Hello Guys...
my problem is mentioned above!
I got this problem only when using FireTv not when exchanging it for my htpc.
Hardware is
AV Receiver Yamaha RX V2067
and
Samsung D6900 Plasma.
What can be the reason ? I got it often on scene changes in Movies and it is very annoying...
Is it possible that the cable is the problem?! Although it isn´´t a problem on HTPC so far.
Related
11pin samsung MHL connection. Using cyanogenmod 10 if it matters. I'm getting significant delay from whats going on in the phone compared to whats outputted on screen. I'm using some emulator games and a ps3 controller connected over bluetooth, and the lag is sufficient enough to make it hard to play. I'm sure the lag isn't a slow running game or the bluetooth connection because I can play the game with the bluetooth controller on the phone screen fine, but the MHL output is where I'm seeing the lag.
I've tested this on my 1080p computer monitor and it works fine, but on my toshiba 1080p TV, I get the lag there. I have read about other people with similar issues, but have not seen any resolution yet. I'm not sure where I should be looking for a resolution either, should it be something changed on the TV input settings perhaps, maybe something that the android ROM needs to control better, or maybe just bad samsung MHL hardware.
I'm doubting its just slow hdmi connection the TV since I have my game consoles hooked up and they play without issue. Wondering if anyone out there has found a solution to this issue.
Also as a side note, does anyone else notice the phone charges very slowly connected through the MHL usb plug, even if your screen is off, and no mirrored image is being displayed?
Can someone make kernel or tell me how to do this, maybe thru some kind of converter or something like that?
1080p/24Hz is chopy for games so maybe this can be done by software or hardware fix??
There is similar kernel but for One S so I belive this can be done for note 2.
Pls help this is realy big issue for mhl/tv output and i didnt find any solution on web how to make this happen on note 2.
I'm to having same issue.
Choppy with the dock. My GNex works so smoothly compared and it's half the phone although it is rooted.
I'd be very excited to known if a custom kernel can fix this. I've posted something similar already in this thread.
Cheers guys.
Sent from LV-426...
I hope for the fix to, it a shame that this isnt implemented like and option in stock software. One again please devs or anybody help us with this problem :crying:
Going to try to fix this thru vga pc because in my tv manual says I can select resolution myself thru this input (RGB PC only).
Maybe you too can do something with this.
Well i cant post links so this is what I will test with my Note2:
RED Galaxy S3 SIII i9300 i9308 MHL Micro USB 11pin to HDTV HDMI
HDMI Female to Female F/F Coupler Extender Adapter Connector
Gold HDTV HDMI to VGA HD15 3 RCA Adapter Cable 5ft
When tested will report here... still hoping for kernel modification of some kind...
I have a N7100 and a smart dock this has been my experience:
HDMI -> DVI adapter plugged into a Dell U2312HM via DVI (HDCP compliant):
- Stuck at 720x480 resolution no matter what.
- When mouse and external display is connected there is a drop in frame rate. However, if the mouse OR the external display are connected seperately the FPS remains high.
HDMI cable to my 26" Westinghouse 1080P TV (HDCP compliant but constantly has handshaking issues):
- Appears to display at 1080p or at least scaled up 720p though I set my TV in 1:1 and there are no black bars so I suspect 1080p.
- When mouse and external display is connected there is a drop in frame rate. However, if the mouse OR the external display are connected seperately the FPS remains high.
It seems that there is a bug in the code that has to do with when the phone enters that "desktop mode." There also seems to be a bug when using an adapter for some reason as well. The N7100 seems to act completely differently than my PS3. My PS3 connects wonderfully using the same adapter and the same Dell monitor, no handshaking issues. Though my PS3 to get sound out of the TV's speakers I have to mute and then unmute the TV to get sound anytime the HDMI link is closed and then reopened (starting a game for example). While it seems the N7100 behaves oppositely.
Update on my Gold HDTV HDMI to VGA HD15 3 RCA Adapter Cable 5ft combination is not working the device dont check connection thru hdmi rgb input (no signal or notification of connection). So I belive only hdmi input/output works with note 2. Once again pls help us regarding this option to lock device on 720p output thru hdmi.
man i really need this force 720p playback option as well...
Hi All,
I have a AFTV 4K box which has had an update yesterday to 5.0.2.2 to resolve issue with Dolby Digital, however, the problem I'm having seems to not have been resolved, even after factory resetting it after the update. There seems to be an issue with the volume that's outputted from the box in that it's very low. Even with Dolby Digital Plus set to off the volume is low. I have a Samsung smart TV and have the Fire TV connected via HDMI. I do not have any sound system or sound bar connected; just the standard TV speakers. The volume level range when I'm watching cable TV through Virgin Media, or a DVD through my Sony Blu-ray player is set between 8-12, however, with the Fire TV I have to crank it up to 35+ to get the same volume level. I have tried different HDMI cables and different HDMI ports on the TV but the issue still remains. I have this problem across different apps such as Kodi, BBC iPlayer etc. I've hard wired the box directly to my router and have good internet speed (100Mb).
Is anyone else from here having this issue, and do you have any suggestions? The volume issue is really annoying.
Thanks.
Is no one else on this form experiencing this issue? I see there has been a lot of views but no responses. I've contacted Amazon and they've passed on the issue to the engineering team.
For anyone checking this thread, I just had a call from Amazon support who confirmed that this is a known issue and is affecting a number of people. A future software update should resolve this, however, he's still waiting for the engineering team to provide him with an ETA of when this software will be released.
I am having the same issue. Thanks for the update
For those that may be following this thread I ithought I'd let you know that software update 5.0.3 has resolved the low volume issue for me. My box received the update earlier today.
Has anybody experienced any audio delay through the 3.5mm jack (game controller) when playing video with Plex specifically?
This is still an issue with AFTV1 & Plex & Bluetooth speakers / headset and I am wondering if this is now fixed with wifi direct.
I would like to have this information also. I'm still waiting to buy the controller or not.
Hi guys! Ofesad here from Argentina.
First a litte history: I had a Sony XBR55X805E (android tv) until january. Was killed by a electric surge.
Since then I dont have a TV.
So, yesterday I got a TCL 55" C715 QLED. Picture looks nice, however I have been finding problems all around that I cant seem to find a solution.
First, the most important one: NO AUDIO on ARC.
I have a Yamaha RXV-673 (Dolby+ and DTS, no Atmos). The TV "sees" it as an input device. I can see the receiver menus when I select the HDMI 1 on the tv.
I have try'd changing a lot of things and never saw it as a output device. Even changed the hdmi cable and port (in case of mislabeling), no change.
Of course I tested the receiver with another source and it works perfectly, as it always did with the Sony.
Second, the HDMI-CEC doesnt seem to work.
I plugged my PS4 in HDMI2. Enabled HDMI CEC support. Same on the TV.
Turned everything off.
Turned PS4 On using it's joystick. TV stays off.
------
Also tryd turning everything off. Turning TV on. Select Input HDMI2 and the PS4 doesnt turn on.
Both devices used to work PERFECTLY my Sony with the features mentioned.
So, I ask on any advice on this matter.
The new TV seems nice enough but with all this issues it feels quite... "incomplete". Like a "demo" version.
I dont know what to think.
I am really considering returning it unless I can find the solution to this problems.
Thank you for reading and your advices.
Ofesad.
Same problem on tcl 55c735 and apple tv 4k . Cec don’t turn on tv but turn off . Same problem with 50c735 too. Tv bought in France. Try reinstalling on the 50c735 adviced by TCL and do nothing. Worked with my old Samsung TV. I tried other input and and another hdmi cable and don’t work
This is the recommended power up sequence to reduce and solve any handshake issues...
1. Power-off all equipment (At the wall socket).
2. Ensure all Cables, Splitters, Switches, Extenders are connected within the HDMI Distribution Network.
3. Power on all Splitters, Switches, Extenders within HDMI Distribution Network.
4. Power on all displays and set to HDMI input from HDMI Distribution Network (Source device need to be able to contact display to retrieve EDID information)
5. Power on Sources / Players. Ensure that a path is open from source to display for HDCP handshake negotiation by selecting the proper input on HDMI Switches or HDMI switch/splitter combo’s via the remote control (Sources negotiates HDCP Handshake via HDMI Network to displays which is set to HDMI input to respond to handshake).
Some displays will negotiate HDCP handshake / timing better if the source are already powered on and you may need to change points 3,4,5 above to 4,3,5 or 4,5,3 depending on your equipment.