Develop Bugs

[Q] Need Help Im stuck my Ascend P6 fail after try install TWRP

Hi everybody,
I was trying to install a version of Android 4.4 in my new Ascend P6 but all that I tried to do fail, now I try to install TWRP following this post:
http://forum.xda-developers.com/showthread.php?t=2709607
when I tried to INTALL TWRP JELLYBEAN RECOVERY it show the next message:
FAILEDremote partition 'recovery' not support flash)
Ohhh a problem but I made a mistake because I tried all the options and when try the option
INSTALL OMNI KITKAT BOOT.IMG it leave and install sucesfull and my phone don't start only show the first screen and reboot again and again I tried to enter to recovery mode and it leave me but when I tried to install OMNI Rom through this part the phone show this message:
error invalid ota package missing scatter
I don't know what to do please help me I'm worry because now the battery is out and when I tried to charge it, it only reboot and reboot again and again and now don't leave me enter to recovery mode.
Thanks.

Steps to-do
Hey,
you might find a solution here. What I would first try is to go into Fastboot mode. Then I would flash the stock recovery ( Jelly Bean[4.2] or Kit Kat[4.4] ). Afterwards i would download the firmware you want, put the update.app in your dload folder on your sdcard and flash it over stock recovery.
So 1. step:
Entering Fastboot mode with the help of the buttons on your phone
Press and hold VOL - and POWER button and your phone will enter fastboot mode
Click to expand...
Click to collapse
2. step:
What is stock recovery IMG ?
Depending on what firmware you want to install, Jelly Bean or KitKat, you have to install the correct stock recovery.
You can find a complete guide here
Download links for the images:
Here is the link for the JB stock recovery IMG (B118) and
Here is the link for the KK stock recovery IMG
Click to expand...
Click to collapse
3. step:
Download links for firmware
Android 4.2 Jelly Bean B112
Android 4.2 Jelly Bean B125
Android 4.2 Jelly Bean B132
Android 4.4 KitKat B506
Android 4.4 KitKat B507
Android 4.4 KitKat B510
Android 4.4 KitKat B511
Android 4.4 KitKat B512
Android 4.4 KitKat B513
Click to expand...
Click to collapse
4. step:
Preparing the firmware for flashing
Unzip you downloaded firmware and put the UPDATE.APP file into the dload folder of your sdcard. If you don´t have a dload folder you should create one.
Click to expand...
Click to collapse
5. step:
Flashing the firmware
Press the POWER, VOL + and VOL- Button simultaneously and hold them until you see something like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then everything should install and your firmware is flashed on your phone.
Click to expand...
Click to collapse
I hope this helps, if not you can ask .

Hi, also make sure your bootloader is unlocked you could also use that tool to do it, but rather look near the top of that linked post and download his newer software

stuck at MI_RECOVERY 2.0.1

please any one give me a solution how to get out of this problem..
i have redmi 1s , which is stuck at MI-Recovery 2.0.1
when i power on phone, its allways getting redirected to this recovery.. i havent ROOTED yet. the phone is not going to any further screen..
all this happened when i tried to install update.. now my phone is not at all detecting in the system also !
i have STABLE ROM which i downloaded from MI website, i renamed it and kept in MicroSD card as update.zip
but when i try to install it from MI-Recovery its saying update.zip not found.. please help me ..
i wish i wouldnt have downloded this update file:crying:

Relax, it's easy to recover your phone
Step 1:
a) Download & Install MiPhone flash tool from:
http://bigota.d.miui.com/tools/MiPhone2015731.exe
b)Download factory image to restore your device:
For MIUI 5 latest stable download : http://bigota.d.miui.com/JHCMIBL56.0/armani_global_images_JHCMIBL56.0_4.3_in_f29358d132.tgz
For MIUI 6 latest stable download: http://bigota.d.miui.com/V6.7.1.0.KHCMICH/armani_global_images_V6.7.1.0.KHCMICH_20150723.0000.6_4.4_global_3155609c91.tgz
c) Extract the archive into an easily accessible location
Step 2:
a) Open MiPhone app & click browse to select the folder where you extracted the rom
b) If your phone is in recovery mode take out it's battery for a second and put it back
c) Now start your phone in fastboot mode by pressing volume down and the power button simultaneously
d) Connect the phone to your pc and let it alone for 1 minute to allow windows to install its drivers
e) In MiPhone app click refresh and you should see a device appearing
f) Click Flash and don't touch your pc or phone until the job is done.
Further info / biography:
http://en.miui.com/a-234.html

Thank you very much
seth66 said:
Relax, it's easy to recover your phone
Step 1:
a) Download & Install MiPhone flash tool from:
http://bigota.d.miui.com/tools/MiPhone2015731.exe
b)Download factory image to restore your device:
For MIUI 5 latest stable download : http://bigota.d.miui.com/JHCMIBL56.0/armani_global_images_JHCMIBL56.0_4.3_in_f29358d132.tgz
For MIUI 6 latest stable download: http://bigota.d.miui.com/V6.7.1.0.KHCMICH/armani_global_images_V6.7.1.0.KHCMICH_20150723.0000.6_4.4_global_3155609c91.tgz
c) Extract the archive into an easily accessible location
Step 2:
a) Open MiPhone app & click browse to select the folder where you extracted the rom
b) If your phone is in recovery mode take out it's battery for a second and put it back
c) Now start your phone in fastboot mode by pressing volume down and the power button simultaneously
d) Connect the phone to your pc and let it alone for 1 minute to allow windows to install its drivers
e) In MiPhone app click refresh and you should see a device appearing
f) Click Flash and don't touch your pc or phone until the job is done.
Further info / biography:
http://en.miui.com/a-234.html
Click to expand...
Click to collapse
THank you very much bro, you have helped me a lot , i didnt see your reply till yesterday night.. i have flashed in the process which u said..
now its working perfectly ..
how do i know what is my MIUI version ? i some where saw its miui7 .. does it mean i am in miui7 ? my previous one was miui6 .. how can i know what is my version of miui ..?

SOLVED
oh its ok .. problem SOLVED :: :highfive::victory::fingers-crossed:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
finally i am in MIUI 7

Yeh Dude Its working fine for me........... Many Many thanks for this....
SAGAR SAVKAR

Lol I once had this problem

[Update] Twrp 2.8.7.3 + Theme Marshmallow

Hello friends, I've been here enjoying my dear s3 i9300 with Marshmallow, so I thought why not a TWRP themed with the ROM version ?!
then here is a TWRP themed with marshmallow, changes will come when I have time.
Installation instructions
has installed TWRP already, download the file put in the root of your device, open the recovery (TWRP) and flash the downloaded file, ready!
Video Demo
Problems view video?Link :
https://youtu.be/o5IqWBt11vU
Download
Rate This Thread :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

may i know which twrp version is this?

mahe. said:
may i know which twrp version is this?
Click to expand...
Click to collapse
from the video it seems its 2.8.6.1 build

Scorpionea said:
from the video it seems its 2.8.6.1 build
Click to expand...
Click to collapse
Yes its 2.8.6.1

How can I remove this theme? Installing the regular TWRP version don't work. I also tried flashing CWM Recovery and then TWRP again, also no success.

TWRP. advance/reload teme .sorry for my English
And delete zip the folder TWRP

Thanks for answering! =)
When I click "advanced" in TWRP this menu is empty.
And what do you mean with delete zip folder?

SgtChrischi said:
Thanks for answering! =)
When I click "advanced" in TWRP this menu is empty.
And what do you mean with delete zip folder?
Click to expand...
Click to collapse
TWRP 2873 /ADVANCED/RELOAD THEME.
sdcard/TWRP/theme - ui.zip
if helped _push button

Like I said, the advanced menu ist empty

SgtChrischi said:
Like I said, the advanced menu ist empty
Click to expand...
Click to collapse
It's simple

Look... This is what my advanced menu looks like

SgtChrischi said:
Look... This is what my advanced menu looks like
Click to expand...
Click to collapse
Try install TWRP 2.8.7.3

I already tried that, with exactly the same result.

how to remove this theme? i tried to update to latest version and it crash on power off or reboot -.-''

I got it. I flashed CWM Recovery via flashify app, rebooted into recovery, rebooted into system and then newest flashed TWRP recovery via flashify.

SgtChrischi said:
I got it. I flashed CWM Recovery via flashify app, rebooted into recovery, rebooted into system and then newest flashed TWRP recovery via flashify.
Click to expand...
Click to collapse
for me it doesn't work...and whit the newest twrp recovery my phone crash when i tap to power off or reboot

Vix_Sk said:
for me it doesn't work...and whit the newest twrp recovery my phone crash when i tap to power off or reboot
Click to expand...
Click to collapse
I'm sorry, then I can't really help you to remove the theme. But to fix this crash issue u have to flash this marshmallow theme again. :/

New Update January 14 ,2016
Hello friends, I've been here enjoying my dear s3 i9300 with Marshmallow, so I thought why not a TWRP themed with the ROM version ?!
then here is a TWRP themed with marshmallow, changes will come when I have time.
Installation instructions
has installed TWRP already, download the file put in the root of your device, open the recovery (TWRP) and flash the downloaded file, ready!
Video Demo
Problems view video?Link :
https://youtu.be/o5IqWBt11vU
Download
Rate This Thread :

don't install it..is a hard work to disinstall it..stay to 2.8.7.3 original -.-''

Update for 2.8.7.3
Vix_Sk said:
don't install it..is a hard work to disinstall it..stay to 2.8.7.3 original -.-''
Click to expand...
Click to collapse
this new version already and 2.8.7.3 if you want to use without the theme and only download here:
https://twrp.me/devices/samsunggalaxys3internationalexynos.html.

CUBOT S550 5,5 HD MT6735 1,3Ghz 2gb/16gb fingerprint 3000mAh

Tomorrow i will receive this new Cubot series with fingerprint and good specs.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Official Page:
http://www.cubot.net/Index.php/mobile/view/id/263.html

Reserved for review and modding

Cubot claim that it has a 3000mAh battery.
Battery mAh measured to 2795 here http://peecee.dk/uploads/012016/20160123_204834.jpg
Geekbench 3 battery test: http://browser.primatelabs.com/battery3/197467 (09:35:40 / 3589)

thanks S7yler , not bad, also battery test seems to be very good!
I wait if from EFOX, and i hope to have mine today or tomorrow!

Just Arrived.. .white color in my sample!
first challenge was to create TWRP .. successfull!
http://www.needrom.com/download/twrp-2-8-7-3-material-play-megthebest/
Archive contain Boot Unlocked and TWRP Material Play ported by me!
Tested successfully with V06 January 2016 rom.
1- Download and Install correctly Mediatek Preloader drivers
( Take care on Windows 8.1/10 drivers, you need to disable driver signature before install
https://www.youtube.com/watch?v=50pD0mONm44
http://laurentiumihet.ro/technology...-for-32-64-bit-drivers-installation-tutorial/
https://thebroodle.com/microsoft/windows/install-mediatek-mt65xx-usb-vcom-drivers-windows-8-8-1/
2- enter Engineering Mode MTK with Dialer code *#*#3646633#*#*, go into log and debugging, tap on user2root and tap on ROOT, shut down smartphone.
3- With flashtool load MT6735_Android_Scatter-Play.txt
4- Select download and connect smartphone to pc (smartphone must be powered off)… in few seconds will start the process and the new TWRP will be flashed.
3.1- To restore original stock recovery, you need load ad point 3 the file MT6735_Android_Scatter.txt
P.P.S to enter in the recovery, power off the smartphone, push VOL + and Power at the same time, you will see three words with VOL + you move selection, with VOL – you must select Recovery
To have root flash with TWRP the archive supersu.zip found here: https://download.chainfire.eu/696/supersu/

Unboxing & Review (Italian language) :

any custom roms for that phone ?

megthebest said:
Just Arrived.. .white color in my sample!
first challenge was to create TWRP .. successfull!
Archive contain Boot Unlocked and TWRP Material Play ported by me!
Tested successfully with V06 January 2016 rom.
Click to expand...
Click to collapse
This is great work. Have you got a version of this that works with the latest firmware? I upgraded my firmware to the June v10 firmware and when I put this version on it just boot loops the phone.
Thanks.

So no chance of an updated TWRP then megthebest?

I updated the TWRP myself and put it on needrom, for anyone who wants to use TWRP with the latest official ROM. I tested it on my phone and it works I used it to root the phone and install xposed framework.
All credit to megthebest, it is his work.
http://www.needrom.com/download/twrp-2-8-7-3-material-play-megthebest-3/

Thanks Famineuk! Can I update to the new version directly from twrp recovery or do I have to use the flashtool again?

I did it using the flash tool. I never tried it directly through TWRP. I think you could try it then if it didn't work you would still be able to flash it through the flash tool.

Famineuk said:
This is great work. Have you got a version of this that works with the latest firmware? I upgraded my firmware to the June v10 firmware and when I put this version on it just boot loops the phone.
Thanks.
Click to expand...
Click to collapse
Where did you get the v10 ?
i got v9 OTA, but no v10
have you used the one from needrom ? i see no other source.

Root is possible with KingoRoot (NOT Kingroot)

johnfdoe said:
Where did you get the v10 ?
i got v9 OTA, but no v10
have you used the one from needrom ? i see no other source.
Click to expand...
Click to collapse
This is a link to version 10
http://www.needrom.com/download/cubot-s550/

Will an update using the flash tool erase the internal memory of my phone(titanium backup, photos, etc)? Can I update to V10 using TWRP recovery or do I have to use the flash tool again?

baggos12 said:
Will an update using the flash tool erase the internal memory of my phone(titanium backup, photos, etc)? Can I update to V10 using TWRP recovery or do I have to use the flash tool again?
Click to expand...
Click to collapse
Only Flashtool to upgrade.
You may try to maintain Data if in flashtool you will deselect Userdata partition before start flashing (and Recovery partition if you want to maintain TWRP).
You loose root and it will be not guaranteed that with new v10 rom TWRP will work again (possible change in kernel)

megthebest said:
Only Flashtool to upgrade.
You may try to maintain Data if in flashtool you will deselect Userdata partition before start flashing (and Recovery partition if you want to maintain TWRP).
You loose root and it will be not guaranteed that with new v10 rom TWRP will work again (possible change in kernel)
Click to expand...
Click to collapse
you have twrp for s550

Flash Galaxy Young GT-S5360 without Odin and PC or Backup Restore

Oh hello fella,
Iam Aziu Zui I new here Junior Newbie ? that's okay
and this my frist Thread
So I was Mod a Firmware Stock ROM Odex DXLL1 to Flashable zip with Kitchen Cygwin . so this easy way for you to Restore back to Odex Galaxy Young GT-S5360 DXLL1 when you Stuck at Bootloop if fail MOD your HH .
You can use this ROM if :
1. You stiill can access to Recovery Mode
2. Still Normal to instal Flashable zip in Recovery Mode
If your Gyoung still Gingerbread system version . I Think this will work Finely on your Device
Frist Download this Material :
1. CusStock Odex DXLL1 Flashable zip
2. CWM for Galaxy Young GT-S5360 [if you need]
Instal like other Costom ROM , if you dont know you can follow below instruction :
1. After you download the ROM and CWM put the file out SDCard Folder.
2. Turn off your HH, go into Recovery Mode. HH own way when it is off, press and hold Volume UP (+) + Home + Power together. It will appear as shown below. Select aplly Update From SDcard and select CWM.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note: Touch Screen is not active, use Vol Up (Up), Vol Down (Down), Home (Select / OK), Power (Back / Return)
3. Once you get into CWM then the display will change as shown below. Select Wipe Data / Factory Reset and Wipe Cache Partition . then select Install Zip From SD.
4. Select Choose Zip From SD. Find the ROM file that has been at Download earlier. Then select the file, wait until the installation process Success.
5. If you are finished instal and success then Reboot it
Well Procces finished , Rom you back to Odex and the display becomes as usual. if you have trouble, you can contact me or you can Reply on this Thread. Thank you for visiting my Thread
Excellence This Cus Stock ROM :
1. ROM Odex As first purchase
2. Fast Boot ROM has the advantage
3. Applications are rarely in use As Talk, Socila Hub, and Chat On've cleaned
4. Internal who used only 25 MB which means it is still very relieved to install many applications
5. HH already in Rooted you dont need to rooting that again
6. IMEI is still intact so that there are no obstacles in the installation BBM
7. I Didn't find any bug of this ROM when i used this
So why you not direct Download this CusStock ROM and tried to install it. If you bootloop HH can immediately install this ROM so it does not require a PC and Odin. If the above does not match your Gyoung, you can use the Reinstall Gyoung1 way via PC and Odin.
You can also find this Article with Indonesian Language in my blog FullApkZ
That's it . See yea
Watch Tutorial Video :
Update : 22-05-2022
Log : Fix Broken Url

aziu zui said:
Oh hello fella,
Iam Aziu Zui I new here Junior Newbie ? that's okay
and this my frist Thread
You can also find this Article with Indonesian Language in my blog here
That's it . See yea
Click to expand...
Click to collapse
Nice Frist Post , Look Handsome and Brave :v

looks good, thanks.

kindly share the rom

Whoa, are people still using this phone?
I have one but the power button is getting weird.

Link invalid, please reupload link
Please reupload link

Link not working

file not found, i will try searching on the web