Hello all,
I have the FTV box going directly to my TV via the HDMI cable. I also have the FTV box going to my receiver via optical cable for audio.
I have the same setup for my cable box. There is no connection from TV to receiver.
In the past, with other devices (Roku, WDTV) I would play some content from Netflix or Amazon prime, but would then turn my TV off - leaving me with just audio. I do this at night because I like to listen to something as I go to sleep.
With the FTV, I have noticed as soon as I change to a different content source on my TV, or if I turn off my TV, the audio from the FTV stops. Does anyone know if there is a way to get around this?
Sounds like CEC HDMI communication between the FTV and your TV. When you turn one device off, the device that receives the signal to turn off tells the other device to turn off or go into standby. Maybe there's a setting in the FTV to turn that feature off? Or, you could probably disable it at the TV. Samsung has a different name for it (AnyNet or some such).
jpage101 said:
Hello all,
I have the FTV box going directly to my TV via the HDMI cable. I also have the FTV box going to my receiver via optical cable for audio.
I have the same setup for my cable box. There is no connection from TV to receiver.
In the past, with other devices (Roku, WDTV) I would play some content from Netflix or Amazon prime, but would then turn my TV off - leaving me with just audio. I do this at night because I like to listen to something as I go to sleep.
With the FTV, I have noticed as soon as I change to a different content source on my TV, or if I turn off my TV, the audio from the FTV stops. Does anyone know if there is a way to get around this?
Click to expand...
Click to collapse
Connect the fire TV via optical out....this will continue to play the audio when you turn the TV off. Have not tried this with ftv but I have a similar situation with my windowshtpc.
Sent from my Nexus 10 using XDA Premium 4 mobile app
floepie said:
Sounds like CEC HDMI communication between the FTV and your TV. When you turn one device off, the device that receives the signal to turn off tells the other device to turn off or go into standby. Maybe there's a setting in the FTV to turn that feature off? Or, you could probably disable it at the TV. Samsung has a different name for it (AnyNet or some such).
Click to expand...
Click to collapse
Thank you very much. That was it. I disabled it at the TV level. It's called "Power Link" on Panasonic TV's.
It appears I also am having this problem, but my TV does not have an option to turn off the power feature. I remember awhile back someone somewhere saying there was an adapter for the hdmi that helped with this. Anyone have an idea of what it was? Would love to listen to music on this thing and not return it and go back to my old Roku
Sorry - Bit of Necro Posting! Seemed better than starting a new one.
I have pretty much the same issue - have no option on my Samsung TV to disable CEC as it does not support it (confirmed with Samsung).
If it turn off the TV it stops the audio and the youtube app will "crash". i put that in inverted commas as it is a strange sort of crash. the app still functions and will browse the subscriptions/channels ect but will not load the video - i just get the spinning dots. Only a full restart of the device fixes it
Have reset to factory defaults and deleted the apps.
Thinking it is connected to the TV in some way as if i put a HDMI switcher in between, it doesnt happen.
Gen 1 AFTV - latest OS
Sound - Optical out to Samsung Soundbar
Video - HDMI to Samsung LT31D
If anyone has any ideas, i'd be grateful. Happy to supply any info that may be usefull.
Cheers
Rob
Robmason1982 said:
Sorry - Bit of Necro Posting! Seemed better than starting a new one.
I have pretty much the same issue - have no option on my Samsung TV to disable CEC as it does not support it (confirmed with Samsung).
If it turn off the TV it stops the audio and the youtube app will "crash". i put that in inverted commas as it is a strange sort of crash. the app still functions and will browse the subscriptions/channels ect but will not load the video - i just get the spinning dots. Only a full restart of the device fixes it
Have reset to factory defaults and deleted the apps.
Thinking it is connected to the TV in some way as if i put a HDMI switcher in between, it doesnt happen.
Gen 1 AFTV - latest OS
Sound - Optical out to Samsung Soundbar
Video - HDMI to Samsung LT31D
If anyone has any ideas, i'd be grateful. Happy to supply any info that may be usefull.
Cheers
Rob
Click to expand...
Click to collapse
if you have root on firetv just remove CEC support from the FTV
Ludacrisvp said:
if you have root on firetv just remove CEC support from the FTV
Click to expand...
Click to collapse
Can you advise how i would do that - cant see it in settings? I have rooted.
Many thanks
Removal of the CEC daemon process is likely all you need to do.
Mount system partition as read write then remove:
/system/bin/cecdaemon
Then reboot.
http://forum.xda-developers.com/fire-tv/help/solved-hdmi-cec-firetv-4k-fireos-5-0-5-t3328985
I am using Kodi on my Fire TV and noticed that the movies are only playing in stereo mode. The Dolby settings on the Fire TV itself are set to automatic and trailers play in surround sound. Are there settings in Kodi that need to be modified? Any help is appreciated!
burowyako said:
I am using Kodi on my Fire TV and noticed that the movies are only playing in stereo mode. The Dolby settings on the Fire TV itself are set to automatic and trailers play in surround sound. Are there settings in Kodi that need to be modified? Any help is appreciated!
Click to expand...
Click to collapse
Go to the audio output settings in Kodi, and make sure you are on the expert level. Put the number of channels to 2.0, passthrough enabled, and select all the audio formats at the bottom.
Yes I'm struggling getting surround sound as well, have lived with it up until now as usually everything I'm watching says 2.0 stereo, but last night actually found something that said 5.1 and I wasn't getting any sound from that! lol
Have tried different settings (as above) but still no sound through my amp, have only just really started looking into it but nothing worked in all the different guides I tried.
Will hopefully get this sorted soon, there are quite a few settings in the expert mode so will hopefully get round to trying them all, it's just having to go back and forth after changing the set up that's the pain lol
wonneil said:
Yes I'm struggling getting surround sound as well, have lived with it up until now as usually everything I'm watching says 2.0 stereo, but last night actually found something that said 5.1 and I wasn't getting any sound from that! lol
Have tried different settings (as above) but still no sound through my amp, have only just really started looking into it but nothing worked in all the different guides I tried.
Will hopefully get this sorted soon, there are quite a few settings in the expert mode so will hopefully get round to trying them all, it's just having to go back and forth after changing the set up that's the pain lol
Click to expand...
Click to collapse
What is your connection to the amp? Is it HDMI, or optical?
lennie paz said:
What is your connection to the amp? Is it HDMI, or optical?
Click to expand...
Click to collapse
I have an HDMI connection, when playing a 5.1 video I can see the front left/right speaker icons stuttering on my amp (usually it would show all 5 speakers) and no sound comes through. I suppose it could be the stream but think it's probably my settings...
Is the amp supposed to convert even when playing a 2.0 stream or does it have to be a 5.1? I have always assumed it has to start as 5.1 which is why I've left it until now
wonneil said:
I have an HDMI connection, when playing a 5.1 video I can see the front left/right speaker icons stuttering on my amp (usually it would show all 5 speakers) and no sound comes through. I suppose it could be the stream but think it's probably my settings...
Is the amp supposed to convert even when playing a 2.0 stream or does it have to be a 5.1? I have always assumed it has to start as 5.1 which is why I've left it until now
Click to expand...
Click to collapse
Some amps will convert a 2.0 audio stream into a fake 5.1 stream, but it's an actual setting on the amp. Do you have DD audio set to On in the settings for the AFTV? What brand is the amp?
lennie paz said:
Some amps will convert a 2.0 audio stream into a fake 5.1 stream, but it's an actual setting on the amp. Do you have DD audio set to On in the settings for the AFTV? What brand is the amp?
Click to expand...
Click to collapse
Yes I've set it to DD Plus via HDMI and have now pretty much tried all the settings in the audio options including 2.0, 5.1 and also (my setup) 7.1 but none seem to work, have also tried changing the Output config, Stereo upmix, Resample quality, Keep audio device alive but nothing is happening, still getting no sound when it displays 5.1 DD on the stream, even tried another episode and the same thing.
My amp is a Sony STR-DA3600ES which is DTS capable but like I say the speaker icons flicker when playing the stream so there's definitely something not quite right
I have never had problems with anything else so think I may have to just give up on this Kodi problem
wonneil said:
Yes I've set it to DD Plus via HDMI and have now pretty much tried all the settings in the audio options including 2.0, 5.1 and also (my setup) 7.1 but none seem to work, have also tried changing the Output config, Stereo upmix, Resample quality, Keep audio device alive but nothing is happening, still getting no sound when it displays 5.1 DD on the stream, even tried another episode and the same thing.
My amp is a Sony STR-DA3600ES which is DTS capable but like I say the speaker icons flicker when playing the stream so there's definitely something not quite right
I have never had problems with anything else so think I may have to just give up on this Kodi problem
Click to expand...
Click to collapse
Here are my exact settings, and 5.1 audio plays perfect. If these settings don't work for you, then it might be that the AFTV doesn't play well with your amp when connected with HDMI. I bought a Denon amp a few weeks ago, and no matter what the settings were, I couldn't get 5.1 audio to work. I returned the Denon, and bought a Yamaha, and 5.1 audio plays perfectly. Another thing you can try, is run an optical cable from the AFTV to the Sony, and see if that works. Make sure you go into the AFTV settings and change the audio output from HDMI, to optical. You may also want to try a new HDMI cable.
lennie paz said:
Here are my exact settings, and 5.1 audio plays perfect. If these settings don't work for you, then it might be that the AFTV doesn't play well with your amp when connected with HDMI. I bought a Denon amp a few weeks ago, and no matter what the settings were, I couldn't get 5.1 audio to work. I returned the Denon, and bought a Yamaha, and 5.1 audio plays perfectly. Another thing you can try, is run an optical cable from the AFTV to the Sony, and see if that works. Make sure you go into the AFTV settings and change the audio output from HDMI, to optical. You may also want to try a new HDMI cable.
Click to expand...
Click to collapse
Cheers Lennie, I thought about changing the HDMI cable so will definitely try that when I get home, if not will try optical as I didn't even think of that lol
Have tried your settings already (although didn't have the volume on downmix option) with no luck so the cable changes are the only thing left, will let you know how I get on... :good:
I managed to have a look at this last night (after searching various forums) and thought I would try XBMC to see if anything broke in Kodi 14.1, so installed the last Gotham built SPMC (13.4.0) but that had exactly the same results.
Pulled out all my equipment to change the HDMI cable over but that made no difference either, so plugged in an optical cable, changed the audio input on my amp and changed the AFTV to DD over optical and had 5.1 sound straight away :good:
So looks like there's something strange with Kodi/XBMC when trying to get 5.1 surround using HDMI on some amps...
wonneil said:
I managed to have a look at this last night (after searching various forums) and thought I would try XBMC to see if anything broke in Kodi 14.1, so installed the last Gotham built SPMC (13.4.0) but that had exactly the same results.
Pulled out all my equipment to change the HDMI cable over but that made no difference either, so plugged in an optical cable, changed the audio input on my amp and changed the AFTV to DD over optical and had 5.1 sound straight away :good:
So looks like there's something strange with Kodi/XBMC when trying to get 5.1 surround using HDMI on some amps...
Click to expand...
Click to collapse
Glad you got it sorted out. Like I said, I bought a new Pioneer a few weeks ago, and couldn't get the audio to work using HDMI. I returned it and bought a Yamaha, and it works perfectly. The only reason I figured it out, was when the audio wasn't working, I took the AFTV and hooked it up to my other home theater setup, and it worked fine with my Denon receiver. The audio was making a really high pitched static sound when using the Pioneer. My Xfinity box's audio worked fine with the Pioneer, so I know it was the AFTV, not the Pioneer, that was the issue.
lennie paz said:
Here are my exact settings, and 5.1 audio plays perfect. If these settings don't work for you, then it might be that the AFTV doesn't play well with your amp when connected with HDMI. I bought a Denon amp a few weeks ago, and no matter what the settings were, I couldn't get 5.1 audio to work. I returned the Denon, and bought a Yamaha, and 5.1 audio plays perfectly. Another thing you can try, is run an optical cable from the AFTV to the Sony, and see if that works. Make sure you go into the AFTV settings and change the audio output from HDMI, to optical. You may also want to try a new HDMI cable.
Click to expand...
Click to collapse
Know this is a old thread but hopefully you will reply. Using Kodt why do we have to select 2.0 to get 5.1 surround sound or am I not understanding what you are saying?
lartomar2002 said:
Know this is a old thread but hopefully you will reply. Using Kodt why do we have to select 2.0 to get 5.1 surround sound or am I not understanding what you are saying?
Click to expand...
Click to collapse
That's because Passthrough has been enabled, which means your receiver is doing the audio decoding.
Interesting. If I remember correctly I did not have to do that with SPMC Gotham 13.2, strange.
I know this is not the right spot but maybe someone could help me. I just got my shield console and it is sending multi channel audio to my receiver. I DO NOT want multi channel audio i want 2.0 audio. Does anyone know a way to NOT send multi channel audio?
Very helpful thread thanks!
Just a query though...
If I have 'Number of channels' set to 2.0 and have 'Stereo Upmix' on the reciever seems louder and high quality but with vocals coming out of all speakers which to me it should be centre speaker only. But if I have 'Stereo Upmix' off the centre channel is vocal only which to me is perfect but the quality is lower.
Is it just how it is or am I doing something wrong?
Running Fire tv stick (quad core version) running to Onkyo reciever.
Sent from my SM-G901F using Tapatalk
FYI, if you want to keep DTS Passthrough, don't upgrade KODI past 16.1 Jarvis. DTS passthrough is gone in Krypton on AFTV because that "Android" standards require API 23 (Marshmallow/Android 6.0) to "officially" support DTS and AFTV is still on API 22 (FireOS based on Android 5 Lollipop). I don' t see Amazon updating to a Marshmallow based image for FireOS anytime soon. It is a sad day.
Also if you want dts passthrough you can't enable "sync playback to display" otherwise it's going to passthrough as Dolby digital.
I updated my FTV in hopes of using the BT headphones to watch movies in bed so I don't bother my wife. I can get the heaphones to pair but in every video app there seems to be lip sync issues where the audio is slow a few seconds from the video.
I am using a LG HBS700 headset and don't know if it's the headset or the FTV that is the problem. Is there a way to fix the lag?
I hooked up my Plantronics BackBeat Go 2 to the Amazon FireTV. Amazon Prime and Netflix seems to sync audio and video just fine but XBMC has noticeable sync issues. That can be easily offset within the video playback settings in XBMC. I have to adjust the audio ahead 800ms in addition to the subtitle behind 1000ms.
I have a LG HBS-900 and have the same problem.
I remember seeing a warning message that hooking up bluetooth headsets may cause connection issues with the WiFi. Even though I'm connecting through WiFi from bedroom, didn't appear to affect me other than XBMC. You may also try it through wired Amazon FireTV connection to see if that makes a difference. So unless they have some newer firmware for your bluetooth headset, you might be SOL. Try another brand?
My Fire TV gen1 can't be used in headless mode. It is connected to my beamer via HDMI and to my receiver via S/PDIF. The sound is heavily distorted when no HDMI device is connected or when the device is in standby. When I turn my beamer on, the sound is restored to normal immediately and stays that way even if the beamer is switched off again up to the next power cycle/reboot of the FTV. Did anyone observe similar behavior and has any idea for a fix? I already tried all available sound settings in the Fire TV, unfortunately.
Well, just for your information or if anyone encounters a similar problem: it does not work. The box needs an HDMI handshake or most likely an identified display once after reboot to play music. It is the same with the Fire TV 2. A HDMI-to S/PDIF converter or a switch do not seem to provide a solution. My workaround: the box is not disconnected from power and thus not rebooted when my other equipment is powered down. Works like a charm but wastes ~26 kW of power per year.
Hi!
I have a TCL BeyondTV2 (C715) and a Harman Kardon AVR 171s, that has HDMI ARC capability. My brother who owned the system before used it without problem with a Sony Bravia TV (I don't know the exact model) through HDMI ARC. (I think he only had an issue that the AVR could not turn on with CEC only off, but I think he just misconfigured it)
Now I have the AVR and tried to use it with my TCL C715 through ARC, but with no luck. I have all CEC and everything set up, and it is works... for about 10 minutes, when the TV switches back to speakers, and TV remote stops to relay volume up and down controls to AVR. If I switch the input on the AVR from HDMI to something else and back, sometimes it comes back for another 5-10 minutes.
If I use the AVR with S/PDIF the audio is fine, but obviously I cannot control it with my TV remote so, I have to use 2 remotes and separately switch on everything. It is annoying
I recently updated the TV's system to V8-R851T02-LF1V715.000032, but it did not fixed the issue.
I think i have the latest update on the AVR.
Did someone encountered this problem? Does anybody have ideas how I could debug this? I did not find any related posts on the forum, but maybe I missed one. I have ADB set up, so if there is a way to get logs I would be happy to (I did not see anything with logcat, but maybe I used it incorrectly)
Any ideas appreciated!