hey guys I am developer and I got a bricked note 2.
If I go to philz touch recovery it says cant mount stuff and I cant flash anything.
In Odin it says Complete(write) operation failed.
Is my internal storage dead ?
same issue: http://www.sammobile.com/forum/showthread.php?t=23014&page=3
AndrolinRoot said:
hey guys I am developer and I got a bricked note 2.
If I go to philz touch recovery it says cant mount stuff and I cant flash anything.
In Odin it says Complete(write) operation failed.
Is my internal storage dead ?
same issue: http://www.sammobile.com/forum/showthread.php?t=23014&page=3
Click to expand...
Click to collapse
Would you share what you've tried to flash with Odin and what has been your last firmware, bootloader?
Androidwizzard said:
Would you share what you've tried to flash with Odin and what has been your last firmware, bootloader?
Click to expand...
Click to collapse
I was on the cm nightly and than it did not start after some months. I tried to flash a lot of different stock roms and also tried different pit files. Seems to me like my internal sd is dead
AndrolinRoot said:
I was on the cm nightly and than it did not start after some months. I tried to flash a lot of different stock roms and also tried different pit files. Seems to me like my internal sd is dead
Click to expand...
Click to collapse
I've asked for firmware/bootloader, not last custom rom. Last firmware is important to know to give an advice.
What stock roms have you tried?
Another option is to restore using Kies, tried?
Androidwizzard said:
I've asked for firmware/bootloader, not last custom rom. Last firmware is important to know to give an advice.
What stock roms have you tried?
Another option is to restore using Kies, tried?
Click to expand...
Click to collapse
Tried kies emergency restore but failes aswell.
I think I had 4.2 on it before.
AndrolinRoot said:
Tried kies emergency restore but failes aswell.
I think I had 4.2 on it before.
Click to expand...
Click to collapse
Only reasonable chance I see is to flash any firmware above 4.2 through Odin. Mj5 (4.3) to NL1 (4.4.2)
Androidwizzard said:
Only reasonable chance I see is to flash any firmware above 4.2 through Odin. Mj5 (4.3) to NL1 (4.4.2)
Click to expand...
Click to collapse
Could you link me to one please ? Does it matter which odin version I use ? And also a link to a pit file would be nice !
Thank you
AndrolinRoot said:
Could you link me to one please ? Does it matter which odin version I use ? And also a link to a pit file would be nice !
Thank you
Click to expand...
Click to collapse
Odin 3.09 is actual version and firmware you get HERE.
If I remember correctly there has been a change in partitions with Android 4.3, so hopefully not more than the firmware will be needed.
Androidwizzard said:
Odin 3.09 is actual version and firmware you get HERE.
If I remember correctly there has been a change in partitions with Android 4.3, so hopefully not more than the firmware will be needed.
Click to expand...
Click to collapse
I assume you can enter download mode. When doing so, what do you see in the top left corner? If you DONT see a product name then i believe that means you have a failure.
If you DO see a product name then that's another question i am trying to figure out as well
Thanks
grwalker said:
I assume you can enter download mode. When doing so, what do you see in the top left corner? If you DONT see a product name then i believe that means you have a failure.
If you DO see a product name then that's another question i am trying to figure out as well
Thanks
Click to expand...
Click to collapse
I see the product name of the note 2
AndrolinRoot said:
I see the product name of the note 2
Click to expand...
Click to collapse
Then i believe you dont have the classic SDS issue. In that case the product name is blank.
I also have the same issue. No matter what i try (Kies or Odin) everything fails.
I sent the phone to a technician (http://gsm-technix.de/shop/) and he says the emmc chip has failed which he cant fix. Perhaps you have the same issue. But i cannot get absoulte answers if my (and your) symptoms are an SDS
Thanks
grwalker said:
Then i believe you dont have the classic SDS issue. In that case the product name is blank.
I also have the same issue. No matter what i try (Kies or Odin) everything fails.
I sent the phone to a technician (http://gsm-technix.de/shop/) and he says the emmc chip has failed which he cant fix. Perhaps you have the same issue. But i cannot get absoulte answers if my (and your) symptoms are an SDS
Thanks
Click to expand...
Click to collapse
I guess the problem is battery
AndrolinRoot said:
I guess the problem is battery
Click to expand...
Click to collapse
How do you conclude it is the battery that is the problem?
grwalker said:
How do you conclude it is the battery that is the problem?
Click to expand...
Click to collapse
because its not charging and recovery always shows 91% battery.
AndrolinRoot said:
because its not charging and recovery always shows 91% battery.
Click to expand...
Click to collapse
So you can enter recovery?
Can you post some screenshots of the issue please?
Related
Phone will not fully boot after flashing a rom, and not being able to restore my nandroidbackup any help?
T3hBraveBoss said:
Phone will not fully boot after flashing a rom, and not being able to restore my nandroidbackup any help?
Click to expand...
Click to collapse
Can you get into download mode?
T3hBraveBoss said:
Phone will not fully boot after flashing a rom, and not being able to restore my nandroidbackup any help?
Click to expand...
Click to collapse
When I did this, I had to ODIN the stock .tar file back on to fix it. I could still get into download mode, but not CWM
Go here and get ODIN(if you don't already have it)
http://forum.xda-developers.com/showthread.php?t=1722686
Go here for your stock ROM(I hope you remember which you were on)
EDIT - you're on a Canadian model, not sure if the stock file is the same as the AT&T version but if it is
http://forum.xda-developers.com/showthread.php?t=1737848
When I did it, all my apps and everything was still there, but I had to redo the root and reinstall CWM again.
nest75068 said:
When I did this, I had to ODIN the stock .tar file back on to fix it. I could still get into download mode, but not CWM
Go here and get ODIN(if you don't already have it)
http://forum.xda-developers.com/showthread.php?t=1722686
Go here for your stock ROM(I hope you remember which you were on)
EDIT - you're on BELL
When I did it, all my apps and everything was still there, but I had to redo the root and reinstall CWM again.
Click to expand...
Click to collapse
I can go into clockworkmod recovery, and when I attemped to restore from my back up it fails
T3hBraveBoss said:
I can go into clockworkmod recovery, and when I attemped to restore from my back up it fails
Click to expand...
Click to collapse
The only thing I can assume is you have a bad backup. I would recommend starting over then
nest75068 said:
The only thing I can assume is you have a bad backup. I would recommend starting over then
Click to expand...
Click to collapse
I think its becuase when I flashed the rom the kernel changed
so what do I do at this moment
T3hBraveBoss said:
I think its becuase when I flashed the rom the kernel changed
so what do I do at this moment
Click to expand...
Click to collapse
Go back to stock, find your stock .tar firmware and install through ODIN
nest75068 said:
Go back to stock, find your stock .tar firmware and install through ODIN
Click to expand...
Click to collapse
like the same file i used to root my phone?
T3hBraveBoss said:
like the same file i used to root my phone?
Click to expand...
Click to collapse
No, the firmware straight from Samsung, the original firmware that the phone shipped with.
nest75068 said:
No, the firmware straight from Samsung, the original firmware that the phone shipped with.
Click to expand...
Click to collapse
can you link me towards it
T3hBraveBoss said:
can you link me towards it
Click to expand...
Click to collapse
You should be able to find it on samsung-updates. Here is a link.
http://samsung-updates.com/device/?id=SGH-I747M
T3hBraveBoss said:
can you link me towards it
Click to expand...
Click to collapse
Wht is your model #?
See what happens when you multi task at work while trying to read post on XDA hahaha, just realized you can't go to settings.
Look under the battery at your model #. I feel like a tool just now.
nest75068 said:
Wht is your model #?
See what happens when you multi task at work while trying to read post on XDA hahaha, just realized you can't go to settings.
Look under the battery at your model #. I feel like a tool just now.
Click to expand...
Click to collapse
I found it, I am downloading the stock rom for i747m
this would be the proper guide per say
http://galaxys3root.com/galaxy-s3-unroot/how-to-unroot-att-galaxy-s3-sgh-i747/
T3hBraveBoss said:
I found it, I am downloading the stock rom for i747m
this would be the proper guide per say
http://galaxys3root.com/galaxy-s3-unroot/how-to-unroot-att-galaxy-s3-sgh-i747/
Click to expand...
Click to collapse
:good:
Yep those are the steps
nest75068 said:
:good:
Yep those are the steps
Click to expand...
Click to collapse
yeah, i fixed everything restored with my nandroid backup. not flashing roms anymore... I dont think its worth the trouble
T3hBraveBoss said:
yeah, i fixed everything restored with my nandroid backup. not flashing roms anymore... I dont think its worth the trouble
Click to expand...
Click to collapse
I just switched over from iOS and found the guides on here were easy to follow and didn't have any issues . Getting the right downloads is probably the key
And what do you mean by "Phone will not fully boot after flashing a rom" How far does it go when booting and what happens?
Just boot screen doesn't fully boot
Sent from my SGH-I747M using xda app-developers app
T3hBraveBoss said:
yeah, i fixed everything restored with my nandroid backup. not flashing roms anymore... I dont think its worth the trouble
Click to expand...
Click to collapse
It is worth the trouble if...
A. You know what you are doing.
B. You read and research.
C. You know how to recover in the event something goes wrong.
Flashing isn't for everyone. Even if you follow directions things can still go wrong in rare situations. That's just the nature of flashing.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Screen changed after root and flash cwm , I want back to original, it's lost words'GT-N7100'
jeedjaad said:
Screen changed after root and flash cwm , I want back to original, it's lost words'GT-N7100'
Click to expand...
Click to collapse
Reflash the stock rom with Odin and do a full wipe after the flash, that should fix it. Or first do a full wipe first (dialpad *2767*3855#).
gee2012 said:
Reflash the stock rom with Odin and do a full wipe after the flash, that should fix it. Or first do a full wipe first (dialpad *2767*3855#).
Click to expand...
Click to collapse
Nope,didnt fix it.Still gt-n7100 missing.Strange
edit :we may have the solution today
as i9000 looking the issue
gee2012 said:
Reflash the stock rom with Odin and do a full wipe after the flash, that should fix it. Or first do a full wipe first (dialpad *2767*3855#).
Click to expand...
Click to collapse
I did it but still have problem, thank you
jeedjaad said:
I did it but still have problem, thank you
Click to expand...
Click to collapse
Read my post.The one above yours.It has to do with the param.bin you flashed with the rom.
Sent from the Beast
afilopou said:
Read my post.The one above yours.It has to do with the param.bin you flashed with the rom.
Sent from the Beast
Click to expand...
Click to collapse
What do you mean? I must to find param. bin from where?
Thank you
jeedjaad said:
What do you mean? I must to find param. bin from where?
Thank you
Click to expand...
Click to collapse
Waiting for the "correct" param.bin file from the developer "as i9000" to make it odin flashable.I'll tell him to post the .tar file here and of course he takes the credits
afilopou said:
Waiting for the "correct" param.bin file from the developer "as i9000" to make it odin flashable.I'll tell him to post the .tar file here and of course he takes the credits
Click to expand...
Click to collapse
Waiting from now
jeedjaad said:
Screen changed after root and flash cwm , I want back to original, it's lost words'GT-N7100'
Click to expand...
Click to collapse
Splash screen picture is in sboot.bin,use odin to flash.
:laugh:
Chenglu said:
Splash screen picture is in sboot.bin,use odin to flash.
:laugh:
Click to expand...
Click to collapse
And where can i find the sboot.bin? And obviously must extracted from a "correct" phone?
afilopou said:
And where can i find the sboot.bin? And obviously must extracted from a "correct" phone?
Click to expand...
Click to collapse
Some ota package include sboot.bin,I don't remember which package.
Chenglu said:
Some ota package include sboot.bin,I don't remember which package.
Click to expand...
Click to collapse
Ok i am lucky:laugh: This OTA contains sboot.bin http://www.hotfile.com/dl/171832975/c3ae1fa/GT-N7100_N7100XXALIA-OTA-N7100XXALI8_XEF_110010085.zip.html
It is for XEF (France) ...
Is it easy for you to make a pc odin flashable file? please?
afilopou said:
Ok i am lucky:laugh: This OTA contains sboot.bin http://www.hotfile.com/dl/171832975/c3ae1fa/GT-N7100_N7100XXALIA-OTA-N7100XXALI8_XEF_110010085.zip.html
It is for XEF (France) ...
Is it easy for you to make a pc odin flashable file?
Click to expand...
Click to collapse
Downloading....
Md5: De52f4a17beee792db2c46f2b87e6d85
sha1: 24fa696a4ac81b97eb0206ac41709bdce8f4d247
crc32: E99875c3
Chenglu said:
Md5: De52f4a17beee792db2c46f2b87e6d85
sha1: 24fa696a4ac81b97eb0206ac41709bdce8f4d247
crc32: E99875c3
Click to expand...
Click to collapse
in pc odin to bootloader slot or to pda slot?
afilopou said:
in pc odin to bootloader slot or to pda slot?
Click to expand...
Click to collapse
bootloader or pda.
Chenglu said:
bootloader or pda.
Click to expand...
Click to collapse
Once again you did it....I hate you :laugh::laugh::laugh::laugh::laugh::laugh:
You are a scholar and gentleman
Also my big thanks to as i9000 these 2 days
Thank you guys
thank you community
afilopou said:
Once again you did it....I hate you :laugh::laugh::laugh::laugh::laugh::laugh:
You are a scholar and gentleman
Also my big thanks to as i9000 these 2 days
Thank you guys
thank you community
Click to expand...
Click to collapse
:good:
Ohhhh, thank you so much to Chenglu and afilopou.
So I follow this or not.
Flash stock rom before then flash bootloader.tar, is it right?And put this file in bootloader , yer or not?
Again, can you tell me what I did wrong so had the problem?
I want to know because I don't want it happen again.
Last time I used pc odin v3.07 Flash stock root odex LJ1 , everythings pass and reset but when phone reboot I saw splash screen changed.
jeedjaad said:
Ohhhh, thank you so much to Chenglu and afilopou.
So I follow this or not.
Flash stock rom before then flash bootloader.tar, is it right?And put this file in bootloader , yer or not?
Again, can you tell me what I did wrong so had the problem?
I want to know because I don't want it happen again.
Last time I used pc odin v3.07 Flash stock root odex LJ1 , everythings pass and reset but when phone reboot I saw splash screen changed.
Click to expand...
Click to collapse
Thanks to Chenglu.My part is that i chase him up
Even with the rom you are using now just put your phone in download mode and flash with pc odin the bootloader.tar
I put it in bootloader slot but you can put it in pda slot as well.
You did nothing wrong.Looks that the stock root rom we flashed had "wrong" sboot.bin
Sent from the Beast
I have just installed CM10 following this thread: http://forum.xda-developers.com/showthread.php?t=2231953
Then I realized than my Grand was working great, but I can't make phone calls. I found this thread: http://forum.xda-developers.com/showthread.php?t=2317298
and tried to flash the modem file from there using ODIN, but when I try to do it, it always ends with "fail". I don't want to go back to stock rom, anyone can give me some help?
thanks in advance
pjmorenoa said:
I have just installed CM10 following this thread: http://forum.xda-developers.com/showthread.php?t=2231953
Then I realized than my Grand was working great, but I can't make phone calls. I found this thread: http://forum.xda-developers.com/showthread.php?t=2317298
and tried to flash the modem file from there using ODIN, but when I try to do it, it always ends with "fail". I don't want to go back to stock rom, anyone can give me some help?
thanks in advance
Click to expand...
Click to collapse
If you've got the FAIL message is probably because your phone is the i9082 and not the i9082l.
makshel William
querobolo said:
If you've got the FAIL message is probably because your phone is the i9082 and not the i9082l.
Click to expand...
Click to collapse
Thanks! It didn't work because my phone is the i9080l, the one without dual sim.
How can I find some modem file for i9080l instead of i9082l? I think if I can find it my phone should work.
pjmorenoa said:
I have just installed CM10 following this thread: http://forum.xda-developers.com/showthread.php?t=2231953
Then I realized than my Grand was working great, but I can't make phone calls. I found this thread: http://forum.xda-developers.com/showthread.php?t=2317298
and tried to flash the modem file from there using ODIN, but when I try to do it, it always ends with "fail". I don't want to go back to stock rom, anyone can give me some help?
thanks in advance
Click to expand...
Click to collapse
I am sure someone can help you with that or tell you the procedure how to extract modem file.
Instead of giving your post just "[Q]" as the title, if you write a few words briefing your problem, you might get more replies.
"[Q]" makes no sense to anyone. Please change the title of this thread.
pjmorenoa said:
Thanks! It didn't work because my phone is the i9080l, the one without dual sim.
How can I find some modem file for i9080l instead of i9082l? I think if I can find it my phone should work.
Click to expand...
Click to collapse
Try to download this samsung rom, i THINK the modem is a separeted file
http://www.hotfile.com/dl/199135212/134791d/I9080LUBAMB6_I9080LUWAAMB4_PGU.zip.html
xenon92 said:
I am sure someone can help you with that or tell you the procedure how to extract modem file.
Instead of giving your post just "[Q]" as the title, if you write a few words briefing your problem, you might get more replies.
"[Q]" makes no sense to anyone. Please change the title of this thread.
Click to expand...
Click to collapse
Done, thanks!
--
Try to download this samsung rom, i THINK the modem is a separeted file
Click to expand...
Click to collapse
I downloaded it, but it's a single file named I9080LUBAMB6_I9080LUWAAMB4_I9080LUBAMB5_HOME.tar.md5
pjmorenoa said:
Done, thanks!
--
I downloaded it, but it's a single file named I9080LUBAMB6_I9080LUWAAMB4_I9080LUBAMB5_HOME.tar.md5
Click to expand...
Click to collapse
Search on the internet hot to extract the modem file, you're surely gonna find. I'd do it for you is a had a PC, but i just have a MAC
When i can flash the stock Android 4.2.2 on GT-i9082L?
josegarcia01 said:
When i can flash the stock Android 4.2.2 on GT-i9082L?
Click to expand...
Click to collapse
Just dream, one day you'll get it.
Hi dear friends,
My note 2 n7100 stuck in download mode. Odin cannot flash rom. What am i suppose to do?
Thank you
itutu008 said:
Hi dear friends,
My note 2 n7100 stuck in download mode. Odin cannot flash rom. What am i suppose to do?
Thank you
Click to expand...
Click to collapse
how is it stuck? no Recovery?
what exactly happened before that?
what does Odin say in the logs when it flashes?
MigoMujahid said:
how is it stuck? no Recovery?
what exactly happened before that?
what does Odin say in the logs when it flashes?
Click to expand...
Click to collapse
It happened by itself. No damage or no wipe etc..
I am puttingbscreen caps.
I hope I can fix this.
MigoMujahid said:
how is it stuck? no Recovery?
what exactly happened before that?
what does Odin say in the logs when it flashes?
Click to expand...
Click to collapse
Also no recovery. I shut off the phone by the button. Then downloading mode opening again.
itutu008 said:
It happened by itself. No damage or no wipe etc..
I am puttingbscreen caps.
I hope I can fix this.
Click to expand...
Click to collapse
you need to add a PIT file to Odin first
just a sec, i will add a link for it.. @itutu008
i found one here:
https://forum.xda-developers.com/attachment.php?attachmentid=1575322&d=1355893688
it's for N7100 16GB variant, not for any other variant
MigoMujahid said:
you need to add a PIT file to Odin first
just a sec, i will add a link for it.. @itutu008
i found one here:
https://forum.xda-developers.com/attachment.php?attachmentid=1575322&d=1355893688
it's for N7100 16GB variant, not for any other variant
Click to expand...
Click to collapse
Thank you very much my friend. I will do it asap and will tell you the result.
MigoMujahid said:
you need to add a PIT file to Odin first
just a sec, i will add a link for it.. @itutu008
i found one here:
https://forum.xda-developers.com/attachment.php?attachmentid=1575322&d=1355893688
it's for N7100 16GB variant, not for any other variant
Click to expand...
Click to collapse
Now,
In Odin, I putted that PIT file to the PIT section and flashed. but it failed again.
itutu008 said:
Now,
In Odin, I putted that PIT file to the PIT section and flashed. but it failed again.
Click to expand...
Click to collapse
what is the new error?
is it about NAND Write failed?
MigoMujahid said:
what is the new error?
Click to expand...
Click to collapse
Something like this. I apologise for wastig your time.
itutu008 said:
Something like this. I apologise for wastig your time.
Click to expand...
Click to collapse
can you add the screen of the error?
just to be sure not to bring wrong news..
no time wasted, don't worry
MigoMujahid said:
can you add the screen of the error?
just to be sure not to bring wrong news..
no time wasted, don't worry
Click to expand...
Click to collapse
This is the error.
itutu008 said:
This is the error.
Click to expand...
Click to collapse
you should flash the PIT with the ROM.
place the ROM in "AP" slot, and the pit in "PIT" slot :good:
MigoMujahid said:
you should flash the PIT with the ROM.
place the ROM in "AP" slot, and the pit in "PIT" slot :good:
Click to expand...
Click to collapse
I did as you told:
itutu008 said:
I did as you told:
Click to expand...
Click to collapse
ok
do you have the N7100 16GB variant​ for sure?
also where did you download the stock ROM?
MigoMujahid said:
ok
do you have the N7100 16GB variant​ for sure?
also where did you download the stock ROM?
Click to expand...
Click to collapse
I downloaded it from Sammobile. Yes I am sure I have 16GB variant.
Date Country/Carrier Version PDA CSC
2015-05-10 Turkey 4.4.2 N7100XXUFNL1 N7100OJVFOD1
itutu008 said:
I downloaded it from Sammobile. Yes I am sure I have 16GB variant.
Date Country/Carrier Version PDA CSC
2015-05-10 Turkey 4.4.2 N7100XXUFNL1 N7100OJVFOD1
Click to expand...
Click to collapse
i read in a thread about the same problem as well, you either need a Firmware with pit file included, or other people say it's a cable issue, you need to change the cable, the cable is probably the problem, i had many Odin errors because of wrong cable.
did you try flashing TWRP recovery and see if it boots?
MigoMujahid said:
i read in a thread about the same problem as well, you either need a Firmware with pit file included, or other people say it's a cable issue, you need to change the cable, the cable is probably the problem, i had many Odin errors because of wrong cable.
did you try flashing TWRP recovery and see if it boots?
Click to expand...
Click to collapse
I tried on different pc with different cable. Nothing change on this screen.
Is it hardware error?
itutu008 said:
I tried on different pc with different cable. Nothing change on this screen.
Is it hardware error?
Click to expand...
Click to collapse
I'm not sure, did you try TWRP as i suggested?
MigoMujahid said:
ok
do you have the N7100 16GB variant​ for sure?
also where did you download the stock ROM?
Click to expand...
Click to collapse
MigoMujahid said:
I'm not sure, did you try TWRP as i suggested?
Click to expand...
Click to collapse
i will do but there is no root access. i tried to root but it did not rooted. i will try without root permission now.
itutu008 said:
i will do but there is no root access. i tried to root but it did not rooted. i will try without root permission now.
Click to expand...
Click to collapse
you don't need root to flash TWRP, there's a .tar file for it that can be flashed with Odin.
After i look around a bit i have managed to simply destroy a really well working j7 2016.
What i have managed to do
-Install TWRP
What i managed to destroy
-Everything
Extra thing i have managed to destroy
-It`s now warranty void (Because i triggered with TWRP i guess that)
I currently have no running ROM Official or non Official on the phone. So the phone if you start it it shows the name i am amazed that he still knows what phone it is and then black screen. I have made that by deleting everything in TWRP because i tough that is a good thing and by everything i mean the whole ROM. Now i am stuck i can enter in TWRP and in Download mode but none of the ROMS official or custom i can`t install.
What i have tried
-Install custom rom (does nothing)
-Install official rom (it does not let me because it`s something about secure check fail) (bootloader)
I can`t find a ROM or what is the official name of a file that has all the required files to get the phone up and running again.
In odin you don`t need files for every checkbox ? (BL AP CP CSC UMS) ? I`ve tried to put the official J710FNDDU1BQI2_J710FNODD1BQI2_J710FNDDU1BQH7_HOME.tar just on AP and it does not work. Actually nothing is working.
What i can still do
Put the phone in Download mode
Put the phone in TWRP
I don`t know what i can do next to fix this big pile of **** i done to myself because i was bored! HELP?
ntzntz said:
-Install official rom (it does not let me because it`s something about secure check fail) (bootloader)
I can`t find a ROM or what is the official name of a file that has all the required files to get the phone up and running again.
Click to expand...
Click to collapse
you need to download and flash using latest official ROM. the below link is for sm-j710f taken from https://repairmymobile.in/flash/samsung-sm-j710f-2016-flash-file/
http://www.mediafire.com/file/r06qrgl785k7kja/SM-J710F_1__J710FOJV4BRA1+%28Repairmymobile.in%29.zip
use odin and flash. it will work !!
I`ve just downloaded to try again this https://forum.xda-developers.com/galaxy-j7/samsung-galaxy-j7-2016-exynos-7870-guides-development-and-mods/rom-j7-2016-stock-rom-build-date-7th-t3515491 and i have selected with ODIN each file for each tab and i get this : SW REV. Check Fail Device:5 Binary:2
ntzntz said:
I`ve just downloaded to try again this https://forum.xda-developers.com/ga...rom-j7-2016-stock-rom-build-date-7th-t3515491 and i have selected with ODIN each file for each tab and i get this : SW REV. Check Fail Device:5 Binary:2
Click to expand...
Click to collapse
It's mean you Firmware Bootloader is lower version that you current Bootloader version you use... To fix it you must find newer firmware from you firmware country... Or find full pack firmware...
sandeepkumar0153 said:
you need to download and flash using latest official ROM. the below link is for sm-j710f taken from https://repairmymobile.in/flash/samsung-sm-j710f-2016-flash-file/
http://www.mediafire.com/file/r06qrgl785k7kja/SM-J710F_1__J710FOJV4BRA1+%28Repairmymobile.in%29.zip
use odin and flash. it will work !!
Click to expand...
Click to collapse
Your version got me this error : SW Rev. Check fail Device : 5 Binary 4
So no working
Okay so in that case have you tried the samsung switch app on pc. I had exactly the same problems you facing. It downloads the latest stock rom.
This is mine from there.
This one seems to be latest stock rom. Its BRD5 build
https://forum.xda-developers.com/ga...evelopment-and-mods/rom-elite-rom-v5-t3787288
sandeepkumar0153 said:
Okay so in that case have you tried the samsung switch app on pc. I had exactly the same problems you facing. It downloads the latest stock rom.
This is mine from there.
Click to expand...
Click to collapse
Are you really trying to help me or give me random program and links. Samsung switch app it`s for transfering files from another phone to your current phone. It does not have anything to do with restoring the device.
ntzntz said:
Are you really trying to help me or give me random program and links. Samsung switch app it`s for transfering files from another phone to your current phone. It does not have anything to do with restoring the device.
Click to expand...
Click to collapse
Old version Smart Switch works for Download lastest Firmware... But in new version, This feature no longer available
Sent from my j7xelte using XDA Labs
ntzntz said:
Are you really trying to help me or give me random program and links. Samsung switch app it`s for transfering files from another phone to your current phone. It does not have anything to do with restoring the device.
Click to expand...
Click to collapse
Im really really trying to help you. It has a emergency recovery system that restores to stocl if something fails while installing a rom or no boot.
It seems im doing your work which you could have easily googled up.
The rom with BRD5 build will work 100%
---------- Post added at 07:52 PM ---------- Previous post was at 07:50 PM ----------
vinsenliu said:
Old version Smart Switch works for Download lastest Firmware... But in new version, This feature no longer available
Click to expand...
Click to collapse
There is, you probably didnt try. I always use it to download rom as other websites for stock rom are slow or wants me to signup.
sandeepkumar0153 said:
There is, you probably didnt try. I always use it to download rom as other websites for stock rom are slow or wants me to signup.
Click to expand...
Click to collapse
Before Samsung Remove that feature, i always using Smart Switch to Download Firmware and Copy firmware to my hard drive... So, sadly Samsung remove this feature... I like download from smart switch than other website... I don't know if old version still work...
Sent from my j7xelte using XDA Labs
sandeepkumar0153 said:
Im really really trying to help you. It has a emergency recovery system that restores to stocl if something fails while installing a rom or no boot.
It seems im doing your work which you could have easily googled up.
The rom with BRD5 build will work 100%
---------- Post added at 07:52 PM ---------- Previous post was at 07:50 PM ----------
There is, you probably didnt try. I always use it to download rom as other websites for stock rom are slow or wants me to signup.
Click to expand...
Click to collapse
Can you tell me what version exactly ? Because the last version is doing nothing. If you think by now i did not tried several things from google you are wrong ! I even tried Keis and that program has something there but it`s not connecting with my phone
vinsenliu said:
Before Samsung Remove that feature, i always using Smart Switch to Download Firmware and Copy firmware to my hard drive... So, sadly Samsung remove this feature... I like download from smart switch than other website... I don't know if old version still work...
Click to expand...
Click to collapse
Its there in the new version, try it when you can. I have downloaded mine this month. Thats how i got the BDR4 build.
sandeepkumar0153 said:
Its there in the new version, try it when you can. I have downloaded mine this month. Thats how i got the BDR4 build.
Click to expand...
Click to collapse
Hmmm.. oke i will try
ntzntz said:
Can you tell me what version exactly ? Because the last version is doing nothing. If you think by now i did not tried several things from google you are wrong ! I even tried Keis and that program has something there but it`s not connecting with my phone
Click to expand...
Click to collapse
What your device country?
Sent from my j7xelte using XDA Labs
ntzntz said:
Can you tell me what version exactly ? Because the last version is doing nothing. If you think by now i did not tried several things from google you are wrong ! I even tried Keis and that program has something there but it`s not connecting with my phone
Click to expand...
Click to collapse
Kies doesn't work with this phone. Scroll up i have linked to a xda forum which is Elite rom. Its stock and would work in your case. Just flash and enjoy.
vinsenliu said:
Hmmm.. oke i will try
What your device country?
Sent from my j7xelte using XDA Labs
Click to expand...
Click to collapse
Romania
ntzntz said:
Romania
Click to expand...
Click to collapse
What you device type? F or FN or something else?
UPDATE: I find info about J7 2016 in Samsung Romania Site and they say your type is SM-J710FN... So try flash this... This firmwate from INS (India) but maybe it works for your phone...
https://updato.com/firmware-archive-select-model?record=32052AB4517D11E89F15FA163EE8F90B
Keep relax for fix this problem... Device 5 binary 4 cause sbin...
Source: updato.com
Sent from my j7xelte using XDA Labs
ntzntz said:
Romania
Click to expand...
Click to collapse
Download samfirm 0.3.6 here and use this:
Model: SM-J710FN
Region: SER
PDA: J710FXXS5BRC2
CSC: J710FOXY4BQL3
Phone: J710FXXU5BRC3
Load the file after you have extracted the zip in ap in odin and flash it.
Firmware is from Russia but you wont find on net any for Romania but it works just fine.
Cheers.
vinsenliu said:
What you device type? F or FN or something else?
UPDATE: I find info about J7 2016 in Samsung Romania Site and they say your type is SM-J710FN... So try flash this... This firmwate from INS (India) but maybe it works for your phone...
https://updato.com/firmware-archive-select-model?record=32052AB4517D11E89F15FA163EE8F90B
Keep relax for fix this problem... Device 5 binary 4 cause sbin...
Source: updato.com
Sent from my j7xelte using XDA Labs
Click to expand...
Click to collapse
Oh my that did work. It took me forever to download but it worked. Right now i wait on the phone too boot for the first time. Thank you a lot!
Thanks
ntzntz said:
Oh my that did work. It took me forever to download but it worked. Right now i wait on the phone too boot for the first time. Thank you a lot!
Thanks
Click to expand...
Click to collapse
Happy to help you... I have same problem too..
Sent from my j7xelte using XDA Labs