V350AWM30e.zip (3.7GB)
I pulled the stock unmodified slot partitions from a fully updated AT&T V35.
I modified them with Magisk and TWRP, and disabled Dm-Verity and ForceEncrypt
I flashed them to another V35AWM that had previously been crossflashed with V350ULM 20f.
Now I stock rooted Android 10 working nicely on my main driver.
I can think of several ways to flash the partitions:
• Using ADB in TWRP (what I did)
• Using ADP from a running rooted system
• One by one with QFIL
The archive includes the unmodified partions, the modified partitions, the packages that I used to modify the partions, some notes, and a script that I used to flash them in TWRP.
If I were doing it again from the start, I would not cross flash, because there are differences in the partition tables. Despite what the guides say, I think that the bootloader can be unlocked from Android 9 or 10, using QFIL. I think that this would work: enable bootloader unlock in developer settings,, flash the engineering bootloader with QFIL, wipe laf, unlock with fastboot, flash the modified boot.img with QFIL, boot into recovery, flash the other partitions from there.
These files are for developers only. You can easily brick your phone and I won't help.
Thank you for this!
amazing
let's hope something useful comes to the end user
Thanks so much for putting this together. Should I anticipate any issues doing TWRP ADB sideload coming from a Korean rom?
Hi! Yesterday I tried to download from the link, but the following error popped up on Mac OS. On Windows, the link just doesn't open. In short, it just can't download...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
smir_ant said:
Hi! Yesterday I tried to download from the link, but the following error popped up on Mac OS. On Windows, the link just doesn't open. In short, it just can't download...
Click to expand...
Click to collapse
I can download it on windows, it's just extremely slow at 0.5 Mb/s
ghylander said:
I can download it on windows, it's just extremely slow at 0.5 Mb/s
Click to expand...
Click to collapse
yeap, from sative safari (without addblock and another addons) i download too, slow, but success,
thanks for reply
jacob019 said:
V350AWM30e.zip (3.7GB)
I pulled the stock unmodified slot partitions from a fully updated AT&T V35.
I modified them with Magisk and TWRP, and disabled Dm-Verity and ForceEncrypt
I flashed them to another V35AWM that had previously been crossflashed with V350ULM 20f.
Now I stock rooted Android 10 working nicely on my main driver.
I can think of several ways to flash the partitions:
• Using ADB in TWRP (what I did)
• Using ADP from a running rooted system
• One by one with QFIL
The archive includes the unmodified partions, the modified partitions, the packages that I used to modify the partions, some notes, and a script that I used to flash them in TWRP.
If I were doing it again from the start, I would not cross flash, because there are differences in the partition tables. Despite what the guides say, I think that the bootloader can be unlocked from Android 9 or 10, using QFIL. I think that this would work: enable bootloader unlock in developer settings,, flash the engineering bootloader with QFIL, wipe laf, unlock with fastboot, flash the modified boot.img with QFIL, boot into recovery, flash the other partitions from there.
These files are for developers only. You can easily brick your phone and I won't help.
Click to expand...
Click to collapse
Could you reporst the download? I just installed windows 11, so maybe that's the issue, but I keep getting "v350awm30e.zip cannot be downloaded securely." and it refuses to even start the download. Any help would be appreciated.
Working fine for me. Try using https instead of http:
https://jacobstoner.com/V350AWM30e.zip
jacob019 said:
Working fine for me. Try using https instead of http:
https://jacobstoner.com/V350AWM30e.zip
Click to expand...
Click to collapse
Thanks for the fast reply here and in a DM. For anyone new to windows 11 like me, if you try to download from any website that doesn't have that S in it (http vs https), it will not let you download. After a quick google, you can still download from places like this by right-clicking on the download and selecting "keep this".
You can also click on the lock icon in the url bar and then going to permissions and selecting the option to download unsecure content from this website.
Cheers.
Hi everyone. Do you know where can I download a stock ATT firmware for lg v35? Mine is network locked and I have the code to unlock it but I have to be on original firmware. Please help me if you can. Thanks
Related
Tomorrow i will receive this new Cubot series with fingerprint and good specs.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Official Page:
http://www.cubot.net/Index.php/mobile/view/id/263.html
Reserved for review and modding
Cubot claim that it has a 3000mAh battery.
Battery mAh measured to 2795 here http://peecee.dk/uploads/012016/20160123_204834.jpg
Geekbench 3 battery test: http://browser.primatelabs.com/battery3/197467 (09:35:40 / 3589)
thanks S7yler , not bad, also battery test seems to be very good!
I wait if from EFOX, and i hope to have mine today or tomorrow!
Just Arrived.. .white color in my sample!
first challenge was to create TWRP .. successfull!
http://www.needrom.com/download/twrp-2-8-7-3-material-play-megthebest/
Archive contain Boot Unlocked and TWRP Material Play ported by me!
Tested successfully with V06 January 2016 rom.
1- Download and Install correctly Mediatek Preloader drivers
( Take care on Windows 8.1/10 drivers, you need to disable driver signature before install
https://www.youtube.com/watch?v=50pD0mONm44
http://laurentiumihet.ro/technology...-for-32-64-bit-drivers-installation-tutorial/
https://thebroodle.com/microsoft/windows/install-mediatek-mt65xx-usb-vcom-drivers-windows-8-8-1/
2- enter Engineering Mode MTK with Dialer code *#*#3646633#*#*, go into log and debugging, tap on user2root and tap on ROOT, shut down smartphone.
3- With flashtool load MT6735_Android_Scatter-Play.txt
4- Select download and connect smartphone to pc (smartphone must be powered off)… in few seconds will start the process and the new TWRP will be flashed.
3.1- To restore original stock recovery, you need load ad point 3 the file MT6735_Android_Scatter.txt
P.P.S to enter in the recovery, power off the smartphone, push VOL + and Power at the same time, you will see three words with VOL + you move selection, with VOL – you must select Recovery
To have root flash with TWRP the archive supersu.zip found here: https://download.chainfire.eu/696/supersu/
Unboxing & Review (Italian language) :
any custom roms for that phone ?
megthebest said:
Just Arrived.. .white color in my sample!
first challenge was to create TWRP .. successfull!
Archive contain Boot Unlocked and TWRP Material Play ported by me!
Tested successfully with V06 January 2016 rom.
Click to expand...
Click to collapse
This is great work. Have you got a version of this that works with the latest firmware? I upgraded my firmware to the June v10 firmware and when I put this version on it just boot loops the phone.
Thanks.
So no chance of an updated TWRP then megthebest?
I updated the TWRP myself and put it on needrom, for anyone who wants to use TWRP with the latest official ROM. I tested it on my phone and it works I used it to root the phone and install xposed framework.
All credit to megthebest, it is his work.
http://www.needrom.com/download/twrp-2-8-7-3-material-play-megthebest-3/
Thanks Famineuk! Can I update to the new version directly from twrp recovery or do I have to use the flashtool again?
I did it using the flash tool. I never tried it directly through TWRP. I think you could try it then if it didn't work you would still be able to flash it through the flash tool.
Famineuk said:
This is great work. Have you got a version of this that works with the latest firmware? I upgraded my firmware to the June v10 firmware and when I put this version on it just boot loops the phone.
Thanks.
Click to expand...
Click to collapse
Where did you get the v10 ?
i got v9 OTA, but no v10
have you used the one from needrom ? i see no other source.
Root is possible with KingoRoot (NOT Kingroot)
johnfdoe said:
Where did you get the v10 ?
i got v9 OTA, but no v10
have you used the one from needrom ? i see no other source.
Click to expand...
Click to collapse
This is a link to version 10
http://www.needrom.com/download/cubot-s550/
Will an update using the flash tool erase the internal memory of my phone(titanium backup, photos, etc)? Can I update to V10 using TWRP recovery or do I have to use the flash tool again?
baggos12 said:
Will an update using the flash tool erase the internal memory of my phone(titanium backup, photos, etc)? Can I update to V10 using TWRP recovery or do I have to use the flash tool again?
Click to expand...
Click to collapse
Only Flashtool to upgrade.
You may try to maintain Data if in flashtool you will deselect Userdata partition before start flashing (and Recovery partition if you want to maintain TWRP).
You loose root and it will be not guaranteed that with new v10 rom TWRP will work again (possible change in kernel)
megthebest said:
Only Flashtool to upgrade.
You may try to maintain Data if in flashtool you will deselect Userdata partition before start flashing (and Recovery partition if you want to maintain TWRP).
You loose root and it will be not guaranteed that with new v10 rom TWRP will work again (possible change in kernel)
Click to expand...
Click to collapse
you have twrp for s550
Hey there,
I want to switch to these htt ps://download .lineageos. org/oneplus2 LOS 14.1 builds as I'm currently using LOS 14.1 by daktak. (Sorry, not allowed to post links right now..)
There haven't been any updates for almost 3 weeks now and I don't think that this will be updated any further.
Well, simply booting into recovery mode and flashing the newest LOS zip doesn't work for me. I guess it's because I'm not wiping my system partition, just data + dalvik cache... I thought I can simply switch/update from an older version of LOS? Do I really need to wipe everything again so I can install the LOS builds I've mentioned above?
Also I don't really understand the difference between signed and unsigned zips. The zip I want to flash is signed. Is this why I get "Failed to flash" as an error message in recovery? Does "signed" mean, I need to root my OP2 again and my current root will be removed?
Current LOS version 14.1-20170213-UNOFFICIAL-oneplus2 by daktak
Yakumichan said:
Hey there,
I want to switch to these htt ps://download .lineageos. org/oneplus2 LOS 14.1 builds as I'm currently using LOS 14.1 by daktak. (Sorry, not allowed to post links right now..)
There haven't been any updates for almost 3 weeks now and I don't think that this will be updated any further.
Well, simply booting into recovery mode and flashing the newest LOS zip doesn't work for me. I guess it's because I'm not wiping my system partition, just data + dalvik cache... I thought I can simply switch/update from an older version of LOS? Do I really need to wipe everything again so I can install the LOS builds I've mentioned above?
Also I don't really understand the difference between signed and unsigned zips. The zip I want to flash is signed. Is this why I get "Failed to flash" as an error message in recovery? Does "signed" mean, I need to root my OP2 again and my current root will be removed?
Current LOS version 14.1-20170213-UNOFFICIAL-oneplus2 by daktak
Click to expand...
Click to collapse
It is all explained here:
http://lineageos.org/Update-and-Build-Prep/
jhedfors said:
It is all explained here:
http://lineageos.org/Update-and-Build-Prep/
Click to expand...
Click to collapse
Thank you for your quick reply! After some issues using adb I could not fix (but I don't need to as I already did this somehow earlier for CM13) I managed to install LOS14.1 HYPE!
Maybe you could help me with my problem?
"No command 'fastboot' found"... But I can find my phone using adb devices.
Screenshot attached...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Yakumichan said:
Thank you for your quick reply! After some issues using adb I could not fix (but I don't need to as I already did dis somehow earlier for CM13) I managed to install LOS14.1 HYPE!
Maybe you could help me with my problem?
"No command 'fastboot' found"... But I can find my phone using adb devices.
Screenshot attached...
Click to expand...
Click to collapse
I am not an expert on adb/fastboot, but is the fastboot binary in the directory? It is also a little difficult to interpret the language in your sceenshot.
jhedfors said:
I am not an expert on adb/fastboot, but is the fastboot binary in the directory? It is also a little difficult to interpret the language in your sceenshot.
Click to expand...
Click to collapse
Right, sorry. It's German and it says that the command "fastboot" either has been written wrong or hasn't been found.
And also: Yes, it is:
I think you need to check your drivers
The device should be connected via adb interface driver or android driver
After that you should be able to see ur device
I have bootloader unlocked and TWRP 3.2 installed.
Normally most ROM's are not finished installing always stuck in patching system image unconditionally.
LineageOS 14.1 it was installed but the screen was black with the blue LED on.
I have the stock S251 firmware version of P2a42 with Lenovo P2c72 model.
I tried to format data to EXT4 but doesn't work.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
kalmas77 said:
I have bootloader unlock and TWRP 3.2 installed.
Normally most ROM's are not finished installing always stuck in patching system image unconditionally.
LineageOS 14.1 it was installed but the screen was black with the blue LED on.
I have the stock S251 firmware version of P2a42 with Lenovo P2c72 model.
I tried to format data to EXT4 but does't work.
Click to expand...
Click to collapse
Are you 100% sure the bootloader is unlocked ? Did you unlock the bootloader via fastboot or you just waited until the 14 days countdown ended ?
medwatt said:
Are you 100% sure the bootloader is unlocked ? Did you unlock the bootloader via fastboot or you just waited until the 14 days countdown ended ?
Click to expand...
Click to collapse
Yes, I'm 100% sure. I unlocked via fastboot with your thread :good: https://forum.xda-developers.com/lenovo-p2/how-to/lenovo-p2-owners-click-t3668029
kalmas77 said:
Yes, I'm 100% sure. I unlocked via fastboot with your thread :good: https://forum.xda-developers.com/lenovo-p2/how-to/lenovo-p2-owners-click-t3668029
Click to expand...
Click to collapse
What version of Android are/were you on ? You need to be on at least Android 7 S244 to be able to flash LOS 14.1.
What I'd suggest you to do is flash the stock ROM all over again. See this. I have the c72 version myself and I've never encountered the issue you mentioned.
medwatt said:
What version of Android are/were you on ? You need to be on at least Android 7 S244 to be able to flash LOS 14.1.
What I'd suggest you to do is flash the stock ROM all over again. See this. I have the c72 version myself and I've never encountered the issue you mentioned.
Click to expand...
Click to collapse
Yes, I installed 5. P2a42_S244_170725_ROW_fastboot.7z manually through fastboot and updated later to S251 through OTA. LineageOS 14.1 it is and example, which ROMs works for you? I am looking a Android 8 Oreo custom ROM. Do you have to change partion data to EXT4 or something else? I thought it was because I have the C72 version.
kalmas77 said:
Yes, I installed 5. P2a42_S244_170725_ROW_fastboot.7z manually through fastboot and updated later to S251 through OTA. LineageOS 14.1 it is and example, which ROMs works for you? I am looking a Android 8 Oreo custom ROM. Do you have to change partion data to EXT4 or something else? I thought it was because I have the C72 version.
Click to expand...
Click to collapse
I've tried most of the ROMs here and they all work.
I had the same issue while trying to install new AOSiP 8.1 rom, I have unlocked bootloader, latest TWRP but now I am stuck with this error:
failed to mount /data device or resource busy
I cannot install any rom nor wipe data anymore. Stuck on LENOVO blue logo with the android with the lock in the belly! Help please!
PS: I can reboot to fastboot or TWRP
EDIT: i solved the issue rebooting twice from TWRP to TWRP again and making it permanent on the system, now rom is doing first boot.
Thanks, I always making permanent but apparently it was not enough. Now it's working. Probably I only need to boot TWRP through buttons instead of using fastboot commands to making permanent.
This is the RogPhone 2's TOOL ALL IN ONE Discussion Thread more info and download go to the Original Thread
TOOL ALL IN ONE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ADVANCED OPTIONS
FUNCTIONS
Install Drivers
Install Drivers
Unlock Bootloader
Lock Bootloader (use carefully)
Flash TWRP Recovery
Flash Stock Recovery
Flash Stock Factory Image
Automatic ROOT
Install APKs
Uninstall APKs
Take a Screenshot
Take a Screen Reocrd
Flash Partitions
Erase All Data (This function can decrypt the phone)
Reboot Phone
Update the Tool to latest version
Update Adb and Fastboot to latest version
Set Adb and Fastboot priviliges in system wide
Install Zip directly from PC (Required TWRP on phone)(These functions work perfectly on my pc but i have perfect adb drivers on my pc and perfect TWRP on my phone)
Flash Fastboot ROM
Delete downloaded files
ADB File Manager
DEVICE LIST
If you want you can send a request to add a new device here:
New Device Request Form
Device List
DOWNLOAD
Original Thread
DONATE LINK
If you want to support the project please consider making a donation, thanks.
Sweet was waiting for this!
This is HUGE! Thank you so much for the hard working.
can you unlock the bootloader with this? asus rog phone 2
Hi,
Is possible to use this tool for to change fingerprint version CN to WW?
Manzoandroid said:
Hi,
Is possible to use this tool for to change fingerprint version CN to WW?
Click to expand...
Click to collapse
Nope
Can we use this to downgrade to a9?
jkieffer46 said:
Can we use this to downgrade to a9?
Click to expand...
Click to collapse
Having issues right? I am looking for a way to Downgrade too..
jkieffer46 said:
Can we use this to downgrade to a9?
Click to expand...
Click to collapse
You can flash full stock rom from TWRP
mauronofrio said:
You can flash full stock rom from TWRP
Click to expand...
Click to collapse
Yes can I flash full stock from a10 to a9 with no problems?
jkieffer46 said:
Yes can I flash full stock from a10 to a9 with no problems?
Click to expand...
Click to collapse
You can use the link below to downgrade A10 to A9.
Same ss other updates, just place the zip in root of storage and reboot. The downgrade update will be detected then click to install. Note: downgrading will erase all data
https://dlcdnets.asus.com/pub/ASUS/...S_I001_1-ASUS-18.0631.2001.64-1.1.92-user.zip
mauronofrio said:
This is the RogPhone 2's TOOL ALL IN ONE Discussion Thread more info and download go to the Original Thread
TOOL ALL IN ONE
ADVANCED OPTIONS
FUNCTIONS
Install Drivers
Install Drivers
Unlock Bootloader
Lock Bootloader (use carefully)
Flash TWRP Recovery
Flash Stock Recovery
Flash Stock Factory Image
Automatic ROOT
Install APKs
Uninstall APKs
Take a Screenshot
Take a Screen Reocrd
Flash Partitions
Erase All Data (This function can decrypt the phone)
Reboot Phone
Update the Tool to latest version
Update Adb and Fastboot to latest version
Set Adb and Fastboot priviliges in system wide
Install Zip directly from PC (Required TWRP on phone)(These functions work perfectly on my pc but i have perfect adb drivers on my pc and perfect TWRP on my phone)
Flash Fastboot ROM
Delete downloaded files
ADB File Manager
DEVICE LIST
If you want you can send a request to add a new device here:
New Device Request Form
Device List
DOWNLOAD
Original Thread
DONATE LINK
If you want to support the project please consider making a donation, thanks.
Click to expand...
Click to collapse
sir can i unlock bootloader unofficially with this tool?? if not can u pls add the support .. i will surely help in return by donation some bucks.
Amazing!!!!
Does this tool still work with android 10. Unlock bootloader and locking bootloader again. Can anyone confirm .
for some reason when ever i boot into booloader the tool won't recognize the pone. it only shows up when the phone is on
Hi! I want to root and install Nethunter on my Motorola Droid Turbo 2. Does anyone have instructions on which utilities are needed and steps to making this possible. My phone model is
MOTXT1585GBN (Verizon)
ArcadianBlue said:
Hi! I want to root and install Nethunter on my Motorola Droid Turbo 2. Does anyone have instructions on which utilities are needed and steps to making this possible. My phone model is
MOTXT1585GBN (Verizon)
Click to expand...
Click to collapse
Hi, you need to unlock bootloader and then flash Magisk using twrp.
Jan Skokan said:
Hi, you need to unlock bootloader and then flash Magisk using twrp.
Click to expand...
Click to collapse
It is a Verizon phone, heard recently that their boot loader cannot be unlocked. Is this true?
ArcadianBlue said:
It is a Verizon phone, heard recently that their boot loader cannot be unlocked. Is this true?
Click to expand...
Click to collapse
I'm hearing about this brand of phone for the first time What is your exact model? I will try to find the tutorial for your phone
Jan Skokan said:
I'm hearing about this brand of phone for the first time What is your exact model? I will try to find the tutorial for your phone
Click to expand...
Click to collapse
Motorola Droid Turbo 2 Model: MOTXT1585GBN Carrier: Verizon
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ArcadianBlue said:
Motorola Droid Turbo 2 Model: MOTXT1585GBN Carrier: VerizonView attachment 5863623
Click to expand...
Click to collapse
Ah, so a Motorola phone I also have a Motorola and I have it rooted, so for sure the phone can be rooted Take a look at this tutorial, it should work for all Moto devices. If you have a problem with something, write me and I'll try to help you
Jan Skokan said:
Ah, so a Motorola phone I also have a Motorola and I have it rooted, so for sure the phone can be rooted Take a look at this tutorial, it should work for all Moto devices. If you have a problem with something, write me and I'll try to help you
Click to expand...
Click to collapse
Ok, so Verizon version can be rooted? What exact steps did you take? Going to use stock firmware, de-bloated it with Titanium Backup. Thanks
ArcadianBlue said:
Ok, so Verizon version can be rooted? What exact steps did you take? Going to use stock firmware, de-bloated it with Titanium Backup. Thanks
Click to expand...
Click to collapse
First I unlocked the bootloader thanks to this page and then installed twrp for my phone and installed Magisk via twrp But you can also do it by downloading the firmware for your phone and extracting the boot file from that firmware and editing the boot file in Magisk, the copy the modified boot file to your PC, then go to fastboot mode and enter the command fastboot flash boot boot.img
Jan Skokan said:
First I unlocked the bootloader thanks to this page and then installed twrp for my phone and installed Magisk via twrp But you can also do it by downloading the firmware for your phone and extracting the boot file from that firmware and editing the boot file in Magisk, the copy the modified boot file to your PC, then go to fastboot mode and enter the command fastboot flash boot boot.img
Click to expand...
Click to collapse
Ok, I was just looking at this site yesterday! Will do! Thanks!
Jan Skokan said:
First I unlocked the bootloader thanks to this page and then installed twrp for my phone and installed Magisk via twrp But you can also do it by downloading the firmware for your phone and extracting the boot file from that firmware and editing the boot file in Magisk, the copy the modified boot file to your PC, then go to fastboot mode and enter the command fastboot flash boot boot.img
Click to expand...
Click to collapse
You cant, the verizon droid turbo 2 does not allow you to unlock your bootloader, its been like this ever since launch, please check out https://forum.xda-developers.com/t/droid-turbo-2-lets-figure-out-how-to-get-root.3391906