Develop Bugs

LG G2 LS980 Sprint - DEAD (only logo LG) - HELP

Hello everybody,
after reading all posts here, I have rooted my phone with IORoot.
After this I have changed build.prop =SPR to =OPEN. When I reboot phone only seem the logo LG.
I tried put stock rom with LGflashtool (http://forum.xda-developers.com/showthread.php?t=2432476).
but return error sayng "incorrect version".
I tried wipe and hard reset, nothing working !
Please , anybody could help ?

allexroc said:
Hello everybody,
after reading all posts here, I have rooted my phone with IORoot.
After this I have changed build.prop =SPR to =OPEN. When I reboot phone only seem the logo LG.
I tried put stock rom with LGflashtool (http://forum.xda-developers.com/showthread.php?t=2432476).
but return error sayng "incorrect version".
I tried wipe and hard reset, nothing working !
Please , anybody could help ?
Click to expand...
Click to collapse
you should try to push the correct build.prop via the adb. then all should work. and don't put OPEN in build.prop you should put spr (small letters)

SOrry but my cellphone is DEAD. ONly firmware update and recovery mode is working.

allexroc said:
SOrry but my cellphone is DEAD. ONly firmware update and recovery mode is working.
Click to expand...
Click to collapse
you still have custom recovery? if yes, adb side load sprint rom from the sprint development section, then flash it (make sure it flashes successful) Now, your phone should be a sprint g2 again. Now try flashing stock sprint rom via lg flasher tool. It should work now.

htc fan89 said:
you still have custom recovery? if yes, adb side load sprint rom from the sprint development section, then flash it (make sure it flashes successful) Now, your phone should be a sprint g2 again. Now try flashing stock sprint rom via lg flasher tool. It should work now.
Click to expand...
Click to collapse
Hi great HTCfan89, tks your response, but I am very poor of acknowledge about how can I use adb ? I think I dont have custom recovery. This cellphone is recently bought from sprint at US and I am in Brazil.
Could you show me the way to use adb ?
I have tried firmware update but nothing happen.
look the attached's figures
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

allexroc said:
Hi great HTCfan89, tks your response, but I am very poor of acknowledge about how can I use adb ? I think I dont have custom recovery. This cellphone is recently bought from sprint at US and I am in Brazil.
Could you show me the way to use adb ?
I have tried firmware update but nothing happen.
look the attached's figures
View attachment 2602721
View attachment 2602722
Click to expand...
Click to collapse
updating through lg flasher tool, will not work. Because, it would think your lg isn't a sprint one anymore. so, first check if you have root, then flash custom recovery via this:
http://forum.xda-developers.com/showthread.php?t=2449670
then, once you have custom recovery, flash an sprint rom from sprint development section. Also, to do this you need basic ADB knowledge which isn't that difficult.

--

Moto G Lollipop Bootlogo

Here is the Lollipop Bootlogo from Motorola. This is taken from the Moto X Lollipop OTA.
I resized it to fit the Moto G with removed unlocked message.
Screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download
View attachment motog-lollipop-stockboot-fixed.zip
Installation
This is a flashable zip, works in custom recovery like Philz, TWRP
or you can do this manually, just extract logo.bin where the fastboot and adb files are
connect the phone to the computer via micro usb, open the folder where the logo.bin file and fastboot/adb files are
open the command prompt in that directory and use the following commands
adb reboot bootloader
fastboot flash logo logo.bin
fastboot reboot

Nice.. Could you possibly get the Google bootlogo? The nexus 6 one but resized for moto g..

marclaniohan said:
Nice.. Could you possibly get the Google bootlogo? The nexus 6 one but resized for moto g..
Click to expand...
Click to collapse
Yes if i can get the firmware image of the device.

AgentChaos said:
Yes if i can get the firmware image of the device.
Click to expand...
Click to collapse
Hmm I don't think that has been released yet... How about the firmware for nexus 9 ?
Nexus images
---------- Post added at 11:43 PM ---------- Previous post was at 11:37 PM ----------
Hmm it might have been done already... All it is, is the Google logo in white on a black bg.. I think its standard for Nexus devices.. Ive just never seen it resized for moto g...

but why do you want a google bootlogo on a moto device? plus the boot animation has the white background with the globe and water ripple effect.
it wouldnt really match.

True ... I am using quarx cm it uses the android l boot animation... I tried to flash the stock moto boot animation on this but results in black screen... No animation

thanks. should work great with material design. probably the best bootlogo so far for moto g.

AgentChaos said:
Here is the Lollipop Bootlogo from Motorola. This is taken from the Moto X Lollipop OTA.
I resized it to fit the Moto G with removed unlocked message.
Click to expand...
Click to collapse
Is it possible to do the same with the stock bootanimation from Moto X Lollipop OTA?

danilocps87 said:
Is it possible to do the same with the stock bootanimation from Moto X Lollipop OTA?
Click to expand...
Click to collapse
It's the same boot animation. It hasn't changed. So I don't really see any point.

AgentChaos said:
It's the same boot animation. It hasn't changed. So I don't really see any point.
Click to expand...
Click to collapse
Oh, ok. I didn't see it yet. I thought it was different.

marclaniohan said:
Nice.. Could you possibly get the Google bootlogo? The nexus 6 one but resized for moto g..
Click to expand...
Click to collapse
If you're looking for the plain black one with the Google logo in it, here you go. Credits to the guy who provided it. http://forum.xda-developers.com/showpost.php?p=56657754&postcount=315

Beautifull !
Install and work ok. Thank´s !

XT1033, not show before animation.
For Android 4.4.4 size of logo.bin is 634418 bytes.
For Android 5.0.0 logo smallest?

i have 5.0.2 moto g 1033
is logo work it?

[RECOVERY][P6S-U06][Unofficial TWRP Recovery 3.0.3-0]

Hi everyone.
Here's my build of TWRP for P6S-U06.
Features:
Supports USB OTG, so you can use USB flash drive as external storage for backups, zip installations.
Because device doesn't support external SD card, I've added feature to make backup of internal storage (to USB flash of course).
Combined with stock EMUI 3.1 recovery. In case of power-on by holding power + vol+ or rebooting into recovery by command or any 3rd part application: will boot in TWRP. In case of local update, OTA-update, "force update" (3buttons method) or factory reset: will boot into EMUI recovery.
Off-mode charger updated from EMUI 3.1
custom.bin and cust symlinks are saved/restored (if they were exist) in case of Wipe/Format Data. So there not gonna be "cust" issues after factory reset in TWRP.
Requirements:
Unlocked bootloader
Android 4.4.2 - 5.1.1
Installation:
Reboot in fastboot mode
Flash image via fastboot
Code:
fastboot flash recovery TWRP_Recovery-3.0.3-0.img
fastboot reboot
From TWRP: Press "Install" and select zip-archive
Notes:
Because internal storage is not a separate block device and just a subfolder of "userdata" partition, before you can make backup/restore of internal storage, first you should do Mount -> Data.
It will not work on P6, it's for P6S only.
Download: TWRP_Recovery-3.0.3-0.img
For TWRP: TWRP_Recovery-3.0.3-0.zip
Previous:
Download: TWRP_Recovery-3.0.2-0.img
For TWRP: TWRP_Recovery-3.0.2-0.zip
Download: TWRP_Recovery-3.0.0-0.img
For TWRP: TWRP_Recovery-3.0.0-0.zip
TWRP_Recovery-2.8.5.0.img

Is it possible to get this new version for our beloved P6?

tileeq said:
Is it possible to get this new version for our beloved P6?
Click to expand...
Click to collapse
http://4pda.ru/forum/index.php?showtopic=539568&view=findpost&p=37725285
If you can't download from 4pda, ask for the author of build, here is also here on XDA: Razziell

Hi Kosyan, how to roll back to stock recovery?
Thanks
Edit: I know how rollback but in 4pda is it not possible to download the stock recovery I need!
Can you post it hier please?

Can you please share TWRP 2.8.7.0 material design by Razziell? I can't login on 4pda.ru because of a Russian captcha!

@Kostyan_nsk, could you send me a link to your device tree please. Want to check something out real quick.

I wasn't upload my dt. I'm too lazy for this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PM me what exactly are you interested in?

WHat if i have android 4.2.2 ?? is it gonna work ?

kye04 said:
WHat if i have android 4.2.2 ?? is it gonna work ?
Click to expand...
Click to collapse
No, it will not boot.

THANK YOU !!!
Tell you my story : a week ago i bought a P6S-U06 from aliexpress. It came with the 4.2 system. Interesting was that there was no update , not by wifi nor by Hisuite.
And i wanted to update to 4.4 And i try all kind of recoveries and boot.img untill i bricked it.... Actually i got the bootloader locked and i can not flash anytrhing anymore.....
Now i bought a second P6S-U06 that came with 4.4 . Thanks to your twrp, now i have twrp on my phone.
Please help me also with a nice kernel and a nice rom. I found some stuff on 4pda forum but i do not know russian and i cannot make an account to download .
If you do not want to post here, please send them in privat.
Once again , THANK YOU !!!
My phone is now TWRP with P6S-U06V100R001C17B606 .

Hi .I have 2 P6S-U06 . Both of them 4.4.2 In one of them i flashed thru fastboot and twrp works perfect.
The other one simply does not accept that. see attached picture .
I forced it installing Flashify . I wrote the recovery with it. After reboot, the leds start blicking red and green and after that a screen appears saying something happened sith my boot, press power button for 6 seconds. I turn off the phone , restart it, it boots to system but stock recovery...
How is this possible ?
WHat can i do ?
Also is there a 5.1.1 image that can be updated as update.app in dload folder ?

V350AWM30e ATT_US stock & rooted partitions

V350AWM30e.zip (3.7GB)
I pulled the stock unmodified slot partitions from a fully updated AT&T V35.
I modified them with Magisk and TWRP, and disabled Dm-Verity and ForceEncrypt
I flashed them to another V35AWM that had previously been crossflashed with V350ULM 20f.
Now I stock rooted Android 10 working nicely on my main driver.
I can think of several ways to flash the partitions:
• Using ADB in TWRP (what I did)
• Using ADP from a running rooted system
• One by one with QFIL
The archive includes the unmodified partions, the modified partitions, the packages that I used to modify the partions, some notes, and a script that I used to flash them in TWRP.
If I were doing it again from the start, I would not cross flash, because there are differences in the partition tables. Despite what the guides say, I think that the bootloader can be unlocked from Android 9 or 10, using QFIL. I think that this would work: enable bootloader unlock in developer settings,, flash the engineering bootloader with QFIL, wipe laf, unlock with fastboot, flash the modified boot.img with QFIL, boot into recovery, flash the other partitions from there.
These files are for developers only. You can easily brick your phone and I won't help.

Thank you for this!

amazing
let's hope something useful comes to the end user

Thanks so much for putting this together. Should I anticipate any issues doing TWRP ADB sideload coming from a Korean rom?

Hi! Yesterday I tried to download from the link, but the following error popped up on Mac OS. On Windows, the link just doesn't open. In short, it just can't download...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

smir_ant said:
Hi! Yesterday I tried to download from the link, but the following error popped up on Mac OS. On Windows, the link just doesn't open. In short, it just can't download...
Click to expand...
Click to collapse
I can download it on windows, it's just extremely slow at 0.5 Mb/s

ghylander said:
I can download it on windows, it's just extremely slow at 0.5 Mb/s
Click to expand...
Click to collapse
yeap, from sative safari (without addblock and another addons) i download too, slow, but success,
thanks for reply

jacob019 said:
V350AWM30e.zip (3.7GB)
I pulled the stock unmodified slot partitions from a fully updated AT&T V35.
I modified them with Magisk and TWRP, and disabled Dm-Verity and ForceEncrypt
I flashed them to another V35AWM that had previously been crossflashed with V350ULM 20f.
Now I stock rooted Android 10 working nicely on my main driver.
I can think of several ways to flash the partitions:
• Using ADB in TWRP (what I did)
• Using ADP from a running rooted system
• One by one with QFIL
The archive includes the unmodified partions, the modified partitions, the packages that I used to modify the partions, some notes, and a script that I used to flash them in TWRP.
If I were doing it again from the start, I would not cross flash, because there are differences in the partition tables. Despite what the guides say, I think that the bootloader can be unlocked from Android 9 or 10, using QFIL. I think that this would work: enable bootloader unlock in developer settings,, flash the engineering bootloader with QFIL, wipe laf, unlock with fastboot, flash the modified boot.img with QFIL, boot into recovery, flash the other partitions from there.
These files are for developers only. You can easily brick your phone and I won't help.
Click to expand...
Click to collapse
Could you reporst the download? I just installed windows 11, so maybe that's the issue, but I keep getting "v350awm30e.zip cannot be downloaded securely." and it refuses to even start the download. Any help would be appreciated.

Working fine for me. Try using https instead of http:
https://jacobstoner.com/V350AWM30e.zip

jacob019 said:
Working fine for me. Try using https instead of http:
https://jacobstoner.com/V350AWM30e.zip
Click to expand...
Click to collapse
Thanks for the fast reply here and in a DM. For anyone new to windows 11 like me, if you try to download from any website that doesn't have that S in it (http vs https), it will not let you download. After a quick google, you can still download from places like this by right-clicking on the download and selecting "keep this".
You can also click on the lock icon in the url bar and then going to permissions and selecting the option to download unsecure content from this website.
Cheers.

Hi everyone. Do you know where can I download a stock ATT firmware for lg v35? Mine is network locked and I have the code to unlock it but I have to be on original firmware. Please help me if you can. Thanks

Installing Nethunter

Hi! I want to root and install Nethunter on my Motorola Droid Turbo 2. Does anyone have instructions on which utilities are needed and steps to making this possible. My phone model is
MOTXT1585GBN (Verizon)

ArcadianBlue said:
Hi! I want to root and install Nethunter on my Motorola Droid Turbo 2. Does anyone have instructions on which utilities are needed and steps to making this possible. My phone model is
MOTXT1585GBN (Verizon)
Click to expand...
Click to collapse
Hi, you need to unlock bootloader and then flash Magisk using twrp.

Jan Skokan said:
Hi, you need to unlock bootloader and then flash Magisk using twrp.
Click to expand...
Click to collapse
It is a Verizon phone, heard recently that their boot loader cannot be unlocked. Is this true?

ArcadianBlue said:
It is a Verizon phone, heard recently that their boot loader cannot be unlocked. Is this true?
Click to expand...
Click to collapse
I'm hearing about this brand of phone for the first time What is your exact model? I will try to find the tutorial for your phone

Jan Skokan said:
I'm hearing about this brand of phone for the first time What is your exact model? I will try to find the tutorial for your phone
Click to expand...
Click to collapse
Motorola Droid Turbo 2 Model: MOTXT1585GBN Carrier: Verizon
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

ArcadianBlue said:
Motorola Droid Turbo 2 Model: MOTXT1585GBN Carrier: VerizonView attachment 5863623
Click to expand...
Click to collapse
Ah, so a Motorola phone I also have a Motorola and I have it rooted, so for sure the phone can be rooted Take a look at this tutorial, it should work for all Moto devices. If you have a problem with something, write me and I'll try to help you

Jan Skokan said:
Ah, so a Motorola phone I also have a Motorola and I have it rooted, so for sure the phone can be rooted Take a look at this tutorial, it should work for all Moto devices. If you have a problem with something, write me and I'll try to help you
Click to expand...
Click to collapse
Ok, so Verizon version can be rooted? What exact steps did you take? Going to use stock firmware, de-bloated it with Titanium Backup. Thanks

ArcadianBlue said:
Ok, so Verizon version can be rooted? What exact steps did you take? Going to use stock firmware, de-bloated it with Titanium Backup. Thanks
Click to expand...
Click to collapse
First I unlocked the bootloader thanks to this page and then installed twrp for my phone and installed Magisk via twrp But you can also do it by downloading the firmware for your phone and extracting the boot file from that firmware and editing the boot file in Magisk, the copy the modified boot file to your PC, then go to fastboot mode and enter the command fastboot flash boot boot.img

Jan Skokan said:
First I unlocked the bootloader thanks to this page and then installed twrp for my phone and installed Magisk via twrp But you can also do it by downloading the firmware for your phone and extracting the boot file from that firmware and editing the boot file in Magisk, the copy the modified boot file to your PC, then go to fastboot mode and enter the command fastboot flash boot boot.img
Click to expand...
Click to collapse
Ok, I was just looking at this site yesterday! Will do! Thanks!

Jan Skokan said:
First I unlocked the bootloader thanks to this page and then installed twrp for my phone and installed Magisk via twrp But you can also do it by downloading the firmware for your phone and extracting the boot file from that firmware and editing the boot file in Magisk, the copy the modified boot file to your PC, then go to fastboot mode and enter the command fastboot flash boot boot.img
Click to expand...
Click to collapse
You cant, the verizon droid turbo 2 does not allow you to unlock your bootloader, its been like this ever since launch, please check out https://forum.xda-developers.com/t/droid-turbo-2-lets-figure-out-how-to-get-root.3391906