Develop Bugs

CM7 OC kernel for Wildfire S A510A

i think i have just about tried every CM7 OC kernel out there but have not been able to find one specifically for my model or have i missed something.....
any ideas people?
thks

So far as I know, every CM7 rom is overclocked by default.

matt5eo said:
So far as I know, every CM7 rom is overclocked by default.
Click to expand...
Click to collapse
your correct sir but everytime i try to OC it freezes. just wondering if a seperate kernel was out there.

gentledroid17 said:
your correct sir but everytime i try to OC it freezes. just wondering if a seperate kernel was out there.
Click to expand...
Click to collapse
This is a know issues. Run the overclock with 787mhz. Some phones aren't able to run 806mhz. Hope it works for you.

any other way?

[Q] rom+kernel question!!!

hello,i have a question.
in the moment i have hboot 1.36 and the arhd18.1 rom on my onex.
now i want to try the rom from the following thread:
http://forum.xda-developers.com/showthread.php?t=1943797
but i don´t know if i can get the rom-included kernel with my hboot-version.
can someone tell me,if this is the right kernel for my hboot or if i have to get another kernel and where can i get the right kernel???
thank you for your help and sorry for my bad english(i am from germany) !!!

Sure, it'll work.
Sent from my One X

rom+kernel question!!!
i tried it with the included kernel and it doesn´t work.
i also tried a few more kernels here from the board,but on every kernel i tried i come into a bootloop.
does anyone know,if it is possible to get a jelly-bean kernel for my hboot1.36 ???
TToivanen said:
Sure, it'll work.
Sent from my One X
Click to expand...
Click to collapse

You read the OP, no? Perhaps I should've been clearer.
Floatshow said:
Note for 1.28 HBOOT users
You must use special boot.img and modules to make this ROM boot.
Use this boot.img : http://goo.gl/vv3Ln
And these modules : https://www.dropbox.com/s/phxkdxowb2yywsl/ncx_217_AOSP_modules.zip?m
Click to expand...
Click to collapse
By 1.28 he means 1.28 and higher.

[Q] cpu stick to it's high clock on custom roms

hi i'm facing an strange problem with my cpu , i've installed myonev RC9.5_FX+ on my phone with Titanium kiss latest version kernel but after 5 or 6 hour the cpu clock sticks to its high level and phone work a bit slow specially in install or uninstalling apps . i have tested the stock kernel but it was awefull and the same problem on slim bean jellybean rom .
i have tasted all of governor and even it normal values but i'm facing this issue after 5 or 6 hour again untill i restart the phone to work for 5 or 6 hour .
can anyone suggest me to make it right ?
I really don't know what is the problem .
my phone : htc one v
unlocked
s-on

fallen.69 said:
hi i'm facing an strange problem with my cpu , i've installed myonev RC9.5_FX+ on my phone with Titanium kiss latest version kernel but after 5 or 6 hour the cpu clock sticks to its high level and phone work a bit slow specially in install or uninstalling apps . i have tested the stock kernel but it was awefull and the same problem on slim bean jellybean rom .
i have tasted all of governor and even it normal values but i'm facing this issue after 5 or 6 hour again untill i restart the phone to work for 5 or 6 hour .
can anyone suggest me to make it right ?
I really don't know what is the problem .
my phone : htc one v
unlocked
s-on
Click to expand...
Click to collapse
myONEv raise CPU speed up to 1,497 MHz... you need an app to control your CPU, like SetCPU, No Frills CPU Control or Trickster Mod... then you'll be able to decrease your CPU speed

parkourz said:
myONEv raise CPU speed up to 1,497 MHz... you need an app to control your CPU, like SetCPU, No Frills CPU Control or Trickster Mod... then you'll be able to decrease your CPU speed
Click to expand...
Click to collapse
i'm using SetCPU with PimpMyRom to control my CPU after i installed the rom but it doesn't work . after 5 or 6 hour it stick to 1.497 MHz.

fallen.69 said:
i'm using SetCPU with PimpMyRom to control my CPU after i installed the rom but it doesn't work . after 5 or 6 hour it stick to 1.497 MHz.
Click to expand...
Click to collapse
If it's changing after reboot, then in SetCPU you have to check "Set on boot" option

parkourz said:
If it's changing after reboot, then in SetCPU you have to check "Set on boot" option
Click to expand...
Click to collapse
I know and I've done it already. but the result is the same .
this is a screenshot from my phone :

fallen.69 said:
I know and I've done it already. but the result is the same .
this is a screenshot from my phone :
Click to expand...
Click to collapse
You're right, that's very strange... try to reflash kernel and ROM with full wipe and post results... or try Ignorance V4, it's faster and less laggy than myONEv

parkourz said:
You're right, that's very strange... try to reflash kernel and ROM with full wipe and post results... or try Ignorance V4, it's faster and less laggy than myONEv
Click to expand...
Click to collapse
is it possible that this probles is related to the kernel or not it is related to the rom ? as i said I've tested slim bean jellybean rom and I had the same problem on it .
and is it possible that I flash the kernel without formating the rom or doing the wipe ? does it work or i need to reinstall the rom ?

fallen.69 said:
is it possible that this probles is related to the kernel or not it is related to the rom ? as i said I've tested slim bean jellybean rom and I had the same problem on it .
and is it possible that I flash the kernel without formating the rom or doing the wipe ? does it work or i need to reinstall the rom ?
Click to expand...
Click to collapse
flash SuperSU and try.

MameTozhio said:
flash SuperSU and try.
Click to expand...
Click to collapse
I'm downloading ignorance v4 right now !
this might sound silly but I forgot how to flash SuperSU can you help me with it ?

fallen.69 said:
I'm downloading ignorance v4 right now !
this might sound silly but I forgot how to flash SuperSU can you help me with it ?
Click to expand...
Click to collapse
http://download.chainfire.eu/370/SuperSU/UPDATE-SuperSU-v1.80.zip click Download UPDATE-Supersu blah blah blah etc.

MameTozhio said:
http://download.chainfire.eu/370/SuperSU/UPDATE-SuperSU-v1.80.zip click Download UPDATE-Supersu blah blah blah etc.
Click to expand...
Click to collapse
I'm already using SuperSu v1.80 , what i meant in the last post was should i reflash the superSu ? and how ? or just unistall & reinstall it ?

fallen.69 said:
I'm already using SuperSu v1.80 , what i meant in the last post was should i reflash the superSu ? and how ? or just unistall & reinstall it ?
Click to expand...
Click to collapse
Oh, I thought the problem might have been the superuser app.never mind.
Sent from my Nexus 4 using Tapatalk

parkourz said:
You're right, that's very strange... try to reflash kernel and ROM with full wipe and post results... or try Ignorance V4, it's faster and less laggy than myONEv
Click to expand...
Click to collapse
thanks to you parkourz . I've installed ignorance v4 everything work very smooth and fast and the cpu works normally . for about 2 hour i have put the phone under presser but still working normal and fast .
I think the problem was related to MyOneV rom. but if i face that strange problem again i will let you know .

fallen.69 said:
thanks to you parkourz . I've installed ignorance v4 everything work very smooth and fast and the cpu works normally . for about 2 hour i have put the phone under presser but still working normal and fast .
I think the problem was related to MyOneV rom. but if i face that strange problem again i will let you know .
Click to expand...
Click to collapse
I wonder why CPU was coming back to 1,5Ghz after reboot on myONEv...

The governor that is in use makes a huge difference in the running speed. Some will cause the phone to use the maximum speed that you set all the time
Sent from a phone that's running a ROM

Wi-Fi / Data working ROM

Hi,
I've tried several ROMS past few days and all of them had either the wi-fi or data not working.
Can someone please recomend a ROM that has these two working normally? I see no point of having a mobile without internet.
Please advise which one to try.
Thanks

raperot said:
Hi,
I've tried several ROMS past few days and all of them had either the wi-fi or data not working.
Can someone please recomend a ROM that has these two working normally? I see no point of having a mobile without internet.
Please advise which one to try.
Thanks
Click to expand...
Click to collapse
You can try shpongle or CM10. Flash proper kernel and you're good to go.

MScorporation95 said:
You can try shpongle or CM10. Flash proper kernel and you're good to go.
Click to expand...
Click to collapse
I've tried shpongle as well, and I booted the .img file that was in the zip but the phone was stuck on boot logo.
Which Kernel should I flash for shpongle and can you link me to these two working ROM's?

raperot said:
I've tried shpongle as well, and I booted the .img file that was in the zip but the phone was stuck on boot logo.
Which Kernel should I flash for shpongle and can you link me to these two working ROM's?
Click to expand...
Click to collapse
I see you are totally noob and don't want to search, just wait for help from another. Search a bit won't make you get tired, will it?
Anyway, for Shpongle, you can use HELLBOY 4.2 version or Ironman. For ROM link, you can find it by yourself.

Ringford said:
I see you are totally noob and don't want to search, just wait for help from another. Search a bit won't make you get tired, will it?
Anyway, for Shpongle, you can use HELLBOY 4.2 version or Ironman. For ROM link, you can find it by yourself.
Click to expand...
Click to collapse
Well I'm sorry but that's not the case. I've read like 50 threads at least during the past few days and searched allover the place.
I've installed few ROM's but none of them was good ( wifi/date not working) I really installed Shpongle but either I'm booting the wrong image ( cause it stuck on boot) or I'm doing something totally wrong.
That is why I asked for some help and not that I'm lazy.

raperot said:
Well I'm sorry but that's not the case. I've read like 50 threads at least during the past few days and searched allover the place.
I've installed few ROM's but none of them was good ( wifi/date not working) I really installed Shpongle but either I'm booting the wrong image ( cause it stuck on boot) or I'm doing something totally wrong.
That is why I asked for some help and not that I'm lazy.
Click to expand...
Click to collapse
Yeah, ganbatte!

Ringford said:
Yeah, ganbatte!
Click to expand...
Click to collapse
In case you are either the former or latter
http://forum.xda-developers.com/showthread.php?t=1954967

mcgi5sr2 said:
In case you are either the former or latter
http://forum.xda-developers.com/showthread.php?t=1954967
Click to expand...
Click to collapse
Hi I flahed Shpongle ROM with HELLBOY-2013-06-29-4.2 Kernel. THe wi-fi is working but mobile data I cannot connect. ITs checkmarked but doesnt work. Any ideas?
ALso I would lie to increase CPU speed to 12.ghz but in the settings there is no performance option. Need advise on this as well please.
Thanks

raperot said:
Hi I flahed Shpongle ROM with HELLBOY-2013-06-29-4.2 Kernel. THe wi-fi is working but mobile data I cannot connect. ITs checkmarked but doesnt work. Any ideas?
ALso I would lie to increase CPU speed to 12.ghz but in the settings there is no performance option. Need advise on this as well please.
Thanks
Click to expand...
Click to collapse
Have you set up your APN?
For overclocking, first go to Settings > About and tap build number 7 times then open Settings > Performance

Ringford said:
Have you set up your APN?
For overclocking, first go to Settings > About and tap build number 7 times then open Settings > Performance
Click to expand...
Click to collapse
Thank you very very much!

[Q] green vertical lines on camera view [ViperX]

Hello,
Using ViperX Rom and lyapota kernel. (this issue was also present before I flashed lyapota kernel)
Since the flash at times the camera would work fine but then when I would run it, it would display green vertical lines and taking a picture would show the same
, the front camera works fine always. And if I switch to video recording the camera app would just quit, on CameraFX same happens at times and switching to recording would give an Error could not connect to cam.
At times when I hit up camera it would display an old display like the last time I took a picture of and it would be moving forward and back (one odd frame)
Attaching screenshot for better idea.
I did flash the Rom over and again but following the correct method and everything else works fine
The search brought some fixes of green coloured images.. But that doesn't apply in my case.
great Rom otherwise.
Thanks.
P.s. I did search

This is quite a common problem. Either the camera is broken or the mainboard is.
Sent from my HTC One X using XDA Premium 4 mobile app

FaiselW said:
This is quite a common problem. Either the camera is broken or the mainboard is.
Sent from my HTC One X using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks for the feedback
But this issue wasn't there with the stock ROM before I had it flashed with viperX ...and if camera/mainboard is broken shouldn't it always not work why would it work at times ..
Let see what others have to say ..

Dr-Hack said:
Thanks for the feedback
But this issue wasn't there with the stock ROM before I had it flashed with viperX ...and if camera/mainboard is broken shouldn't it always not work why would it work at times ..
Let see what others have to say ..
Click to expand...
Click to collapse
Ok if you not sure flash ROM close to stock and see if the camera working or flash your nandroid backup

Thant said:
Ok if you not sure flash ROM close to stock and see if the camera working or flash your nandroid backup
Click to expand...
Click to collapse
But actually I am sure , the stock ROM had the camera working .. it never glitched on stock ROM. Still I should try another ?

Dr-Hack said:
But actually I am sure , the stock ROM had the camera working .. it never glitched on stock ROM. Still I should try another ?
Click to expand...
Click to collapse
yes try another rom close to stock to be sure it is hardware or ROM problem

Thant said:
yes try another rom close to stock to be sure it is hardware or ROM problem
Click to expand...
Click to collapse
Flashed MaximusHD 21.2.0 - same glitch . .out of three tries cam worked all fine just once ..
Should i give AOSP based Rom a try ?

Dr-Hack said:
Flashed MaximusHD 21.2.0 - same glitch . .out of three tries cam worked all fine just once ..
Should i give AOSP based Rom a try ?
Click to expand...
Click to collapse
MaximusHd is with stock kernel it is hardware problem but if you want try AOSP

Thant said:
MaximusHd is with stock kernel it is hardware problem but if you want try AOSP
Click to expand...
Click to collapse
i am only flashing the ROM , not the Kernel using lyapota kernel which i did few days prior ..will do one more sense rom then go with AOSP also mix match this with a Stock Kernel before heading for Repairs
thanks for the info and help ..i wonder why i couldnt find this issue on the forum before

Dr-Hack said:
i am only flashing the ROM , not the Kernel using lyapota kernel which i did few days prior ..will do one more sense rom then go with AOSP also mix match this with a Stock Kernel before heading for Repairs
thanks for the info and help ..i wonder why i couldnt find this issue on the forum before
Click to expand...
Click to collapse
good luck:good:

partial fixed
I have found a way to know how to use it .. i dont know why thing worked but it seems to work now ..
1. I have used UV -10
2. Dont use the Stock Camera App
3. if the camera is running and the screen times out it will again get stuck so dont let that happen
4. when i open the camera i keep it vertical ..
all of this pretty much makes no sense .but I am able to use the Camera without the Glitch and old stucked Image issue

Dr-Hack said:
I have found a way to know how to use it .. i dont know why thing worked but it seems to work now ..
1. I have used UV -10
Click to expand...
Click to collapse
UV -10?
Can you tell what is that?

perce_ption said:
UV -10?
Can you tell what is that?
Click to expand...
Click to collapse
UnderVolting , its done by various Apps/Roms and Kernels

Dr-Hack said:
UnderVolting , its done by various Apps/Roms and Kernels
Click to expand...
Click to collapse
Thankyou.
I ve a similar issue.
Is there an under volting option is team venom viperx?

Deleted.......

perce_ption said:
Thankyou.
I ve a similar issue.
Is there an under volting option is team venom viperx?
Click to expand...
Click to collapse
Yes, Venom Tweaks >> CPU tab
Moreover I am using lyapota kernel it has uv options

Dr-Hack said:
Yes, Venom Tweaks >> CPU tab
Moreover I am using lyapota kernel it has uv options
Click to expand...
Click to collapse
Men, i flash venom rom and lyaopota uv kernel, but still the same problem.
Im doing right???
Thanks Dr.!

rodriciru said:
Men, i flash venom rom and lyaopota uv kernel, but still the same problem.
Im doing right???
Thanks Dr.!
Click to expand...
Click to collapse
i have moved on to HTC M8 and in my particular phone the issue was a hardware one .. IC issue was causing it .. maybe you should also get it checked ?

Dr-Hack said:
i have moved on to HTC M8 and in my particular phone the issue was a hardware one .. IC issue was causing it .. maybe you should also get it checked ?
Click to expand...
Click to collapse
Thanks for your answer!
But what IC, Camera IC or other??
If is camera ic where is located?
thanks Dr. hack!

rodriciru said:
Thanks for your answer!
But what IC, Camera IC or other??
If is camera ic where is located?
thanks Dr. hack!
Click to expand...
Click to collapse
its located on the main board just beside the camera... but when you will take it for repairs the guy will understand .. also note does your phone get heat up near the camera when you keep the camera running / ?