Develop Bugs

[Q] Overclock Galaxy Y (2.3.6 Gingerbeard) (Rooted)

Hello everyone I rooted my phone but I also want to OC it but I must be sure it will not brick my phone etc...
The link I found is this: freshnewsarea.com/tricks/overclock-samsung-galaxy-y-to-900-mhz/
Is this safe to do and is it compatible with 2.3.6 Gingerbread ?
Thanks In advance (sorry for the stupid questions but I don't want to brick my phone as my Dad would be very mad at me)

look here:
http://forum.xda-developers.com/showthread.php?t=1550065
post number #3 at this moment im using this kernel V0.7.50 RC 20
and app for ovc use NO FRILLS CPU

thanks for replying but I see that custom kernel is still in beta stage so it can be buggy isn't it ?

Yes it can be. But there are a lot of users out there with the kernel. Just follow the instructions and flash it using one of the many methods. You can only OC it to 900 MHz though. 1 Gz is too buggy.

High00 said:
look here:
http://forum.xda-developers.com/showthread.php?t=1550065
post number #3 at this moment im using this kernel V0.7.50 RC 20
and app for ovc use NO FRILLS CPU
Click to expand...
Click to collapse
I tried this kernel but the oc is not working.. its only display 900mhz but when I try to use antutu, 500mhz hot the highest svore
Sent from my GT-S5360 using xda premium

Nervermind

High00 said:
look here:
http://forum.xda-developers.com/showthread.php?t=1550065
post number #3 at this moment im using this kernel V0.7.50 RC 20
and app for ovc use NO FRILLS CPU
Click to expand...
Click to collapse
Thats where this thread should have been closed!

[QUESTION] About Creed's Rom v2

Hello guys I just want to ask what is the baseband of Creed's Rom v2 I want to install this rom but running latest Rom DXLE1 for my SGY anyone? please?

DDLC2

hitme987 said:
DDLC2
Click to expand...
Click to collapse
Thanks dude. Can i ask something? Merruk Kernel compatible with Creed's Rom v2? and if a2sd Compatible with it? Just want to know!

kevinzareno said:
Hello guys I just want to ask what is the baseband of Creed's Rom v2 I want to install this rom but running latest Rom DXLE1 for my SGY anyone? please?
Click to expand...
Click to collapse
it's based on DXKL2
it's ok to install it over stock rom DXLE1
your baseband will be the same= DXLE1 but your
pda and csc will downgrade to DXKL2

Oops my bad Leo is right I just checked it.

kevinzareno said:
Thanks dude. Can i ask something? Merruk Kernel compatible with Creed's Rom v2? and if a2sd Compatible with it? Just want to know!
Click to expand...
Click to collapse
yes, it is compatible to merruk pre 2.0 kernel
just don't use the ext4.zip

kevinzareno said:
Thanks dude. Can i ask something? Merruk Kernel compatible with Creed's Rom v2? and if a2sd Compatible with it? Just want to know!
Click to expand...
Click to collapse
Both a2sd and merruk kernel is compatible. You need to the a2sd darktremor.zip for the a2sd to work though.

hitme987 said:
Oops my bad Leo is right I just checked it.
Click to expand...
Click to collapse
off topic:
bro, what gov do you use?? that's uses all freqs..
performance:battery
ratio 60:40
any suggestions?? :highfive:

leodasal2 said:
off topic:
bro, what gov do you use?? that's uses all freqs..
performance:battery
ratio 60:40
any suggestions?? :highfive:
Click to expand...
Click to collapse
Offtopic:
Smartass v2 uses 2-3 frequencies and decreases/increases freq as per the load. It is the best performance with max power saving gov. It has quite good results in benchmarks in xda. Ondemand and interactivex are some others. Refer these threads, they are quite informative: (first ones enough)
http://forum.xda-developers.com/showthread.php?t=1555744
http://forum.xda-developers.com/showthread.php?t=1369817
A quote from the 1st thread.
Code:
#3 - The most power saving governor is Ondemand. If you need a high performance governor, use smartassV2, which offers some battery savings.

hitme987 said:
Offtopic:
Smartass v2 uses 2-3 frequencies and decreases/increases freq as per the load. It is the best performance with max power saving gov. It has quite good results in benchmarks in xda. Ondemand and interactivex are some others. Refer these threads, they are quite informative: (first ones enough)
http://forum.xda-developers.com/showthread.php?t=1555744
http://forum.xda-developers.com/showthread.php?t=1369817
A quote from the 1st thread.
Code:
#3 - The most power saving governor is Ondemand. If you need a high performance governor, use smartassV2, which offers some battery savings.
Click to expand...
Click to collapse
i'm using smartassV2..
thanks for the confirmation :good:

[Q] A simple overclocking question

Hi all
I have recently rooted my phone and have installed advanced stock kernel. Now i was thinking of to overclock my device but after wandering over countless threads gave up. I want to overclock my phone to 1.7 ghz, have have tried KA Xperia SSpeed kernel v7 but after installing the 1.7ghz kernel my device went into a bootloop and would boot after approx 30 sec after the lockscreen appeared. Next i went over to Doom kernel but realized it was only for gingerbread (i am currently running ics .45 firmware) plus i could download the files anyway due to some network error. I could find anything else regarding overclocking, so here i humbly ask again, is there any way to overclock my device to 1.7 ghz stable? Plus there wouldn't be any risk of OC'ing to 1.7 ghz as xperia sl has the same hardware and is factory OC'ed, would there? Any Help?
Thanx in advance

anyone?

If overclocking causes bootloop then your phone can probably not take the higher frequency. Not all can.
Also get this flashed newest software - http://forum.xda-developers.com/showthread.php?p=34244504
Sent from my Jellybean Xperia S

Ben36 said:
If overclocking causes bootloop then your phone can probably not take the higher frequency. Not all can.
Also get this flashed newest software - http://forum.xda-developers.com/showthread.php?p=34244504
Sent from my Jellybean Xperia S
Click to expand...
Click to collapse
how come? xperia sl has the same chip but it is stable while mine is not?
PS Jelly Bean!!!??? HOW?

Ur bootloader is unlocked?
And btw, every phone is different. Some take 2 ghz without a problem, others get bootloop at 1,6 ghz. Also, overclocking isnt that good. its better to use a fast gouvernor and sheduler.
U can get jelly bean with a custom rom.

w3nZ said:
Ur bootloader is unlocked?
And btw, every phone is different. Some take 2 ghz without a problem, others get bootloop at 1,6 ghz. Also, overclocking isnt that good. its better to use a fast gouvernor and sheduler.
U can get jelly bean with a custom rom.
Click to expand...
Click to collapse
A Jenny Bean?Wow
Sent from my LT28h using xda premium

my mistake, i know^^

w3nZ said:
Ur bootloader is unlocked?
And btw, every phone is different. Some take 2 ghz without a problem, others get bootloop at 1,6 ghz. Also, overclocking isnt that good. its better to use a fast gouvernor and sheduler.
U can get jelly bean with a custom rom.
Click to expand...
Click to collapse
yes my bootloader is unlocked... btw what do you mean by fast governor and scheduler?

Depends on ur rom, on ICS smartassv2 + noop is good, on Jelly Bean interactive(X) + sio.
Why do u want to overclock?

w3nZ said:
Depends on ur rom, on ICS smartassv2 + noop is good, on Jelly Bean interactive(X) + sio.
Why do u want to overclock?
Click to expand...
Click to collapse
because my device gets laggy with a live wallpaper and also because i thought whats the harm? when sl can do it perfectly so could mine
i am on a stock rom, so can you please tell me more about those governors? i am new to this stuff

If you're unlocked then flash advanced stock kernel and then flash paranoid android 2.55, it's sooo fast!
Sent from my Xperia S using Tapatalk 2

Try using a cpu app like 'cpu master'. Use settings to find an overclock frequency that's stable. You don't have to use the full overclock frequency.
~Jaramie
sent by my ION

Ben36 said:
If you're unlocked then flash advanced stock kernel and then flash paranoid android 2.55, it's sooo fast!
Sent from my Xperia S using Tapatalk 2
Click to expand...
Click to collapse
so on that do all the features work? like hdmi, hardware acceleration etc?
btw i already have advanced stock kernel
ToledoJab said:
Try using a cpu app like 'cpu master'. Use settings to find an overclock frequency that's stable. You don't have to use the full overclock frequency.
~Jaramie
sent by my ION
Click to expand...
Click to collapse
you dont understand i cannot overclock using any app. My current frequency is shown as the max frequency

u cant oc with the stock kernel

interesting development... i installed xsx krnel 1.9 ghz doesnt go to bootloop like it did with SSpeed kernel 1.7 ghz
any ideas?

ah forget it, i am better off with 1.5ghz

SalmanAbbas said:
interesting development... i installed xsx krnel 1.9 ghz doesnt go to bootloop like it did with SSpeed kernel 1.7 ghz
any ideas?
Click to expand...
Click to collapse
1.9-1.7 are the max frequencys, yes. But you use an app to lower the frequency until the phone is stable. My x10 had a 1228mhz max kernel, but my phone would only be stable at 1190mhz. Some x10 would only run at stock, no overclock.
~Jaramie
sent by my ION

SalmanAbbas said:
so on that do all the features work? like hdmi, hardware acceleration etc?
btw i already have advanced stock kernel
you dont understand i cannot overclock using any app. My current frequency is shown as the max frequency
Click to expand...
Click to collapse
I've not found many bugs. Definitely not any worth worrying about!
Sent from my Jellybean Xperia S

[Q] cpu stick to it's high clock on custom roms

hi i'm facing an strange problem with my cpu , i've installed myonev RC9.5_FX+ on my phone with Titanium kiss latest version kernel but after 5 or 6 hour the cpu clock sticks to its high level and phone work a bit slow specially in install or uninstalling apps . i have tested the stock kernel but it was awefull and the same problem on slim bean jellybean rom .
i have tasted all of governor and even it normal values but i'm facing this issue after 5 or 6 hour again untill i restart the phone to work for 5 or 6 hour .
can anyone suggest me to make it right ?
I really don't know what is the problem .
my phone : htc one v
unlocked
s-on

fallen.69 said:
hi i'm facing an strange problem with my cpu , i've installed myonev RC9.5_FX+ on my phone with Titanium kiss latest version kernel but after 5 or 6 hour the cpu clock sticks to its high level and phone work a bit slow specially in install or uninstalling apps . i have tested the stock kernel but it was awefull and the same problem on slim bean jellybean rom .
i have tasted all of governor and even it normal values but i'm facing this issue after 5 or 6 hour again untill i restart the phone to work for 5 or 6 hour .
can anyone suggest me to make it right ?
I really don't know what is the problem .
my phone : htc one v
unlocked
s-on
Click to expand...
Click to collapse
myONEv raise CPU speed up to 1,497 MHz... you need an app to control your CPU, like SetCPU, No Frills CPU Control or Trickster Mod... then you'll be able to decrease your CPU speed

parkourz said:
myONEv raise CPU speed up to 1,497 MHz... you need an app to control your CPU, like SetCPU, No Frills CPU Control or Trickster Mod... then you'll be able to decrease your CPU speed
Click to expand...
Click to collapse
i'm using SetCPU with PimpMyRom to control my CPU after i installed the rom but it doesn't work . after 5 or 6 hour it stick to 1.497 MHz.

fallen.69 said:
i'm using SetCPU with PimpMyRom to control my CPU after i installed the rom but it doesn't work . after 5 or 6 hour it stick to 1.497 MHz.
Click to expand...
Click to collapse
If it's changing after reboot, then in SetCPU you have to check "Set on boot" option

parkourz said:
If it's changing after reboot, then in SetCPU you have to check "Set on boot" option
Click to expand...
Click to collapse
I know and I've done it already. but the result is the same .
this is a screenshot from my phone :

fallen.69 said:
I know and I've done it already. but the result is the same .
this is a screenshot from my phone :
Click to expand...
Click to collapse
You're right, that's very strange... try to reflash kernel and ROM with full wipe and post results... or try Ignorance V4, it's faster and less laggy than myONEv

parkourz said:
You're right, that's very strange... try to reflash kernel and ROM with full wipe and post results... or try Ignorance V4, it's faster and less laggy than myONEv
Click to expand...
Click to collapse
is it possible that this probles is related to the kernel or not it is related to the rom ? as i said I've tested slim bean jellybean rom and I had the same problem on it .
and is it possible that I flash the kernel without formating the rom or doing the wipe ? does it work or i need to reinstall the rom ?

fallen.69 said:
is it possible that this probles is related to the kernel or not it is related to the rom ? as i said I've tested slim bean jellybean rom and I had the same problem on it .
and is it possible that I flash the kernel without formating the rom or doing the wipe ? does it work or i need to reinstall the rom ?
Click to expand...
Click to collapse
flash SuperSU and try.

MameTozhio said:
flash SuperSU and try.
Click to expand...
Click to collapse
I'm downloading ignorance v4 right now !
this might sound silly but I forgot how to flash SuperSU can you help me with it ?

fallen.69 said:
I'm downloading ignorance v4 right now !
this might sound silly but I forgot how to flash SuperSU can you help me with it ?
Click to expand...
Click to collapse
http://download.chainfire.eu/370/SuperSU/UPDATE-SuperSU-v1.80.zip click Download UPDATE-Supersu blah blah blah etc.

MameTozhio said:
http://download.chainfire.eu/370/SuperSU/UPDATE-SuperSU-v1.80.zip click Download UPDATE-Supersu blah blah blah etc.
Click to expand...
Click to collapse
I'm already using SuperSu v1.80 , what i meant in the last post was should i reflash the superSu ? and how ? or just unistall & reinstall it ?

fallen.69 said:
I'm already using SuperSu v1.80 , what i meant in the last post was should i reflash the superSu ? and how ? or just unistall & reinstall it ?
Click to expand...
Click to collapse
Oh, I thought the problem might have been the superuser app.never mind.
Sent from my Nexus 4 using Tapatalk

parkourz said:
You're right, that's very strange... try to reflash kernel and ROM with full wipe and post results... or try Ignorance V4, it's faster and less laggy than myONEv
Click to expand...
Click to collapse
thanks to you parkourz . I've installed ignorance v4 everything work very smooth and fast and the cpu works normally . for about 2 hour i have put the phone under presser but still working normal and fast .
I think the problem was related to MyOneV rom. but if i face that strange problem again i will let you know .

fallen.69 said:
thanks to you parkourz . I've installed ignorance v4 everything work very smooth and fast and the cpu works normally . for about 2 hour i have put the phone under presser but still working normal and fast .
I think the problem was related to MyOneV rom. but if i face that strange problem again i will let you know .
Click to expand...
Click to collapse
I wonder why CPU was coming back to 1,5Ghz after reboot on myONEv...

The governor that is in use makes a huge difference in the running speed. Some will cause the phone to use the maximum speed that you set all the time
Sent from a phone that's running a ROM

[HELP] does anybody know why setcpu keeps changing my cpu freqenzie

i normally have SetCPU on 1250 with performance and sioplus
BUT SetCPU keeps changing it back to 800 and i have to keep
changing it back 1250
im using this ROM; http://forum.xda-developers.com/showthread.php?t=2555021
i HAVE NOT changed the kernel using the one supplied with the ROM
ROOTED phone obviously
SetCPU changing freqenzies is becoming annoying as i play alot of games and when it changes it lags my games
any idea's on how to fix it? :fingers-crossed:

milky1223 said:
i normally have SetCPU on 1250 with performance and sioplus
BUT SetCPU keeps changing it back to 800 and i have to keep
changing it back 1250
im using this ROM; http://forum.xda-developers.com/showthread.php?t=2555021
i HAVE NOT changed the kernel using the one supplied with the ROM
ROOTED phone obviously
SetCPU changing freqenzies is becoming annoying as i play alot of games and when it changes it lags my games
any idea's on how to fix it? :fingers-crossed:
Click to expand...
Click to collapse
Use another tool! SetCPU is buggy. You should try CM11 + kernel by @ace2nutzer. Use android's performance settings to set cpu clock and nova thor settings to set gpu clock. GPU can be stable overclocked to 680MHz

LS.xD said:
Use another tool! SetCPU is buggy. You should try CM11 + kernel by @ace2nutzer. Use android's performance settings to set cpu clock and nova thor settings to set gpu clock. GPU can be stable overclocked to 680MHz
Click to expand...
Click to collapse
can you give me a link? and is the same cm11 or different?

milky1223 said:
can you give me a link? and is the same cm11 or different?
Click to expand...
Click to collapse
optimized by ace2nutzer --> THREAD --> rom and kernel can be found on the FTP server

LS.xD said:
optimized by ace2nutzer --> THREAD --> rom and kernel can be found on the FTP server
Click to expand...
Click to collapse
where do i actually download it witch files got confused about this earlier, when i was looking at it couldnt find the right file to download for both

milky1223 said:
where do i actually download it witch files got confused about this earlier, when i was looking at it couldnt find the right file to download for both
Click to expand...
Click to collapse
is your phone 8160 or 8160P (P variant has NFC) ?

LS.xD said:
is your phone 8160 or 8160P (P variant has NFC) ?
Click to expand...
Click to collapse
8160 version never nknew there was P a version whats the difference?

milky1223 said:
8160 version never nknew there was P a version whats the difference?
Click to expand...
Click to collapse
P has NFC as I said,
ROM + KERNEL

LS.xD said:
P has NFC as I said,
cheers and do i need to clear both cache's and reset all data before installing and witch order i install them?
rom + kernel 0r other way?
Click to expand...
Click to collapse

milky1223 said:
LS.xD said:
P has NFC as I said,
cheers and do i need to clear both cache's and reset all data before installing and witch order i install them?
rom + kernel 0r other way?
Click to expand...
Click to collapse
full wipe is recommended. But you can try to dirty flash it by only wipe caches before flashing. First flash the rom, then flash the kernel.
Click to expand...
Click to collapse

LS.xD said:
milky1223 said:
full wipe is recommended. But you can try to dirty flash it by only wipe caches before flashing. First flash the rom, then flash the kernel.
Click to expand...
Click to collapse
okay i'll try dirty flashing, thanks dude
Click to expand...
Click to collapse

LS.xD said:
Use another tool! SetCPU is buggy. You should try CM11 + kernel by @ace2nutzer. Use android's performance settings to set cpu clock and nova thor settings to set gpu clock. GPU can be stable overclocked to 680MHz
Click to expand...
Click to collapse
Yeah, but GPU OC works only over scripts..(due to the new Algorithm) there is in latest kernel a user friendly init.d script (01gpu_oc) to OC the GPU ...
Just edit and reboot... or execute the changed script with SManager wit root rights.

ace2nutzer said:
Yeah, but GPU OC works only over scripts..(due to the new Algorithm) there is in latest kernel a user friendly init.d script (01gpu_oc) to OC the GPU ...
Just edit and reboot... or execute the changed script with SManager wit root rights.
Click to expand...
Click to collapse
@ace2nutzer any idea my bbm app keeps crashing and my phone keeps rebooting, not running GPU OC, its normal have SetCPU deleted, running at 1250mhz Cpu and i cant figure out why this is happening any idea's?

milky1223 said:
@ace2nutzer any idea my bbm app keeps crashing and my phone keeps rebooting, not running GPU OC, its normal have SetCPU deleted, running at 1250mhz Cpu and i cant figure out why this is happening any idea's?
Click to expand...
Click to collapse
Try 1200 mhz.. 1250 is very high.. And wipe cache and dalvik cache in cwm. That should fix reboots

ace2nutzer said:
Try 1200 mhz.. 1250 is very high.. And wipe cache and dalvik cache in cwm. That should fix reboots
Click to expand...
Click to collapse
1250, is the highest it goes stock it goes higher but if i select a higher one it just get stuck in boot loop and will try 1200mhz for a while, should i have it 800mhz lowest - 1200mhz highest
or
1200mhz low & high?

milky1223 said:
1250, is the highest it goes stock it goes higher but if i select a higher one it just get stuck in boot loop and will try 1200mhz for a while, should i have it 800mhz lowest - 1200mhz highest
or
1200mhz low & high?
Click to expand...
Click to collapse
Wich kernel have u actually flashed?
Try latest kernel from today with 400/1200

ace2nutzer said:
Wich kernel have u actually flashed?
Try latest kernel from today with 400/1200
Click to expand...
Click to collapse
i am just falshing the new kernel right this second, and idea about the app crashes? & could i use the ART runtime with your ROM & KERNEL

milky1223 said:
i am just falshing the new kernel right this second, and idea about the app crashes? & could i use the ART runtime with your ROM & KERNEL
Click to expand...
Click to collapse
Okay... Read post #14 again.. That should also fix FC apps

ace2nutzer said:
Okay... Read post #14 again.. That should also fix FC apps
Click to expand...
Click to collapse
i have tried that a few times they still crash, and is ART able to be run with your ROM & KERNEL?

Then try 1150mhz, and then 1100mhz.. If that didn't help, try clean install .......> wipe data and format sdcard0 and 1 as vfat