
preloader file must be present in the same folder as the other partition(s) that you want to flash, or else phone will not be able to enter into download mode
Attention: Please follow the instructions carefully. I will not take any responsibility on whatever may happen with your phone.
Very important warning: Always make sure that you trust the sources of the ROM you download and know that it is meant for your phone.
After flashing a wrong preloader, your phone will be completely dead (can't be powered on, it will not charge and won't be detected anymore by the computer) and there is no way to recover it.
Click to expand...
Click to collapse
pls help me with the sp tool i m unable to understand it n my a68 is bricked without CWM so pls help me n also how to go in download mode
tried this and bricked my device already. cant even boot on recovery. when i go to Memory Test, it gives error that it cant find External Ram.
can u provide me the download link of backup?
jompha said:
tried this and bricked my device already. cant even boot on recovery. when i go to Memory Test, it gives error that it cant find External Ram.
can u provide me the download link of backup?
Click to expand...
Click to collapse
Go to my signature: Micromax A68
prasad12ka4 said:
Go to my signature: Micromax A68
Click to expand...
Click to collapse
sorry. my device is not Micromax A86 or Symphony W60.
Its Symphony W20 with MT6575 Processor. 256MB RAM, 3.5", 512ROM, 2MP Cam
from where can i download drivers???
---------- Post added at 04:41 PM ---------- Previous post was at 04:37 PM ----------
i meant the mediatek vcom drivers....from where can i download it???
i need help
a i dont noe to load file when i go to app and hit create new script and then types the name and then i hit load file it shows that plz select the .sh file i need ur help man.
noir a6 messed up ROM
UMAIR_ARSHAD said:
Can u tell me dear how it is boring?
Sent from my A6 using xda premium
Click to expand...
Click to collapse
umair plz provide me with the scatter file of noir a6 because my ROM is completely messed up! if u can just provide me with a link even thats fine i just want the scatter file!
wait. i will provide u whithin 24 hours.
Sent from my IM-A830L using xda premium
PRELOADER 0x0
{
}
DSP_BL 0x40000
{
}
MBR 0x600000
{
}
EBR1 0x604000
{
}
__NODL_PMT 0x660000
{
}
NVRAM 0xa60000
{
}
__NODL_SECCFG 0xd60000
{
}
UBOOT 0xd80000
{
}
BOOTIMG 0xde0000
{
}
RECOVERY 0x13e0000
{
}
SEC_RO 0x19e0000
{
}
__NODL_MISC 0x1fe0000
{
}
LOGO 0x2040000
{
}
__NODL_EXPDB 0x2340000
{
}
EBR2 0x23e0000
{
}
ANDROID 0x23e4000
{
}
CACHE 0x224e4000
{
}
USRDATA 0x425e4000
{
}
__NODL_FAT 0x626e4000
{
}
__NODL_BMTPOOL 0xffff0050
{
}
Sent from my IM-A830L using xda premium
this the scatter file of a6 .copy the text into notepad ++ and save it as .txt file
Sent from my IM-A830L using xda premium
Reply
UMAIR_ARSHAD said:
this the scatter file of a6 .copy the text into notepad ++ and save it as .txt file
Sent from my IM-A830L using xda premium
Click to expand...
Click to collapse
Thank YOu Very Much umair
UMAIR_ARSHAD said:
Keeping a backup of current working condition of your Android phone is always a must if you play around with your phone
The ROM backup that you will obtain can be flashed any time using SP Flash Tool and your phone will be restored to the condition in which it was when you dumped the ROM. Since rooting is must before dumping ROM, if you flash it again you will still have root.
Please note that you need root permissions to perform the dumping procedure. So don’t try it if your phone is not rooted! Also make sure you have enough space on SD Card as this will store the backup to “backup_v2″ folder on SD card.
Steps to Backup ROM
Download this file and extract. You will get a folder “gscript”. In that you will find another folder “bin“, and two files: “back_mt6575_a4_v2d.sh” and “GScriptLite.apk”
Open GSript Lite.
Go to options and select "Add script"
Tick on "Needs SU"..and Press "Load file"
Select Your Scrtipt file and press "add".
Then You will see your script file at bottom just tap on it.
Process of Back up will start Do not press any key until the progress ends.
Now Your backup is completed and should be saved to /mnt/sdcard2/backup_v2.
This Backup can be restored by two methods
1. CWM recovery
2. SP flashtools.
How to Restore VIA CWM Recovery.
CWM recovery for Micromax A68 and Qmobile noir A6 is already posted by me. Download it from this thread
Turn off your phone and start it in recovery mode by pressing volume UP + volume down + power button.
Choose wipe data/factory reset
Go to advanced -> wipe dalvik cache.
Go back again. -> mounts and storage -> format /system
Go back to main menu -> backup and restore -> advanced restore -> restore /system. Choose the folder “BDRS-2013-xx-xx”
Select system image and Confirm it.
Restart the phone. You should have a working and stable Phone
For Hard Bricked Phones
What's needed:
USB data cable
MediaTek USB VCOM drivers
SP Flash Tool Download ( Latest version SP_Flash_Tool_v3.1224.01)
First of all, make sure that you have MediaTek DA USB VCOM drivers installed.
Flashing only part of the ROM
In case you want to flash just one part of the ROM, that is also possible. In the shown example, only recovery image will be flashed.
Deselect all parts except the one(s) you want to flash and then press F9 (or hit Download button).
The tool will immediately show a warning because not all parts are selected, but you should continue anyway. Safely press Yes to continue.
The download of the chosen partition image will start and after the yellow bar is complete, the popup with the green circle should appear.
Please note that, even though it isn't mandatory to select it on the list of images to flash,
preloader file must be present in the same folder as the other partition(s) that you want to flash, or else phone will not be able to enter into download mode
Attention: Please follow the instructions carefully. I will not take any responsibility on whatever may happen with your phone.
Very important warning: Always make sure that you trust the sources of the ROM you download and know that it is meant for your phone.
After flashing a wrong preloader, your phone will be completely dead (can't be powered on, it will not charge and won't be detected anymore by the computer) and there is no way to recover it.
Click to expand...
Click to collapse
I hard bricked my phone even I uploaded wrong pre loader my A6 was not booting, nor charging, even not detected by computer, I thought I have lost my phone, luckily it was under warranty, I went to Q shop gave them my phone and they repaired it, wow thanks to Qmobile there is a way those who have still warranty left can have the phone back in working condition, goto Qmobile they will do.
I will request you if anyone can please provide the dump of Qmobile A6 reason i bricked my phone i didnt find the dump of A6 stock rom and used wrong preloader of Micromax A68.
Stock Dump
cellappfreak said:
I hard bricked my phone even I uploaded wrong pre loader my A6 was not booting, nor charging, even not detected by computer, I thought I have lost my phone, luckily it was under warranty, I went to Q shop gave them my phone and they repaired it, wow thanks to Qmobile there is a way those who have still warranty left can have the phone back in working condition, goto Qmobile they will do.
I will request you if anyone can please provide the dump of Qmobile A6 reason i bricked my phone i didnt find the dump of A6 stock rom and used wrong preloader of Micromax A68.
Click to expand...
Click to collapse
I have an A6 but i cant provide with stock dump because
1. M not using Stock ROM! i am using iMjelly ROM for a6! (u can find on google " iMjelly ROM " )
2. mjh se ye script nae chal rahi! so i cant create a dump!
Img files to unbrick Qmobile A6
Here are the files from My Qmobile Noir A6
Preloader.img
recovery.img
boot.img
logo.img
uboot.img
ebr1.img
ebr2.img
mbr.img
here are the download links
http://d-h.st/AO3
http://d-h.st/Z3C
http://www.mediafire.com/?vaq8mrcsq9gszk4
I hard bricked my A6 and was unable to find these files especially preloader to unbrick my phone, now, its for u all unbrick ur A6
If it helps anyone dont forget to click on thanks
very nice work....
Hi all ! I have a big bug with the Nokia XL ,RM-1030 , Product Code: 059W166, FW: RM1030_059W166_1.2.3.21_025
Flashed and tested/connected with 2 others computers running windows 7 ..
I really need your help ..
3 days ago, after having root, I installed by error an fake application, this one have patched/bricked my android (message in top of the screen “patching android.. 35%.. to 100%”. ), since the phone starts again when I want to install/modify something .. Not having buttons volumes/power, I use Nokia X To manage for reboot bootloader/fastboot. ALL is restored with the restarting! Same if I make a wipe, to erase with root to explore, to change the permissions, to test CWM and TWRP,
I cannot flash a .zip, I have to test Re-root, un-root, but always similar. I have wipe 3x with TWRP: nothing changes. I have flashed 3x with nokia X flash, flash 3x with Nokia Care + package manager, refurbish, recover, always similar, the phone reloads his “save”. ADB functions perfectly, fastboot functions once on two, I succeeded has to make: fastboot - I 0x0421 erase data.img and more (from goo . gl / vOo2Ni)
I cannot WIPE since the original recovery because the buttons do not function any more
Flashed new firmware : 059V6Q0 ; Flashed with Software Product Tool for Store - Nokia Care Suite 5.0, W/O errors, but phone say in the settings menu of the phone : Product Code : 059W166 .. so flash doesn't worked..
Thank you to have read me and i'm sorry for my bad English, I used google translation..
(ADB LogCat : bit . ly / 1CL24Tb )
(Informations about the phone in Nokia Care : bit.ly / 1CRLFwa )
(flash without any errors : prntscr . com / 7usnle )
(second flash firmware w/o any errors : prntscr . com / 7utub1 )
( Wipe Fastboot : fastboot -i 0x0421 -w : prntscr . com / 7vaqg6 )
Crayn said:
Hi all ! I have a big bug with the Nokia XL ,RM-1030 , Product Code: 059W166, FW: RM1030_059W166_1.2.3.21_025
Flashed and tested/connected with 2 others computers running windows 7 ..
I really need your help ..
3 days ago, after having root, I installed by error an fake application, this one have patched/bricked my android (message in top of the screen “patching android.. 35%.. to 100%”. ), since the phone starts again when I want to install/modify something .. Not having buttons volumes/power, I use Nokia X To manage for reboot bootloader/fastboot. ALL is restored with the restarting! Same if I make a wipe, to erase with root to explore, to change the permissions, to test CWM and TWRP,
I cannot flash a .zip, I have to test Re-root, un-root, but always similar. I have wipe 3x with TWRP: nothing changes. I have flashed 3x with nokia X flash, flash 3x with Nokia Care + package manager, refurbish, recover, always similar, the phone reloads his “save”. ADB functions perfectly, fastboot functions once on two, I succeeded has to make: fastboot - I 0x0421 erase data.img and more (from goo . gl / vOo2Ni)
I cannot WIPE since the original recovery because the buttons do not function any more
Flashed new firmware : 059V6Q0 ; Flashed with Software Product Tool for Store - Nokia Care Suite 5.0, W/O errors, but phone say in the settings menu of the phone : Product Code : 059W166 .. so flash doesn't worked..
Thank you to have read me and i'm sorry for my bad English, I used google translation..
(ADB LogCat : bit . ly / 1CL24Tb )
(Informations about the phone in Nokia Care : bit.ly / 1CRLFwa )
(flash without any errors : prntscr . com / 7usnle )
(second flash firmware w/o any errors : prntscr . com / 7utub1 )
Click to expand...
Click to collapse
UP : Anyone ?
I Have Micromax Canvas AQ4501 (4GB)
Ive Tried All Possible Ways My Phone Not Booting Up:crying:
I Cant Even Start My Phone So No Question Of Booting In FastBoot Mode & Flashing A Rom,
its Good As Dead…!
Power Button Is OK As Was Flashing A Sprout 8GB Version Rom Unknowingly (Afterwards I Realised And Regretted)
I'm Out Of Warranty 1 Month Before (1year+1Month Passed)
I Tried Every Option & Combination On Sp Flash Tool Tried Manual Format Yesterday
But Of No Use…!
1) Tried "Download Only"
2) Gone To Format Section "Format Everything Except Bootloader" Then "Download Only"
3) Formated all + Download
ALL THESE SAYS DOWNLOAD SUCCESSFUL AND THAT "RIGHT" Popups
Now,
4) Tried Firmware Upgrade (After Going To Format Tab And Format All Except Bootloader)
A Strange ERROR Pops Up "PMT Info"
I Researched That ERROR "PMT Info"
Its When Partition Value Storer File Has Been Altered By Chanhe In Partition Value
So The Solution Online Was Given To "Format All" -> Download Only Preloader -> Then Flash All The Files
So… In The End I Know
1)My Preloader Is Currupt
2)Power Button Is As Good As On A New Device
3)i Dont Have Knowledge About How To I Format "Preloader" By Manual Format Option In The Sp Flash Tool, To Remove That Currupt Preloader From The Phone And Insert A New One Using Sp Flash Tool
I Think Formatting My Phone With Sprout 8GB Version Scatter File Will Solve My Problem…
THANK YOU If You Guys Read so Far… Now You Know What I Know, And what I Dont Know So… Waiting Eagerly For Your Guys Reply!
Please Help Me Get Out Of This Situation!
Hey Guys,
After following all the steps properly with caution i was able to make the stock rom in a CWM recoverable file
I AM NOT RESPONSIBLE FOR ANY DAMAGES MADE TO YOUR DEVICE IF YOU MAKE A MISTAKE IN BETWEEN
BUT I WILL ASSURE YOU THAT I WILL TRY MY BEST TO HELP YOU
This are the files that were backed up , just check to be sure you have all files in the folder / zip
~ System . ext4 . tar
~ Recovery . img
~ uboot . img
~ Boot . img
~ nandroid.md5
TUTORIAL
Step 1 : Unlock Bootloader to flash CWM / TWRP recovery
GUIDE : UNLOCK BOOTLOADER
RECOVERY : DOWNLOAD
I DID NOT MAKE THE FILES TO UNLOCK BOOTLOADER : EVERYTHING WAS DONE BY :
SALMAN986 AND PRIYANSH21
I recommend using cwm
STEP 2 : Extract the stock rom to CLOKWORKMOD/PHILZ/TWRP in sdcard/sdcard1
IF YOU CANT FIND THIS FOLDER > YOU CAN BACKUP YOUR ROM AND CANCEL IN BETWEEN SO THE FOLDER IS CREATED AUTOMATICALLY
STEP 3 : select restore or advance restore
VOILA - The stock rom will be restored
WITH ROOT (KINGROOT) AND BUSYBOX
IF YOUR DATA IS NOT INTACT / PHONE DOESNT REBOOT , CLEAR DATA & CACHE FROM RECOVERY
BE SURE TO LIKE MY WORK , AND HIT THE THANKS BUTTON
MAIN CONTRIBUTORS:
SALMAN986
PRIYANSH21
PLEASE LIKE THEIR WORK TOOO , WITHOUT THEM WE COULD NOT HAVE THE TAIWAN STOCK ROM FOR OUR DEVICE
DOWNLOAD STOCK ROM HERE:
MEGA
Hey, you can do as follows:
~~~~~~~~~~~~~~~~~~~~~~~
Requirements:
* PC
* CWM/TWRP Backup
* CWM/TWRP Installed
* Winrar/7Zip
* Brain
Now the real-deal..
1. Copy the backup from Phone to PC
2. Extract system.ext4.tar file with winrar/7zip, you
will get the system folder
3. Collect the boot.img from the backup
4. Now collect a META-INF folder from any custom
rom/small update zip which is made for HTC Desire 526G+
5. Now select META-INF,system & boot.img, click
right button of your mouse and select 'Add to archive'
now select archive format 'ZIP' and press ok
6. Your flasable zip rom is ready. Just copy it
to your sd card and flash with CWM or TWRP
7. Done!! This will flash the stock Taiwan System to your device.
Make sure to hit the thanks button!!
P.S. Can you give the link for Indian Stock ROM.
Thanks.. i followed the procedure suggested by you. Really it is working. Is there any possibility to edit the source code and (As per my customization) compile, generating the images and flashing back. If yes which cross compile tool is required and how to get source code.
Philz touch recovery download for STEP 1 , Instead of using CWM / TWRP
Mega
Guide for Install TWRP & Root Moto_C_Plus With Locked Bootloader
I have ported TWRP recovery for Moto C Plus
TWRP porting guide followed on xda [thanks for xda]
Code:
Follow instruction correctly..try at your own risk..i'm not responsible for if your device bricked..
Here is the step by step procedure for install twrp recovery on moto c plus with locked bootloader
Instructions:-The simple way to install twrp recovery on devices,, is to unlock the bootloader..and flash the recovery through fastboot..
I'm going to show you step by step instructions to flash the twrp on moto c plus WITHOUT unlocking the bootloader or lose any data.
1. first thing u need to some files..
Download and extract my ported recovery & files from here Tools NEW G-DRIVE LINK UPDATED!!!
Code:
[I][FONT="Times New Roman"][COLOR="Red"][SIZE="4"]note:[/SIZE][/COLOR][/FONT][/I]after dowloading file..
extract it and copy [I]SuperSU-v2.82-201705271822.zip[/I] file in ur sd card,,,,
DONT FORGET to flash SuperSU-v2.82-201705271822.zip file
after write memory ,,otherwise your device will stuck at
moto logo or soft brick
2.Open download tool(file provided in the above link,use provide sp_flash tool only because moto c plus have secure chip,need to authentication file,, so u cant flash through normal sp_flash tool) and load the download agent "MTK_AllInOne_DA.bin" & authentication file auth_sv5.auth from download_tool folder
3.Load the scatter-file found in the provided file.. select preloader only..but don't flash it.
4. Click Alt + Ctrl + V to activate advanced mode in sp flash tool.
5.Click on "window" up there and select "write mode"
6. Change the Begin address to "0x2d80000" and click on "file path" and choose the TWRP RECOVERY.img from extracted provided zip file
7. Click on "write Memeory", then Power off your device and remove the battery.. press and hold vol- button, then connect phone to pc via USB cable.. press &hold vol- key until pc detect...wait for Write memory ok window appears,, now your recovery is ready.
8.Next insert ur battery, press vol+ and power button simultaneously.. than select recovery mode..& boot into recovery
9.In twrp recovery select install and locate SuperSU-v2.82-201705271822.zip file in ur sd card and flash it..
10.After successful flash... hit reboot device..
!!!NOW YOU ARE ROOTED MOTO C PLUS!!!! Enjoy!!!!:good::good:
...Image Instruction are also available in attached file..
For Compiled twrp go here Compiled Twrp
XDA-DevDB Information
TWRP For Moto C Plus with locked bootloader. Tool/Utility for all devices MT67xx
Contributor:
shr!pad
Created:13-12-2017
Last Update:02-05-2018
If u like my work, hit like button....
In ticked preloader , wut can I choose Broo.. ( TWRP RECOVERY.img ) ,??????
---------- Post added at 11:37 AM ---------- Previous post was at 11:32 AM ----------
Any Mtk Drivers Needed for pc to detact phone ????
u dont need to add twrp recovery in download section..u need to select twrp recovery in write memory...see in attached images..
Yes..u need mtk vcom drivers for detect phone..
I get this error
S_FT_ENABLE_DRAM_FAIL (0xFC0)
[EMI] Enable DRAM Failed!
[HINT] Please check your load matches to your target which is to be downloaded.
check..image instruction.. All files must be loaded..
And check u r enterd beginning adress 0x2d80000 is correct..
See instruction correctly..i think u r problem..in connecting phone...
Read instruction again..said that..press and hold vol- key then connect usb to phone..hold vol- key untill write memory ok window appears..?
Welcome
u dont need to add twrp recovery in download section..u need to select twrp recovery in write memory...see in attached images..
Yes..u need mtk vcom drivers for detect phone..
I double checked evey file and the begin adress, and i remove the battery hold vol - and connect the phone until in the status shows write memory but getting the same error in my 1+16gb
In the note section, u have mention flash SuperSU-v2.82-201705271822.zip file after write memory, this has to be done in the 9th step??
Yes..that to be done in 9th step
Yes..that to be done in 9th step
check that, r u installed vcom drivers correctly....is required for detect u r device..
Bro , TWRP successfully flashed but after flashing TWRP my moto c plus was not booting up strucking on MOTO LOGO ( I again flashed full firmware for use my phone )
Thanks for your work. I'm getting the Dram error as well.
Have double checked all the steps, using supplied cable and tried different ports on the PC.
My device is XT1723. Could it be that this version of TWRP is not correct for my device?
Kindly give proper credit
work on Xt1726 too?
After several unsuccessful attempts on XT1726, this method does not work... But, thank you for your hard work!
u need to flash super su file.. after writing the recovery provided in link.. otherwise u will bricked..read 9th step,,,,it's the problem u have facing
it's correct twrp.. i think ur problem..in drivers,, first install vcom drivers for detect the phone..
yes..thank you.. u need to first install usb vcom drivers for detect phone...