Related
i have this issue with my phone ,yesterday i flashed a rom via odin but i didn't check the debuging mode and instaled the rom anyway ,my phone boot perfectly but when i press vol up +home+ power it doesnt nothing the only that appears is the logo of samsung galaxy notell ,wath can i do ?
INGHUGO said:
i have this issue with my phone ,yesterday i flashed a rom via odin but i didn't check the debuging mode and instaled the rom anyway ,my phone boot perfectly but when i press vol up +home+ power it doesnt nothing the only that appears is the logo of samsung galaxy notell ,wath can i do ?
Click to expand...
Click to collapse
What kind debug mod in PC Odin? Auto boot & F.Reset Time need to tick only in PC Odin . Try this , turn off your phone then hold vol up + home+Power button 6 second ( dont release right away when you see boot logo).
I have a galaxy s2 and I cannot get the phone into ODIN download mode. When I plug in the USB, while holding the down and up volume button it goes into recovery mode A3 but no DL mode. I can't get a USB connection to the computer for the phone to be recognized so I was trying to get into ODIN DL mode to see if I can get a connection this way but no luck
josephh71 said:
I have a galaxy s2 and I cannot get the phone into ODIN download mode. When I plug in the USB, while holding the down and up volume button it goes into recovery mode A3 but no DL mode. I can't get a USB connection to the computer for the phone to be recognized so I was trying to get into ODIN DL mode to see if I can get a connection this way but no luck
Click to expand...
Click to collapse
Are you trying to recover from a bad flash? Did you already root your phone? Did your try to wipe cache/factory reset from recovery? Is your phone unable to boot?
No
I've never flashed the phone before, it's not rooted and there is only the built in recovery mode. I have factory reset once but its when I first got the phone.
josephh71 said:
I've never flashed the phone before, it's not rooted and there is only the built in recovery mode. I have factory reset once but its when I first got the phone.
Click to expand...
Click to collapse
Did you try turning off your phone, pulling out the battery for a couple of seconds and then, press power + vol(+) + vol(-) and release the power button when it vibrates once?
Yep
jonmassot said:
Did you try turning off your phone, pulling out the battery for a couple of seconds and then, press power + vol(+) + vol(-) and release the power button when it vibrates once?
Click to expand...
Click to collapse
Yes and it loads into android system recovery <3a>
josephh71 said:
Yes and it loads into android system recovery <3a>
Click to expand...
Click to collapse
Basically, with the SGH-T989D, pressing both volumes buttons at the same time while loading will bring you to the recovery, but it's not supposed to be the same with the SGH-T989... Did you tried booting while holding only 1 volume button, bottom or upper?
josephh71 said:
Yes and it loads into android system recovery <3a>
Click to expand...
Click to collapse
i am assuming you want your phone in download mode so you can flash through ODIN ....right?
what do you want to flash from ODIN?
Do you want to flash a custom ROM? or stock ROM?
will tell you how to put phone in download mode but you gotta answer above question so i can help u to the right direction.
???
Custom
sam.balia1012 said:
i am assuming you want your phone in download mode so you can flash through ODIN ....right?
what do you want to flash from ODIN?
Do you want to flash a custom ROM? or stock ROM?
will tell you how to put phone in download mode but you gotta answer above question so i can help u to the right direction.
???
Click to expand...
Click to collapse
I want to flash a custom rom and root the device as well
josephh71 said:
I want to flash a custom rom and root the device as well
Click to expand...
Click to collapse
1-use ODIN to flash cwm (clockwork mod) & root your phone First
2-after that u flash any custom ROM while in cwm.
How:
1- your pc has to have samsung usb drivers (one way to do that is to downlaod samsung Kies)
download to your pc these files:
“recovery-cmw-hercules.tar”
CWM-SuperSU-v0.87.zip
get them from here http://galaxys2root.com/t-mobile-galaxy-s2/how-to-root-icsgb-on-t-mobile-galaxy-s2-sgh-t989/
Now, to put phone in download mode: Turn phone off- take battery out Then put it back in- hold vol+/- down & plug usb cable in phone
screen will come on- move vol up -----> u in download mode. (at this stage only usb cable or you following steps can make this not work)
Start ODIN........u can see the rest from link above.
After phone is rooted and has cwm installed Now u can copy any ROM to scdard and flash it through cwm.
to put phone in cwm (recovery) same as above except Hold vol+/- & power button (no USB cable) samsung will show up on screen Let go of power button and keep holding vol+/- ----> now u are in recovery ....install your rom + gapps and reboot
Two importand thinhs: after rooting and installing cwm ------back up your current rom & make sure make sure you flash ROMS for your device (Hercules) only ....u flash a rom/kernel for another device YOU WILL brick your phone,
after the first time....its super easy
Hit thanks
jonmassot said:
Did you try turning off your phone, pulling out the battery for a couple of seconds and then, press power + vol(+) + vol(-) and release the power button when it vibrates once?
Click to expand...
Click to collapse
Pull the battery, plug the cable into the phone, Hold the up and down rockers, put the battery back into the phone and power it on while holding the rockers. A yellow screen with a warning will come up. Pressing the Up rocker will get to DL mode. Pressing down will reboot the phone. But unless your phone is connected to the computer/power, DL mode is difficult to get to. Hope that helps
when do you put the battery back in?
how to un brick sm-t211
i just rooted my device and download chain fire but when the device reboot it stops at my device name i ask my friends they tell me that i bricked my device software i cant know can do and when i search about the firmware i only found hot file which it only work in usa and i dont live in usa
please what i can do is there any thing to download please help me with links
and this website is the best:good:
You have not bricked your phone download an oddin rooted software from dev section go into download with power off hold volume down home and power when screen comes on release power only then release others when the screen comes on, then volume up to go into download mode connect to the computer open odin select your firmware in pda then press start when finished do factory reset clear cash and dalvic cash job done.
Sent from my GT-I9505 using XDA Premium 4 mobile app
I also "soft-bricked" mine T211, and I successfully restored it via Kies!
Just pick option "Emergency Firmware Restore"
my com:16 keeps on blinking in Odin
briandevlin said:
You have not bricked your phone download an oddin rooted software from dev section go into download with power off hold volume down home and power when screen comes on release power only then release others when the screen comes on, then volume up to go into download mode connect to the computer open odin select your firmware in pda then press start when finished do factory reset clear cash and dalvic cash job done.
Sent from my GT-I9505 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
What should I do bro? my Tab keeps on blinking in odin upon Download Mode of the device
Help
sniperkiki said:
I also "soft-bricked" mine T211, and I successfully restored it via Kies!
Just pick option "Emergency Firmware Restore"
Click to expand...
Click to collapse
Which Kies Version Are u usind?
my sm t211 was bootdead...cannot boot cannot charging cannot recovery even download mode....any help please....tq
SM-T211 stuck at samsung Logo
hello all guru.. I just trying to root my Tab 3 SM-T211.. process was successful at Odin page but when tablet restart it was stuck at samsung logo . Unabale to enter recovery mode except download mode. Kindly assist...cracking my head tonite as internet connection also slow...:crying:
Since SMT210 and SMT211 uses same boot loader? I think I can post my brick problem here, my device shows EMEI as device name, and manufacturer is Marvell. It is Dead boot no response to anything, odin, charger, download mode, nothing... I think the bootload is corrupt does someone has a "unbrick sd image". ..
Hello, I have tried to flash http://techerrata.com/browse/twrp2/klimtwifi via odin but did not checked autoreboot so the download mode shows me download progress bar at 100% but I cannot reboot the tablet by any hardware key (power button does not react) and the odin cannot connect to it again. Normally I would pull out the battery but it seems that get into the 8.4 is a littble bit harder without appropriate tools. Any suggestion how to get out / reboot from download mode please?
festr said:
Hello, I have tried to flash http://techerrata.com/browse/twrp2/klimtwifi via odin but did not checked autoreboot so the download mode shows me download progress bar at 100% but I cannot reboot the tablet by any hardware key (power button does not react) and the odin cannot connect to it again. Normally I would pull out the battery but it seems that get into the 8.4 is a littble bit harder without appropriate tools. Any suggestion how to get out / reboot from download mode please?
Click to expand...
Click to collapse
Hold power, home, volume up and down buttons at the same time until it reboots. Hope this helps!
you are best! it worked! I swear I tried it. But probably not up/down at the same time.
festr said:
you are best! it worked! I swear I tried it. But probably not up/down at the same time.
Click to expand...
Click to collapse
No problem! I answer questions like these all the time. If you have anymore questions, I'm here for ya
if you are stuck at samsung logo after flashing with odin
here's what you have to do:
1. While on Samsung logo. press power key + volume up and down + home button (all together)
2. When the screen is off. Press Power key + Volume Up + home button to enter recovery mode.
3. Wipe Data
4. Wipe Cache
5. Reboot to system
you should be fine right now ^^
cheers!
lexjay said:
if you are stuck at samsung logo after flashing with odin
here's what you have to do:
1. While on Samsung logo. press power key + volume up and down + home button (all together)
2. When the screen is off. Press Power key + Volume Up + home button to enter recovery mode.
3. Wipe Data
4. Wipe Cache
5. Reboot to system
you should be fine right now ^^
cheers!
Click to expand...
Click to collapse
I'm having that problem now. I followed your instructions and got to the recovery mode or "Odin Mode" and it's been saying it's downloading for about 10 min or so. Any idea on how long it should take ?
casual167 said:
I'm having that problem now. I followed your instructions and got to the recovery mode or "Odin Mode" and it's been saying it's downloading for about 10 min or so. Any idea on how long it should take ?
Click to expand...
Click to collapse
Actually I believe it's the download mode that I'm in. It doesn't seem to get to the recovery mode when I press the Volume up key and power button for some reason.. Am I doing something wrong
casual167 said:
Actually I believe it's the download mode that I'm in. It doesn't seem to get to the recovery mode when I press the Volume up key and power button for some reason.. Am I doing something wrong
Click to expand...
Click to collapse
Follow these instructions implicitly.
Hold POWER + VOL DOWN + HOME.
As soon as it restarts change to VOL UP while still holding the other buttons.
Do NOT let go of any of the buttons until recovery boots.
ashyx said:
Follow these instructions implicitly.
Hold POWER + VOL DOWN + HOME.
As soon as it restarts change to VOL UP while still holding the other buttons.
Do NOT let go of any of the buttons until recovery boots.
Click to expand...
Click to collapse
That's what I've been doing exactly but for some reason it just goes right back to the logo screen. I was able to get into the recovery mode one time out of 100 and I went through the process of factory reset but it didn't solve the problem. Now I can't get back into it. It's weird because I have no problem getting into the download mode pressing the volume down but volume up doesn't seem to work. Not sure why or what to do
I'd try reflashing stock recovery then try booting into it again.
If it flashes then you should be able to boot into it.
http://www.mediafire.com/?qyybs0m1yln443x
ashyx said:
I'd try reflashing stock recovery then try booting into it again.
If it flashes then you should be able to boot into it.
http://www.mediafire.com/?qyybs0m1yln443x
Click to expand...
Click to collapse
How exactly would I do that? I'm not to inclined when it comes to this stuff so any help you can give would be appreciated
Install Samsung usb drivers, put your tab into download mode, connect to pc, run Odin, load the file into the AP slot then click start.
http://forum.xda-developers.com/attachment.php?attachmentid=3109599&d=1420980613
i think i bricked mine...
These are the 2 screens i get whenever i try anything
joker616 said:
i think i bricked mine...
These are the 2 screens i get whenever i try anything
Click to expand...
Click to collapse
You haven't bricked anything, there could be any number of reasons why it won't boot past the logo.
Easiest way to resolve it would be to reinstall the stock rom.
The second image is download mode.
joker616 said:
i think i bricked mine...
These are the 2 screens i get whenever i try anything
Click to expand...
Click to collapse
That's the exact same situation I'm in. Every time I restart it I can't get passed that damn Samsung logo screen. I tried the whole flash with Odin process but I realized that when I connect the tablet to the computer, I get an "MTP Device Driver Failed" message so I'm assuming since the computer doesn't recognize it, even tried with KEIS and it doesn't, that I'm unable to complete the Odin job because that goes until 'Initialization' and stops there. Were you able to fix yours?
casual167 said:
That's the exact same situation I'm in. Every time I restart it I can't get passed that damn Samsung logo screen. I tried the whole flash with Odin process but I realized that when I connect the tablet to the computer, I get an "MTP Device Driver Failed" message so I'm assuming since the computer doesn't recognize it, even tried with KEIS and it doesn't, that I'm unable to complete the Odin job because that goes until 'Initialization' and stops there. Were you able to fix yours?
Click to expand...
Click to collapse
Are you saying you still can't get into recovery mode?
Also what is your device model?
ashyx said:
Are you saying you still can't get into recovery mode?
Also what is your device model?
Click to expand...
Click to collapse
No I can't. I've tried a thousand times in all different sequences of holding the three buttons and it just doesn't go. It's SM-T800. They screen shots on the first page is exactly what I get. Either the logo screen when trying to get into recovery or download mode which it has no problem going into.
casual167 said:
No I can't. I've tried a thousand times in all different sequences of holding the three buttons and it just doesn't go. It's SM-T800. They screen shots on the first page is exactly what I get. Either the logo screen when trying to get into recovery or download mode which it has no problem going into.
Click to expand...
Click to collapse
The two files below should boot you directly into recovery as soon as you start the tablet if you can flash them. Flash with Odin from the AP slot.
Make sure you put the device into DOWNLOAD mode first then connect your usb cable!
You can then do a factory reset and then try and flash the stock rom.
Stock recovery
Twrp recovery
.
ashyx said:
The two files below should boot you directly into recovery as soon as you start the tablet if you can flash them. Flash with Odin from the AP slot.
Make sure you put the device into DOWNLOAD mode first then connect your usb cable!
You can then do a factory reset and then try and flash the stock rom.
Stock recovery
Twrp recovery
.
Click to expand...
Click to collapse
Yeah I tried that too but when I connect the tablet to my comp, I get this 'Samsung Mobile MTP Device Failed' message so my comp doesn't even recognize the tablet. I even tried connecting with KEIS but that doesn't see it either because of that error. Idk if that's related to this issue that I'm having but I'm assuming that since the comp doesn't recognize the tablet because of that error, it won't finish the ODIN job. I get up to 'Initialization' and nothing after. I tried uninstalling and reinstalling the Samsung drivers and that didn't work either. Seems I can't catch a break here
casual167 said:
Yeah I tried that too but when I connect the tablet to my comp, I get this 'Samsung Mobile MTP Device Failed' message so my comp doesn't even recognize the tablet. I even tried connecting with KEIS but that doesn't see it either because of that error. Idk if that's related to this issue that I'm having but I'm assuming that since the comp doesn't recognize the tablet because of that error, it won't finish the ODIN job. I get up to 'Initialization' and nothing after. I tried uninstalling and reinstalling the Samsung drivers and that didn't work either. Seems I can't catch a break here
Click to expand...
Click to collapse
Mtp, kies and anything else is irrelevant, they are OS dependent.
Just put the tablet into download mode. Download mode works in boot loader mode. No need for the os.
ashyx said:
Mtp, kies and anything else is irrelevant, they are OS dependent.
Just put the tablet into download mode. Download mode works in boot loader mode. No need for the os.
Click to expand...
Click to collapse
Ok than Idk why it doesn't go passed the 'Initialization'. I tried multiple times and keep getting stuck on that
casual167 said:
Ok than Idk why it doesn't go passed the 'Initialization'. I tried multiple times and keep getting stuck on that
Click to expand...
Click to collapse
Ok we need to take this step by step as theres something amiss here.
DID YOU AT ANY POINT WHILE THE TABLET WAS WORKING ENABLE 'REACTIVATION LOCK'?
1. Ensure the Samsung drivers are installed (important) Samsung usb driver
2. Before connecting anything to the PC put the tablet in DOWNLOAD mode first.
3. Plug the USB cable into a USB 2 port
4. Wait for the 'ADDED' message (if you dont get this it wont work)
5. Load the tar file into the AP slot.
6. Click START
7. If it doesn't start to flash reboot the tablet directly back into DOWNLOAD mode without touching anything else then unplug and replug the USB cable back in.
8. If it still doesn't flash try ODIN 3.07 ODIN
9. Report back and post a screenshot (if it doesn't work).
ashyx said:
Ok we need to take this step by step as theres something amiss here.
DID YOU AT ANY POINT WHILE THE TABLET WAS WORKING ENABLE 'REACTIVATION LOCK'?
1. Ensure the Samsung drivers are installed (important) Samsung usb driver
2. Before connecting anything to the PC put the tablet in DOWNLOAD mode first.
3. Plug the USB cable into a USB 2 port
4. Wait for the 'ADDED' message (if you dont get this it wont work)
5. Load the tar file into the AP slot.
6. Click START
7. If it doesn't start to flash reboot the tablet directly back into DOWNLOAD mode without touching anything else then unplug and replug the USB cable back in.
8. If it still doesn't flash try ODIN 3.07 ODIN
9. Report back and post a screenshot (if it doesn't work).
Click to expand...
Click to collapse
I know for a fact that I never enabled the Reactivation Lock.. But you know, after literally days and hours including my entire weekend just searching the internet and trying every possible fix scenario that people have tried, I just gave in and sent it to Samsung this afternoon to have them fix it. Nothing I was doing seemed to work and I do believe I tried everything within my little knowledge to try. Let me ask you though, when I get it back in normal working order, would going through the steps to install the TWRP recovery and a ROM prevent me from being in this situation again or at least be able to actually fix it on my own?
If you dont mind tripping Knox and possibly warranty then I believe installing custom recovery is one of the best tools you can Install to a device.
It can get you back to a working state in minutes if you make a full backup.
It's a no brainer to install custom recovery if you intend to root and modify the device in any way.