Develop Bugs

Snq-'s latest kernels and lots of freezes. What gives?

Every time I browse the web with Opera Mobile the phone eventually freezes and I can only pull the battery.
end_of_message / COMPUTOR4500

Does this only happen with opera or also with other browsers?
TouchPaled from Oxygen with Transparent XDA App

I did further testing with Dolphin HD an gingercakes kernel and it's the same story.
end_of_message / COMPUTOR4500

Are u using overclock?
Anyway that kernels use undervolt, so maybe the voltage is not enough for ur phone at high mhz..some phone can work with high undervolts, some not..

Yes, I OC'ed it at 1113600
end_of_message / COMPUTOR4500

zgomot said:
Yes, I OC'ed it at 1113600
end_of_message / COMPUTOR4500
Click to expand...
Click to collapse
then??
the solution is simple, try low oc value..every phone is bit different..some phone can reach high oc, some not

I had no issues at all with the kernel LeeDroid's HD port rom came with and this OC value. Where can I find that kernel alone? Can I extract it out of the rom zip?
end_of_message / COMPUTOR4500

Then maybe the new kernel use a low voltage for that oc value
u could reflash the rom to get back the original kernel

andQlimax; said:
u could reflash the rom to get back the original kernel
Click to expand...
Click to collapse
Oh nooo, not again.
end_of_message / COMPUTOR4500

you should not reflash rom to go back to original ld hd 's kernel.
see sqn's thread to get it or click following link
this a flashable one from
http://dl.dropbox.com/u/22152187/kernelSNQv06/v05_to_v06-img_plus_mods-upd-flash.zip
hope this help

zgomot said:
Oh nooo, not again.
end_of_message / COMPUTOR4500
Click to expand...
Click to collapse
Anyway, reflash the rom doesn't mean you have to wipe something.. Only reflash, u no lost anything.. Anyway as said, reflash the zip on the previous post
Sent from my HTC Desire

[Q] cpu stick to it's high clock on custom roms

hi i'm facing an strange problem with my cpu , i've installed myonev RC9.5_FX+ on my phone with Titanium kiss latest version kernel but after 5 or 6 hour the cpu clock sticks to its high level and phone work a bit slow specially in install or uninstalling apps . i have tested the stock kernel but it was awefull and the same problem on slim bean jellybean rom .
i have tasted all of governor and even it normal values but i'm facing this issue after 5 or 6 hour again untill i restart the phone to work for 5 or 6 hour .
can anyone suggest me to make it right ?
I really don't know what is the problem .
my phone : htc one v
unlocked
s-on

fallen.69 said:
hi i'm facing an strange problem with my cpu , i've installed myonev RC9.5_FX+ on my phone with Titanium kiss latest version kernel but after 5 or 6 hour the cpu clock sticks to its high level and phone work a bit slow specially in install or uninstalling apps . i have tested the stock kernel but it was awefull and the same problem on slim bean jellybean rom .
i have tasted all of governor and even it normal values but i'm facing this issue after 5 or 6 hour again untill i restart the phone to work for 5 or 6 hour .
can anyone suggest me to make it right ?
I really don't know what is the problem .
my phone : htc one v
unlocked
s-on
Click to expand...
Click to collapse
myONEv raise CPU speed up to 1,497 MHz... you need an app to control your CPU, like SetCPU, No Frills CPU Control or Trickster Mod... then you'll be able to decrease your CPU speed

parkourz said:
myONEv raise CPU speed up to 1,497 MHz... you need an app to control your CPU, like SetCPU, No Frills CPU Control or Trickster Mod... then you'll be able to decrease your CPU speed
Click to expand...
Click to collapse
i'm using SetCPU with PimpMyRom to control my CPU after i installed the rom but it doesn't work . after 5 or 6 hour it stick to 1.497 MHz.

fallen.69 said:
i'm using SetCPU with PimpMyRom to control my CPU after i installed the rom but it doesn't work . after 5 or 6 hour it stick to 1.497 MHz.
Click to expand...
Click to collapse
If it's changing after reboot, then in SetCPU you have to check "Set on boot" option

parkourz said:
If it's changing after reboot, then in SetCPU you have to check "Set on boot" option
Click to expand...
Click to collapse
I know and I've done it already. but the result is the same .
this is a screenshot from my phone :

fallen.69 said:
I know and I've done it already. but the result is the same .
this is a screenshot from my phone :
Click to expand...
Click to collapse
You're right, that's very strange... try to reflash kernel and ROM with full wipe and post results... or try Ignorance V4, it's faster and less laggy than myONEv

parkourz said:
You're right, that's very strange... try to reflash kernel and ROM with full wipe and post results... or try Ignorance V4, it's faster and less laggy than myONEv
Click to expand...
Click to collapse
is it possible that this probles is related to the kernel or not it is related to the rom ? as i said I've tested slim bean jellybean rom and I had the same problem on it .
and is it possible that I flash the kernel without formating the rom or doing the wipe ? does it work or i need to reinstall the rom ?

fallen.69 said:
is it possible that this probles is related to the kernel or not it is related to the rom ? as i said I've tested slim bean jellybean rom and I had the same problem on it .
and is it possible that I flash the kernel without formating the rom or doing the wipe ? does it work or i need to reinstall the rom ?
Click to expand...
Click to collapse
flash SuperSU and try.

MameTozhio said:
flash SuperSU and try.
Click to expand...
Click to collapse
I'm downloading ignorance v4 right now !
this might sound silly but I forgot how to flash SuperSU can you help me with it ?

fallen.69 said:
I'm downloading ignorance v4 right now !
this might sound silly but I forgot how to flash SuperSU can you help me with it ?
Click to expand...
Click to collapse
http://download.chainfire.eu/370/SuperSU/UPDATE-SuperSU-v1.80.zip click Download UPDATE-Supersu blah blah blah etc.

MameTozhio said:
http://download.chainfire.eu/370/SuperSU/UPDATE-SuperSU-v1.80.zip click Download UPDATE-Supersu blah blah blah etc.
Click to expand...
Click to collapse
I'm already using SuperSu v1.80 , what i meant in the last post was should i reflash the superSu ? and how ? or just unistall & reinstall it ?

fallen.69 said:
I'm already using SuperSu v1.80 , what i meant in the last post was should i reflash the superSu ? and how ? or just unistall & reinstall it ?
Click to expand...
Click to collapse
Oh, I thought the problem might have been the superuser app.never mind.
Sent from my Nexus 4 using Tapatalk

parkourz said:
You're right, that's very strange... try to reflash kernel and ROM with full wipe and post results... or try Ignorance V4, it's faster and less laggy than myONEv
Click to expand...
Click to collapse
thanks to you parkourz . I've installed ignorance v4 everything work very smooth and fast and the cpu works normally . for about 2 hour i have put the phone under presser but still working normal and fast .
I think the problem was related to MyOneV rom. but if i face that strange problem again i will let you know .

fallen.69 said:
thanks to you parkourz . I've installed ignorance v4 everything work very smooth and fast and the cpu works normally . for about 2 hour i have put the phone under presser but still working normal and fast .
I think the problem was related to MyOneV rom. but if i face that strange problem again i will let you know .
Click to expand...
Click to collapse
I wonder why CPU was coming back to 1,5Ghz after reboot on myONEv...

The governor that is in use makes a huge difference in the running speed. Some will cause the phone to use the maximum speed that you set all the time
Sent from a phone that's running a ROM

[Q] Max frequency locked at 1300MHz

I'm currently using ARHD 33.1 and flashed the lONELyX #022 kernel, but my maximum frequency is capped at 1.3 Ghz.
Powersave is off and i've disabled EDP limitation and disabled the cap at 1.3GHz, but i still can't achieve 1.5GHz, can anyone tell me why this isnt working?
I've searched through the kernel thread but others seem to be able to get to 1.4 or 1.5, and I can't find an answer

Titan49 said:
I'm currently using ARHD 33.1 and flashed the lONELyX #022 kernel, but my maximum frequency is capped at 1.3 Ghz.
Powersave is off and i've disabled EDP limitation and disabled the cap at 1.3GHz, but i still can't achieve 1.5GHz, can anyone tell me why this isnt working?
I've searched through the kernel thread but others seem to be able to get to 1.4 or 1.5, and I can't find an answer
Click to expand...
Click to collapse
Your kernel may not support 1.5ghz or there's a problem with the overclocking app your using.
Give me the link of the thread!

f_u_006 said:
Your kernel may not support 1.5ghz or there's a problem with the overclocking app your using.
Give me the link of the thread!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2586808
I'm using LI seria boot img

Titan49 said:
http://forum.xda-developers.com/showthread.php?t=2586808
I'm using LI seria boot img
Click to expand...
Click to collapse
i used it till yesterday evening and 1.5 GHz was working... does it happen only with #22 LI? did you use UV or normal version? have you installed custom apps that can handle CPU max freq? have you tried to flash it again/another kernel/another kernel version and/or another hotplug?

lukes91 said:
i used it till yesterday evening and 1.5 GHz was working... does it happen only with #22 LI? did you use UV or normal version? have you installed custom apps that can handle CPU max freq? have you tried to flash it again/another kernel/another kernel version and/or another hotplug?
Click to expand...
Click to collapse
Used the non UV version, I have SetCPU installed to handle the freq, i can set it to 1.5GHz, but it doesnt go above 1.3, even on performance governor, i've flashed different versions of this kernel, LS, LM, but none let me go to 1.5GHz.

Titan49 said:
Used the non UV version, I have SetCPU installed to handle the freq, i can set it to 1.5GHz, but it doesnt go above 1.3, even on performance governor, i've flashed different versions of this kernel, LS, LM, but none let me go to 1.5GHz.
Click to expand...
Click to collapse
Have you tried other kernels? For example Alex's ones... Just to check if it's kernel related...
Sent from Somewhere Over The Rainbow...

lukes91 said:
Have you tried other kernels? For example Alex's ones... Just to check if it's kernel related...
Sent from Somewhere Over The Rainbow...
Click to expand...
Click to collapse
Isn't it discontinued? Or is it still compatible with the latest version of ARHD?

Titan49 said:
Isn't it discontinued? Or is it still compatible with the latest version of ARHD?
Click to expand...
Click to collapse
It's discontinued, but i think it will work as i used it on ViperX (both 4.2.2 and sense 5) do a nandroid and test it
Sent from Somewhere Over The Rainbow...

lukes91 said:
It's discontinued, but i think it will work as i used it on ViperX (both 4.2.2 and sense 5) do a nandroid and test it
Sent from Somewhere Over The Rainbow...
Click to expand...
Click to collapse
That worked, thanks for that, any idea why it wont work on the other kernel?

Titan49 said:
That worked, thanks for that, any idea why it wont work on the other kernel?
Click to expand...
Click to collapse
could you post the content of your /etc/init.d/55sw2wake file after flashing lyapota's kernel?

Phone turn off

Hi my HOX is turning off or rebooting couple times in a day, can I check somehow what is causing this? Is it ROM, or some app?

nyorbee said:
Hi my HOX is turning off or rebooting couple times in a day, can I check somehow what is causing this? Is it ROM, or some app?
Click to expand...
Click to collapse
we need more infos: rooted? if so, rom/kernel/? have you installed mods/custom task or triggers that can reboot the device?

lukes91 said:
we need more infos: rooted? if so, rom/kernel/? have you installed mods/custom task or triggers that can reboot the device?
Click to expand...
Click to collapse
Kernel Next Ep10.0 [Intelliplug] and ROM [30/03/2014] [ROM] [Unofficial] Beanstalk 4.4.2 KITKAT for the HTC One X. I have just couple of standard apps, none of them shoul cause reboots...

Why not flash another rom to test for a while. Preferably a stock like sense 5 rom.....rule out hardware is easy to do yourself

nyorbee said:
Kernel Next Ep10.0 [Intelliplug] and ROM [30/03/2014] [ROM] [Unofficial] Beanstalk 4.4.2 KITKAT for the HTC One X. I have just couple of standard apps, none of them shoul cause reboots...
Click to expand...
Click to collapse
Mr Hofs is right... Just give me another info: have you undervolted your phone? Which is your tegra3 variant? Your mv @1.5GHz?
Sent from Somewhere Over The Rainbow...

lukes91 said:
Mr Hofs is right... Just give me another info: have you undervolted your phone? Which is your tegra3 variant? Your mv @1.5GHz?
Sent from Somewhere Over The Rainbow...
Click to expand...
Click to collapse
I didn't do anything just stock ROM settings

nyorbee said:
I didn't do anything just stock ROM settings
Click to expand...
Click to collapse
Ok... I never tried that kernel, but if it"s undervolted and your phone can't handle too much uv it might reboot itself... This is why i asked you the voltage @1.5GHz and the cpu variant... Anyway you could try to increase voltages by 25 mv and see if it's stable... Or follow Mr Hofs' suggestion...
Sent from Somewhere Over The Rainbow...

lukes91 said:
Ok... I never tried that kernel, but if it"s undervolted and your phone can't handle too much uv it might reboot itself... This is why i asked you the voltage @1.5GHz and the cpu variant... Anyway you could try to increase voltages by 25 mv and see if it's stable... Or follow Mr Hofs' suggestion...
Sent from Somewhere Over The Rainbow...
Click to expand...
Click to collapse
Can u tell me If this ROM hs UV by default? If not I will try this one and see if phone won't reboot

nyorbee said:
Can u tell me If this ROM hs UV by default? If not I will try this one and see if phone won't reboot
Click to expand...
Click to collapse
read the OP of the rom thread....we do not have to read that for you ! Look for that info and check it out.....

nyorbee said:
Can u tell me If this ROM hs UV by default? If not I will try this one and see if phone won't reboot
Click to expand...
Click to collapse
Uv is managed by kernel, not rom... Anyway, if you flash a sense 5 rom close to stock and leave the default kernel you should be fine... Try something like arhd, maximus HD or lonelyx as they are very similar to stock...
Sent from Somewhere Over The Rainbow...

Mr Hofs said:
read the OP of the rom thread....we do not have to read that for you ! Look for that info and check it out.....
Click to expand...
Click to collapse
I don't see any info about that I've read it...

lukes91 said:
Uv is managed by kernel, not rom... Anyway, if you flash a sense 5 rom close to stock and leave the default kernel you should be fine... Try something like arhd, maximus HD or lonelyx as they are very similar to stock...
Sent from Somewhere Over The Rainbow...
Click to expand...
Click to collapse
Yes but I want KK and stock android, And I don't see if this ROM that I want has Uv in kernel by default or not....

We can't fix this for you, you nave to follow our suggestions to discover the issue's origin and to fix it... Search xda to collect more infos about the rom/kernel you are using....
Sent from Somewhere Over The Rainbow...

Antutu score of your tweaked device

hii guys post ur score screenshots
and share what u guys are using to get maximum performance
this will help combine all the best tweaks and make our phone better
My antutu score is 19717 and i am using a custom build of Ultimate rom V 2Z
will post my screens and tweaks in sum
so lets get tweaking

I tried flashing V2 and the keyboard keeps crashing on that rom. Can you check that on the rom ?

gautam703 said:
I tried flashing V2 and the keyboard keeps crashing on that rom. Can you check that on the rom ?
Click to expand...
Click to collapse
go to settings>apps>all apps>xperia keyboard>clear data and cache>force stop

Ashwin Prabhunerurkar said:
go to settings>apps>all apps>xperia keyboard>clear data and cache>force stop
Click to expand...
Click to collapse
Well as soon as i flashed the V2 i cant pass the setup menu. It requires me to use the keyboard, and it's crashing.

go to recovery and select advance backup and only select data
then wipe data after backup
and when after u done with setup
restore data again

Stock rom. Rooted. Unlocked bootloader. Using Greenify, nothing else
Sent from my D5322 using XDA Premium 4 mobile app

Ashwin Prabhunerurkar said:
hii guys post ur score screenshots
and share what u guys are using to get maximum performance
this will help combine all the best tweaks and make our phone better
My antutu score is 19717 and i am using a custom build of Ultimate rom V 2Z
will post my screens and tweaks in sum
so lets get tweaking
Click to expand...
Click to collapse
My Antutu score is 20179 with stock Sony ROM, Maximus Kernel overclocked to 1.6 GHz.

charming.arpit said:
My Antutu score is 20179 with stock Sony ROM, Maximus Kernel overclocked to 1.6 GHz.
Click to expand...
Click to collapse
which tweaks,governor,io are you using?

Ashwin Prabhunerurkar said:
which tweaks,governor,io are you using?
Click to expand...
Click to collapse
I am using maximus kernel with 253 stock rom. The governor is ondemand and CPU is overclocked to 1.6 ghz