Related
Seems the TP2 also has a "grip of death" of sorts. Basically if you hit the Volume Buttons on the side of the devise and touch the screen, it automatically activates the Screen align util and until you complete the Screen align to the devices satisfaction, You are stuck there.
Basically this translates to any time you use the Volume Buttons while holding the phone to your face, It activates the Screen Align Util. (At least that is what happens to me about 10 times a day)
Does anyone know of a way to deactivate this "Feature/Major Annoyance"?
Thanks
mine does not do this. i suspect something is wrong with your device.
This also does not happen with my phone, just tested it out. Even called myself at work. Are you using a cooked ROM or stock? I am using stock ROM from AT&T
Try again. Hit both Volume Buttons (Simultaneously) on the side of the phone and tap the screen, It will start up the align screen until every time. I have verified that this VZN and Sprint TP2`s. It may be a CDMA thing but this feature is designed into the phone (And it sucks!).
Anyone know of a way to disable this?
mine does that from time to time, but I never figured out what causes it, but, you are right it is ANNOYING when it happens.
Cooked rom, if it makes any difference.
Hi all,
Confirmed on UK TP2 - stock WM6.5 ROM, no special apps etc installed. Had to soft reset to get out from a mixed screen align/text message app screen.
No looping align screen after reset - but annoying. Best suggestion (without being sarcastic!) - don't press both volume buttons at once, seems to be a way into a "fix the problem" mode for those with grossly un-aligned screens. How else could you get into align screen to fix the problem? ... aka "feature not a bug".
adam.
both volum buttons?
under what scenario are you hitting both volum buttons at the same time, with enough force to depress them, and touching the screen? I tried doing this on purpose and its almost impossible to do with intention much less on accident. you would have to be gripping your phone with massive, angry, force. maybe the fix is to stop talking to whomever it is that is pissing you off.
in anycase, i still could not get this replicated on the tmobile tp2. of course i am using the fastest and most stable rom provided for this phone: stock wm 6.1 with tf3d. so maybe its a feature of 6.5.x and some rendition of sense 2.x
Hold the Phone in your left hand. In my case my Thumb naturally rests on the Volume Buttons. My Thumb covers both Volume buttons. Now if I get a call and the phone against my Face and I attempt to adjust the volume with my Thumb (By rocking my Thumb up or down), Sometimes I manage to accidentally hit both. If that happens, The Screen align will start up every time because the screen is already touching my face.
I have talked with many other TP2 owners that have this same problems however they did not know what was causing it. All they knew was the Screen align kept starting up randomly.
Back to.. Is it possible to disable this? Maybe even assign a different key combination to start the screen align util such as Vol Down and endcall or something. It is too easy to accidentally press both volume buttons if you are on a call. If you do that while the phone is touching your face, the screen align will start and the phone is now locked until you get out the stylus and go through the realign.
Everytime I boot my phone up, it works fine up until when the screen goes into sleep mode. Once it goes into sleep mode I cannot turn the screen back on, it stays black. The keyboard, end and answer key lights show up when I press the power button but the screen just stays black no matter what button I press.
I end up having to either take the battery out or using the stick to press the reset button on the side in order to get the phone to where I can see the screen again. I have adjusted the settings to where the screen doesnt go into sleep mode and the screen just stays on but that drains my battery. I want to be able to have my screen go off so I can save power but if it goes off it wont come on again until I reboot.
I have done a hard reset. This problem started happening to me when I started using the Energy Rom but I've even flashed different Roms and the problem still exist.
Somebody please tell me what's wrong! I need help! This is a big annoying problem to have. Thanks.
is this problem occurring when you slide the keyboard out?
i had the t-mobile touch pro2 with this problem.
the screen would die when the keyboard was out and not come back.
if this is the case, what i did was...
well. obviously not open the keyboard fully.
but if i accidentally had.
instead of pulling out the battery, i waited...
till the screen 'naturally' went to sleep.
than i would pull out the stylus or press power button
and the screen would come on.
sh4d0w86.
sh4d0w86 said:
is this problem occurring when you slide the keyboard out?
i had the t-mobile touch pro2 with this problem.
the screen would die when the keyboard was out and not come back.
if this is the case, what i did was...
well. obviously not open the keyboard fully.
but if i accidentally had.
instead of pulling out the battery, i waited...
till the screen 'naturally' went to sleep.
than i would pull out the stylus or press power button
and the screen would come on.
sh4d0w86.
Click to expand...
Click to collapse
Yes the problem still exist even when I slide the keyboard out. Once the screen goes off, that's it....pressing the power button to get it out of sleep mode, sliding the keyboard, I press all buttons and nothing works. The only thing that "works" to get the screen back on is removing the battery or using the stylus to press the reset button.
When sliding the keyboard out the keys light up but the screen doesn't come on, also pressing the power button lights up the end and answer keys without the screen coming on.
themasterhook2000 said:
Yes the problem still exist even when I slide the keyboard out. Once the screen goes off, that's it....pressing the power button to get it out of sleep mode, sliding the keyboard, I press all buttons and nothing works. The only thing that "works" to get the screen back on is removing the battery or using the stylus to press the reset button.
When sliding the keyboard out the keys light up but the screen doesn't come on, also pressing the power button lights up the end and answer keys without the screen coming on.
Click to expand...
Click to collapse
so. whenever the screen goes out, period, you cant get it back?
or the screen goes out and cant get it back once you slide the keyboard out?
if it is only when sliding out the keyboard...
try not opening the keyboard fully on the right side.
on my rhodium, after that point, the screen goes out.
sh4d0w86.
sh4d0w86 said:
so. whenever the screen goes out, period, you cant get it back?
or the screen goes out and cant get it back once you slide the keyboard out?
if it is only when sliding out the keyboard...
try not opening the keyboard fully on the right side.
on my rhodium, after that point, the screen goes out.
sh4d0w86.
Click to expand...
Click to collapse
Yes, period. Also, you know when you put your face to the phone during a call and the screen goes off so your face wont press anything on the screen? It doesn't come back on from that either once I end the phone call, it just stays black. I'm assuming you don't have any other suggestions. This Sucks
themasterhook2000 said:
Yes, period. Also, you know when you put your face to the phone during a call and the screen goes off so your face wont press anything on the screen? It doesn't come back on from that either once I end the phone call, it just stays black. I'm assuming you don't have any other suggestions. This Sucks
Click to expand...
Click to collapse
: / sorry. i am unsure.
maybe you have a lose connection?
sh4d0w86.
This has to be a software issue but I don't know where to start. I'm surprised nobody else has encountered this problem. I've grown frustrated of this issue because I don't understand why it's doing this. I have had the phone for almost 6 months only dropping it once 4 months ago and it wasn't a strong damaging drop that would affect anything inside. I guess I'll just have to go last resort and call warranty to swap the phone out. Thanks for the help.
Same problem
themasterhook2000 said:
This has to be a software issue but I don't know where to start. I'm surprised nobody else has encountered this problem. I've grown frustrated of this issue because I don't understand why it's doing this. I have had the phone for almost 6 months only dropping it once 4 months ago and it wasn't a strong damaging drop that would affect anything inside. I guess I'll just have to go last resort and call warranty to swap the phone out. Thanks for the help.
Click to expand...
Click to collapse
My phone also dos not come back on, when I put it in out the sreen with the power button on top, or when the phone goes to sleep. Nothing can put it back on(opening te keyboard, pulling out the stylis, presing the answer-, windows-, back- and end button). I and up using a music players too keep the phone busy what's makes it operational. Cant really remember when this started happening exactly. My phone is at the moment loaded with a standard ROM. I used too have a custom ROM.
My TP2 does this too, although I only encounter the problem sometimes when someone calls. I answer and put the phone next to my ear, the screen goes black as it should and the phone just dies. I can't hear what the other person is saying and the screen wont turn on anymore. I have to take out the battery to reboot.
set light sensor to manual in settings. You have some bad or fragmented code causing the problem. Pretty common actually, many different reasons, but usually either a bad light or proximity sensor or software issue. Setting the sensor to manual should do it, if not, hard reset and allow the phone to fully set up before touching it, to allow full customization process to complete. Search my posts on SOD (sleep of death) for more information.
Funny this was brought up. Now im worried I just dropped 250.00 and have a new one coming.
Mine started with the ear piece quit working. couldnt hear anything except on speaker.
Anyway I started having the screen issue over a month ago, only way to get it back was soft reset with the stylus. Also when the screen was lit, I couldn't hit the power button to turn the screen off. At times the screen would be on 24/7 and I just dealt with it. The times when it decieded to go to sleep was when I needed the soft reset. Well long story short I forgot my charger one day at work and the battery died. after pressing the power button for hours with no response, moving the screen in all diffrent directions as I pressed the button.It came on once after hrs of messing with it. Well today it died again and I am fed up with it so out came the tools. Once I opened it up I noticed the ribbon that feeds the screen from the mother board was worn and torn. the ribbon slides everytime the keyboard is slid out and it rubs on both sides of the phone. I thought maybe mine was just a fluke and was installed wrong considering the phone being 10 months old but now I read this and see maybe its a common problem. The cheapest I could find the Ribbon was 56.00 so I didnt want to chance it not being the issue.
this is one problem that annoys the hell out of me. occasionally ill have my phone in my pocket and when i pull it out im forced to align the screen. if i dont whip the stylus out (forcing me to use 2 hands) and do it properly it'll just repeat and no other action can be taken until it is complete.
how can i disable this?
the screen is already aligned but im guessing it gets interrupted sometimes when in my pocket thinking it needs an alignment
also while im here. any easy way to stiffen the power/screen button? i reassembled my TP2 the other day and ever since then it's slightly softer. i always bump the button when i'm holding the phone horizontally
It should never, ever go to the align screen unless you're pressing the key combo to enter it... Which I don't even remember what the key combo is for the RHOD. On my RAPH I think I had to hold a volume button and the middle button. I'll try to look it up, but basically there's probably a key combo you're hitting while the phone is in your pocket, that is causing that screen to come up.
Search is magical.
http://forum.xda-developers.com/showthread.php?t=723972
Seems if you hit both volume buttons and tap the screen it pulls it up? Sorry, I can't test this... I completely wiped WinMo off my RHOD .
Just want to know if people have experienced weird problems with their touch screen on their Gnexus, i've had this phone for less than 1 week, and the problem arised twice.
the screen just dont reach to your finger touch, normally you swipe left or right in the home screen, and the pages just moves to the next screen centered, but the screen just stops when ever you let go, and on home screen when you push and hold an icon or widget the bin pops up at top to discard the item, on my phone, just a slight touch and no need to touch and hold will do the same thing. it's just like the screen has gone malfunction randomly with the screen registering a touch. I also think this happed when it is connected to a non samsung charger, but not too sure if i had the charger connected.
to rectify the problem, you need to power down the phone and on.
not too sure if this is a bug, or problem with the display, it's very hard to discribe it, but it's not normal.
thanks
Greeting,
I have a weird issue where occasionally after I unlock my phone, my screen doesn't respond to touches.
The phone works and responds to physical button presses but not touch.
Not sure exactly when it started happening but I've noticed this since last week.
Any idea what might be causing this?
I'm running Android Pie 52.0.A.3.202.
Sydrox said:
Greeting,
I have a weird issue where occasionally after I unlock my phone, my screen doesn't respond to touches.
The phone works and responds to physical button presses but not touch.
Not sure exactly when it started happening but I've noticed this since last week.
Any idea what might be causing this?
I'm running Android Pie 52.0.A.3.202.
Click to expand...
Click to collapse
Please upgrade to the newest firmware.
Sydrox said:
Greeting,
I have a weird issue where occasionally after I unlock my phone, my screen doesn't respond to touches.
The phone works and responds to physical button presses but not touch.
Not sure exactly when it started happening but I've noticed this since last week.
Any idea what might be causing this?
I'm running Android Pie 52.0.A.3.202.
Click to expand...
Click to collapse
Got the same issue on 52.0.A.8.50. Usually opening the app drawer then hitting back solves it - otherwise none of the virtual buttons work.
Searching the web it seems touch screen issues are pretty common on this phone. I'm a bit surprised there isn't more being said here about it. Some experience delayed response, dead areas and no response at all. I have all those issues. Yes I am on the latest firmware. I bought the phone used with a cracked screen. I checked it out and everything seemed fine. I didn't use the phone, just set it aside til replacement screen came. I should have used the phone to thoroughly check it out but didn't want to go through the set up process as I was thinking of B/L unlock and root. New screen came, put it on and seemed to be working fine then screen would be unresponsive. I did factory reset, software update, software repair, went into settings and made sure sure everything was good there, nothing helped. The center of the screen (it's low and a bit off center) is pretty much dead. To open launcher I have to touch and hold near the top of the display. Touch and hold apps is tricky. Usually the app just opens. When I do get it to hold, I can't drag it anywhere. Also, icons in the drop down menu cannot be rearranged or edited. I can swipe up/down, side to no problem. Whenever touch goes dead completely, the home, back and minimize buttons go grey. Tapping the power button gets them back functioning again. . Function test fail. Free draw lets me make a few seconds of scribbles then freezes. The x and rectangle block draw does the same. Tapping power button does nothing to unfreeze either. The color test pass even the block one where you toggle on/off sections of the screen in blocks. It's really weird. First impression would lead me to the screen but it really acts like a software issue. From what I've read so far this phone uses two different display drivers. I not seen anything on how to change that and it would more than likely mean B/L unlock and root, which I'm not against doing. I would just like to know definitively if it's hardware or software. Any input would be greatly appreciated.
Thanks
bobsright said:
Searching the web it seems touch screen issues are pretty common on this phone. I'm a bit surprised there isn't more being said here about it. Some experience delayed response, dead areas and no response at all. I have all those issues. Yes I am on the latest firmware. I bought the phone used with a cracked screen. I checked it out and everything seemed fine. I didn't use the phone, just set it aside til replacement screen came. I should have used the phone to thoroughly check it out but didn't want to go through the set up process as I was thinking of B/L unlock and root. New screen came, put it on and seemed to be working fine then screen would be unresponsive. I did factory reset, software update, software repair, went into settings and made sure sure everything was good there, nothing helped. The center of the screen (it's low and a bit off center) is pretty much dead. To open launcher I have to touch and hold near the top of the display. Touch and hold apps is tricky. Usually the app just opens. When I do get it to hold, I can't drag it anywhere. Also, icons in the drop down menu cannot be rearranged or edited. I can swipe up/down, side to no problem. Whenever touch goes dead completely, the home, back and minimize buttons go grey. Tapping the power button gets them back functioning again. . Function test fail. Free draw lets me make a few seconds of scribbles then freezes. The x and rectangle block draw does the same. Tapping power button does nothing to unfreeze either. The color test pass even the block one where you toggle on/off sections of the screen in blocks. It's really weird. First impression would lead me to the screen but it really acts like a software issue. From what I've read so far this phone uses two different display drivers. I not seen anything on how to change that and it would more than likely mean B/L unlock and root, which I'm not against doing. I would just like to know definitively if it's hardware or software. Any input would be greatly appreciated.
Thanks
Click to expand...
Click to collapse
Maybe the Screen Connector wasn't 100% clean.
Or not only the screen is damaged.
I heard that the touch problems are mostly fixed with PIE. The closed source clearpad touch driver is..... Hoping Q gives us an further updated driver.
You still get sometimes ghost touches on higher workload or if the keyboard app is slow, but if you have dead spots the hardware sounds damaged.