Q&A for [TUTORIAL] Unbrick xolo Q1010i
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [TUTORIAL] Unbrick xolo Q1010i. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Phone not detected
Firstly, having issue with the driver auto installer. When I double-click install.bat, do not support win NT earlier version appears in the cmd prompt.
Secondly, my pc is not able to detect my phone.
Is there any way to unbrick a hard bricked q1010i? Please suggest ASAP.
Phone Hard bricked by CHAINFIRE
I got an 89MB OTA update for Xolo Q1010i. I didn't remember that I had previously installed Chainfire App.
My phone got bricked and started bootlooping getting stuck at XOLO logo. Even though I installed working drivers for windows my phone gets switched on and starts bootlooping once I connect it to PC. The device disappears within seconds from Device manager before I could take any action from SP Tools.
I also tried sideloading using adb and it returns installation aborted after sideloading Stock ROM. Also I am not able to go into adb shell as it returns error:closed. I have only stock recovery installed.
Please help. I can PAYPAL anyone who gives working solution
i would suggest to charge your phone for about 2-4 hrs and then try switching it on....
if xolo logo displays or anything on the screen...
go for a clean pc with not a single mobile driver installed (or uninstall every single one of em whichever suits you).
install the necessary drivers and then try flashing the stock rom jb/kk (your choice).
if your phone doesn't switch on or no display change...then if your phone is under warranty..play dumb and give to service center else...try it after some day...that's all i can help.
nishantgupta107 said:
i would suggest to charge your phone for about 2-4 hrs and then try switching it on....
if xolo logo displays or anything on the screen...
go for a clean pc with not a single mobile driver installed (or uninstall every single one of em whichever suits you).
install the necessary drivers and then try flashing the stock rom jb/kk (your choice).
if your phone doesn't switch on or no display change...then if your phone is under warranty..play dumb and give to service center else...try it after some day...that's all i can help.
Click to expand...
Click to collapse
No it is not under warranty.. I will try doing your method. But I dont understand what difference it makes.
worked for me...thought might work for you too.
clicking on isntall.bat it is showing do not support win NT earlier system please help. I'm currently using windows 8.1
---------- Post added at 10:38 AM ---------- Previous post was at 10:26 AM ----------
clicking on isntall.bat it is showing do not support win NT earlier system please help. I'm currently using windows 8.1
Phone inst even recognizing device i have all driver installed
How can flash stock rom via twrp?
Any flashble stock zip here-??
Sent from my SM-G920F using Tapatalk
Related
Hey guys,
I am facing this prob. for quite some time. Whenever I use flashtool and connect my Xperia Arc in flash mode, the computer hangs without any warning and I jus have to restart it. FlashTool says that drivers for the device is not correctly installed.
Pl. help me with regard to this.
I am presently running CyanogenMod 9 Nightly version.
Flashtool: 0.9.8.0
Awaiting your reply
Epic Fail, Wrong Forum............................................................................................................Reportet.
reinstall driver , format your computer ??
And please note that here Development Forum
pls post it to right place -____-
Don't be so mean. Have you ever got into despair when having a problem? Have you though that the forum name is not the most relevant one? By the way, where should a question like this be posted?!
TO answer the question... it is not easy so solve. You will need to clean your PC of all possible traces of old drivers. To do that, with the phone disconnected, go to Device Manager on PC (google if you don't know how). Then, remove any possible references to your phone using the information from here: http://technet.microsoft.com/en-us/magazine/ff184583.aspx
After that, install Sony PC Sync software. Follow the steps. At the end, it should tell you that you should connect phone.
Everything should work now (your phone will be finally re-discovered).
Before you do that, also try to disable Debugging on the phone and set the PC connection to MTP.
Good Luck!
okty2k said:
By the way, where should a question like this be posted?!
Click to expand...
Click to collapse
Preferably on the flashtool thread, failing that the Q&A section, after trying to solve the issue instead of creating a new thread/post after the first failed attempt at something.
Sent from my CM9'd Ray
Try reinstalling drivers from flash tool/drivers
amulbaby said:
Hey guys,
I am facing this prob. for quite some time. Whenever I use flashtool and connect my Xperia Arc in flash mode, the computer hangs without any warning and I jus have to restart it. FlashTool says that drivers for the device is not correctly installed.
Pl. help me with regard to this.
I am presently running CyanogenMod 9 Nightly version.
Flashtool: 0.9.8.0
Awaiting your reply
Click to expand...
Click to collapse
first, you start with fresh windows install, after install flash tools
rod555 said:
first, you start with fresh windows install
Click to expand...
Click to collapse
Bit extreme unless all else fails.
or you try with one Virtual machine... Vmware
I recently rooted my Micromax Canvas 4. After its rooted, it was working flawlessly. further i installed Chaifire 3d. After intalling CF3D drivers from the app, it tried to reboot, but is wnfortunately freezing at canvas 4 logo screen. I need an urgent help.
Is this an Brick case im facing?
How can i Save phone?
Will installing a ROM help?
flash stock rom using flash tool
Ronald Stefinson said:
I recently rooted my Micromax Canvas 4. After its rooted, it was working flawlessly. further i installed Chaifire 3d. After intalling CF3D drivers from the app, it tried to reboot, but is wnfortunately freezing at canvas 4 logo screen. I need an urgent help.
Is this an Brick case im facing?
How can i Save phone?
Will installing a ROM help?
Click to expand...
Click to collapse
use sp tool and flash coustom rom
raj1988 said:
use sp tool and flash coustom rom
Click to expand...
Click to collapse
Thanksfor taking time to respond.
The problem is im a little less able to be called a developer. I tried searching it but didnt got an original Rom, the one micromax uses. It would be very helpfull if u post a link. I'll manage to download sp flash tools on my own.
you get it from below link
Ronald Stefinson said:
Thanksfor taking time to respond.
The problem is im.
http://forum.xda-developers.com/canvas-4/general/micromax-canvas-4-a210-t2453846
go to this link an there you find blog link which have sp flash tool link
original stock rom
and how to flash it
good luck bro
Click to expand...
Click to collapse
raj1988 said:
Ronald Stefinson said:
Thanksfor taking time to respond.
The problem is im.
http://forum.xda-developers.com/canvas-4/general/micromax-canvas-4-a210-t2453846
go to this link an there you find blog link which have sp flash tool link
original stock rom
and how to flash it
good luck bro
Click to expand...
Click to collapse
downloaded the ROM and im Stuck where usb is not detected. i tried installing different drivers like pdanet, cynus t1 drivers. what should i do? its still searching.
Click to expand...
Click to collapse
try follows option
first you have done little research about the app
if you have cwm try to go to recovery and factory reset device and wipe data
but may be you didn't install than try this you say that canvas 4 logo seen hence may be you are able to get into recovey
press and hold vol up down and power keynow u see recovery mode and factory mode
press vol up key for go to recovery mode now see like this
use only vol up for scrolling and go to recovery mode then press vol downnow u see wipe reset menu hare
go to wipe/reset with vol key's5.to select use options keynow reset finish...............
try it and work for you than tell me
Ronald Stefinson said:
I recently rooted my Micromax Canvas 4. After its rooted, it was working flawlessly. further i installed Chaifire 3d. After intalling CF3D drivers from the app, it tried to reboot, but is wnfortunately freezing at canvas 4 logo screen. I need an urgent help.
Is this an Brick case im facing?
How can i Save phone?
Will installing a ROM help?
Click to expand...
Click to collapse
Open your device manager on your pc then plug the phone via USB. After a second or two I new device will pop up on the device manager but will only stay there for a few seconds, right when it appears right click on it and choose properties then drivers, then update driver then (at least on Windows 7) choose browse my computer and use wherever you put the driver files. That will install the driver.
Once the drivers are installed unplug the phone and open the Flash tool on the pc. Click scatter loading. And direct it to the Scatter file of the Rom. Then click download. now plug the phone back in and it should just flash it. When you get the green circle it's done.
---------- Post added at 01:09 PM ---------- Previous post was at 01:04 PM ----------
And no, it's not bricked. Mine did the same thing trying to use Chainfire 3D. If you follow the directions it will work. Oh yeah, the first time you turn it on it may not boot. Just hold the power button and restart again and once the boot screens come up you will see the android is updating apps and it will boot.
help I need help
hi everybody
things are going from bad to worst but i am not giving up.....so need U
as per your post even can can unbrick canvas4 ....
while using sp too; i used format ( to factory format)
now nothing happens ( pressing down Vol +/_ and power ) cant go into recovery
please help.....
will be great full ( have canvas 4 stock rom downloaded)........?
Great news
Hi guys and thanks to all those who advised me
There is good news for those who have hard bricked phone ( ie the phone don't even have a boot loader, cant start , nor recognized by PC, or go into recovery.... no red light when connected to charger) , i formated via sptool the bootloader and the phone was totally dead....
most said it not possible to revive it .....its in dead zone..... go to service center and change processor.
the new is for all local micromax , karbonn, spice (chinese brand) phone its simple and cost the least and the service is available for just Rs350/- ( $6/-), that to in under 10mins......
jtag service for just Rs1500/- to 2000/- ( $25 to 30/-) for branded phones
if anyone has problems ( bricking) specially in Goa please do post will direct you to the local guy center..
LESSON LEARNT>>>>>>>>>NEVER GIVE UP
CANVA 4 A210 / BLUE oNE
Hey m also facing a similar problem anyone plz help us. My phone is Micromax Canvas 3D. I had installed a custom rom it was working fine but suddenly I thought to factory reset it.......then oh no just the boot logo comes and the phone doesn't starts. I know its not bootloop. It is not even connecting to computer nor the recovery mode is opening... PLZ help if anyone can........
Shikhar122 said:
Hey m also facing a similar problem anyone plz help us. My phone is Micromax Canvas 3D. I had installed a custom rom it was working fine but suddenly I thought to factory reset it.......then oh no just the boot logo comes and the phone doesn't starts. I know its not bootloop. It is not even connecting to computer nor the recovery mode is opening... PLZ help if anyone can........
Click to expand...
Click to collapse
why not just flash the stock ROM using Sp flash tool
---------- Post added at 05:41 PM ---------- Previous post was at 05:34 PM ----------
Ronald Stefinson said:
raj1988 said:
downloaded the ROM and im Stuck where usb is not detected. i tried installing different drivers like pdanet, cynus t1 drivers. what should i do? its still searching.
Click to expand...
Click to collapse
manually install MTK65xx VCOM driver. see the video tutorial below for a guide
Click to expand...
Click to collapse
boot loop and no recovery Canvas a310 nitro (no forum for nitro)
I have rooted my Micromax Canvas Nitro A310 using Kingoroot and installed TWRP recovery before. Also I had installed a Custom ROM of Coolpad F1 from needrom<dot>com. There wasnt any problem till now except the auto rotation. Today i formated my sd card and switched off my phone and on reboot it came to boot loop. It is not booting the ROM and also the TWRP recovery. Shows only the first screen and goes off and on to the screen again. As it does not boot to recovery for me to wipe cache and dalvik, I tried to install drivers again to flash recovery using fastboot, but as its on a boot loop problem and its not standing by for me to install drivers, I am totally stuck. Please help me ASAP.
Sorry for the bad English.
Thank you
jjwaiting4u said:
Hi guys and thanks to all those who advised me
There is good news for those who have hard bricked phone ( ie the phone don't even have a boot loader, cant start , nor recognized by PC, or go into recovery.... no red light when connected to charger) , i formated via sptool the bootloader and the phone was totally dead....
most said it not possible to revive it .....its in dead zone..... go to service center and change processor.
the new is for all local micromax , karbonn, spice (chinese brand) phone its simple and cost the least and the service is available for just Rs350/- ( $6/-), that to in under 10mins......
jtag service for just Rs1500/- to 2000/- ( $25 to 30/-) for branded phones
if anyone has problems ( bricking) specially in Goa please do post will direct you to the local guy center..
LESSON LEARNT>>>>>>>>>NEVER GIVE UP
CANVA 4 A210 / BLUE oNE
Click to expand...
Click to collapse
I need a jtag centre to unbrick my Moto e. My location patna
My note 2 has USB Bricked, Recovery corrupted (cant access recovery mod), when try to turn on stuck at downloading,
But I can access Download mod via pressing down+home+power.
and Pc cant recognize my device...
any help... plz...
tried in different pc and laptops, using dozens of usb cable still Pc cant recognize my device.
(I heard that HTC has solution for usb brick is there anything for Samsung)
....Its more than one months .... and no reply.... plz any help...
Guys c'mon .... i'm loosing hope.
Either your USB socket is faulty (In whch case you will need to obviously replace it)
Or you dont have correct driver installed. If you dont have Kies installed install it and then close it down and use ODIN. If you already have it installed uninstall and and then reinstall. Once you have connection install a stock rom. I would recomend an older Jellybean or ICS based rom so that it doesnt install KNOX. Then after this and you can install CWM or TWRP etc and flash away.
Also make sure you're using correct ODIN version.
By the way, one of the reason's nobody has replied to you is likely that you haven't bothered to create a proper title so they just ignored you. Titles are there for a reason and that is to give a brief description of topic, not to plea. They need to be descriptive so that people browsing forum know what forum topic is about at a glance rather then it just been a generic n00by "plz help phone is borked" type of reply.
Hi.
Sincere apologies if I'm posting in the wrong place. (I counnld't ask it in the relevant thread since I am a new member and don't have ten posts already (forum rules)
I'm desperate.
I have Huawei Ascend P1 U9200..
Completely stock original build (as far as I know) ICS 4.0.3 Build GBRC00B102.
I want to upgrade to JB, but firstly save (backup) my current ROM.
I've followed this thread http://forum.xda-developers.com/showthread.php?t=2132043&page=49 as well as many others, but I cannot access the bootloader.
I have installed adb and fastboot and drivers from many sources. Nothing works.
Hold Vol- & power button still boots normally.
Use adb - adb reboot-bootloader gives Huawei logo frozen, and PC says "waiting for device". The PC brings up install driver dialogue box but no matter what I do, no driver will install. ADB does recognise my phone using "adb devices" command.
Fastboot command does nothing, but I have noticed in my task manager that "fastboot.exe" continually loads and disappears.
Please can someone tell me how to ccess the bootloader so I can install TWRP recovery and backup my ROM??
Apologies if any of the above is unclear - I'm new at flashing/ROMs etc but usually very good at understanding and following computer jargon
Thank you, in advance, for any assistance
Use Vol+ and Power Button
And for the adb,
Have you installed the correct driver?
The adb/usb driver for your device
May this help you
Give me a thank if helped
Sushant Rohan said:
Use Vol+ and Power Button
And for the adb,
Have you installed the correct driver?
The adb/usb driver for your device
Click to expand...
Click to collapse
Thanks for replying
Vol+ and power button enters the recovery section.
I want to unlock the bootloader, so I can install a different recovery module.
As for adb, I'm sure I have the correct drivers. I've tried many different sources, all with same result.
ADB works, but not Fastboot - and I am assuming that is because I can't unlock the bootloader to enter fastboot mode.
Don't install more than one driver, this may cause the problem with adb. Retain only one driver and then try again later
If this cannot resolve your problem reply me, I would try my best to solve this problem
Sushant Rohan said:
Don't install more than one driver, this may cause the problem with adb. Retain only one driver and then try again later
If this cannot resolve your problem reply me, I would try my best to solve this problem
Click to expand...
Click to collapse
Thanks for your reply.
The adb driver didn't work on the first install. And later I did remove them all and reinstall again just once (because I was getting an "adb server expired" error).
Still no luck.
If you have any other suggestions, I'd be most grateful
In the adb shell type
Adb devices
If you see a long number then try the code given above to unlock the bootloader if not then reply me
I've got the number from adb devices.
How/where do I input it?
May be this link help https://www.dc-unlocker.com/free-huawei-bootloader-unlock-tutorial but here your device is not listed, but you can do a try and have the best of hope. If this did not help you give me a reply as you gave me
---------- Post added at 06:42 PM ---------- Previous post was at 06:33 PM ----------
nudder12 said:
I've got the number from adb devices.
How/where do I input it?
Click to expand...
Click to collapse
What you have to do is
Open the adb
Type
adb devices
Adb reboot bootloader
Fastboot oem unlock
May be this help you
Hit the thank button
Sushant Rohan said:
May be this link help (forum made me delete the link to dc-unlocker) but here your device is not listed, but you can do a try and have the best of hope. If this did not help you give me a reply as you gave me
---------- Post added at 06:42 PM ---------- Previous post was at 06:33 PM ----------
What you have to do is
Open the adb
Type
adb devices
Adb reboot bootloader
Fastboot oem unlock
May be this help you
Hit the thank button
Click to expand...
Click to collapse
Thanks again, but I have already tried DC-Unlocker - it doesn't recognise my phone.
I rebooted to the bootloader using adb reboot bootloader,
and then tried the fastboot reboot oem unlock, but it failed with the following message
"FAILED (remote failure)"
Hmmm. Ok I will get the solution of your problem
Hey Sushant Rohan
Many many thanks for trying to help me, but I think now I have got it working
Many times I tried to enter bootloader and the phone wouldn't allow me. Just once in the last 5 days it did. I tried dozens of times!!!
Today, just one time, it allowed me again, and when it did the PC came up with "need to install drivers for Blaze device".
I remember seeing "blaze" on some forums, so I looked there again to see how to install drivers.
I installed them and PC accepted, but then nothing - device not displayed anywhere or anything.
And after that, again I couldn't access the bootloader in many attempts.
I kept trying and kept trying.
Finally, even though I hadn't done anything different, fastboot finally recognised my device (? fastboot) and I flashed the TWRP recovery image using fastboot command.
Fastboot said success!
I rebooted phone into recovery mode - Vol+ and power button, and there it is - the TWRP recovery mode
Now I'll attempt phone backup. (looking good so far)
Again, thanks so much for trying to help me - I really appreciate someone giving their time to try.
I have no idea why it suddenly worked for me when I didn't install anything new or different etc (but I remember reading another forum where someone said they tried 39 times and it finally worked)
I'm sure I'll reply here again if I have any more trouble
Its my pleasure to help someone in trouble
Sushant Rohan said:
Its my pleasure to help someone in trouble
Click to expand...
Click to collapse
Well, the TWRP backup worked, although I was expecting just one file, but there were many - I suppose I'll have to read some more about TWRP backups!!!
But, booting into bootloader or recovery mode still doesn't work by using the phone buttons - but I can get there using adb commands.
That will have to be enough I suppose.
Thanks again for your efforts
Use can also use Clockwork Mod Recovery instead of TWRP. However both are mire or less similar. So enjoy flashing
Sushant Rohan said:
Use can also use Clockwork Mod Recovery instead of TWRP. However both are mire or less similar. So enjoy flashing
Click to expand...
Click to collapse
Hopefully the next steps will be a lot less painful and time consuming than this was.
I hope to upgrade from ICS to JB now - but I might wait a few days - my loved ones will appreciate me not being stuck on the pc and phone all day for a while
huawei p1 u9200
nudder12 said:
Hopefully the next steps will be a lot less painful and time consuming than this was.
I hope to upgrade from ICS to JB now - but I might wait a few days - my loved ones will appreciate me not being stuck on the pc and phone all day for a while
Click to expand...
Click to collapse
Friend, install mod room cyanogend spanorg 11 android 4.4.4 and install your recovery twr 2.7. but when I turn off my phone and connect the charger to charge battery put off because it opens my only way to recover all your options. the truth is a risk that this well. any to reset or something not nice in the team .. ayudammmeeeee please with that spy on Venezuela. this very good functional room totoalmente great detail just that .. thanks .....
You do not need unlocking bootloader
nudder12 said:
Thanks again, but I have already tried DC-Unlocker - it doesn't recognise my phone.
I rebooted to the bootloader using adb reboot bootloader,
and then tried the fastboot reboot oem unlock, but it failed with the following message
"FAILED (remote failure)"
Click to expand...
Click to collapse
visit www.shuame.com download just plug bootloader mode by pressing power and volume +. the program takes care of downloading drivers adb
Was on dirty unicon rom
Decided to revert to stock
flashed stock rom(provided by mr. mohsin)using sp tools v5.1352.01
flashed it in download mode..
Now phone not charging, not detected by pc, no battery icon when connected to pc/charger
Plz help
Any advice other than going to service centre..
can you at least turn on the phone? if not nothing can do other than going to the service center. but since your phone is rooted ,your warranty is already voided so you might have to pay for repairing.
sunny8p said:
Was on dirty unicon rom
Decided to revert to stock
flashed stock rom(provided by mr. mohsin)using sp tools v5.1352.01
flashed it in download mode..
Now phone not charging, not detected by pc, no battery icon when connected to pc/charger
Plz help
Any advice other than going to service centre..
Click to expand...
Click to collapse
you don't have to go to download mode to restore stock using sp flash tool right? I've done it without even turning on the phone. I think that's how you supposed to restore. Try like this: http://androidxda.com/flash-stock-rom-using-smart-phone-flash-tool if that doesn't work, you probably have to go to a service center.
Dhamithl said:
you don't have to go to download mode to restore stock using sp flash tool right? I've done it without even turning on the phone. I think that's how you supposed to restore. Try like this: http://androidxda.com/flash-stock-rom-using-smart-phone-flash-tool if that doesn't work, you probably have to go to a service center.
Click to expand...
Click to collapse
he said
"not detected by pc,"
so I don't think it would work if the phone isn't detected properly.
StormyKnight;5 9 31 47 26 said:
can you at least turn on the phone? if not nothing can do other than going to the service center. but since your phone is rooted ,your warranty is already voided so you might have to pay for repairing.
Click to expand...
Click to collapse
Can't turn on phone
Not detected by pc
Can the service center guys still detect that its rooted?
sunny8p said:
Can't turn on phone
Not detected by pc
Can the service center guys still detect that its rooted?
Click to expand...
Click to collapse
probably yes because when you rooted the phone the super user binary goes to /system/bin or /system/xbin folder
and it won't be deleted unless the phone is updated. so the best way is find someone who repairs the phone with jtag and then you can still keep your warranty.
Brought it back to life
Thanks a lottt guys for helping. ...
I'll sure find a guy who can work with jtag (might need that trick in future)
the only screw up I did was using older version of sp tools
I did the procedure again with v5.1424 and everything got back to normal. .:angel:
Can you help me out?
Can you help me out by telling me the procedure of how you did you turn your phone into life? Because I've same issue with my phone just like yours. So I need your help to turn my phone back into life. :crying:
sunny8p said:
Brought it back to life
Thanks a lottt guys for helping. ...
I'll sure find a guy who can work with jtag (might need that trick in future)
the only screw up I did was using older version of sp tools
I did the procedure again with v5.1424 and everything got back to normal. .:angel:
Click to expand...
Click to collapse
Will the latest version of Sp TOOL help in detecting my phone?
Just remove the battery and try to flash the stock rom through sptools
sunny8p said:
Brought it back to life
Thanks a lottt guys for helping. ...
I'll sure find a guy who can work with jtag (might need that trick in future)
the only screw up I did was using older version of sp tools
I did the procedure again with v5.1424 and everything got back to normal. .:angel:
Click to expand...
Click to collapse
my canvas a1 aq4502 is bricked. could you please help me. it keeps on connecting and disconnecting. therefore i am not able to use sp flash tool:crying:
sunny8p said:
Was on dirty unicon rom
Decided to revert to stock
flashed stock rom(provided by mr. mohsin)using sp tools v5.1352.01
flashed it in download mode..
Now phone not charging, not detected by pc, no battery icon when connected to pc/charger
Plz help
Any advice other than going to service centre..
Click to expand...
Click to collapse
install android one toolkit on your pc. then from there flash a custom recovery to your phone using adb. now download a stock rom and place it in your sd card. then flash the custom rom from custom recovery. i hope it will work.
---------- Post added at 01:58 PM ---------- Previous post was at 01:55 PM ----------
konankiakshay said:
my canvas a1 aq4502 is bricked. could you please help me. it keeps on connecting and disconnecting. therefore i am not able to use sp flash tool:crying:
Click to expand...
Click to collapse
install android one toolkit on your pc. then from there flash a custom recovery to your phone. now download a stock rom and place it in your sd card. then flash the rom from custom recovery. i hope it will work.
konankiakshay said:
my canvas a1 aq4502 is bricked. could you please help me. it keeps on connecting and disconnecting. therefore i am not able to use sp flash tool:crying:
Click to expand...
Click to collapse
I am in the same situation of connection and disconnection of my bricked mmx a26 to pc, have you found a way to get out of this? If yes pls. provide to help me
Bricked & USB not recognized
My micromax canvas a1 is bricked and tried flask it using sp flash 5.14 but the phone is not recognised in the flash
I have Canvas A1, it gets detected and SP starts flashing and completes it. Shows Green tick (ok) but the phone doesn't boot up. How the phone got bricked? Well one of my idiot friend tried flashing with SP flash tool, don't know what he did but after that my phone never booted up. The service centre told they don't have motherboard for the device available. Is there any way to fix it. Can someone please list down all the drivers that are needed, the ROM that has to be flashed and all the steps to take to fix the device. It would be really helpful for everyone who have their device bricked.