Develop Bugs

[ROM] HO!NO! P936 Full stock

Thanks to dczz from bbs.gfan that release the source.
I add in this Rom my kernel v1 and tweak from my last Rom everything else is stock from LGP936. (P936 Baseband & Firmware will be flash in your phone too)
Note: This Rom will work on Bell Optimus LTE without problem. Do not use on LU6200.
but if you use other carrier you will need to change apn.
(The way it work for me is to change apn in system/etc/apn.conf with root explorer and in settings-Wireless & networks-Mobile networks-Access Point Names Reset to default.)
Don't forget to full wipe before using this rom and maybe a backup of your firmware and baseband with adb will be of good use if something goes wrong.
HO!NO!_Rom_Bell_Optimus_LTE-P936_Full_stock_signed.zip

Are you planning to make it custom with replacement of icons and other stuff like your HO!NO! ROM from stock Bell?

I know it says bell optimus lte, but will it work for att nitro?
Sent from my LG-p930 Nitro CM9

kumayam said:
I know it says bell optimus lte, but will it work for att nitro?
Sent from my LG-p930 Nitro CM9
Click to expand...
Click to collapse
It should work on nitro hd
Sent from my LG-P936 using xda premium

Cromson said:
Are you planning to make it custom with replacement of icons and other stuff like your HO!NO! ROM from stock Bell?
Click to expand...
Click to collapse
Only if i got demand for it...
Sent from my LG-P936 using xda premium

kumayam said:
I know it says bell optimus lte, but will it work for att nitro?
Sent from my LG-p930 Nitro CM9
Click to expand...
Click to collapse
Works great on ATT Nitro HD. Much better than stock.

Got it working on LU6200 with replacing boot.img, firmware.img and baseband.img. But after restoring Titanium Backup (no system files) i got lots of FC errors. Back on your V1b now, so far the best ROM for me... altough I really would like to use german language.
sent from LG-LU6200

How's the color banding on the p936 rom? =)

Cromson said:
Got it working on LU6200 with replacing boot.img, firmware.img and baseband.img. But after restoring Titanium Backup (no system files) i got lots of FC errors. Back on your V1b now, so far the best ROM for me... altough I really would like to use german language.
sent from LG-LU6200
Click to expand...
Click to collapse
Could you please point me to where i can download the"boot.img, firmware.img and baseband.img" .
thanks in advance.

Here you go:
boot.img / baseband.img / firmware.img (141 original) by ali_alex (http://forum.xda-developers.com/showthread.php?p=25589546#post25589546)
https://www.box.com/s/53b8ca061b9bcc842704
boot.img (from HO!NO! Kernel V1 for LU6200)
https://www.box.com/s/d6912a5562560881ac43
boot.img / baseband.img / firmware.img (original stock LU6200) from bbs.gfan.com
128:
https://www.box.com/s/c34f9112f1dbeb1f77bf
141:
https://www.box.com/s/5d129eaf79085d33edab
ICS:
https://www.box.com/s/a60ad4c2696cc655ae84

Cromson said:
Here you go:
boot.img / baseband.img / firmware.img (141 original) by ali_alex (http://forum.xda-developers.com/showthread.php?p=25589546#post25589546)
https://www.box.com/s/53b8ca061b9bcc842704
boot.img (HO!NO! incl. Kernel V1 for LU6200)
https://www.box.com/s/d6912a5562560881ac43
boot.img (original)
...uploading
baseband.img (141 original)
...uploading
firmware.img (128 original)
...uploading
Click to expand...
Click to collapse
For su640 please !

Sorry, no info at the moment for your SU640... but i will check it out.
Will make a new thread in the LU6200 development section, since this thread here is HO!NO!'s.

Thank you very much Cromson,you saved my day.

Your welcome!

Can I flash it on Korean SU640 ? Thanks

Is it possible to have this rom w/ a working p930 kernel? For some odd reason, HO!NO! kernel gives me random reboots and boot loops... have to pull the battery everytime....
Note: I think its the kernel cuz it only happens when i install the kernel, whether it's on stock rom, p936 rom, or kernelpan1c's rom... Before installing, i've wiped everything, including dalvik-cache

lilbluemirage said:
Is it possible to have this rom w/ a working p930 kernel? For some odd reason, HO!NO! kernel gives me random reboots and boot loops... have to pull the battery everytime....
Note: I think its the kernel cuz it only happens when i install the kernel, whether it's on stock rom, p936 rom, or kernelpan1c's rom... Before installing, i've wiped everything, including dalvik-cache
Click to expand...
Click to collapse
Did you try installing SetCPU to lower the max CPU frequency to see if it is stable like that?

drumist said:
Did you try installing SetCPU to lower the max CPU frequency to see if it is stable like that?
Click to expand...
Click to collapse
yup... i've tried lowering the max to 1500ish and i've tried upping the min to 500ish

lilbluemirage said:
yup... i've tried lowering the max to 1500ish and i've tried upping the min to 500ish
Click to expand...
Click to collapse
Try going to something substantially lower than stock, like 1200MHz.
HO!NO!'s kernel undervolts the CPU, which seems to work fine for most people but may not be working for you. The thing about undervolting is that every CPU is slightly different, and you may have just been unlucky and gotten a device that can't handle undervolting the CPU without becoming unstable.
Anyway, if that DOES improve the stability, I'd suggest you ask HO!NO! if he can release the original stock P936 kernel and/or a version of his kernel without undervolting enabled which would most likely be stable for you.
Actually you might just be able to disable undervolting in SetCPU.

HO!NO! said:
Thanks to dczz from bbs.gfan that release the source.
Click to expand...
Click to collapse
Could you post links to the source?
And I‘d like to know how I can change permissions of /system folder without root?

[Q] cpu stick to it's high clock on custom roms

hi i'm facing an strange problem with my cpu , i've installed myonev RC9.5_FX+ on my phone with Titanium kiss latest version kernel but after 5 or 6 hour the cpu clock sticks to its high level and phone work a bit slow specially in install or uninstalling apps . i have tested the stock kernel but it was awefull and the same problem on slim bean jellybean rom .
i have tasted all of governor and even it normal values but i'm facing this issue after 5 or 6 hour again untill i restart the phone to work for 5 or 6 hour .
can anyone suggest me to make it right ?
I really don't know what is the problem .
my phone : htc one v
unlocked
s-on

fallen.69 said:
hi i'm facing an strange problem with my cpu , i've installed myonev RC9.5_FX+ on my phone with Titanium kiss latest version kernel but after 5 or 6 hour the cpu clock sticks to its high level and phone work a bit slow specially in install or uninstalling apps . i have tested the stock kernel but it was awefull and the same problem on slim bean jellybean rom .
i have tasted all of governor and even it normal values but i'm facing this issue after 5 or 6 hour again untill i restart the phone to work for 5 or 6 hour .
can anyone suggest me to make it right ?
I really don't know what is the problem .
my phone : htc one v
unlocked
s-on
Click to expand...
Click to collapse
myONEv raise CPU speed up to 1,497 MHz... you need an app to control your CPU, like SetCPU, No Frills CPU Control or Trickster Mod... then you'll be able to decrease your CPU speed

parkourz said:
myONEv raise CPU speed up to 1,497 MHz... you need an app to control your CPU, like SetCPU, No Frills CPU Control or Trickster Mod... then you'll be able to decrease your CPU speed
Click to expand...
Click to collapse
i'm using SetCPU with PimpMyRom to control my CPU after i installed the rom but it doesn't work . after 5 or 6 hour it stick to 1.497 MHz.

fallen.69 said:
i'm using SetCPU with PimpMyRom to control my CPU after i installed the rom but it doesn't work . after 5 or 6 hour it stick to 1.497 MHz.
Click to expand...
Click to collapse
If it's changing after reboot, then in SetCPU you have to check "Set on boot" option

parkourz said:
If it's changing after reboot, then in SetCPU you have to check "Set on boot" option
Click to expand...
Click to collapse
I know and I've done it already. but the result is the same .
this is a screenshot from my phone :

fallen.69 said:
I know and I've done it already. but the result is the same .
this is a screenshot from my phone :
Click to expand...
Click to collapse
You're right, that's very strange... try to reflash kernel and ROM with full wipe and post results... or try Ignorance V4, it's faster and less laggy than myONEv

parkourz said:
You're right, that's very strange... try to reflash kernel and ROM with full wipe and post results... or try Ignorance V4, it's faster and less laggy than myONEv
Click to expand...
Click to collapse
is it possible that this probles is related to the kernel or not it is related to the rom ? as i said I've tested slim bean jellybean rom and I had the same problem on it .
and is it possible that I flash the kernel without formating the rom or doing the wipe ? does it work or i need to reinstall the rom ?

fallen.69 said:
is it possible that this probles is related to the kernel or not it is related to the rom ? as i said I've tested slim bean jellybean rom and I had the same problem on it .
and is it possible that I flash the kernel without formating the rom or doing the wipe ? does it work or i need to reinstall the rom ?
Click to expand...
Click to collapse
flash SuperSU and try.

MameTozhio said:
flash SuperSU and try.
Click to expand...
Click to collapse
I'm downloading ignorance v4 right now !
this might sound silly but I forgot how to flash SuperSU can you help me with it ?

fallen.69 said:
I'm downloading ignorance v4 right now !
this might sound silly but I forgot how to flash SuperSU can you help me with it ?
Click to expand...
Click to collapse
http://download.chainfire.eu/370/SuperSU/UPDATE-SuperSU-v1.80.zip click Download UPDATE-Supersu blah blah blah etc.

MameTozhio said:
http://download.chainfire.eu/370/SuperSU/UPDATE-SuperSU-v1.80.zip click Download UPDATE-Supersu blah blah blah etc.
Click to expand...
Click to collapse
I'm already using SuperSu v1.80 , what i meant in the last post was should i reflash the superSu ? and how ? or just unistall & reinstall it ?

fallen.69 said:
I'm already using SuperSu v1.80 , what i meant in the last post was should i reflash the superSu ? and how ? or just unistall & reinstall it ?
Click to expand...
Click to collapse
Oh, I thought the problem might have been the superuser app.never mind.
Sent from my Nexus 4 using Tapatalk

parkourz said:
You're right, that's very strange... try to reflash kernel and ROM with full wipe and post results... or try Ignorance V4, it's faster and less laggy than myONEv
Click to expand...
Click to collapse
thanks to you parkourz . I've installed ignorance v4 everything work very smooth and fast and the cpu works normally . for about 2 hour i have put the phone under presser but still working normal and fast .
I think the problem was related to MyOneV rom. but if i face that strange problem again i will let you know .

fallen.69 said:
thanks to you parkourz . I've installed ignorance v4 everything work very smooth and fast and the cpu works normally . for about 2 hour i have put the phone under presser but still working normal and fast .
I think the problem was related to MyOneV rom. but if i face that strange problem again i will let you know .
Click to expand...
Click to collapse
I wonder why CPU was coming back to 1,5Ghz after reboot on myONEv...

The governor that is in use makes a huge difference in the running speed. Some will cause the phone to use the maximum speed that you set all the time
Sent from a phone that's running a ROM

[Q] Max frequency locked at 1300MHz

I'm currently using ARHD 33.1 and flashed the lONELyX #022 kernel, but my maximum frequency is capped at 1.3 Ghz.
Powersave is off and i've disabled EDP limitation and disabled the cap at 1.3GHz, but i still can't achieve 1.5GHz, can anyone tell me why this isnt working?
I've searched through the kernel thread but others seem to be able to get to 1.4 or 1.5, and I can't find an answer

Titan49 said:
I'm currently using ARHD 33.1 and flashed the lONELyX #022 kernel, but my maximum frequency is capped at 1.3 Ghz.
Powersave is off and i've disabled EDP limitation and disabled the cap at 1.3GHz, but i still can't achieve 1.5GHz, can anyone tell me why this isnt working?
I've searched through the kernel thread but others seem to be able to get to 1.4 or 1.5, and I can't find an answer
Click to expand...
Click to collapse
Your kernel may not support 1.5ghz or there's a problem with the overclocking app your using.
Give me the link of the thread!

f_u_006 said:
Your kernel may not support 1.5ghz or there's a problem with the overclocking app your using.
Give me the link of the thread!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2586808
I'm using LI seria boot img

Titan49 said:
http://forum.xda-developers.com/showthread.php?t=2586808
I'm using LI seria boot img
Click to expand...
Click to collapse
i used it till yesterday evening and 1.5 GHz was working... does it happen only with #22 LI? did you use UV or normal version? have you installed custom apps that can handle CPU max freq? have you tried to flash it again/another kernel/another kernel version and/or another hotplug?

lukes91 said:
i used it till yesterday evening and 1.5 GHz was working... does it happen only with #22 LI? did you use UV or normal version? have you installed custom apps that can handle CPU max freq? have you tried to flash it again/another kernel/another kernel version and/or another hotplug?
Click to expand...
Click to collapse
Used the non UV version, I have SetCPU installed to handle the freq, i can set it to 1.5GHz, but it doesnt go above 1.3, even on performance governor, i've flashed different versions of this kernel, LS, LM, but none let me go to 1.5GHz.

Titan49 said:
Used the non UV version, I have SetCPU installed to handle the freq, i can set it to 1.5GHz, but it doesnt go above 1.3, even on performance governor, i've flashed different versions of this kernel, LS, LM, but none let me go to 1.5GHz.
Click to expand...
Click to collapse
Have you tried other kernels? For example Alex's ones... Just to check if it's kernel related...
Sent from Somewhere Over The Rainbow...

lukes91 said:
Have you tried other kernels? For example Alex's ones... Just to check if it's kernel related...
Sent from Somewhere Over The Rainbow...
Click to expand...
Click to collapse
Isn't it discontinued? Or is it still compatible with the latest version of ARHD?

Titan49 said:
Isn't it discontinued? Or is it still compatible with the latest version of ARHD?
Click to expand...
Click to collapse
It's discontinued, but i think it will work as i used it on ViperX (both 4.2.2 and sense 5) do a nandroid and test it
Sent from Somewhere Over The Rainbow...

lukes91 said:
It's discontinued, but i think it will work as i used it on ViperX (both 4.2.2 and sense 5) do a nandroid and test it
Sent from Somewhere Over The Rainbow...
Click to expand...
Click to collapse
That worked, thanks for that, any idea why it wont work on the other kernel?

Titan49 said:
That worked, thanks for that, any idea why it wont work on the other kernel?
Click to expand...
Click to collapse
could you post the content of your /etc/init.d/55sw2wake file after flashing lyapota's kernel?

Phone turn off

Hi my HOX is turning off or rebooting couple times in a day, can I check somehow what is causing this? Is it ROM, or some app?

nyorbee said:
Hi my HOX is turning off or rebooting couple times in a day, can I check somehow what is causing this? Is it ROM, or some app?
Click to expand...
Click to collapse
we need more infos: rooted? if so, rom/kernel/? have you installed mods/custom task or triggers that can reboot the device?

lukes91 said:
we need more infos: rooted? if so, rom/kernel/? have you installed mods/custom task or triggers that can reboot the device?
Click to expand...
Click to collapse
Kernel Next Ep10.0 [Intelliplug] and ROM [30/03/2014] [ROM] [Unofficial] Beanstalk 4.4.2 KITKAT for the HTC One X. I have just couple of standard apps, none of them shoul cause reboots...

Why not flash another rom to test for a while. Preferably a stock like sense 5 rom.....rule out hardware is easy to do yourself

nyorbee said:
Kernel Next Ep10.0 [Intelliplug] and ROM [30/03/2014] [ROM] [Unofficial] Beanstalk 4.4.2 KITKAT for the HTC One X. I have just couple of standard apps, none of them shoul cause reboots...
Click to expand...
Click to collapse
Mr Hofs is right... Just give me another info: have you undervolted your phone? Which is your tegra3 variant? Your mv @1.5GHz?
Sent from Somewhere Over The Rainbow...

lukes91 said:
Mr Hofs is right... Just give me another info: have you undervolted your phone? Which is your tegra3 variant? Your mv @1.5GHz?
Sent from Somewhere Over The Rainbow...
Click to expand...
Click to collapse
I didn't do anything just stock ROM settings

nyorbee said:
I didn't do anything just stock ROM settings
Click to expand...
Click to collapse
Ok... I never tried that kernel, but if it"s undervolted and your phone can't handle too much uv it might reboot itself... This is why i asked you the voltage @1.5GHz and the cpu variant... Anyway you could try to increase voltages by 25 mv and see if it's stable... Or follow Mr Hofs' suggestion...
Sent from Somewhere Over The Rainbow...

lukes91 said:
Ok... I never tried that kernel, but if it"s undervolted and your phone can't handle too much uv it might reboot itself... This is why i asked you the voltage @1.5GHz and the cpu variant... Anyway you could try to increase voltages by 25 mv and see if it's stable... Or follow Mr Hofs' suggestion...
Sent from Somewhere Over The Rainbow...
Click to expand...
Click to collapse
Can u tell me If this ROM hs UV by default? If not I will try this one and see if phone won't reboot

nyorbee said:
Can u tell me If this ROM hs UV by default? If not I will try this one and see if phone won't reboot
Click to expand...
Click to collapse
read the OP of the rom thread....we do not have to read that for you ! Look for that info and check it out.....

nyorbee said:
Can u tell me If this ROM hs UV by default? If not I will try this one and see if phone won't reboot
Click to expand...
Click to collapse
Uv is managed by kernel, not rom... Anyway, if you flash a sense 5 rom close to stock and leave the default kernel you should be fine... Try something like arhd, maximus HD or lonelyx as they are very similar to stock...
Sent from Somewhere Over The Rainbow...

Mr Hofs said:
read the OP of the rom thread....we do not have to read that for you ! Look for that info and check it out.....
Click to expand...
Click to collapse
I don't see any info about that I've read it...

lukes91 said:
Uv is managed by kernel, not rom... Anyway, if you flash a sense 5 rom close to stock and leave the default kernel you should be fine... Try something like arhd, maximus HD or lonelyx as they are very similar to stock...
Sent from Somewhere Over The Rainbow...
Click to expand...
Click to collapse
Yes but I want KK and stock android, And I don't see if this ROM that I want has Uv in kernel by default or not....

We can't fix this for you, you nave to follow our suggestions to discover the issue's origin and to fix it... Search xda to collect more infos about the rom/kernel you are using....
Sent from Somewhere Over The Rainbow...

[HELP] does anybody know why setcpu keeps changing my cpu freqenzie

i normally have SetCPU on 1250 with performance and sioplus
BUT SetCPU keeps changing it back to 800 and i have to keep
changing it back 1250
im using this ROM; http://forum.xda-developers.com/showthread.php?t=2555021
i HAVE NOT changed the kernel using the one supplied with the ROM
ROOTED phone obviously
SetCPU changing freqenzies is becoming annoying as i play alot of games and when it changes it lags my games
any idea's on how to fix it? :fingers-crossed:

milky1223 said:
i normally have SetCPU on 1250 with performance and sioplus
BUT SetCPU keeps changing it back to 800 and i have to keep
changing it back 1250
im using this ROM; http://forum.xda-developers.com/showthread.php?t=2555021
i HAVE NOT changed the kernel using the one supplied with the ROM
ROOTED phone obviously
SetCPU changing freqenzies is becoming annoying as i play alot of games and when it changes it lags my games
any idea's on how to fix it? :fingers-crossed:
Click to expand...
Click to collapse
Use another tool! SetCPU is buggy. You should try CM11 + kernel by @ace2nutzer. Use android's performance settings to set cpu clock and nova thor settings to set gpu clock. GPU can be stable overclocked to 680MHz

LS.xD said:
Use another tool! SetCPU is buggy. You should try CM11 + kernel by @ace2nutzer. Use android's performance settings to set cpu clock and nova thor settings to set gpu clock. GPU can be stable overclocked to 680MHz
Click to expand...
Click to collapse
can you give me a link? and is the same cm11 or different?

milky1223 said:
can you give me a link? and is the same cm11 or different?
Click to expand...
Click to collapse
optimized by ace2nutzer --> THREAD --> rom and kernel can be found on the FTP server

LS.xD said:
optimized by ace2nutzer --> THREAD --> rom and kernel can be found on the FTP server
Click to expand...
Click to collapse
where do i actually download it witch files got confused about this earlier, when i was looking at it couldnt find the right file to download for both

milky1223 said:
where do i actually download it witch files got confused about this earlier, when i was looking at it couldnt find the right file to download for both
Click to expand...
Click to collapse
is your phone 8160 or 8160P (P variant has NFC) ?

LS.xD said:
is your phone 8160 or 8160P (P variant has NFC) ?
Click to expand...
Click to collapse
8160 version never nknew there was P a version whats the difference?

milky1223 said:
8160 version never nknew there was P a version whats the difference?
Click to expand...
Click to collapse
P has NFC as I said,
ROM + KERNEL

LS.xD said:
P has NFC as I said,
cheers and do i need to clear both cache's and reset all data before installing and witch order i install them?
rom + kernel 0r other way?
Click to expand...
Click to collapse

milky1223 said:
LS.xD said:
P has NFC as I said,
cheers and do i need to clear both cache's and reset all data before installing and witch order i install them?
rom + kernel 0r other way?
Click to expand...
Click to collapse
full wipe is recommended. But you can try to dirty flash it by only wipe caches before flashing. First flash the rom, then flash the kernel.
Click to expand...
Click to collapse

LS.xD said:
milky1223 said:
full wipe is recommended. But you can try to dirty flash it by only wipe caches before flashing. First flash the rom, then flash the kernel.
Click to expand...
Click to collapse
okay i'll try dirty flashing, thanks dude
Click to expand...
Click to collapse

LS.xD said:
Use another tool! SetCPU is buggy. You should try CM11 + kernel by @ace2nutzer. Use android's performance settings to set cpu clock and nova thor settings to set gpu clock. GPU can be stable overclocked to 680MHz
Click to expand...
Click to collapse
Yeah, but GPU OC works only over scripts..(due to the new Algorithm) there is in latest kernel a user friendly init.d script (01gpu_oc) to OC the GPU ...
Just edit and reboot... or execute the changed script with SManager wit root rights.

ace2nutzer said:
Yeah, but GPU OC works only over scripts..(due to the new Algorithm) there is in latest kernel a user friendly init.d script (01gpu_oc) to OC the GPU ...
Just edit and reboot... or execute the changed script with SManager wit root rights.
Click to expand...
Click to collapse
@ace2nutzer any idea my bbm app keeps crashing and my phone keeps rebooting, not running GPU OC, its normal have SetCPU deleted, running at 1250mhz Cpu and i cant figure out why this is happening any idea's?

milky1223 said:
@ace2nutzer any idea my bbm app keeps crashing and my phone keeps rebooting, not running GPU OC, its normal have SetCPU deleted, running at 1250mhz Cpu and i cant figure out why this is happening any idea's?
Click to expand...
Click to collapse
Try 1200 mhz.. 1250 is very high.. And wipe cache and dalvik cache in cwm. That should fix reboots

ace2nutzer said:
Try 1200 mhz.. 1250 is very high.. And wipe cache and dalvik cache in cwm. That should fix reboots
Click to expand...
Click to collapse
1250, is the highest it goes stock it goes higher but if i select a higher one it just get stuck in boot loop and will try 1200mhz for a while, should i have it 800mhz lowest - 1200mhz highest
or
1200mhz low & high?

milky1223 said:
1250, is the highest it goes stock it goes higher but if i select a higher one it just get stuck in boot loop and will try 1200mhz for a while, should i have it 800mhz lowest - 1200mhz highest
or
1200mhz low & high?
Click to expand...
Click to collapse
Wich kernel have u actually flashed?
Try latest kernel from today with 400/1200

ace2nutzer said:
Wich kernel have u actually flashed?
Try latest kernel from today with 400/1200
Click to expand...
Click to collapse
i am just falshing the new kernel right this second, and idea about the app crashes? & could i use the ART runtime with your ROM & KERNEL

milky1223 said:
i am just falshing the new kernel right this second, and idea about the app crashes? & could i use the ART runtime with your ROM & KERNEL
Click to expand...
Click to collapse
Okay... Read post #14 again.. That should also fix FC apps

ace2nutzer said:
Okay... Read post #14 again.. That should also fix FC apps
Click to expand...
Click to collapse
i have tried that a few times they still crash, and is ART able to be run with your ROM & KERNEL?

Then try 1150mhz, and then 1100mhz.. If that didn't help, try clean install .......> wipe data and format sdcard0 and 1 as vfat