weird problem with touch screen - Samsung Galaxy Nexus

Just want to know if people have experienced weird problems with their touch screen on their Gnexus, i've had this phone for less than 1 week, and the problem arised twice.
the screen just dont reach to your finger touch, normally you swipe left or right in the home screen, and the pages just moves to the next screen centered, but the screen just stops when ever you let go, and on home screen when you push and hold an icon or widget the bin pops up at top to discard the item, on my phone, just a slight touch and no need to touch and hold will do the same thing. it's just like the screen has gone malfunction randomly with the screen registering a touch. I also think this happed when it is connected to a non samsung charger, but not too sure if i had the charger connected.
to rectify the problem, you need to power down the phone and on.
not too sure if this is a bug, or problem with the display, it's very hard to discribe it, but it's not normal.
thanks

Related

[Q] Screen wont turn on after it turns off. ATT Tilt 2

Everytime I boot my phone up, it works fine up until when the screen goes into sleep mode. Once it goes into sleep mode I cannot turn the screen back on, it stays black. The keyboard, end and answer key lights show up when I press the power button but the screen just stays black no matter what button I press.
I end up having to either take the battery out or using the stick to press the reset button on the side in order to get the phone to where I can see the screen again. I have adjusted the settings to where the screen doesnt go into sleep mode and the screen just stays on but that drains my battery. I want to be able to have my screen go off so I can save power but if it goes off it wont come on again until I reboot.
I have done a hard reset. This problem started happening to me when I started using the Energy Rom but I've even flashed different Roms and the problem still exist.
Somebody please tell me what's wrong! I need help! This is a big annoying problem to have. Thanks.
is this problem occurring when you slide the keyboard out?
i had the t-mobile touch pro2 with this problem.
the screen would die when the keyboard was out and not come back.
if this is the case, what i did was...
well. obviously not open the keyboard fully.
but if i accidentally had.
instead of pulling out the battery, i waited...
till the screen 'naturally' went to sleep.
than i would pull out the stylus or press power button
and the screen would come on.
sh4d0w86.
sh4d0w86 said:
is this problem occurring when you slide the keyboard out?
i had the t-mobile touch pro2 with this problem.
the screen would die when the keyboard was out and not come back.
if this is the case, what i did was...
well. obviously not open the keyboard fully.
but if i accidentally had.
instead of pulling out the battery, i waited...
till the screen 'naturally' went to sleep.
than i would pull out the stylus or press power button
and the screen would come on.
sh4d0w86.
Click to expand...
Click to collapse
Yes the problem still exist even when I slide the keyboard out. Once the screen goes off, that's it....pressing the power button to get it out of sleep mode, sliding the keyboard, I press all buttons and nothing works. The only thing that "works" to get the screen back on is removing the battery or using the stylus to press the reset button.
When sliding the keyboard out the keys light up but the screen doesn't come on, also pressing the power button lights up the end and answer keys without the screen coming on.
themasterhook2000 said:
Yes the problem still exist even when I slide the keyboard out. Once the screen goes off, that's it....pressing the power button to get it out of sleep mode, sliding the keyboard, I press all buttons and nothing works. The only thing that "works" to get the screen back on is removing the battery or using the stylus to press the reset button.
When sliding the keyboard out the keys light up but the screen doesn't come on, also pressing the power button lights up the end and answer keys without the screen coming on.
Click to expand...
Click to collapse
so. whenever the screen goes out, period, you cant get it back?
or the screen goes out and cant get it back once you slide the keyboard out?
if it is only when sliding out the keyboard...
try not opening the keyboard fully on the right side.
on my rhodium, after that point, the screen goes out.
sh4d0w86.
sh4d0w86 said:
so. whenever the screen goes out, period, you cant get it back?
or the screen goes out and cant get it back once you slide the keyboard out?
if it is only when sliding out the keyboard...
try not opening the keyboard fully on the right side.
on my rhodium, after that point, the screen goes out.
sh4d0w86.
Click to expand...
Click to collapse
Yes, period. Also, you know when you put your face to the phone during a call and the screen goes off so your face wont press anything on the screen? It doesn't come back on from that either once I end the phone call, it just stays black. I'm assuming you don't have any other suggestions. This Sucks
themasterhook2000 said:
Yes, period. Also, you know when you put your face to the phone during a call and the screen goes off so your face wont press anything on the screen? It doesn't come back on from that either once I end the phone call, it just stays black. I'm assuming you don't have any other suggestions. This Sucks
Click to expand...
Click to collapse
: / sorry. i am unsure.
maybe you have a lose connection?
sh4d0w86.
This has to be a software issue but I don't know where to start. I'm surprised nobody else has encountered this problem. I've grown frustrated of this issue because I don't understand why it's doing this. I have had the phone for almost 6 months only dropping it once 4 months ago and it wasn't a strong damaging drop that would affect anything inside. I guess I'll just have to go last resort and call warranty to swap the phone out. Thanks for the help.
Same problem
themasterhook2000 said:
This has to be a software issue but I don't know where to start. I'm surprised nobody else has encountered this problem. I've grown frustrated of this issue because I don't understand why it's doing this. I have had the phone for almost 6 months only dropping it once 4 months ago and it wasn't a strong damaging drop that would affect anything inside. I guess I'll just have to go last resort and call warranty to swap the phone out. Thanks for the help.
Click to expand...
Click to collapse
My phone also dos not come back on, when I put it in out the sreen with the power button on top, or when the phone goes to sleep. Nothing can put it back on(opening te keyboard, pulling out the stylis, presing the answer-, windows-, back- and end button). I and up using a music players too keep the phone busy what's makes it operational. Cant really remember when this started happening exactly. My phone is at the moment loaded with a standard ROM. I used too have a custom ROM.
My TP2 does this too, although I only encounter the problem sometimes when someone calls. I answer and put the phone next to my ear, the screen goes black as it should and the phone just dies. I can't hear what the other person is saying and the screen wont turn on anymore. I have to take out the battery to reboot.
set light sensor to manual in settings. You have some bad or fragmented code causing the problem. Pretty common actually, many different reasons, but usually either a bad light or proximity sensor or software issue. Setting the sensor to manual should do it, if not, hard reset and allow the phone to fully set up before touching it, to allow full customization process to complete. Search my posts on SOD (sleep of death) for more information.
Funny this was brought up. Now im worried I just dropped 250.00 and have a new one coming.
Mine started with the ear piece quit working. couldnt hear anything except on speaker.
Anyway I started having the screen issue over a month ago, only way to get it back was soft reset with the stylus. Also when the screen was lit, I couldn't hit the power button to turn the screen off. At times the screen would be on 24/7 and I just dealt with it. The times when it decieded to go to sleep was when I needed the soft reset. Well long story short I forgot my charger one day at work and the battery died. after pressing the power button for hours with no response, moving the screen in all diffrent directions as I pressed the button.It came on once after hrs of messing with it. Well today it died again and I am fed up with it so out came the tools. Once I opened it up I noticed the ribbon that feeds the screen from the mother board was worn and torn. the ribbon slides everytime the keyboard is slid out and it rubs on both sides of the phone. I thought maybe mine was just a fluke and was installed wrong considering the phone being 10 months old but now I read this and see maybe its a common problem. The cheapest I could find the Ribbon was 56.00 so I didnt want to chance it not being the issue.

Registers everything as a long touch

Hi!
Something is wrong with the touch on my Xperia S. When I plug in the charger or headphones the phone starts to register every tap as a long touch, but only on the lowest centimeter of the screen plus the back, home and meny buttons.
An example is if I tap the Homebutton the list of previous apps opens up, and if I press an icon in the dock it just wants to move it, just like if you long press on it. This makes the phone pretty much useless as I cant use the lower part of the screen.
Like I said this only happens when I have the charger or headphones connected, otherwise it works just fine.
Anyone knows if there is a solution for this, or should I just return the phone?
"EDIT: It seems like the problem goes away after the charger has been connected for a while"
Just clean your screen and if any screen protector exists replace it. If the problem still exists do a software repair

[GT-I9195] Touchscreen problems

Hey there,
sometimes after using phone for days, touch screen dont respond correctly on some specific placed on screen.
for example if i hold down at one point on the screen screen is thinking i press also like 1cm down and jumps up and down.
i will wait to re-produce the problem and post a screen from touchscreen with debug menu *#0*#
happens at least 3 times for now with multiple firmware, since a restart always is the solution i think its a samsung related software problem in stock rom.
Did you apply any screen protectors? Its a common issue with cheap ones
No, i dont have any. Also the its not always at the same position.

Part of screen not responding to touch

So today while using my Xperia Z5p, a specific part of the screen does not respond anymore to touch. It is exactly at the point the "send" button is sitting on when your keyboard is open in Whatsapp, LINE, WeChat, etc messengers. I tried diagnostics and I can wipe the whole screen clear, so I assume my screen is not dead anywhere.
HOWEVER, if I start a touch on the point I described earlier (beside power button), it does not respond to my touch. I can only start my touch on another point and drag pass it just fine.
Also, it DOES respond on some windows, I've found that it works normally when I pull my notification bar down. However, everywhere else it does not work.
It goes back to normal if I reboot my device, but after some time it occurs again. It has occured 3 times in 9 hours today.
Anyone else with the same issue? It does not respond if my starting point of touch is there, and does nothing even if I drag across the whole screen, so long as I started my touch at the specific point.
Running 32.2.A.0.253

Faulty screen - no wake up from sleep and half screen corrupted

Hello everyone.
A few days ago a strange thing happened to the pixel c: half of then screen is corrupted, sometimes showing weird colors, and sometimes having strange artifacts. If I press firmly in one of the corner, it works fine for a few seconds. I attached a Pic.
Another thing is that once it gets to sleep more, the screen doesn't wake up.
Touch screen and buttons do work, but I can't turn on the screen.
I tried a hard reset but it didn't change anything.
Is there anything else I can try to do? Is opening it up to see for a faulty connection very difficult?
Thanks for any help!!
Any idea?

Categories

Resources