Develop Bugs

Broke within 2 hours?

Ok, so my brand new EVO was working fine. Power save came on, and turned the screen off. I hit the power button, and you could see the backlight light up, but nothing would come on the screen.
My soution was to remove the battery, then reinsert it.
Now it just gets stuck at the white EVO screen!
Does anyone have anything that can help me with this?

Try keeping the battery out for like 5-10 minutes then put it back in. If that doesn't fix it, might have to do a Hard Reset or bring it back to the store for a new one.

Tried to hard reset, but nothing happens. It stays stuck at that screen.

Hard Reset meaning a full wipe of the phone. I think it's Vol button and Power button at same time. And then choose hard reset or something of that nature. Yeah Vol Down and Power
http://www.knowyourcell.com/htc/htc.../463924/how_to_hard_reset_the_htc_evo_4g.html

Yep, that's the procedure I went through to hard reset.
Like I said though, that didn't fix it.

Bring it back to the store then man or keep the battery out for a few minutes (if you haven't tried that yet) or possibly take SD card out?

When I take the SD card out, it comes up with some new "artwork" on the boot screen that leads me to believe it either can't be booted without this card, or ****'s just broke.. IDK.
It's like a phone with a red X on it?
That's probably not the best description, but it's close.

Ok, so this time taking the SD card out worked. It booted.

I would suggest try to bring it back asap before they run out but maybe someone else has gone through this before and help you. Sorry bro, keep us updated though
EDIT: Nice! Thought that might be it. They were having SD card errors which is why the OTA is being sent out. Glad it worked out for you

Nothing to be sorry over.
My personal opinion at this point is that the SD card got knocked loose, and wasn't seated correctly.
That seems like a horrible design. How are you supposed to see if the pins are aligned correctly?
I mean it should just slide in, but maybe it doesn't fit the tolerance every time.. IDK.
Again, to recap what I did to fix it.
I removed the SD card, reset it to factory default, and it booted.
After that, I put the SD card back in, and all is still well.
Thanks for your help xda-dev forum!

Ok, nevermind. It's still broke.
Seems like when power save comes on something gets hosed.
I'm half afraid to do the OTA update, as I want to root this thing.

Ok, I'm about 90% sure the problem is with the SD card being seated correctly.
Every time I put the card in, the phone freezes within a few minutes.
If I have no card inserted, it runs without a problem.

This is the problem the OTA fixes, you can take it back to the store and see if they will swap it but I'd be willing to bet they tell you to apply the OTA.

I did the OTA, and am still having this problem.
Took it to the store tonight, they agreed to replace it, however their systems were down, because of a storm. So I will be waiting until tomorrow i guess.

plastek said:
I did the OTA, and am still having this problem.
Took it to the store tonight, they agreed to replace it, however their systems were down, because of a storm. So I will be waiting until tomorrow i guess.
Click to expand...
Click to collapse
Whenever I do the update and restart it get's stuck in a continuous loop. I already returned the phone and they replaced it but when I did it again it did the exact same thing. I just learned and didn't install the update again :/
I don't know what I'm going to do now seems like it's stuck. If I update I don't get the latest fixes but if I do it messes up my phone and it restarts over and over again uncontrollably... bleh

Just got my replacement phone.
It seems to function properly so far.

syypher said:
Whenever I do the update and restart it get's stuck in a continuous loop. I already returned the phone and they replaced it but when I did it again it did the exact same thing. I just learned and didn't install the update again :/
I don't know what I'm going to do now seems like it's stuck. If I update I don't get the latest fixes but if I do it messes up my phone and it restarts over and over again uncontrollably... bleh
Click to expand...
Click to collapse
It might be worth doing the update in the store or having them just perform the update so they can go through all the hassle and you just get the result. It's what they get paid to do.

This time they did the update in the store before even giving me the phone.
I think they were just super swamped yesterday, and the early people didn't get updated phones.
The store guy told me I was the sixth return, but they sold "over a lot" of units.

I rooted my phone, now I want to reset it to factory default
I hold down the vol and power on, I get the white screen When I want to go in to recovery, it reboots and hangs with a pic of phone and red w/ xclamation over it
it there any other way to hard reset???

[Q] Help!! a100 Blackscreen

i have a a100 with the latest flexreaper rom installed and im stuck with a pretty serious issue:
a couple of days ago the tab was acting real slow and sluggish and getting bad battery life didnt think nothing of it so i just rebooted a couple times and left it alone . all was good untill the battery hit 10% and i plugged it up using the factory ac adapter. the next day (maybe 6-7 hours later) i went to turn it on and nothing no vibrate no screen flash nothing; other than the power button turning blue as i pressed it and it would stay on for a couple hours but still no other response from the tablet.
im at my wits end on what could be wrong and now i got my wife with her foot on my neck till i get it fixed. can anyone help me?
ive tried to do a hard reset with the reset button tried to boot into recovery /bootloader no dice
(also my home button flashed a couple time i pressed the power button) dont know if its relevant but wanna get as much info out as possible

wondering if anyone can help me...

frenize said:
wondering if anyone can help me...
Click to expand...
Click to collapse
It may take awhile for someone to see this and form something to try, random bricking for no reason is rare, its almost always some error by the user. However have you attempted adb connection to it? Leave it powered off, connect to the PC you used to unlock the boot loader then power on. Does the PC make the USB connect sound? Does the Acer vibrate? Did the home key blink again?
It really sounds like your boot partition is wrecked which wouldn't normally happen outside of flashing. If boot loader is trash then it won't know what to do and just sit there. No recovery or anything else.
Tapatalked from my Galaxy S II.

pio_masaki said:
It may take awhile for someone to see this and form something to try, random bricking for no reason is rare, its almost always some error by the user. However have you attempted adb connection to it? Leave it powered off, connect to the PC you used to unlock the boot loader then power on. Does the PC make the USB connect sound? Does the Acer vibrate? Did the home key blink again?
It really sounds like your boot partition is wrecked which wouldn't normally happen outside of flashing. If boot loader is trash then it won't know what to do and just sit there. No recovery or anything else.
Tapatalked from my Galaxy S II.
Click to expand...
Click to collapse
it made something like the connect sound but instead of the regular duh doom sound it did a dadadoom (kinda hard to describe the sound) but it was faster than ive ever heard the connect sound before which is weird. the tab didnt vibrate and it seems the home button blinks when the tab is dead and needs recharged

frenize said:
it made something like the connect sound but instead of the regular duh doom sound it did a dadadoom (kinda hard to describe the sound) but it was faster than ive ever heard the connect sound before which is weird. the tab didnt vibrate and it seems the home button blinks when the tab is dead and needs recharged
Click to expand...
Click to collapse
Yeah I know that sound it means USB connected but error for some reason. Its been shown if this thing dies all the way down it wont read the battery correctly and probably needs to be sent in. Before that I personally would unplug it open it up and remove the battery for awhile, maybe an hour then put it back and plug it in. But thats me, not the advice I'm giving. If you have warantee on it use that.
The batteries on a lot of devices and laptops etc have something of a fail safe, if the voltage drops below a certain point it trips to prevent cell damage, however it renders the battery useless.
I haven't searched out much past that if a reset is possible by us, but it seems the pack is trash after or needs sent in.
Since this is a sealed unit you void warranty opening it (well unlocking the boot loader did too) so you can't send it in for repairs without paying for it.
I hope someone can jump in and help figure this out, and prove me wrong.
Tapatalked from my Galaxy S II.

Weird, This exact same thing happened to me. Used it in the morning and now after work it won't turn on. I had already tried disconnecting the battery, but hadn't thought to leave it disconnected for an hour. My tablet has been running the leaked ICS since it came out and The last factory reset it had was about a month ago. It was working fine up until this. The power button seems to be responding correctly, the issue is that after the LEDs light up, there is no vibration or display. I hope someone can help us with this issue.
EDIT:
It won't connect in ADB mode. It will only appear on my computer as an APX device and since there is no vibration I am unable to boot into fastboot. Any help or suggestions? All the threads I have found have involved booting into fastboot.

i am also having this problem. i set ti backup last night to save to box i turned it on this morning it.worked set it on the charger came back to a frozen screen. I turned it off now just a black screen it turns on or the home button dose but nothing comes up on the screen

same thing here.
max69power said:
i am also having this problem. i set ti backup last night to save to box i turned it on this morning it.worked set it on the charger came back to a frozen screen. I turned it off now just a black screen it turns on or the home button dose but nothing comes up on the screen
Click to expand...
Click to collapse
I have been using ICS the leaked one, and last night I was goint to check my email and it did not turn on, I though the battery died. I plugged to the charger and this morning I tried to turning it on but it failed. I did the reset pin but nothing. I connected to the computer and it was recognized as a APX device and installed a driver ACER Picasso USB recover but i cant access anything. I am a nob. Thanks

A100 blackscreen
i am also having this problem. last night. just a black screen it turns on or the home button dose but nothing comes up on the screen. :crying: Help!!!!!!

Has anyone tried holding the power button for a while? Laptops do this too, if someone felt ventures, try taking the battery out and hold the power button. No promises, might work.
sent from my ICONia

same here
Having the exactly same issue, here...
I also tried to hit the hardware reset button and it does not help.

If the screen is blank while powered on its in failsafe mode, in other words is bricked, has to go to Acer.
Tapatalked from my Galaxy S II.

This just happened to me a few weeks ago as well. If you are still under warranty send it in to Acer, thats what I did. I just got an email saying they had fixed it and were sending it back for free!!
At the time I was on the 9/02 JB build. I wonder if this issue is caused by faulty hardware or if it is an issue that was made by rooting and unlocking it? I don't know enough about this stuff to answer that though, but it does make me think whether I should root/unlock it when I get it back or leave it stock.
Also thanks Pio_masaki for helping me a few weeks back wasn't sure if I was even going to send it in until you said they most likely won't be able to tell.

I highly doubt they even CARE when sending these in. They will void for physical damage most likely.

tshm55 said:
Having the exactly same issue, here...
I also tried to hit the hardware reset button and it does not help.
Click to expand...
Click to collapse
Ohmygod,
Same here, but it's 3 years ago. Sorry for digging the topic. Still no hope? I still keep the tablet and have just buy another refurbished mainboard to replace but still no vibrate and blacksreen still there.

HTC One X Update Gone Bad. HELP

Hi there, this is my first post, i didnt want it to be like this but i have come to you in desperation.
I was excited about 4 hours ago to realise my phone was getting an update saying it was going to imporve battery life etc..
Well i let it do its thing while it was downloading, i went to check after an hour or so and it said the software had been corrupted or something along those lines, either way it had to start the download again.
It was about bed time when this happened so i chucked it on the charger, fell asleep, woke up and it was doing something on a kind of screen i had never seen before, black screen, obviously showing that it is processing the update(i was a little tired from waking up) i think i remember taking its time maybe longer than it should have been.
I went back to sleep woke up about an hour ago from now and checked my phone and the screen would not turn on, i think the charger cable had fallen out from the phone because it is loose and does that some times.
So i placed the cord back in and it didnt seem to respond with the red led coming up for a while then all of a sudden it worked for some reason, but was flashing. i suspected this was because the battery had been sucked dry. So after a while the led stopped flashing and i pressed the power button, sure enough it powers up straight away to the HTC - quietly brilliant screen. And thats that, end of story. It's stuck on that screen WTF?
I have been through forums like these interested in changing ROMs and so on but it all seems so complicated i never even bothered, so obviously i am a noob, but i dont think there is any reason for this to happen other than sh*t luck.
Can anyone help us out?

Your better off sending for repair unless you want to start unlocking the bootloader etc.

Reboot your phone in bootloader ( press PowerButton + Volume down at the same time) you will get to a screen with various lines, look factory reset, navigate that menu with your volume keys. Hit factory reset you should get . See if it fixes it.

masucu said:
Reboot your phone in bootloader ( press PowerButton + Volume down at the same time) you will get to a screen with various lines, look factory reset, navigate that menu with your volume keys. Hit factory reset you should get . See if it fixes it.
Click to expand...
Click to collapse
mercccccccccccccccccccccccccccccccci

zezo_ddd said:
mercccccccccccccccccccccccccccccccci
Click to expand...
Click to collapse
Well did it work? before you say that long thanks

Thanks for your help, unfortunately, the factory reset didnt work.
What happened when i first did it, the update screen came up like the first time but still ended up freezing on the quietly brilliant screen.
I'd be willing to unlock the bootloader, i really dont want to send the phone away for a third time. Why didnt i get the Galaxy S3!?!?!
I hate to ask, can u point me to the right thread to do that, there seems to be a few but they seem to have different purposes.
Thanks again.

helter_skelter87 said:
Thanks for your help, unfortunately, the factory reset didnt work.
What happened when i first did it, the update screen came up like the first time but still ended up freezing on the quietly brilliant screen.
I'd be willing to unlock the bootloader, i really dont want to send the phone away for a third time. Why didnt i get the Galaxy S3!?!?!
I hate to ask, can u point me to the right thread to do that, there seems to be a few but they seem to have different purposes.
Thanks again.
Click to expand...
Click to collapse
If you wait a day or so, the RUU will be released for your region now that the OTA has been released.
You'll be able to fully reload your phone - this is all HTC do when you send it for repairs and you can do it in a lot less time.
At the moment, HTC may even reload the 2.17 software so you may still have the problem again when trying to load the OTA.

Thanks all for your interest.
I spoke with customer support and they told me exactly what i already had done, factory reset through hboot.
After that was a no go, he told me i have to send it back to the point of sale, so they can flash the software?
Where can i find this ruu once it has been released?

I'm pretty sure the updates all say to not have the phone plugged in when updating.
Sent from my HTC One X using xda app-developers app

[q] screen is glitchy after dropping!

Two days ago, my T-Mobile Samsung Galaxy S3 dropped out of my coat pocket as i was running for the bus. I picked it up and saw the screen was cracked along the top left and bottom left hand side. Everything was working for the past two days and i figured i'll just wait till Christmas to get a new phone. This morning i took my phone off the charger and turned it on. The Samsung logo flashed, and then the boot animation for Slimrom (the custom rom i'm currently running on) flashed for about a second but then the screen went black. I did a battery pull but the weird thing is whenever i put my battery back in, even without touching the power button, it boots up by itself but then the screen goes black again. I can access TWRP and download mode but they both go black after a few seconds as well. I was able to successfully turn on my phone and have it fully function for about 15 minutes after putting it back on the charger, but it quickly blacked out again. It also keeps randomly booting up by itself which is weird. Im guessing this is a problem with the screen itself, but could it be a software issue because the device keeps booting up by itself? If it is the screen, will i have to buy a new one or is it not worth it? I've also tried using a different battery and i have the same issue so it can't be that. Any help is appreciated!

Sounds like an issue with the power button, it probably got stuck somehow either when you dropped it, or after you dropped it. Do a simple search for power button and you will find ways to fix it!

Holy crap i didn't even think of that! It makes total sense since every time i even tap my power button, even for just a second, it turns on. I've read around that clearing the cache or a factory reset could work. Is this true?

Unlikely, unless it's a software issue but it's always a possibility. Slam the phone against something to try to get the power button back into place, or open it up and try to see if you can fix it yourself, or replace it

The problem seems to be gone. I haven't had any issues for two days now. All i did was press the power button really hard multiple times. Thanks for you help man!

[Q] Need help, Samsung Galaxy Tab 3 SM-T217S (Screen Unresponsive)

So I've had my Tab 3 for a little over 6 months now and have had no issues what-so-ever 'til now. My problem is with the screen just suddenly becoming unresponsive after locking it after use. I swiped my finger across the screen to unlock and got right back into my tablet like normal, but then once I tried to do open up applications from the Home Screen nothing happened. I tabbed lightly and swiped repeatedly trying to get a response.... nothing.
My screen LCD screen is flawless and is original, it has never been tampered with. There are no cracks or scratches or anything it just suddenly stopped working. So I figure it's a software issue, no big deal, right? Wrong. I did a soft reset by holding down the power button, it reboots and comes back to the home screen. Nothing. I figured wth I have nothing important on here, let me do a hard reset. Boot into recovery mode wipe the cache and tablet performing a hard reset. Tablet then reboots to the default setup screen to choose language. Nothing. I can't choose anything. I don't know what's wrong. Lastly, the battery was semi-low around 20% or so before this all happened. So I let it fully charge again hoping that'd help, but nothing. I'm at a loss of what to do next.
NOTE: This is all original and is stock everything. I've never modded this tablet or rooted it. I don't understand how the digitizer would just give out for no reason, it hasn't been dropped or anything.
Any other troubleshooting I can do? I've thought about installing the USB drivers and putting it into download mode to flash a custom rom or even the original to see if it'll work, but I don't want to do that unless necessary. If it is the digitizer are these hard to replace and costly?

Ta-ky said:
So I've had my Tab 3 for a little over 6 months now and have had no issues what-so-ever 'til now. My problem is with the screen just suddenly becoming unresponsive after locking it after use. I swiped my finger across the screen to unlock and got right back into my tablet like normal, but then once I tried to do open up applications from the Home Screen nothing happened. I tabbed lightly and swiped repeatedly trying to get a response.... nothing.
My screen LCD screen is flawless and is original, it has never been tampered with. There are no cracks or scratches or anything it just suddenly stopped working. So I figure it's a software issue, no big deal, right? Wrong. I did a soft reset by holding down the power button, it reboots and comes back to the home screen. Nothing. I figured wth I have nothing important on here, let me do a hard reset. Boot into recovery mode wipe the cache and tablet performing a hard reset. Tablet then reboots to the default setup screen to choose language. Nothing. I can't choose anything. I don't know what's wrong. Lastly, the battery was semi-low around 20% or so before this all happened. So I let it fully charge again hoping that'd help, but nothing. I'm at a loss of what to do next.
NOTE: This is all original and is stock everything. I've never modded this tablet or rooted it. I don't understand how the digitizer would just give out for no reason, it hasn't been dropped or anything.
Any other troubleshooting I can do? I've thought about installing the USB drivers and putting it into download mode to flash a custom rom or even the original to see if it'll work, but I don't want to do that unless necessary. If it is the digitizer are these hard to replace and costly?
Click to expand...
Click to collapse
well replace a screen digitizer require a basic set of skills on mobile repairing. However I found this on ebay (US) http://www.ebay.com/sch/i.html?_odk...en.TRS1&_nkw=T217S+screen&ghostText=&_sacat=0
but you can try to flash into latest firmware by samsung and try again