Hello everybody,
after reading all posts here, I have rooted my phone with IORoot.
After this I have changed build.prop =SPR to =OPEN. When I reboot phone only seem the logo LG.
I tried put stock rom with LGflashtool (http://forum.xda-developers.com/showthread.php?t=2432476).
but return error sayng "incorrect version".
I tried wipe and hard reset, nothing working !
Please , anybody could help ?
allexroc said:
Hello everybody,
after reading all posts here, I have rooted my phone with IORoot.
After this I have changed build.prop =SPR to =OPEN. When I reboot phone only seem the logo LG.
I tried put stock rom with LGflashtool (http://forum.xda-developers.com/showthread.php?t=2432476).
but return error sayng "incorrect version".
I tried wipe and hard reset, nothing working !
Please , anybody could help ?
Click to expand...
Click to collapse
you should try to push the correct build.prop via the adb. then all should work. and don't put OPEN in build.prop you should put spr (small letters)
SOrry but my cellphone is DEAD. ONly firmware update and recovery mode is working.
allexroc said:
SOrry but my cellphone is DEAD. ONly firmware update and recovery mode is working.
Click to expand...
Click to collapse
you still have custom recovery? if yes, adb side load sprint rom from the sprint development section, then flash it (make sure it flashes successful) Now, your phone should be a sprint g2 again. Now try flashing stock sprint rom via lg flasher tool. It should work now.
htc fan89 said:
you still have custom recovery? if yes, adb side load sprint rom from the sprint development section, then flash it (make sure it flashes successful) Now, your phone should be a sprint g2 again. Now try flashing stock sprint rom via lg flasher tool. It should work now.
Click to expand...
Click to collapse
Hi great HTCfan89, tks your response, but I am very poor of acknowledge about how can I use adb ? I think I dont have custom recovery. This cellphone is recently bought from sprint at US and I am in Brazil.
Could you show me the way to use adb ?
I have tried firmware update but nothing happen.
look the attached's figures
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
allexroc said:
Hi great HTCfan89, tks your response, but I am very poor of acknowledge about how can I use adb ? I think I dont have custom recovery. This cellphone is recently bought from sprint at US and I am in Brazil.
Could you show me the way to use adb ?
I have tried firmware update but nothing happen.
look the attached's figures
View attachment 2602721
View attachment 2602722
Click to expand...
Click to collapse
updating through lg flasher tool, will not work. Because, it would think your lg isn't a sprint one anymore. so, first check if you have root, then flash custom recovery via this:
http://forum.xda-developers.com/showthread.php?t=2449670
then, once you have custom recovery, flash an sprint rom from sprint development section. Also, to do this you need basic ADB knowledge which isn't that difficult.
--
Related
I was flashing back to stock rom using this and this method I even managed to flashed it twice successfully last nite but now when I'm trying to flash it the same way it says this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I don't know what went wrong...anyone have any idea?
Have you had it in lg software mode?
Sent from my LG-E986 using xda app-developers app
tomi001 said:
Have you had it in lg software mode?
Sent from my LG-E986 using xda app-developers app
Click to expand...
Click to collapse
what do u mean? sorry this my first LG phone so I'm kinda new to everything here
Ishan Sardar said:
what do u mean? sorry this my first LG phone so I'm kinda new to everything here
Click to expand...
Click to collapse
When you connect the phone to the computer you can chose: mtp mode, only charge mode, lg software mode...
tomi001 said:
When you connect the phone to the computer you can chose: mtp mode, only charge mode, lg software mode...
Click to expand...
Click to collapse
I did it on "download mode" keeping the phone turned on doesn't seem to work..it always end up saying please connect the phone with computer. I did flashed the phone twice on download mode successfully. Does flashing in software mode works? what mode do you use to flash?
Ishan Sardar said:
I did it on "download mode" keeping the phone turned on doesn't seem to work..it always end up saying please connect the phone with computer. I did flashed the phone twice on download mode successfully. Does flashing in software mode works? what mode do you use to flash?
Click to expand...
Click to collapse
I use lg mobile support tool. I connect the phone with the lg software mode. Then i click on the top update recovery. The software downloads and i just wait. When the download finishes the phone will automaticly go in the download mode and it flashes.
tomi001 said:
I use lg mobile support tool. I connect the phone with the lg software mode. Then i click on the top update recovery. The software downloads and i just wait. When the download finishes the phone will automaticly go in the download mode and it flashes.
Click to expand...
Click to collapse
that's the thing tho the software will download the latest version of android and flash it...but I was downgrading my phone to 4.1.2
I tried this app and in the driver portion of it I selected ATT but there is no E980 driver shown in the menu. I suppose because I already have the driver installed? Either way, this doesn't work for me. It just keeps telling me I have the latest software and when I try to do the upgrade repair it tells me there is nothing to upgrade/fix. I was going to use this app to go back to pure stock because I am now getting the "your phone is not registered yet" error. From browsing the forums I came across one that said you get this error when you flash a non standard Rom to your phone.
I used Lg Flash Tools to flash the 10P update for my phone, E980, so I don't think that's the problem. It is the correct file. I hope anyway.
Hey guys I'm kinda new to Android I've had a chappy phone and now an LG g pad after attempting root about a dozen times I finally managed to get it root now I am trying to get TWRP to backup the tablet and change the boot animation later but every time I tried on my pc it would fail so I installed flashify and tried with that I then I got a boot error saying security issues. The tablet stills boots but I believe the problem is the locked boot loader. Thanks for any help offered.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Look at this thread where some options for flashing TWRP are discussed: http://forum.xda-developers.com/lg-g-pad-83/help/recovery-mode-t2880087
Okay thanks ill check it out
Btw i think my boot loader is locked will this affect it?
Thanks
rooing problems
Joshhi said:
Btw i think my boot loader is locked will this affect it?
Click to expand...
Click to collapse
Have you installed root checker or another program to confirm that you do, in fact, have root? Start with that.
If you haven't installed a superuser app to handle permissions, I'd do that as well before trying to install TWRP.
I'll admit I had troubles installing TWRP as well, when looking at the forums, make sure you're downloading the version for your EXACT version of android and firmware, and following the instructions for the right version as well. Good luck!
yojimboj said:
Have you installed root checker or another program to confirm that you do, in fact, have root? Start with that.
If you haven't installed a superuser app to handle permissions, I'd do that as well before trying to install TWRP.
I'll admit I had troubles installing TWRP as well, when looking at the forums, make sure you're downloading the version for your EXACT version of android and firmware, and following the instructions for the right version as well. Good luck!
Click to expand...
Click to collapse
I got it flashed yesterday forgot to post that so i tried to change the boot animation and soft bricked it luckily i backed up
Joshhi said:
I got it flashed yesterday forgot to post that so i tried to change the boot animation and soft bricked it luckily i backed up
Click to expand...
Click to collapse
Will be good if you share how you doit, becouse i have a same problem. Tnx
adler123 said:
Will be good if you share how you doit, becouse i have a same problem. Tnx
Click to expand...
Click to collapse
Do what? Unbricked it or flashed twrp?
Joshhi said:
Do what? Unbricked it or flashed twrp?
Click to expand...
Click to collapse
flashed twrp to v50020d
atomicblue said:
flashed twrp to v50020d
Click to expand...
Click to collapse
I believe it was this
Further in the thread they tell you that you have to change the command from v500-20a to d
http://forum.xda-developers.com/showthread.php?t=2698267
I also think youll have to flash the latest version of twrp from a zip manually
New to the forums and everything having to do with rooting and what not, but I may have hard or soft bricked my galaxy s6 yesterday. I searched for hours to find someone with my particular problem and found nothing so I was hoping someone could help me on here. I had successfully rooted my phone and tried to flash a custom rom into the device and I guess it failed and now I can't get out of Odin or download mode. I tried to do the recovery thing where you hold the power, home, vol down then up thing without success. What it does is, it'll reboot, show the Galaxy s6 splash screen for a split second and go right back into download mode. It's android 5.1.1 and I tried downgrading and I get a fail each time. Even tried 5.1.1 firmware also with no success. If anyone can help me with this, I would be so thankful for it since I had to buy an iPhone 4s today lol.
Vapen_Clouds said:
New to the forums and everything having to do with rooting and what not, but I may have hard or soft bricked my galaxy s6 yesterday. I searched for hours to find someone with my particular problem and found nothing so I was hoping someone could help me on here. I had successfully rooted my phone and tried to flash a custom rom into the device and I guess it failed and now I can't get out of Odin or download mode. I tried to do the recovery thing where you hold the power, home, vol down then up thing without success. What it does is, it'll reboot, show the Galaxy s6 splash screen for a split second and go right back into download mode. It's android 5.1.1 and I tried downgrading and I get a fail each time. Even tried 5.1.1 firmware also with no success. If anyone can help me with this, I would be so thankful for it since I had to buy an iPhone 4s today lol.
Click to expand...
Click to collapse
I don't have much experience with device yet, as I have only rooted 5.0.2. With so little available and only TW, I have not made the leap. Hopefully, someone will be able to help you out.
If you have upgraded to 5.1.1, there is no going back. I would think you should be able to flash 5.1.1 stock again. How does this fail? Are you using Odin 3.10.6? Use your original USB cable and put the 5.1.1 tar in the same directory as odin.
todivefor said:
I don't have much experience with device yet, as I have only rooted 5.0.2. With so little available and only TW, I have not made the leap. Hopefully, someone will be able to help you out.
If you have upgraded to 5.1.1, there is no going back. I would think you should be able to flash 5.1.1 stock again. How does this fail? Are you using Odin 3.10.6? Use your original USB cable and put the 5.1.1 tar in the same directory as odin.
Click to expand...
Click to collapse
I'll check all of the above and make sure. But when I flash it fails after nand write.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is what I get when trying to flash 5.1.1
Vapen_Clouds said:
View attachment 3411267This is what I get when trying to flash 5.1.1
Click to expand...
Click to collapse
try flashing it in the BL... im not sure, but i never flashed anything in the AP
You have to use Odin 3.10.6 with 5.1.1. It looks like you are using an older version of Odin. Also, make sure you are opening Odin as an administrator.
Sent from my iPad using Tapatalk HD
Error: CrossDL d802 to ls980 SW
build.prop need urgent help from ls980 D802 instead of written, so I'm glad they do not get how software helps arkadşlar düzet I knew it ..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
taksi02 said:
Error: CrossDL d802 to ls980 SW
build.prop need urgent help from ls980 D802 instead of written, so I'm glad they do not get how software helps arkadşlar düzet I knew it ..
Click to expand...
Click to collapse
Is there no one to help
your phone is originally an LS980 (sprint) converted into d802 , u surely flashed a wronge files but
i think u need to shortcut the 2 capacitors
just remove the buttons connector ,then that metalic plat that its glued in just to get access tothe ic chip and motherboard , of course to do this u need to takr off the baterry and all connectors, once u takr off yhe buttons reconnect every connwctor except the one of buttons and baterry
Thrn connect the the phone to the pc by using a usb (without baterry) then u need a liyyle screw driver or a wire to short the capacitor c5000 and c5004, keep trying till u heard thr pc detect new device named qhusb
Great , for that you need to download srk tool 2.1 just google it
Then selectfix utility then unbrick qhusb and select the correct drive
It will flash : haf, boot , aboot
Thats good for now ur download mode is back to life
Then for ls980 u need to install stock tot file (ls890zv7.tot) flash it with lg flash tool use manual mode u need a dll file (lgls980_20130904_lgflashv151.dll) download it on google... i ll send you links later hiw to do this,im using my phone
Once finished , ur phone is back to life but no signal
Easy ,just need to root. Then install twrp recovery
After that u need to install via recovery mode the (ls980stockuniversal to d802.zip)
And u re phone is getting signal and being fixed
edit: here the tutorial links that helps ya how to do everything
1- to get your phone alive ( to be detected as qusb_bulk)
http://forum.xda-developers.com/lg-g...brick-t2904404
2- this to fix the qusb issue & download mode back to life
https://www.youtube.com/watch?v=ERZvlJIC9dE
3- to install the stock tot rom , Root , then install twrp recovery mode , & then full unlock you cell phone
https://www.youtube.com/watch?v=FGQ2aGlumWs
http://forum.xda-developers.com/spri...m-att-t3188248
Hi Folks,i have this problem.
Can someone help please ?
aSpirit81 said:
Hi Folks,i have this problem.
Can someone help please ?
Click to expand...
Click to collapse
you need to read about cross dll , you need to edit TOT file to flash Phone
Yes,i read that,but many people complain on other errors after that..bin file erorr for example....
How to succesfully edit tot file ? Ls 980 got 5 d802 got 4 caracters...
Sent from my SM-G900F using Tapatalk
Hey i just bought an lg g4. And it's something weird about it. Its an h815 version. The imei, the serie and the numbers are the same as the box, nothing weird. BUT the phone is alredy rooted. From fabric? Its rare. But thats not the problem. The problem is it has 5.1 and i want the update to 6. I checked ota and nothing. So i want to make an update from lg bridge from pc. But ITS ROOTED and i read it can make troubles. So i unrooted the phone with supersu and then i uninstalled it. I download rootchecker and the app say the phone is not root anymore. But SuperSu app still appearing in the system apps list. I try to make theorys. But nothing makes sense. I dont wanna ask if its weird because it is. The question is if i could install the update without risks.
Extra information: when i open the supersu app it says that the binaries need an update but couldn't download it.
If its usefull i upload a screenshot of the software info
Sorry for my english im not a native speaker
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
facuast said:
Hey i just bought an lg g4. And it's something weird about it. Its an h815 version. The imei, the serie and the numbers are the same as the box, nothing weird. BUT the phone is alredy rooted. From fabric? Its rare. But thats not the problem. The problem is it has 5.1 and i want the update to 6. I checked ota and nothing. So i want to make an update from lg bridge from pc. But ITS ROOTED and i read it can make troubles. So i unrooted the phone with supersu and then i uninstalled it. I download rootchecker and the app say the phone is not root anymore. But SuperSu app still appearing in the system apps list. I try to make theorys. But nothing makes sense. I dont wanna ask if its weird because it is. The question is if i could install the update without risks.
Extra information: when i open the supersu app it says that the binaries need an update but couldn't download it.
If its usefull i upload a screenshot of the software info
Sorry for my english im not a native speaker
Click to expand...
Click to collapse
easy just flash using LGUP program and using your phones KDZ. chossing refurbished will wipe clean your phone. check wich kdz you need and thats it.
raptorddd said:
easy just flash using LGUP program and using your phones KDZ. chossing refurbished will wipe clean your phone. check wich kdz you need and thats it.
Click to expand...
Click to collapse
Hey thanks but it doesnt sound easy to me. Im a noob in all of this. Do you know some thread where everything is explained?
facuast said:
Hey thanks but it doesnt sound easy to me. Im a noob in all of this. Do you know some thread where everything is explained?
Click to expand...
Click to collapse
it is once you know. its pretty safe to do.
first you must have the LG drivers i think in link of LGUP they have it.
download LGUP install in computer
find out wich variant you have and download the corresponding KDZ. that you need to find out.
KDZ's should be there in LGUP link where it says OTHER GREAT THREADS TO HELP YOU storagecow has KDZ files
just read each step carefully.
http://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803