Develop Bugs

Rooting the Alllview P6 (dual sim) phone and much more!

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
!!!! UPDATE !!!
also working for
P6 Stony Quad
​
[Devices: Allview P6 (Stony), Allview P6 Quad (new) /A]
This thread will discuss the following topics:
1- How to backup and restore your user data [ready]
2 -A a guide How to root the Allview P6 [ready]
3- how to make a full system backup and restore of a rooted phone
4- how to run programs that recognized that your device is rooted
5- how to disable or delelete system applications
6- how to use an alternative launcher
7- how to use an alternative phone dialer
8- how to completely restore factory settings using a stock image from Allview
9- ADB
10- setup dual sim
11 - reset from frozen state
12- factory mode (hold the volme down button and the powerbutton)
[UNDER CONSTRUCTION]
update --20-1-2013
Please be patient. I don't have much time to spend building this thread but I WILL write down all the promised points. starting by 1
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------​​
1- How to backup and restore your user data
(if applicable unlock klick once on the power button to get it from standby and unlock the screen by swiping the middel circle.)
- press and hold the powerbutton on the left side of the phone
untill a screen appear that let's you choose to power off te phone.
- you will know the phone is truly turned off when you hear or feel a final short vibration
- now, press and hold the volume UP button on the right side off the phone and at the same time press and hold the powerbutton.
- Wait until a logo from Allview appears. at that time you can let go.
The following recovery screen will appear:
use the volumeUP and volumeDOWN keys on the right side of the phone to choose "backup userdata"
once selected press the powerbutton on the lef side of the phone.
a screen will appear and a green bar will show the progress. please be patient, this can take a while
after the backup has completed you will return to the recovery screen. you can then use the volumeUP and volumeDOWN on the right side of the phone to scroll to "reboot phone" and you will return to normal modus. that's it. your done. You now have a backup of your userdata. it will be placed in the root of the SDCARD that is in your phone.
You can use the same procedure to restore it.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
2-A a guide How to root the Allview P6
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1- Use the following Guide by Bin4ry
----------------------------------------------------------
Bin4ry THANK YOU for that post
---------------------------------------------------------
!!!!ATTENTION!!!
rooting will NOT work if:
- you do not have USB debugging enabled
- do not have allow installation from fake places enabled
- have downloaded a superuser app
I will show the spefiic steps and results for the Allview P6
- download the zip file needed at the top of the post
- extract the zip file
- now, make sure your phone is in USB debugging mode
- goto settings, developer settings and enable usb debugging
- now connect the phone with a usb cable to the computer
- now, goto the unzipped file and double-click "runme.bat"
- make sure your phone is on, and unlocked (screensaver lock)
- choose 1 for a normal procedure
if everything went well the following screen will appear:
- a screen will apear on your phone
- dot NOT enter any password
- choose restore my data
- after a while a message will appear quickly and dissappear as quickly saying "restoration finished". the screen will close.
- the phone looks in normal mode
- now wait for the phone to restart (it will!)
- after it restarts, before it comes into normal mode it will say briefly "upgrading android"
- once the phone is restarted you will see and extra icon "super user"
- if you now download a program requering root accesss a box will appear letting you choose to allow the program root acccess. once or always or to deny.

Allview p6 stony
Thx for the trick.
This phone is a good one but can be even better if we can get some cooked 4.1 or 4.2 roms.:good:

allview p6
Thanks for this thread.Very useful instructions .looking forward to your upcoming posts.good job. thanks

Just wanted to say thanks for helping me root my P6.
It worked just as you described.
Only had one issue. My windows 8 system did not have the ADB drivers installed for the script.
I googled that and after I got the drivers it worked fine.
Looking forward to any updates on this post.

can u please continue this thread ??

Is there any chance this phone will ever get an update to Android 4.1?

alguem sabe onde consigo a rom desse aparelho, ziquei o meu e agora ele nao funciona a rede. como farei agora?
Anyone know where I can get the rom this handset, ziquei mine and now it does not work the network. how do now?

update tot 4.1 for P6 Stony
dutchguy said:
Is there any chance this phone will ever get an update to Android 4.1?
Click to expand...
Click to collapse
right now, there is an official update from Allview op there site allview.nl/toestellen/allview-p6-stony/update/
no Jelly Bean yet, sorry.

continue thread
ZecaR said:
can u please continue this thread ??
Click to expand...
Click to collapse
I'm sorry you are quite right. I WILL do so. please be patient.

great that works with Allview P6

Allview P5 Qmax
Hi, anyone knows how to do root at Allview p5 Qmax? Thanks.

Hi all,
I have the Allview P6 stony myself. What I miss on this phone is the option to associate contacts to a SIM. I've been searching all over to find a solution for it. So far without luck. Thats too bad, because the quad version of the phone has this option integrated. I want to share my findings here, hoping anybody else can benefit from what I found so far.
This phone is sold all over the world with different names. The dual core version is know as:
Allview P6 Stony (Romania and the Netherlands)
Fly IQ 444 (Russian)
Blu Vivo 4.65 (american, has two versions based and band)
NGM We Move Legend XL (Italian)
There is also a Quad core version with jelly bean and the associate contact to SIM function ...
Gionee Dream D1 (Chinese)
Allview P6 Quad (Romania and the Netherlands)
Walton Primo X1 (Indian)
Nice detail: The Italian version has the function I need (associate contact to SIM, but I can't find it's ROM anywhere and their support department wouldn't give it to me)
As a new user I am not allowed to post links to the firmware I found so far but... :angel:
For the Fly IQ444 there is official and rooted firmware on 4pda.ru
with extension /forum/index.php?showtopic=415423
For the Allview P6 the firmware is on ther website allviewmobile dot com with extension com/fileadmin/p6_update/Allview_Update_P6_17012013.zip
For the Walton prima the firmware and update software is on some unknown site hellomobilecms.blogspot dot nl
with extension nl/2013/05/walton-android-primo-series-phone.html (google how to use...)
Now that I did my part in sharing.. I still have these questions.
Can I flash my dual core version of this phone with the quad core version firmware, or will that "brick"it?
Can anybody get his or her hands on the Italian firmware ?
Is there any other option to get this "associate contact to SIM" function working?
EDIT: The app "SIM selector" from th eplay store adds associate contact (number) to SIM functionality

How to add CWM recovery for Allview P6
Hi All,
I am still new to this, so perform at your own risk :laugh:
Here is my How to add CWM recovery to your Allview P6.
First I need to say some thanks
OP here on XDA for telling how to root the Allview P6
Hohol on 4PDA.ru He posted the CWM for the Fly IQ444, I only edited his work so it was compatible with the original Allview P6 update
michfood here on XDA for explaining how to edit a recovery image and provide the tools to make it easy.
Ok so I said my thanks, here we go (on your own risk)
Root your Allview P6 (but since you are reading this in as a reply to OP's post I guess you allready did that
Download and install Mobileuncle tools from the play store. Watch out here, this tool can make you flash the wrong boot image!! so follow my instructions carefully
Download the recovery image for Allview P6 I created based on Hohol's recovery for Fly IQ444. (attached to this post)
Put the recovery image on your SD card (not in a sub folder, directly in the SD card root)
Start mobile uncletools en go to Recovery Update
Select the recoveryalvw.img file en go ahead, flash it :silly:
The file should be the first option available, if not it's probably on the wrong location
Now if you reboot in recovery you will have CWM available for backups and flashing of ROMS (And yeah, only Roms I found I allready posted above)
With this option I wass able to
Backup my Allview P6 Rom and Data
Flash Hohol's IQ444 CWM rom on my Allview
Restore the original Allview P6 update from Allview's website
Final note: I don't have the original Allview P6 recovery image, so once this is done, you can't go back. But that only matters for your warrenty and you allready broke that by rooting your phone Actually restoring the Allview original update did also restore my recovery image to it's original AND it unrooted my phone. Nice for warranty...:angel: less nice for me here I go unrooting again :silly:
Extra final note: Now I only need the NGM We Move Legend XL rom so I can flash that on my Allview... anybody?

It works

I have solved the problem and now have CWM on my p6 quad

spit85 said:
I have solved the problem and now have CWM on my p6 quad
Click to expand...
Click to collapse
So how did you solve it?

Do you want a other recovery on your phone, a other then the stock firmware.
You can use CWM or TWRP (TWRP is a full touch recovery)
Expand your internal memory from the phone to 2.5 GB
How to flash the recovery
You can use Mobileuncle MTK Tools, to download by Google Play Store
- Rename the downloaded recovery image to recovery and place it on the root from you sdcard-
- Start MobileUncle Tools (your phone must be rooted).
- Go to the tab recovery update.
- Now you will see the recovery.img file, chose it.
- It will prompt if you want to flash it, and after it will ask to reboot in recovery.
- now you have the flashed recovery on your phone
The other way is to flash it with SP Flash Tool (to download in the attachment files below " SP Flash Tool v3.1328.0.183.zip")
Download the attachment and unpack it.
- Open the program to double click on Flash_tool.exe
- Open the scatter file for you phone (the scatter file for the Allview p6 Quad is in the folder Allview; named "MT6589_Android_scatter_emmc_PMT"). If don't have a scatter file, create one for you phone.
- now double click on "recovery" and select the downloaded recovery image.
- be sure you only selected the recovery check box, not the other check boxes.
- select download, but not "firmware->upgrade", because you will brick you phone. So only choose "download"
- now power down you phone and wait until it is fully shutdown, then connect your phone to your computer with the usb cable.
Note that you have first to install the adb drivers and the USB VCOM drivers, other wise you cant use SP Flash Tool.
You can download the drivers also in the attachment files ("SP_Flash_Tool_drivers.zip"), and i assume that you know how to install a driver on your computer.
The best way to install the drivers for your phone is the shutdown the phone and press the volume down button, hold it, and press the power button, until the phone go's on. You will see a screen with factory settings, ore something like that, but that doesn't matter. If you now connect your phone two your computer it will find to new devices. Use the drivers in the attachment file to install the drivers on your computer.
Do it on your one risk! I'm not responsible for any brick!
How to root the Allview P6 Quad
- Download the attachment "motochopper.zip" and unpack it.
- Enable usb debug mode on your phone and connect your phone to the computer.
- Click on "Run" in the unzipped folder and follow the instructions, and after that your phone is rooted.
If your phone reboots, you will see the superuser app from clockworkmod. Don't uninstall it and install a other superuser APK, because a other superuser app doesn't work, only the clockworkmod superuser app.
Another way is to use UnlockRoot. Download it here and chose the free version.
- First root your phone with motochopper, before you use UnlockRoot, otherwise it doesn't work.
- Install and open UnlockRoot.
- Connect your phone to your computer (with USB debug on).
- Click on "Root" and wait a moment, until there is a popup where you can choose your phone; choose it.
- UnlockRoot will say that your phone is already rooted, and if you want to root it again. Choose yes.
- After it is rooted you will be ask to install some other app, but you can refuse it, then your phone will reboot.
- After the phone is rebooted, open UnlockRoot again and click on "Unroot".
- Wait until your phone is unrooted.
- Uninstall the superuser app from clockworkmod
- Install SuperSu from Chainfire, download it in google play, here
- After your phone is unrooted and you installed SuperSu, open UnlockRoot again and choose "Root", and again there will be a popup where you can choose your phone; choose it.
- Follow the instructions, and after your phone reboots, your phone is rooted correctly, and you can also choose other superuser apps, but first uninstall always the old superuser app if you want to install another.
I have no idea why it must go this way, but that was the only way for me to root my phone right, so i can install SuperSu.
Edit: new CWM V6.0.3.2
I ported a newer CWM version from HBB (V6.0.3.2) to the Allview p6 quad, with some more futures in it:
- dual sdcard mounting
- install zip from sideload (ADB)
- partition sdcard and partition internal sdcard
If you want to give it a try, download attachment "CWM_V6.0.3.2_allview_p6_quad.img" and flash it to your phone.
Do it on your one risk! I'm not responsible for any brick!
Edit: TWRP V2.4.4.0 for p6 stony and p6 quad
I have ported TWRP V.2.4.4.0 (Team Win Recovery Project), for both models, the p6 quad and the p6 stony. But i haven't tested it for the p6 stony, because i only have a p6 quad. But Salvolin confirmed it works on his P6 Stony.
I'm also try to port TWRP V.2.5.0.0, but the recovery gets to big to flash, so i try to solve that to get a other layout with pictures in it that have not so much kb. At the moment SP Flash Tool cant make the recovery bigger if i edit the scatter file, then there is a strange error, so i have to wait of e newer version from SP Flash Tools. But for me TWRP is a good recovery, because its full touch.
You cant restore CWM backups with TWRP, or TWRP backups with CWM
The only way to convert your CWM recovery to a TWRP is:
- Flash CWM and restore the backup.
- Flash TWRP and backup
- Flash CWM and restore another backup
- Flash TWRP and backup.
If you have 10 backups from CWM, and you want them all converted to TWRP, you must flash a few times between the recovery's.
For the P6 Quad, download attachment "twrp_2.4.4.0.img"
For the P6 Stony, download attachment "TWRP_v2.4.4.0_Allview_p6_stony.img"
Do it on your one risk! I'm not responsible for any brick!
How to expand the internal Storage to 2.5 Gb for the Allview P6 Quad.
This patch is only for the Allview P6 Quad, not the Stony.
First you make a backup from your phone with CWM or TWRP.
Download the attachments 'Allview_P6_Quad_2.5GB_internal.zip' and unzip it. Load the scatter file in Sp Flashtool. If everything is correct, you only see EBR1 and EBR2 selected.
Then hit the Download button, not the firmware upgrade button! If you download it to the phone, go into the recovery and do a factory reset.
Now you can place your backup back and reboot your phone. Now you have a 2.5 GB internal partition, instead a 1 GB partition.
The internal SD is now 300 MB.

:laugh:

Is there a way to flash a stock Android rom on this phone?

forza11 said:
Is there a way to flash a stock Android rom on this phone?
Click to expand...
Click to collapse
I flashed between the Fly IQ444 rom and the allview P6 one
But now I bricked it with a THW 5 or something rom :crying:

Htc desire sv

HTC DESIRE SV FORUM:
This forum has been created for HTC Desire SV mobile users
This will help you in rooting , unroooting , unlocking boot loader , installing stock,custom rom , swapping memory , etc with htc desire sv
Unlocking boot loader and Rooting:
Post #2
Custom Rom:
Post #3
Common Questions and their answers:
Post #4
Getting back to mobile purchased:
Installing stock rom
Re-Swapping memory
Delete Superuser app
Re-lock bootloader
Post #5
Updates:
Swapping Int and Ext_sd
Bootloader unlock tool
Super SU update and pro version
HTC desir svTweaks
Recovery.img files and google drive
Installing an app as system app
Post #6
Modifications and embellishments:
Post #7
PRECAUTION (must read):
Post #8
Best Of Best:
Aroma File Manager(To use in recovery menu)
Aroma Font Manager(To use in recovery menu)
Post #9
Themes:
Post #15
FULL WIPE:
[includes: wipe data / factory reset + wipe cache partition + format / data + format cache + format system + wipe dalvik-cache (+ wipe battery stats)]
Post #52

Unlocking bootloader and Rooting
Unlocking BOOTLOADER
Things to Remember
o This guide is only for the HTC DESIRE SV. Do not attempt the following steps on any other device.
o The warranty will be voided after the unlock.
o Make sure your battery is charged to at least 80%.
o If you are unsure about any step, ask us in the comment section before proceeding further.
Thing to be Done
o All the files will be wiped after the unlock so take backup of all your important data.
o Enable USB debugging from the Developer options.
o Download and install the HTC Sync Manager from this link.
o Download Fastboot zip file from this link and extract the contents into a folder namedFastboot.
o Disable antivirus software on your system to avoid unnecessary interference.
Step-by-step Guide to Unlock HTC DESIRE SV Bootloader
o Go to the website www.htcdev.com and register yourself. Make sure to verify the email to complete the registration process.
o Login to the htcdev website and then go to the Unlock Bootloader page.
o Click the drop down devices list Under supported devices and select the option ‘All Other Supported Models‘. (select htc desire because htc desire sv will be not in the list)
o Click on ‘Begin Unlock Bootloader’ and select Yes on the confirmation screen.
o Acknowledge messages on the Legal Terms and click on ‘Proceed to Unlock Instructions’.
o The next page with unlocking bootloader instructions will give you 4 steps to follow: Disconnect mobile from the PC if connected and then switch off the device. Then pressVolume Down button and Power button to start the device in Bootloader mode. Once it’s in Bootloader screen, highlight Fastboot option and press the Power button. Then connect your HTC DESIRE SV to PC via USB cable.
o Click on Proceed to step 5. But it’s not required to follow the steps mentioned in the second page of htcdev site. Instead you go to the Fastboot folder which we have extracted earlier and hold the Shift key and at the same time right click on the free space. Select the option ‘Open command window here’.
o Windows command window will appear like ‘..\Fastboot>’. Now you need to enter the following command in the command line fastboot devices (This command will tell you whether your device is detected by your computer or not. If your device shows you can go ahead with the next step. If the device is not detected the command screen will not show any information and in this case you have to re-install the HTC Sync Manager and reboot your PC. Then redo the tutorial from the beginning.
o Keep open the command window. Then go to the third page of instruction in htcdev by clicking on ‘Proceed to Step 8‘ button.
o Follow the steps mentioned in the third page of htcdev site (from step 8 to step 10). When all the steps are done, click on Submit button.
o If all the steps are done properly you will get a message ‘Token Submitted Successfully!’ and the Unlock Key information is emailed to you.
o Open the email from HTC and download the attached file named ‘Unlock_code.bin’.
o Once the download is done copy the ‘Unlock_code.bin’ file to Fastboot folder.
o Now go back to the command window and the following command: fasboot flash unlocktoken Unlock_code.bin
o Now the HTC DESIRE SV will get a message to Unlock bootloader. Press Volume up and select YES, then press Power button to confirm the action.
o Your HTC DESIRE SV will now restart and ask to complete the factory reset process. You can now disconnect your device from the PC.
That’s all! You have successfully Unlocked the Bootloader of your HTC DESIRE SV. Now you can root and install Custom ROMs on your device without any issues.
ROOTING HTC DESIRE SV:
1.)Dowload android.rar from link
2.)download superuser.zip from link
3.)Rooting:
[steps:]
*switch off your mobile
*click volume down and power button simultaneously to enter boot menu
*click fastboot
*connect your device to pc via usb
*it will be appearing fastboot usb in the mobile
*extract downloaded file to c:\
*copy super user.zip to your external sd card
*click winkey+r and type cmd to enter command prompt
*type cd\
*type cd android to enter into c:\android where the files are present
*type fastboot flash recovery recovery.img
*you will get success notification in command prompt
*type fastboot reboot-bootloader
*click recovery
*wait for few minutes it wil show entering recovery... and it wil enter black screen after 2 minutes it wil enter recovery
*click install zip via sd card
*select zip file from external sd
*click yes to install
*congratulation your HTC DESIRE SV mobile is rooted now

Custom rom(htc desire sv)
INSTALLING CUSTOM ROM:
1. Fill the firmware to the memory card. (No need to unpack)
2. Turn off the phone. We take out the battery and insert back. Turn it pinching button VolDown + Power.
3.Select Fastboot, select Recovery, get into the menu CWM Recovery.
4.Use volume keys to select backup and restore and select backup. Wait for 5-10 minutes. CWM Recovery creates a backup of your system in the card catalog type clockworkmod / backup / date backup. Rename this directory is not recommended! To organize the directory must to 1GB of free space. If necessary, it can be transferred to and stored on a computer folder with preservation of architecture. Then, when you install custom firmware failed or that fails, you will always be able to restore the original state of the system: backup and restore → restore → select → confirm by Power button.
5. After a successful backup system, go to the firmware kernel.
From the archive IMG Galickijj sews kernel (boot.img) is mandatory. (manual firmware kernel header)
After flashing the kernel go to Fastboot, select Recovery, get into the menu CWM Recovery.
proceed to the cleaning system (Wipe, Wipe), the cache from the old firmware.
choose in CWM Recovery point to:
- wipe Data / factory reset
Advanced / wipe dalvik cache
Go back to the main menu CWM Recovery.
6. Go directly to the installation of the firmware. To do this, select the menu item CWM Recovery
- install ZIP from sdcard → Choose ZIP from sdcard
- choose a file
- confirm by Power button
After installing CWM Recovery will show you the message
Install from sdcard complete.
Doing a reboot.
Be patient, the first load system is long, wait about 5-10 minutes until the system is booted.
custom rom list:
Mod Edit: Links removed for warez:
6. Do not post warez.
If a piece of software requires you to pay to use it, then pay for it. We do not accept warez nor do we permit any member to request, promote or describe ways in which Warez, cracks, serial codes or other means of avoiding payment, can be obtained. This is a site of developers, i.e. the sort of people who create such software. When you cheat a software developer, you cheat us as a community

Common Questions and their answers
Q1.
WiFi not working after installing custom Rom :
#switch off you mobile
#get into fastboot by pressing power and volume down button
#go to command prompt and navigate to c:\android where sdk files downloaded from post #1 is present
#copy boot.img from custom rom installed to c:\android
#in cmd type fastboot flash boot boot.img
#after getting success , reboot your phone
$##$ Your wifi will be working now
Q2.
How to s-off HTC Desire sv?
Many people were trying to find how to s-off and if you try by another other method it's may lead your device bricking.
Q3.
When I delete a file in system/app or some root files it deleted and after reboot it's there?
Well, then the only conclusion that a temporary root access still can live, but without S-off you cant make sense to remove the application so as to restore...
Q4.
Is Jellbean rom available for HTC desire sv or how to upgrade to jelly bean?
Jelly bean rom is currently un available and many forum developers were developing rom as rom porting fails with htc desire sv it will take some time .....
Q5.
In ClockworkMod recovery_menu my screen is slighly left when I press down and it comes back to normal when I press the down button again .... Is the problem on my mobile?
If you mean when you click on the menu items that shift...It is normal feature of the ClockworkMod recovery. No worries

Getting back to mobile purchsed
This will help you in getting back your mobile which you have purchased.
The steps involved here are:
Installing stock rom without root permissions
(or)
To delete SuperUser app and
To re-swap memory(If you haven't installed any custom rom)
(and)
Re-locking bootloader
Installing stock rom without root permissions:
If u have stock rom of your mobile backed up anyway it won't be useful because it's rooted.
So download stock rom from here:
LINK1
LINK2
Refer Post #48 for stock ROM (2 Versions)
Rom info:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
copy to your ext_sd card and flash it via recovery
Re-Locking bootloader:
put your phone in bootloader mode:
Switch OFF your phone.
Press and hold “Volume down + Power button” together until your phone boots into bootloader mode.
Select Fastboot using the Power button.
Use the Volume buttons to go up & down and Power button to select the highlighted option in the bootloader mode.
Connect your phone to the PC with a USB Cable.
Open the fastboot folder c:\android
Then open a Command prompt window inside the fastboot folder.
To do this → “Shift + Right Click” on any empty white space inside the folder and select the ‘Open command window here’.
Type the following in the command prompt window:
fastboot devices
This is to ensure that your device is detected, if nothing appears on screen with this command, then it means you don’t have the proper drivers installed on your PC. And if that’s the case you should download and install/re-install the HTC Sync software given in Step 1.1
Now type the following command to re-lock your HTC One X bootloader
fastboot oem lock
That’s all. Your phone’s bootloader is now re-locked and it’ll reboot automatically
To confirm, boot into bootloader mode and you’ll see “RELOCKED” written with a pink highlight at the top of the screen
To re-swap memory(int_sd and ext_sd)
download this file: Link
copy to ext_sd card
Flash via recovery
To delete SuperUser app(system):
Downlaod this file: Link
copy to ext_sd card
Flash via recovery

Updates
Swapping Internal_SD and Ext_sd in HTC DESIRE SV
Download this file and place it on your external card(keep a back up of your sd and ext_sd as the contents wil be deleted fully):
Link
Steps:
1.)go into recovery mode
2.)click select zip from sd card and browse the file
3.)click yes to install
4.)It will take few seconds
5.)go back and click reboot now.
6.)install all apps that you have backed up
7.)now you have successfully swapped ext_sd and int_sd
Note:
Don't rename the file you have downloaded or don't edit the contents..
HTC Boot loader unlock tool:
Link to download
follow onscreen instructions to unlock boot loader
Super Su Update Pro:
Link :
6. Do not post warez.
If a piece of software requires you to pay to use it, then pay for it. We do not accept warez nor do we permit any member to request, promote or describe ways in which Warez, cracks, serial codes or other means of avoiding payment, can be obtained. This is a site of developers, i.e. the sort of people who create such software. When you cheat a software developer, you cheat us as a community
HTC DESIRE SV google drive(my files):
Link
Recovery.img files:
Here comes recovery.img files working on HTC desire sv.The stock version is named as stock_recovery and other two clockword mod recvoery versions working on desire sv are 6.0.2.8(touch version and keys version) and 6.0.3.2(touch version)
Links for downloading:
download.........
HTC Desire sv tweaks:
This helps in improving our performance, hardware acceleration, the search interval Wi-Fi networks, saving battery power, a smoother interface, improved the quality of photo, audio and video recording camera, etc.
"VSV_Tweaks" tweaks build.prop (Tweaking )
Installation :Before installing make backup! 1. copy the file to memory card 2. reboot into Recovery 3. In the Recovery menu, select the item advanced -> wipe dalvik cache 4. Select an option in Recovery - install zip from sd card 5. Specify the path to the file VSV_Tweaks 6. Reboot your phone, when installation is complete.
Who does not like to install the patch build.prop (stock) or restore the backup.
Links:
VSV_tweaks.zip
build.prop.zip
Installing an app as system app:
1. Download the archive.
2. Open it (I used winrar.)
3. Add the desired installation file (*. Apk) in the folder system / app in the archive and save it.
4. * do not touch anything..
5. Copy the zip to our microSD card .
5. Run the phone to recovery
6. Select install zip from sdcard, then choose zip from sdcard, choose zip and clock yes to install.
7. select go back(after successful installation)
8. select Reboot System now to reboot your phone

Modifications and embellishments for HTC Desire SV T326e
This post contains:
Wallpapers
Icons
Themes
Fashion dialer
Fashion keyboard
Wallpapers:
Sense 5 wall papers
Themes:
Classic theme:
Link
Sense 5 Theme
Link
Themes continued in Post #15
will be updated soon

Precaution
PRECAUTION for Brick(HTC DESIRE SV)
This is really a necessary post which will help you how to prevent yourself from your mobile getting bricked
Mostly many people have told that volume down and power button pressing to enter recovery made my mobile brick and this is a main cause for getting bricked, because many people will press volume up/down and power sometimes it may make your hardware fail.
so to prevent this we have used techniques to get your mobile to fastboot without using buttons,just connect mobile via PC via USB on any mode(charge only,media storage)
Download this file
Link to download
and
Run fastboot.bat to enter fastboot
Run stock_recovery.bat to install stock recovery.img
Run cwm_recovery.bat to install cwm_recovery.img ( U can also replace cwm_recovery.img by any version supported for the device)
These files should be usually placed in c:\android as all the procedures are following steps with that.
BACK UP ROM:
Even backing up rom is necessary thing. a copy of backed_up rom should be in PC
If something went bad with installing custom rom , you can easily roll back to previous rom which you have backed up

Best of Best
Now this Post if for Aroma File manager and Aroma Font manager:
What is Aroma file manager:
Android Recovery was powerful system. But it was pain when it come to managing your file system
But now AROMA File manager is available for everyone to do this common tasks.
So you can access files through a file manager in recovery menu called Aroma File manager
What is Aroma Font manager:
It's hard to Change fonts on a S-ON device as the files replaces in system will not be permanent.
This made easier by Aroma Font Installer
Fonts Available:
- Android Logo
- Gingerbread Stock
- MeeGo
- Nokia Pure View Font
- Roboto(Stock)
- Ubuntu
- Windows Phone 7
- Sony Xperia S
How to Use:
1. Download and copy the file in your SDcard.
2. Boot on Recovery.
2. Choose install zip from SDCARD.
Download:
Aroma_Font_Manager
Aroma_File_Manager
:good::good::good::good::good:

last post reserving so

Download Speed
prasath kp said:
INSTALLING CUSTOM ROM:
1. Fill the firmware to the memory card. (No need to unpack)
2. Turn off the phone. We take out the battery and insert back. Turn it pinching button VolDown + Power.
3.Select Fastboot, select Recovery, get into the menu CWM Recovery.
4.Use volume keys to select backup and restore and select backup. Wait for 5-10 minutes. CWM Recovery creates a backup of your system in the card catalog type clockworkmod / backup / date backup. Rename this directory is not recommended! To organize the directory must to 1GB of free space. If necessary, it can be transferred to and stored on a computer folder with preservation of architecture. Then, when you install custom firmware failed or that fails, you will always be able to restore the original state of the system: backup and restore → restore → select → confirm by Power button.
5. After a successful backup system, go to the firmware kernel.
From the archive IMG Galickijj sews kernel (boot.img) is mandatory. (manual firmware kernel header)
After flashing the kernel go to Fastboot, select Recovery, get into the menu CWM Recovery.
proceed to the cleaning system (Wipe, Wipe), the cache from the old firmware.
choose in CWM Recovery point to:
- wipe Data / factory reset
Advanced / wipe dalvik cache
Go back to the main menu CWM Recovery.
6. Go directly to the installation of the firmware. To do this, select the menu item CWM Recovery
- install ZIP from sdcard → Choose ZIP from sdcard
- choose a file
- confirm by Power button
After installing CWM Recovery will show you the message
Install from sdcard complete.
Doing a reboot.
Be patient, the first load system is long, wait about 5-10 minutes until the system is booted.
custom rom list:
1.) custom firmware IMG Galickijj for HTC Desire SV based on 1.07.401.6 ICS 4.0.4 :
Link to download:
custom firmware IMG Galickijj for HTC Desire SV based on 1.07.401.6 ICS 4.0.4 HTC Sense 4.1
Features:
Root core
applications Root
Deodexed & Zipaligned
Memory optimization it right now
(with the ability to move applications to the SD
when connected to a PC otkryvaetsya only SD)
Support Init.d scripts
Ramdisk
EXT4
Zipalign mount system partitions
improved picture quality and 100%
GPU accelerated
reduction "lags" when dialing to improve responsiveness of the screen
improved battery saving
Android debugging icon is removed to improve the video quality of some errors in applications
improve the speed of the Internet
to improve reading speed SD
GPS is optimized
SystemUI Mod
Sound lock / unlock
Advanced Topics
Fixed calculator
changed Boot animation
You can put embellishment
Ad Blocking applications
, etc.
Applications(extra):
QuickPanel
Quick Settings Panel
EsFileExplorer
EsTaskManager
SuperSU
Adobe Flash Player
BusyBox Pro
2.)Firmware FULL DEODEX for HTC Desire SV cid HTC_A48
Link To download:
Firmware FULL DEODEX for HTC Desire SV cid HTC_A48
Features:
* brushed rom
* full deodex
* installed necessary tools
* root - system patch
* LiDRoiD Quick Access Toolbar - system patch
* battery in 1% increments - system patch
* pre installed stock + new themes
* memory are reversed, and the built-in SD - System Patch
* patch calculator
Applications(extra):
SuperUser
TotalCommander
TimeSyncPro
RootExplorer
Calculator - (human)
SambaFilesharing
QuickSetting panel LiDRoiD
***** patch system means that it in no way can affect your resources, i.e guzzle battery, etc. etc.
Click to expand...
Click to collapse
The download speed is limited on that site. Please upload it to google drive or yandex disk.

karaman_deniz said:
The download speed is limited on that site. Please upload it to google drive or yandex disk.
Click to expand...
Click to collapse
google drive link updated for 2nd rom but for 1st rom it's uploded by another persona nd i don't have google drive link. i'm sorry

can the themes b installed on any htc non rooted phone?
---------- Post added at 09:32 AM ---------- Previous post was at 09:23 AM ----------
can you upload more themes ..i am looking for these themes forever!! Thank you so very much

getting back to mobile purchased
can u pls tell me the procedure for restoring...I extracted the stock rom into external sd..after that in recovery mode I choose restore and install...but it is nt working..pls help...

Here are some themes for sense 4.1(no root needed)
Yellow theme:
Link to download...
Matte theme:
Link to download...
Retro theme
Link to download
Tron theme
Link to download
Beats by dre theme
Link to download
Holiday theme
Link to download
All credits go to the developer of the themes..I am just posting theme..

kulveer007 said:
can u pls tell me the procedure for restoring...I extracted the stock rom into external sd..after that in recovery mode I choose restore and install...but it is nt working..pls help...
Click to expand...
Click to collapse
step1:
Download and Copy the file to external sd card...
step2:
There are two types of files available
if the file is .zip select install zip from sd vard and browse the .zip file and click yes to install
if the file is in folder (system. tar,boot.img,data.tar,etc...) you have to copy the folder(name wil be date and time) to clockworkmod\backup\ and go to recovery and choose restore/back up and click restore and choose the folder
Hit thanks if i helped you

zerohunk said:
can the themes b installed on any htc non rooted phone?
---------- Post added at 09:32 AM ---------- Previous post was at 09:23 AM ----------
can you upload more themes ..i am looking for these themes forever!! Thank you so very much
Click to expand...
Click to collapse
yeah uploaded more and even more themes will be uploaded soon

Cant restore
bro i download CWM Recovery_Stock(root)_HTC_Desire_SV.rar...and copy folder (with date and time) in cloakwrk/backup...in recovery i choose backup and restore then restore...then i selected the folder...after a minute it is showin cant open /cache/recovery/last_log...

thank you very much for all your documents which is translated from russian forum and your devolopment. you are the only one devoloper who works on desire sv. this thread is awesome for users. i tried your way to root my device and i succeed, thank you again. i will customize my device with your tweaks,custom roms exc.
edit: so which is your recommended rom ? deodex or the other?
edit2: sorry for my bad english

help
kulveer007 said:
bro i download CWM Recovery_Stock(root)_HTC_Desire_SV.rar...and copy folder (with date and time) in cloakwrk/backup...in recovery i choose backup and restore then restore...then i selected the folder...after a minute it is showin cant open /cache/recovery/last_log...
Click to expand...
Click to collapse
Dude you have to extract that file to clockworkmod/backup\folder(where the folder name will be date and time of back up)
then in recovery menu select backup and restore--->restore-->select the folder-->click yes to install
happy day

CUSTOM ROM WITH ALL FUNCTIONALITY OF STOCK ROOM FOR MicroMax Canvas 4 - A210

Dear Friends,
After my hectic work load I was trying to concentrate on solving the Camera problems when I submitted Aroma based Rom following "bgcngm" of his " [ROM][03-08-2013] ZTE V987 (MT6589) custom ROMs (JB)".
It met with difficulties of Camera problem when was trying to fix it. In the mean time I experimented with several other Rom that has the same board features of MicroMax Canvas 4 -A210. Though many of them are booting but they had one or other problems. Then I copied the required ediiting by copying and pasting in the stock rom to make the phone booting with all its stock performance. All these days, most of them might have used to do with the stock version, I retained the stock version and build the ROM in the other way round.
The Rom is up loaded to Google Drive and the url is given.
TUTORIAL:
PLEASE BACK UP / PERFORM NANDROID BACKUP YOUR ROM BEFORE FLASING THIS ROM FOR SAFTY
Some time you loose your IMEI, kindly back it up using the Mobileuncle mtk tool.
1. If you are not used for Smart Phone Flash Tool(SPFT), then you can directly flash using the flash tool facility provided in the phone. Put off your Phone. Wait for about half or one minute or till the phone vibrates. Hold simultaneously the Volume up/down button and Power button and touch the home touch key. Then the phone displays two option.
Recovery Mode - Volume up
Factory mode - Volume down
Press the volume up and 3 option will pop up and in the middle you can find the Fastboot Mode. Pressing volume down you can get into the Fastboot Mode. Now open the folder "direct cwm flash 5.5.0.4" and double click on the file "fastboot flash.bat". Now you have installed the CWM Recovery 5.5.0.4 into your phone.
2. If you are on stock version of the ROM or in custom ROM, just copy the XXXmicMAX.zip file into your external sdcard.
3. As the rom is only partially rooted it is necessary to Root the phone externally. I will upload a rooted version in couple of days. To Root the phone I have provided the UPDATE-SuperSU-v1.65.zip. Copy this file to your external Sd card.
4.By pressing volume up/down, power and touching the home key get into the CWM recovery mode.
I. Choose install zip from sd card and then choose zip from sd card. Select the zip file XXXmicMAX.zip file you have just coped and install it. Wait for about a minute or two.
2. After the Update is completed again you go to the file UPDATE-SuperSU-v1.65.zip and install.
3. After installation of these two file you reboot your phone.
The phone will boot with screen showing Android is updating.
Enjoy.
url: 1. https://drive.google.com/folderview?id=0Bz8Fgu4wkBnqMTNndkRjRFBGSzg&usp=sharing .... "direct cwm flash 5.5.0.4" file
2. https://docs.google.com/file/d/0Bz8Fgu4wkBnqN1lNZUpKWm1SWFk/edit?usp=sharing ..... XXXmicMAX.zip file
3. https://docs.google.com/file/d/0Bz8Fgu4wkBnqYlo3b0lpZ1ZNRUE/edit?usp=sharing ..... UPDATE-SuperSU-v1.65.zip file.

What the hell is this????
puduraja said:
Dear Friends,
After my hectic work load I was trying to concentrate on solving the Camera problems when I submitted Aroma based Rom following "bgcngm" of his " [ROM][03-08-2013] ZTE V987 (MT6589) custom ROMs (JB)".
It met with difficulties of Camera problem when was trying to fix it. In the mean time I experimented with several other Rom that has the same board features of MicroMax Canvas 4 -A210. Though many of them are booting but they had one or other problems. Then I copied the required ediiting by copying and pasting in the stock rom to make the phone booting with all its stock performance. All these days, most of them might have used to do with the stock version, I retained the stock version and build the ROM in the other way round.
The Rom is up loaded to Google Drive and the url is given.
TUTORIAL:
PLEASE BACK UP / PERFORM NANDROID BACKUP YOUR ROM BEFORE FLASING THIS ROM FOR SAFTY
Features?? Screenshotss??? Bugs??? Credits??? Please provide the details..
Some time you loose your IMEI, kindly back it up using the Mobileuncle mtk tool.
1. If you are not used for Smart Phone Flash Tool(SPFT), then you can directly flash using the flash tool facility provided in the phone. Put off your Phone. Wait for about half or one minute or till the phone vibrates. Hold simultaneously the Volume up/down button and Power button and touch the home touch key. Then the phone displays two option.
Recovery Mode - Volume up
Factory mode - Volume down
Press the volume up and 3 option will pop up and in the middle you can find the Fastboot Mode. Pressing volume down you can get into the Fastboot Mode. Now open the folder "direct cwm flash 5.5.0.4" and double click on the file "fastboot flash.bat". Now you have installed the CWM Recovery 5.5.0.4 into your phone.
2. If you are on stock version of the ROM or in custom ROM, just copy the XXXmicMAX.zip file into your external sdcard.
3. As the rom is only partially rooted it is necessary to Root the phone externally. I will upload a rooted version in couple of days. To Root the phone I have provided the UPDATE-SuperSU-v1.65.zip. Copy this file to your external Sd card.
4.By pressing volume up/down, power and touching the home key get into the CWM recovery mode.
I. Choose install zip from sd card and then choose zip from sd card. Select the zip file XXXmicMAX.zip file you have just coped and install it. Wait for about a minute or two.
2. After the Update is completed again you go to the file UPDATE-SuperSU-v1.65.zip and install.
3. After installation of these two file you reboot your phone.
The phone will boot with screen showing Android is updating.
Enjoy.
url: 1. https://drive.google.com/folderview?id=0Bz8Fgu4wkBnqMTNndkRjRFBGSzg&usp=sharing .... "direct cwm flash 5.5.0.4" file
2. https://docs.google.com/file/d/0Bz8Fgu4wkBnqN1lNZUpKWm1SWFk/edit?usp=sharing ..... XXXmicMAX.zip file
3. https://docs.google.com/file/d/0Bz8Fgu4wkBnqYlo3b0lpZ1ZNRUE/edit?usp=sharing ..... UPDATE-SuperSU-v1.65.zip file.
Click to expand...
Click to collapse
Please provide the details...

WHAT KIND OF DETAILS You need
NeroD said:
Please provide the details...
Click to expand...
Click to collapse
Dear brother,
You install it and see the functioning. Even I have installed the Xposed Installer in my personal phone. Install and enjoy.
I already informed. I copied many required files into the stock files to make it working with the trial and error procedure. Just put some files into the bin, some files into the lib, some files into the vender some file into Xbin and experimented. It is simple copy and past that suits to the system of the phone to get the boot and stock performance. We can not say the the stock performance is all that bad. You can install camera FV-5 also which i have in my personal phone.
Just give me some ideas to improve. I have not beatified my presentation which is not important.
Please suggest some improvements to increase the performance. The battary drain has stopped to about 30% in my phone. But it depends on individual usage. I am only a learner in this game and as a hobby I pass my time peacefully.
Thanks.
.

Screeb Shots, direct root and recovery tools
puduraja said:
Dear brother,
You install it and see the functioning. Even I have installed the Xposed Installer in my personal phone. Install and enjoy.
I already informed. I copied many required files into the stock files to make it working with the trial and error procedure. Just put some files into the bin, some files into the lib, some files into the vender some file into Xbin and experimented. It is simple copy and past that suits to the system of the phone to get the boot and stock performance. We can not say the the stock performance is all that bad. You can install camera FV-5 also which i have in my personal phone.
Just give me some ideas to improve. I have not beatified my presentation which is not important.
Please suggest some improvements to increase the performance. The battary drain has stopped to about 30% in my phone. But it depends on individual usage. I am only a learner in this game and as a hobby I pass my time peacefully.
Thanks.
.
Click to expand...
Click to collapse
NeroD said:
Please provide the details...
Click to expand...
Click to collapse
Some of the screens shots are presented below:
If you feel difficulties in rooting the phone the you can use the file provided below:
Procidure:
1. Go to system settings
2. On the display, open -"About Phone"
3. On the display touch 7 times the "Build number" till you get a pop up of you are a developer
4. Then go return back to settings.
5. Open the developer option Tick "Stay awake, USB debugging" and untick Verify apps"
6. Now open up the 7z.zip folder " Micromax Rooter", and take the rooter folder you find inside to your desk top, open and double click the run.bat. Your phone auto boot wit the display of Android is updating.
If you want to enter the CWM recovery without using the buttons from your phone the open the zip file below: And double click the adb Recovery.bat.
With best wishes.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
View attachment 2267639
View attachment 2267640

Has any one ported this. If any problems encountered.
Please report.
I will be posting a fully rooted more customised version.
If you submit your feed back it help me to give you a more User friendly ROM immediately.
Sent from my A210 using xda app-developers app

Hi Bro,
Please come and join www.amaarforum.com, a forum that I have started recently for the mobile freaks. Invite others also.
Thanks

:good:
sganguly said:
Hi Bro,
Please come and join www.amaarforum.com, a forum that I have started recently for the mobile freaks. Invite others also.
Thanks
Click to expand...
Click to collapse
Thanks I have joined the farum today.

[MEGA]Titanium S1,Cherry Flame2.0,KTouch U86 Kiss,Archos 45 Platinum

Hello Everybody!!
Recently when going through the xda forums for the devices Karbonn Titanium S1, Cherry Mobile Flame 2.0, K-Touch Hornet u86 kiss , I noticed that a lot of people have questions regarding Stock rom, Recovery rooting and Solutions for Brick.However most of the posts have been left unanswered or died for some reason.
Hence I decided to open a thread that can be used to solve general problems and issues regarding the Device.
NOTE:- Archos 45 Platinum too has similar device specifications.The same CWM version worked for @best98 who is using an Archos 45 Platinum.
Tip:Using CWM touch recovery
When using the CWM Touch recovery you may notice that it is not really working properly and that touch is not doing anything. The fact is the touch is being registered and that the touch method is different than normal android because of limited drivers in recovery.
The working
Use one finger touch to scroll
Use two finger touch to select item
Installing a Recovery Menu
Using PC
1) Install the Mobile Drivers.
2) Download Minimal ADB And fastboot [Windows users] Linux and Mac users might have to download the whole Android sdk as of now.
3) Download the recovery you want from the attachments below.
4) Rename them to recovery.img after extracting and copy it to a folder of know location.
5) Boot your device into fastboot mode.i.e Power on your mobile by pressing and holding Power button and vol+ Key.until you see A green screen.
6) Connect your device to the PC and open Minimal ADB and fastboot
7) Run the command " fastboot flash recovery C:\USERS\MYNAME\DESKTOP\ANDROID\RECOVERY.IMG".
Without the quotes replace C:\USERS\MYNAME\DESKTOP\ANDROID\ with the location where you extracted recovery.img.
8) Wait untill it completes and VOILA new recovery installed.
Note: In case you want to preserve your stock recovery, run the command "fastboot boot C:\USERS\MYNAME\DESKTOP\ANDROID\RECOVERY.IMG"
Without the quotes replace C:\USERS\MYNAME\DESKTOP\ANDROID\ with the location where you extracted recovery.img.
Using Mobile
Simple Method.
Just install the TACK Manager from here and install the recovery .Enjoy .
Not so simple method
Download the flashable recoveries from Below and flash it through CWM Or TWRP [Yes, you need custom recovery for this to flash]
Click to expand...
Click to collapse
Rooting Your Device
Method 1: Through CWM/TWRP
1) Download the SuperSU package provided below.
2) Copy it to the root of your SDCard
3) Select Install zip from SDCard
Method 2:Through Framaroot
Personally I Did not get any success by this method.But lot of users reported it to to work by using the Gandalf exploit.
Also some versions of framaroot work better on some devices as compared to others.So maybe just have to check which version works for our Mobile.
1) Download and install Framaroot.apk
2) On the exploits list select Gandalf
3) It'll probably crash the first time and apparently work the second time you launch it.
As I Am not sure which version of framaroot works for this mobile hence no upload
Click to expand...
Click to collapse

Reserved
Flashing Roms and Fix Soft brick
1) Copy Rom to SDCard
2) Boot into Recovery by Powering on while holding power and vol+ Button.Initially you'll see a green screen...Keep holding untill the screen turns red.
3) Goto Mounts and storage and format /Cache and /Data. Format /SYSTEM if installing new rom.
4) Goto Advanced and format Dalvik Cache
5) Select Apply Zip from SD Card
6) Select zip file of rom to install and wait.
7) Reboot and voila.
Note:This is assuming you are using CWMR
Note: Do not format /SYS_BOOT Partition.You'll end up bricking your device and then will not be able to boot into Fastboot mode.
If this happens by mistake.Follow the next Guide.
Click to expand...
Click to collapse
Fixing RESET FOR ENTRY QPST DOWNLOAD
In case you end up Formatting /SYS_BOOT Partition then you'll most likely end up in this.There might be few other cases when this can happen but none that i am aware of.
If you Have a Linux Desktop
If you have access to Linux PC then connect your mobile to it and mount the partition which is around 50 MB. Download the Images.zip from below.unzip the file and copy the whole folder to the 50 MB partition.
Your File structure should look something like this
-\50MBPartition
-\image
-\AMSS.MBN
-\AMSSHD.MBN​
If you have Windows
http://www.filefactory.com/file/2n5ygdzybijv
I'll soon put up a guide for windows users.
This is the guide I found on facebook's CM Flame 2.0 group.
DISCLAIMER:
This fix worked for me. I WILL NOT BE HELD RESPONSIBLE FOR ANY DAMAGE TO YOUR PHONE, YOU DO THIS AT YOUR OWN RISK!!! Please do the process step-by-step. DON'T SKIP any step as I don't know what will happen and there's a possibilty that your phone will be dead permanently.
TOOLS NEEDED:
Roadkill and StockROM
DOWNLOAD STEPS:
1. Go to www.dropbox.com
2. SIGN-IN using MY credentials
E-mail: [email protected]
Password: dropbox-pemaustria
3. Navigate to the folder cmflame2, there you can find the file.
4. Right click cmflame2stock.zipx, and click download.
(THIS STEPS LEAVE ME NO CHOICE BUT TO GIVE MY DROPBOX ACCOUNT TO YOU. AS A RESPECT, PLEASE DO NOT CHANGE ANY ACCOUNTS AND SECURITY SETTINGS ON MY PROFILE. THANK YOU)
NOTE: Please use WinZip for extracting files. Thanks
TUTORIALS:
1. Disconnect all USB drives especially flash drives, including memory cards.
2. Turn on your device to QPST Mode, and connect it to computer. When a window prompt you to format card. CANCEL.
3. Extract the contents of cmflame2stock.zipx and run Roadkill.exe. Click 'Yes' if administrative privilages prompt you.
4. In the left side of 'Write image to' choose PHYSICAL DISK 1(3.61GB). In my case it is 3.61 GB. Your size must be approximately 4GB. CHOOSE THE RIGHT DISK. CHOOSING THE WRONG DISK WILL RESULT DAMAGE to the selected disk.
5. In your extracted folder, you will see an image file named CM-Flame2.0-StockROM.img.
6. On source file, browse for the image file you just extracted.
7. Click 'START', wait for the process until it's finished.
Click to expand...
Click to collapse

Custom ROM's
Stock Rom
Karbonn Titanium S1
Flashable ZIP
CWM Backup
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Cherry Mobile Flame 2.0
Flashable ZIP
K-Touch Hornet U86 Kiss
K-Touch 1.3.4 Rom
Archos 45 Platinum
Archos 45 CWM Backup
Click to expand...
Click to collapse
Custom ROMS
LeWa OS 14.05.16
Download
One of the most stable ROMs I've seen for our device.It is Continiuosly developed and supported at Lewatek and has weekly updates at friday.OTA update are available so you don't have to download the whole ROM
MIUI ROM 4.1.17
Highly Customizable ROM.
MIUI Is known for the amount of customization you can do with it.From Statusbar to Lockscreen to everything normal android OS can do.
MIUI ROM Download
Lenovo Magic 4.0
With Support for over 11 Languages and
Download
CM10.1
CM10.1 Base ROM
Update File
CM10.2 Alpha
CM10.2 ROM
CM11 Alpha 3
CM11 ROM
Nokia X ROM Port
This ROM is ported by our friend rdis.
You can find the ROM here
AOSP KitkatFlare
More like Stock ROM with KitKat touch in it.Cooler and more Powerful
This is a KitKat Look alike and not the actual kitkat. For KitKat Check CM11 Above.
AOSP KitKatFlare
IXYNOS
Based on stock
Fully themed with color combination of cyan, yellow, purple and white
Slim rom around 189 Mb
init.d tweaks
build.prop tweaks
ttpod
mifileexplorer
pre rooted
zipaligned
net speed in status bar
good battery life
extremely smooth high performance rom
camera with smile detection
Ixynos ROM
Xperia Z
Xperia Z Download
Click to expand...
Click to collapse

Reserved
Reserved

Thanks idrogon81
idragon81 said:
Hello Everybody!!
Recently when going through the xda forums for the devices Karbonn Titanium S1, Cherry Mobile Flame 2.0, K-Touch Hornet u86 kiss [Hence reffered to as TCK-SU186, Simply because it is easier to refer to ], I noticed that a lot of people have questions regarding Stock rom, Recovery rooting and Solutions for Brick.However most of the posts have been left unanswered or died for some reason.
Hence I decided to open a thread that can be used to solve general problems and issues regarding the Device.
Stock Rom
​
Custom Recovery
​
Rooting Method
​
Click to expand...
Click to collapse
Framarook-1.7.0.apk works fine to root karbonn s1 titanium without any crash. use gandalf exploit and its done.

sunilneelam said:
Framarook-1.7.0.apk works fine to root karbonn s1 titanium without any crash. use gandalf exploit and its done.
Click to expand...
Click to collapse
That's strange :/
Didnt work for me

Any Cynogenmod roms
idragon81 said:
Hello Everybody!!
Recently when going through the xda forums for the devices Karbonn Titanium S1, Cherry Mobile Flame 2.0, K-Touch Hornet u86 kiss [Hence reffered to as TCK-SU186, Simply because it is easier to refer to ], I noticed that a lot of people have questions regarding Stock rom, Recovery rooting and Solutions for Brick.However most of the posts have been left unanswered or died for some reason.
Hence I decided to open a thread that can be used to solve general problems and issues regarding the Device.
Stock Rom
​
Custom Recovery
​
Rooting Method
​
Click to expand...
Click to collapse
I loved Cynogenmod and I also want it to be on my device
Any help will be appreciated

LOLya said:
I loved Cynogenmod and I also want it to be on my device
Any help will be appreciated
Click to expand...
Click to collapse
There is CM10.1 for Our device. However i didnt find it to be stable.Didn't find ways to connect to data and some people had issues with microphone not working.
I'll be uploading more unbrick solutuions first, followed by MIUI rom and then CM10.1

TY
idragon81 said:
There is CM10.1 for Our device. However i didnt find it to be stable.Didn't find ways to connect to data and some people had issues with microphone not working.
I'll be uploading more unbrick solutuions first, followed by MIUI rom and then CM10.1
Click to expand...
Click to collapse
If uget it bugfree plz upload it
Thanks

English TWRP
idragon81 said:
Hello Everybody!!
Recently when going through the xda forums for the devices Karbonn Titanium S1, Cherry Mobile Flame 2.0, K-Touch Hornet u86 kiss [Hence reffered to as TCK-SU186, Simply because it is easier to refer to ], I noticed that a lot of people have questions regarding Stock rom, Recovery rooting and Solutions for Brick.However most of the posts have been left unanswered or died for some reason.
Hence I decided to open a thread that can be used to solve general problems and issues regarding the Device.
Stock Rom
​
Custom Recovery
​
Rooting Method
​
Click to expand...
Click to collapse
The TWRP is in Japanese Language can u upload english twrp.img
I googled for it but did'nt get it

Hi,
Great to read that.. at least after crawling the web and finding that Karbon S5 is equivalent to Archos 50 Platinum.. I find from the specs that this Karbonn S1 is the same as the Archos 45 Platinum that I own.
Specs are : here for the Archos 45..
http://www.archos.com/gb/products/smartphones/platinum/archos_45platinum/specs.html?#a
Finally.. I can't wait to see Cyanogen on it.. maybe a chance to have a CM11 ?
Regards

at last i could successfully port android 4.2.2 to karbonn titanium s1...
the rom is being uploaded...its named as "CHEEKUMOD" as it is edited by me
whats working:
ALMOST EVERYTHING :fingers-crossed:
whats NOT working:
CAMERA FOCUS
REST ALL ITS JUST FINE AND AWESOME !!
see the screen shots mean while

Karbonn Titanium S1 custom rom
VOILA !!
At last the first custom rom for Karbonn Titanium S1 is here !!
the most waited Android 4.2.2 for Karbonn Titanium S1
Custom DPI for better looks...
========================================================================================================
Whats WORKING:
VERSION 1
ALMOST EVERYTHING
VERSION 2
ALMOST EVERYTHING
========================================================================================================
Whats NOT WORKING:
VERSION 1
CAMERA FOCUS
SOMETIMES MICROPHONE IN CALL WONT WORK !!
VERSION 2
CAMERA FOCUS
Will give the fix soon,or someone please help me out to fix it...
========================================================================================================
HOW TO INSTALL THE ROM:
Download the rom and gapps and place it in the root of the SD card (Root meaning directly in ur SD card and not in folders so u can find it easily in the recovery)
VERSION 1:
ROM DOWNLOAD: drive.google.com/file/d/0Bz2-ARVuWcM9ZjNvNkJTLWZidnM/edit?usp=sharing
Gapps DOWNLOAD: drive.google.com/file/d/0Bz2-ARVuWcM9LW5TV2xMS2cydnc/edit?usp=sharing
INSTALL CLOCKWORKMOD
How to install clockwork mod for newbies (IF U HAVE CWM ALREADY INSTALLED U CAN SKIP THIS)
Things required:-
Recovery.img (Find in attachments below)
AIO flasher (Find in attachments below)
And of-course ur phone and USB cable
1.Switch off your phone.
2.Boot into fastboot (to boot into fastboot hold volume up+power button for few seconds untill u see a whole green screen and release both the buttons)
3.plug in your phone to pc via USB cable.
4.Download the AIO flasher from attachment below,extract it and open it (Run as admin in pc if required).
5.Select recovery in the AIO flasher and click on select file and select the recovery.img which u downloaded from the attachments below.
6.Now check the erase option and click on flash and wait till it reads "finished" in the AIO flasher dialog box.
7.Remove the cable and pull the battery and re insert it to exit fastboot.
Congratulations !! You have successfully installed CWM on ur device.
BOOT INTO RECOVERY MODE
To boot into recovery mode u need to hold the volume up+power buttons untill the screen turns green and do not release the buttons now hold untill the screen turns red and release the buttons.Wait for sometime untill it boots into the recovery.
navigate using the volume keys and select using the power keys.
1.Select Wipe data/factory reset.
2.Navigate to Advanced and select it.
3.Wipe dalvik cache and go back to main.
4.Now select install zip from sd card.
5.Now select choose zip from sdcard.
6.Select the rom which u downloaded and copied to the root of the SD card.
7.And select yes.
8.Wait until it reads installation complete.
9.And using the same method from step.4 also install the gapps. to flash Gapps u need to select the gapps file instead of rom file.
NOW reboot and enjoy !! IF IT DOSENT REBOOT DONT PANIC PULL THE BATTERY AND POWER ON MANUALLY
Congratulations !!
Your device is running Android 4.2.2 now.
And if u liked this please +1 this
========================================================================================================
DOWNLOAD THE VERSION 2 OF MY ROM HERE WITH MIC FIX AND GAPPS !!
IMPORTANT !!!!!!!!!!!!!!!!!!!!!!! <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
DO NOT FLASH GAPPS WITH THIS VERSION OF MY ROM IT IS PRE INSTALLED IN THE ROM...!!
VERSION 2:
ROM DOWNLOAD: https://drive.google.com/file/d/0Bz2-ARVuWcM9SUVkUnJSSnV3WEU/edit?usp=sharing
GAPPS DOWNLOAD: ITS PRE INSTALLED IN THE ROM DO NOT FLASH AGAIN !! < < < < < < < < < < < < < < < < <---------------------NOTE
Changelog:
1:Fixed "Mic not working in call".
2:have added gapps in the rom file to minimize flashing procedure of flashing each at a time.
========================================================================================================
DISCLAIMER:
NOTHING WILL GO WRONG NORMALLY BECAUSE I HAVE TESTED THESE PERSONALLY BUT IF IT HAPPENS TO U I AM NOT RESPONSIBLE..!!
HAVE A BACKUP OF UR DEVICE so if something goes wrong u can revert the phone to the earlier working stage.
I AM NOT RESPONSIBLE FOR BRICKING OF YOUR PHONES DUE TO THIS PROCEDURE DO IT AT YOUR OWN RISK !!

pls..
idragon81 said:
Flashing Roms and Fix Soft brick
Fixing RESET FOR ENTRY QPST DOWNLOAD
Click to expand...
Click to collapse
Pls.. post a guide for windows users.thanks

CWM is the solution
claymisteryo said:
Pls.. post a guide for windows users.thanks
Click to expand...
Click to collapse
Its not necessary to flash or reset the soft brick using any OS,
U can do it by CWM also.
1]For softbrick u can just factory reset and wipe cache
2] for flashing u can mount and remount sdcard and copy the .zip file to it and choose install zip from sdcard

Plz accept my request
ROM DOWNLOAD: drive.google.com/file/d/0Bz2-ARVuWcM9ZjNvNkJTLWZidnM/edit?usp=sharing
Click to expand...
Click to collapse
Hey Cheetan I just requested u for rom from the link plz accept it I want to try it

LOLya said:
Hey Cheetan I just requested u for rom from the link plz accept it I want to try it
Click to expand...
Click to collapse
me too not able to download

Mincrophone not working!!
when you call, the other person cannot hear your voice.... plz fix this!
its quite a major BUG!

Original Site
chetan007cheeku said:
VOILA !!
At last the first custom rom for Karbonn Titanium S1 is here !!
the most waited Android 4.2.2 for Karbonn Titanium S1
Custom DPI for better looks...
Whats WORKING:
ALMOST EVERYTHING
Whats NOT WORKING:
CAMERA FOCUS
SOMETIMES MICROPHONE IN CALL WONT WORK !!
Will give the fix soon,or someone please help me out to fix it...
HOW TO INSTALL THE ROM:
Download the rom and gapps and place it in the root of the SD card (Root meaning directly in ur SD card and not in folders so u can find it easily in the recovery)
ROM DOWNLOAD: drive.google.com/file/d/0Bz2-ARVuWcM9ZjNvNkJTLWZidnM/edit?usp=sharing
Gapps DOWNLOAD: drive.google.com/file/d/0Bz2-ARVuWcM9LW5TV2xMS2cydnc/edit?usp=sharing
INSTALL CLOCKWORKMOD
How to install clockwork mod for newbies (IF U HAVE CWM ALREADY INSTALLED U CAN SKIP THIS)
Things required:-
Recovery.img (Find in attachments below)
AIO flasher (Find in attachments below)
And of-course ur phone and USB cable
1.Switch off your phone.
2.Boot into fastboot (to boot into fastboot hold volume up+power button for few seconds untill u see a whole green screen and release both the buttons)
3.plug in your phone to pc via USB cable.
4.Download the AIO flasher from attachment below,extract it and open it (Run as admin in pc if required).
5.Select recovery in the AIO flasher and click on select file and select the recovery.img which u downloaded from the attachments below.
6.Now check the erase option and click on flash and wait till it reads "finished" in the AIO flasher dialog box.
7.Remove the cable and pull the battery and re insert it to exit fastboot.
Congratulations !! You have successfully installed CWM on ur device.
BOOT INTO RECOVERY MODE
To boot into recovery mode u need to hold the volume up+power buttons untill the screen turns green and do not release the buttons now hold untill the screen turns red and release the buttons.Wait for sometime untill it boots into the recovery.
navigate using the volume keys and select using the power keys.
1.Select Wipe data/factory reset.
2.Navigate to Advanced and select it.
3.Wipe dalvik cache and go back to main.
4.Now select install zip from sd card.
5.Now select choose zip from sdcard.
6.Select the rom which u downloaded and copied to the root of the SD card.
7.And select yes.
8.Wait until it reads installation complete.
9.And using the same method from step.4 also install the gapps. to flash Gapps u need to select the gapps file instead of rom file.
NOW reboot and enjoy !! IF IT DOSENT REBOOT DONT PANIC PULL THE BATTERY AND POWER ON MANUALLY
Congratulations !!
Your device is running Android 4.2.2 now.
And if u liked this please +1 this
DISCLAIMER:
NOTHING WILL GO WRONG NORMALLY BECAUSE I HAVE TESTED THESE PERSONALLY BUT IF IT HAPPENS TO U I AM NOT RESPONSIBLE..!!
HAVE A BACKUP OF UR DEVICE so if something goes wrong u can revert the phone to the earlier working stage.
I AM NOT RESPONSIBLE FOR BRICKING OF YOUR PHONES DUE TO THIS PROCEDURE DO IT AT YOUR OWN RISK !!
Click to expand...
Click to collapse
Actually Cheetan this is the site with the same ROM,no offence.You might have modified much in this ROM(Your ROM(Cheeku ROM))
Site: http://www.needrom.com/mobile/k-touch-u86-7
Problem is u just need to make account

LOLya said:
The TWRP is in Japanese Language can u upload english twrp.img
I googled for it but did'nt get it
Click to expand...
Click to collapse
can i use any twrp version instead?

[Guide][Marshmallow] Android 6.0 official update for Micromax Canvas A1 (AQ4501)

Update: SPFlashTool flashable Marshmallow firmware file is now available. Build MOB30N.
OTA links are already there on xda, but here was no specific thread for Canvas A1 so i am writing one
Google has released the OTA files for Canvas A1 and other android one devices.
NOTE: To update your phone using OTA files your phone should be running Stock lollipop or atleast stock recovery. (Not applicable if using sp flash tool)
If you are running a custom rom or custom recovery then before proceeding to this guide you must revert back to stock lollipop using sp flash tool
Pre-requisites: 1.Your phone should be atleast 60% charged
2. Back up all important data (just to be safe)
Canvas A1 users can easily update their device by following method(s)
Method 1 (the usual method):
Step 1: Download the official Marshmallow OTA file from here https://android.googleapis.com/packages/ota/google_aq4501sprout_aq4501/dc78fbefaf5f69cc4754751251d9ece094bc96e6.signed-sprout-mmx-MRA58M-from-LMY48M.zip
Step 2: Connect your smartphone to computer using the original USB cable.
Step 3: Copy and paste the OTA zip files to phone's storage and make a note of its location.
Step 4: Boot your smartphone into recovery mode or stock recovery: Disconnect the phone from computer, and then turn it off.
Press and hold both the Volume and the Power buttons until the display turns on and enters bootloader mode.
Hit the volume button to open the Recovery menu and then press the power button to select it. Your phone should now boot into recovery mode.
At this moment, a dead Android with an exclamation mark should appear on the screen. Now press and hold Power button for three seconds and then hit the Volume up button once to progress into recovery mode.
Step 5: Return to the main recovery screen and choose 'install update from sdcard'.
Step 6: Then select the OTA zip file using the volume buttons for navigation and the Power button to select any file or open a folder. After you select the zip file, confirm its installation and the update should start installing on your device.
Step 7: Once the installation is done, return to main screen of recovery. Choose Reboot system now to restart the phone and boot into the newly installed Android 6.0 Marshmallow OTA update from Google.
Voila!! You are running official Android 6.0 :laugh:
Method 2 (using sp flash tool, best method)
This method can be used even if you are running a custom rom. You can also use this method to unbrick Micromax Canvas A1.
Pre-requisites: Windows computer, USB cable, and most important "patience".
Step 1:
a) Download micromax driver.{thanks to @mohsin.r.munshi}
Extract its content, you will find an .exe file inside a folder "driver9401". Disable your antivirus and run the .exe file as administrator. (If you are using 64-bit windows, you will need to "disable driver signature enforcement". Google it)
b) Download SP Flash tool from my mediafire or from its official website. Extract it to any folder
c) Download SPflashTool flashable Marshmallow firmware . Extract the zip file. You will see the following files in it (similar not exact)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note the location of MT6582_Android_scatter.txt file
Step2: Goto the folder where you have extracted sp flash tool. Run flash_tool.exe
Step 3: In sp flash tool, Click on "scatter loading". Then locate and select "MT6582_Android_scatter.txt". SP Flash tool will load all firmware files from the folder where you have extracted the OTA files.
Step 4: Power off your phone. And REMOVE the battery. Now on SP flash tool, click on "Download".
(refer to screenshots given on this website. Ignore the steps given on this website, just refer screenshots)
Step 5: (pay attention to every word) Connect USB cable to your phone only. Then Press and HOLD volume down button and insert the other end of USB cable to your pc. Flashing will start automatically. Wait till you see "OK" message on your pc.
Step 6: Once you see "OK" message, disconnect your phone and reinsert your phone's battery. Turn ON your phone. The first boot will take longer than usual.
Congo! You just updated/unbricked your Micromax Canvas A1.
Feel free to post comments for any doubts and errors

My canvas a1 software has been damaged, and it shows an error while installing update from sd card , so how do I can solve this problem ???? Please reply fast........

gd5121995 said:
My canvas a1 software has been damaged, and it shows an error while installing update from sd card , so how do I can solve this problem ???? Please reply fast........
Click to expand...
Click to collapse
flash official lollipop rom using method 2 above

Hi.. I'm on CM13 now. But I don't have mobile data for some reason. So I want to flash stock ROM. But last time I tried flashing stock, it wiped my IMEI numbers. Luckily my warranty status was somehow reset. So I had to get the phone replaced. Does this have a chance to cause the same problem (wipe my IMEI numbers)??

GughanRk said:
Hi.. I'm on CM13 now. But I don't have mobile data for some reason. So I want to flash stock ROM. But last time I tried flashing stock, it wiped my IMEI numbers. Luckily my warranty status was somehow reset. So I had to get the phone replaced. Does this have a chance to cause the same problem (wipe my IMEI numbers)??
Click to expand...
Click to collapse
sp flastool wipes userdata only, you wont loose your imei using spft.

sziraqui said:
sp flastool wipes userdata only, you wont loose your imei using spft.
Click to expand...
Click to collapse
Realy sorry to say this, but I lost my IMEI using SP Flashtools only. Check this thread.. There are a lot of other users facing the same problem.
And SN Write Tool method didn't help me get my IMEI back.. So I want to be really sure before flashing this time

recover imei android one....
try this...worked for my spice android one (mi-498)
http://forum.xda-developers.com/cro...lashable-zip-imei-repair-android-one-t2992846

GughanRk said:
Realy sorry to say this, but I lost my IMEI using SP Flashtools only. Check this thread.. There are a lot of other users facing the same problem.
And SN Write Tool method didn't help me get my IMEI back.. So I want to be really sure before flashing this time
Click to expand...
Click to collapse
In that case, i would suggest you to take a backup of your imei data using MTK Droid tool. Also copy your nvram folder straight from your phone to as many external storages as you can. Nvram (imei data) somehow becomes unrecognised after downgrading some phones.
Solution:
1. Use MTK droid tool to restore it from a previous backup.
or
2. locate nvram folder ( /data/nvram, correct me if i m wrong) DELETE it. Then paste a copy of your nvram folder that you copied when imei was not lost. DONT chmod. You will most probably get your network working (ensure that sim card was PRSENT and Radios were ON during this copy paste) within few seconds. I did this to restore imei on galaxy s4.
well, i have flashed 9 different mediatek phones using spflashtool, didnt lose imei in any.

sziraqui said:
In that case, i would suggest you to take a backup of your imei data using MTK Droid tool. Also copy your nvram folder straight from your phone to as many external storages as you can. Nvram (imei data) somehow becomes unrecognised after downgrading some phones.
Solution:
1. Use MTK droid tool to restore it from a previous backup.
or
2. locate nvram folder ( /data/nvram, correct me if i m wrong) DELETE it. Then paste a copy of your nvram folder that you copied when imei was not lost. DONT chmod. You will most probably get your network working (ensure that sim card was PRSENT and Radios were during this copy paste) within few seconds. I did this to restore imei on galaxy s4.
well, i have flashed 9 different mediatek phones using spflashtool, didnt lose imei in any.
Click to expand...
Click to collapse
Thanks! I'll post an update when I come around to flashing the stock ROM. Don't have the time now.

hi can i use these update for micromax unite2(8gb) from lolipop to marshmallow.

Firmwares are device specific. You CANNOT install a this on any other phone. You will brick your phone by installing a ROM which is not made for your device

Please update stock marshmallow link sir as soon as possible
.......
Thanks in advance

Micromax android one got hang at marshmallow logo.
My micromax android one got stuck at marshmallow logo. I tried to flash lollipop using SP flash as mention above in method 2. I connect my phone . My phone is successfully detected by my PC. But SP flash show no progress. why??? I follow all steps very carefully. Or is it not possible to install lollipop if your phone already has marshmallow?

ravipreet23 said:
My micromax android one got stuck at marshmallow logo. I tried to flash lollipop using SP flash as mention above in method 2. I connect my phone . My phone is successfully detected by my PC. But SP flash show no progress. why??? I follow all steps very carefully. Or is it not possible to install lollipop if your phone already has marshmallow?
Click to expand...
Click to collapse
That means your phone was not detected. Power off your phone. Load scatter file and then click on download button on so flashtool. Put one end of USB cable to your phone. Hold volume down and simultaneously put other end of USB cable to computer. If its connected, the progress bar at bottom will show progress. I am assuming you have installed all drivers.
I hope this helps.

ravipreet23 said:
My micromax android one got stuck at marshmallow logo. I tried to flash lollipop using SP flash as mention above in method 2. I connect my phone . My phone is successfully detected by my PC. But SP flash show no progress. why??? I follow all steps very carefully. Or is it not possible to install lollipop if your phone already has marshmallow?
Click to expand...
Click to collapse
That means your phone was not detected. Power off your phone. Load scatter file and then click on download button on so flashtool. Put one end of USB cable to your phone. Hold volume down and simultaneously put other end of USB cable to computer. If its connected, the progress bar at bottom will show progress. I am assuming you have installed all drivers.
I hope this helps.

sziraqui said:
That means your phone was not detected. Power off your phone. Load scatter file and then click on download button on so flashtool. Put one end of USB cable to your phone. Hold volume down and simultaneously put other end of USB cable to computer. If its connected, the progress bar at bottom will show progress. I am assuming you have installed all drivers.
I hope this helps.
Click to expand...
Click to collapse
I have installed all drivers as my pc detect my mobile as i can see in device manager. I perform all steps that you mention but SP flash player show nothings. CAn you tell me can i flash Lollipop stock rom on my android one which is running marshmallow previously. I cant find marshmallow stock rom thats why i have to flash lollipop stock rom??

sziraqui said:
OTA links are already there on xda, but here was no specific thread for Canvas A1 so i am writing one
Google has released the OTA files for Canvas A1 and other android one devices.
NOTE: To update your phone using OTA files your phone should be running Stock lollipop or atleast stock recovery. (Not applicable if using sp flash tool)
If you are running a custom rom or custom recovery then before proceeding to this guide you must revert back to stock lollipop using sp flash tool
Pre-requisites: 1.Your phone should be atleast 60% charged
2. Back up all important data (just to be safe)
Canvas A1 users can easily update their device by following method(s)
Method 1 (the usual method):
Step 1: Download the official Marshmallow OTA file from here https://android.googleapis.com/packages/ota/google_aq4501sprout_aq4501/dc78fbefaf5f69cc4754751251d9ece094bc96e6.signed-sprout-mmx-MRA58M-from-LMY48M.zip
Step 2: Connect your smartphone to computer using the original USB cable.
Step 3: Copy and paste the OTA zip files to phone's storage and make a note of its location.
Step 4: Boot your smartphone into recovery mode or stock recovery: Disconnect the phone from computer, and then turn it off.
Press and hold both the Volume and the Power buttons until the display turns on and enters bootloader mode.
Hit the volume button to open the Recovery menu and then press the power button to select it. Your phone should now boot into recovery mode.
At this moment, a dead Android with an exclamation mark should appear on the screen. Now press and hold Power button for three seconds and then hit the Volume up button once to progress into recovery mode.
Step 5: Return to the main recovery screen and choose 'install update from sdcard'.
Step 6: Then select the OTA zip file using the volume buttons for navigation and the Power button to select any file or open a folder. After you select the zip file, confirm its installation and the update should start installing on your device.
Step 7: Once the installation is done, return to main screen of recovery. Choose Reboot system now to restart the phone and boot into the newly installed Android 6.0 Marshmallow OTA update from Google.
Voila!! You are running official Android 6.0 :laugh:
Method 2 (using sp flash tool, best method)
This method can be used even if you are running a custom rom. You can also use this method to unbrick Micromax Canvas A1.
Pre-requisites: Windows computer, USB cable, and most important "patience".
Step 1:
a) Download micromax driver.{thanks to @mohsin.r.munshi}
Extract its content, you will find an .exe file inside a folder "driver9401". Disable your antivirus and run the .exe file as administrator. (If you are using 64-bit windows, you will need to "disable driver signature enforcement". Google it)
b) Download SP Flash tool from my mediafire or from its official website. Extract it to any folder
c) Extract the the contents of factory image. [Edit: sp flashtool flashable Android 6.0 is currently not available. I 'll add a link as soon as it is available. I wrote this too early, sorry. For now, if you are running a custom rom, flash official lollipop first and then use method 1 to update to marshmallow.].You will see the following files in it.
Note the location of MT6582_Android_scatter.txt
Step2: Goto the folder where you have extracted sp flash tool. Run flash_tool.exe
Step 3: In sp flash tool, Click on "scatter loading". Then locate and select "MT6582_Android_scatter.txt". SP Flash tool will load all firmware files from the folder where you have extracted the OTA files.
Step 4: Power off your phone. And REMOVE the battery. Now on SP flash tool, click on "Download".
(refer to screenshots given on this website. Ignore the steps given on this website, just refer screenshots)
Step 5: (pay attention to every word) Connect USB cable to your phone only. Then Press and HOLD volume down button and insert the other end of USB cable to your pc. Flashing will start automatically. Wait till you see "OK" message on your pc.
Step 6: Once you see "OK" message, disconnect your phone and reinsert your phone's battery. Turn ON your phone. The first boot will take longer than usual.
Congo! You just updated/unbricked your Micromax Canvas A1.
Feel free to post comments for any doubts and errors
Click to expand...
Click to collapse
BROM error : S_FT_DOWNLOAD_FAIL[4008]
Download to flash fail. Please press ctrl +alt +T to turn on debug log then reproduce again.
Hint- BROM_DLL_V5.log and BROM_DLL.log would be created and record more detail information.
It is showing this error what should i do.?
please reply fast sir.

MayankGupta said:
BROM error : S_FT_DOWNLOAD_FAIL[4008]
Download to flash fail. Please press ctrl +alt +T to turn on debug log then reproduce again.
Hint- BROM_DLL_V5.log and BROM_DLL.log would be created and record more detail information.
It is showing this error what should i do.?
please reply fast sir.
Click to expand...
Click to collapse
I can help you if you provide me more details.
Which phone model you were dealing with? Which rom it it was running before? What were you exactly trying to achieve? Also if possible post the log files here.

xposed
can i have xposed for cm13 marshmallow ?
---------- Post added at 05:34 PM ---------- Previous post was at 04:41 PM ----------
can i have xposed for cm13 marshmallow ?

KadirDvl said:
can i have xposed for cm13 marshmallow ?
---------- Post added at 05:34 PM ---------- Previous post was at 04:41 PM ----------
can i have xposed for cm13 marshmallow ?
Click to expand...
Click to collapse
Yes there are xposed for MM.. Just google it.
[url]http://forum.xda-developers.com/xposed/discussion-xposed-marshmallow-t3249095 [/url]
Sent from my sprout4 using XDA Labs