After i look around a bit i have managed to simply destroy a really well working j7 2016.
What i have managed to do
-Install TWRP
What i managed to destroy
-Everything
Extra thing i have managed to destroy
-It`s now warranty void (Because i triggered with TWRP i guess that)
I currently have no running ROM Official or non Official on the phone. So the phone if you start it it shows the name i am amazed that he still knows what phone it is and then black screen. I have made that by deleting everything in TWRP because i tough that is a good thing and by everything i mean the whole ROM. Now i am stuck i can enter in TWRP and in Download mode but none of the ROMS official or custom i can`t install.
What i have tried
-Install custom rom (does nothing)
-Install official rom (it does not let me because it`s something about secure check fail) (bootloader)
I can`t find a ROM or what is the official name of a file that has all the required files to get the phone up and running again.
In odin you don`t need files for every checkbox ? (BL AP CP CSC UMS) ? I`ve tried to put the official J710FNDDU1BQI2_J710FNODD1BQI2_J710FNDDU1BQH7_HOME.tar just on AP and it does not work. Actually nothing is working.
What i can still do
Put the phone in Download mode
Put the phone in TWRP
I don`t know what i can do next to fix this big pile of **** i done to myself because i was bored! HELP?
ntzntz said:
-Install official rom (it does not let me because it`s something about secure check fail) (bootloader)
I can`t find a ROM or what is the official name of a file that has all the required files to get the phone up and running again.
Click to expand...
Click to collapse
you need to download and flash using latest official ROM. the below link is for sm-j710f taken from https://repairmymobile.in/flash/samsung-sm-j710f-2016-flash-file/
http://www.mediafire.com/file/r06qrgl785k7kja/SM-J710F_1__J710FOJV4BRA1+%28Repairmymobile.in%29.zip
use odin and flash. it will work !!
I`ve just downloaded to try again this https://forum.xda-developers.com/galaxy-j7/samsung-galaxy-j7-2016-exynos-7870-guides-development-and-mods/rom-j7-2016-stock-rom-build-date-7th-t3515491 and i have selected with ODIN each file for each tab and i get this : SW REV. Check Fail Device:5 Binary:2
ntzntz said:
I`ve just downloaded to try again this https://forum.xda-developers.com/ga...rom-j7-2016-stock-rom-build-date-7th-t3515491 and i have selected with ODIN each file for each tab and i get this : SW REV. Check Fail Device:5 Binary:2
Click to expand...
Click to collapse
It's mean you Firmware Bootloader is lower version that you current Bootloader version you use... To fix it you must find newer firmware from you firmware country... Or find full pack firmware...
sandeepkumar0153 said:
you need to download and flash using latest official ROM. the below link is for sm-j710f taken from https://repairmymobile.in/flash/samsung-sm-j710f-2016-flash-file/
http://www.mediafire.com/file/r06qrgl785k7kja/SM-J710F_1__J710FOJV4BRA1+%28Repairmymobile.in%29.zip
use odin and flash. it will work !!
Click to expand...
Click to collapse
Your version got me this error : SW Rev. Check fail Device : 5 Binary 4
So no working
Okay so in that case have you tried the samsung switch app on pc. I had exactly the same problems you facing. It downloads the latest stock rom.
This is mine from there.
This one seems to be latest stock rom. Its BRD5 build
https://forum.xda-developers.com/ga...evelopment-and-mods/rom-elite-rom-v5-t3787288
sandeepkumar0153 said:
Okay so in that case have you tried the samsung switch app on pc. I had exactly the same problems you facing. It downloads the latest stock rom.
This is mine from there.
Click to expand...
Click to collapse
Are you really trying to help me or give me random program and links. Samsung switch app it`s for transfering files from another phone to your current phone. It does not have anything to do with restoring the device.
ntzntz said:
Are you really trying to help me or give me random program and links. Samsung switch app it`s for transfering files from another phone to your current phone. It does not have anything to do with restoring the device.
Click to expand...
Click to collapse
Old version Smart Switch works for Download lastest Firmware... But in new version, This feature no longer available
Sent from my j7xelte using XDA Labs
ntzntz said:
Are you really trying to help me or give me random program and links. Samsung switch app it`s for transfering files from another phone to your current phone. It does not have anything to do with restoring the device.
Click to expand...
Click to collapse
Im really really trying to help you. It has a emergency recovery system that restores to stocl if something fails while installing a rom or no boot.
It seems im doing your work which you could have easily googled up.
The rom with BRD5 build will work 100%
---------- Post added at 07:52 PM ---------- Previous post was at 07:50 PM ----------
vinsenliu said:
Old version Smart Switch works for Download lastest Firmware... But in new version, This feature no longer available
Click to expand...
Click to collapse
There is, you probably didnt try. I always use it to download rom as other websites for stock rom are slow or wants me to signup.
sandeepkumar0153 said:
There is, you probably didnt try. I always use it to download rom as other websites for stock rom are slow or wants me to signup.
Click to expand...
Click to collapse
Before Samsung Remove that feature, i always using Smart Switch to Download Firmware and Copy firmware to my hard drive... So, sadly Samsung remove this feature... I like download from smart switch than other website... I don't know if old version still work...
Sent from my j7xelte using XDA Labs
sandeepkumar0153 said:
Im really really trying to help you. It has a emergency recovery system that restores to stocl if something fails while installing a rom or no boot.
It seems im doing your work which you could have easily googled up.
The rom with BRD5 build will work 100%
---------- Post added at 07:52 PM ---------- Previous post was at 07:50 PM ----------
There is, you probably didnt try. I always use it to download rom as other websites for stock rom are slow or wants me to signup.
Click to expand...
Click to collapse
Can you tell me what version exactly ? Because the last version is doing nothing. If you think by now i did not tried several things from google you are wrong ! I even tried Keis and that program has something there but it`s not connecting with my phone
vinsenliu said:
Before Samsung Remove that feature, i always using Smart Switch to Download Firmware and Copy firmware to my hard drive... So, sadly Samsung remove this feature... I like download from smart switch than other website... I don't know if old version still work...
Click to expand...
Click to collapse
Its there in the new version, try it when you can. I have downloaded mine this month. Thats how i got the BDR4 build.
sandeepkumar0153 said:
Its there in the new version, try it when you can. I have downloaded mine this month. Thats how i got the BDR4 build.
Click to expand...
Click to collapse
Hmmm.. oke i will try
ntzntz said:
Can you tell me what version exactly ? Because the last version is doing nothing. If you think by now i did not tried several things from google you are wrong ! I even tried Keis and that program has something there but it`s not connecting with my phone
Click to expand...
Click to collapse
What your device country?
Sent from my j7xelte using XDA Labs
ntzntz said:
Can you tell me what version exactly ? Because the last version is doing nothing. If you think by now i did not tried several things from google you are wrong ! I even tried Keis and that program has something there but it`s not connecting with my phone
Click to expand...
Click to collapse
Kies doesn't work with this phone. Scroll up i have linked to a xda forum which is Elite rom. Its stock and would work in your case. Just flash and enjoy.
vinsenliu said:
Hmmm.. oke i will try
What your device country?
Sent from my j7xelte using XDA Labs
Click to expand...
Click to collapse
Romania
ntzntz said:
Romania
Click to expand...
Click to collapse
What you device type? F or FN or something else?
UPDATE: I find info about J7 2016 in Samsung Romania Site and they say your type is SM-J710FN... So try flash this... This firmwate from INS (India) but maybe it works for your phone...
https://updato.com/firmware-archive-select-model?record=32052AB4517D11E89F15FA163EE8F90B
Keep relax for fix this problem... Device 5 binary 4 cause sbin...
Source: updato.com
Sent from my j7xelte using XDA Labs
ntzntz said:
Romania
Click to expand...
Click to collapse
Download samfirm 0.3.6 here and use this:
Model: SM-J710FN
Region: SER
PDA: J710FXXS5BRC2
CSC: J710FOXY4BQL3
Phone: J710FXXU5BRC3
Load the file after you have extracted the zip in ap in odin and flash it.
Firmware is from Russia but you wont find on net any for Romania but it works just fine.
Cheers.
vinsenliu said:
What you device type? F or FN or something else?
UPDATE: I find info about J7 2016 in Samsung Romania Site and they say your type is SM-J710FN... So try flash this... This firmwate from INS (India) but maybe it works for your phone...
https://updato.com/firmware-archive-select-model?record=32052AB4517D11E89F15FA163EE8F90B
Keep relax for fix this problem... Device 5 binary 4 cause sbin...
Source: updato.com
Sent from my j7xelte using XDA Labs
Click to expand...
Click to collapse
Oh my that did work. It took me forever to download but it worked. Right now i wait on the phone too boot for the first time. Thank you a lot!
Thanks
ntzntz said:
Oh my that did work. It took me forever to download but it worked. Right now i wait on the phone too boot for the first time. Thank you a lot!
Thanks
Click to expand...
Click to collapse
Happy to help you... I have same problem too..
Sent from my j7xelte using XDA Labs
Related
Hi Men
After the attempt to install via Odin the firmware I8150XXLMB my 8150 continuously reboot and on the screen cyclically appear the Samsung logo.
With a long press on the power button I can switch off the phone but if switched on the phone starts, introduce itself, gives out the Samsung sound, the Samsung logo appears but after that the boot sequence restarts from the Samsung logo.
I can go in download mode, Odin recognize the Phone, the attempt to upload a new firmware can be performed but as described above the boot sequence never ends.
I took out the battery without any results and obviously the connection with Kies did not succeed.
Do you have any suggestion?
Thanks in advance
Are you sure you have the right firmware , is your region code correct ?
Yes I am sure, I am based in Europe and the firmware was released for Germany, it worked fine in the past on my phpne, I got the problem while installing it over REMICS ROM FOR Galaxy W I8150
12alex21 said:
Are you sure you have the right firmware , is your region code correct ?
Click to expand...
Click to collapse
GiulyR1 said:
Yes I am sure, I am based in Europe and the firmware was released for Germany, it worked fine in the past on my phpne, I got the problem while installing it over REMICS ROM FOR Galaxy W I8150
Click to expand...
Click to collapse
So i'm based in germany and have a german device I am using
I8150XXLA2_I8150DBTKJ1_I8150XXKL3_HOME.tar
What options have you checked ?
everything should work using this :
http: // mygalaxywonder.blogspot.com/2012/07/how-to-flash-and-install-stock-rom.html (i am to new to post links)
which vesion of odin are you using ?
mine is v4.43
I choosed One package option and used Odin v4.43
Maybe the solution is trying to install a multi package firmware, but I do not know were to find it out
12alex21 said:
So i'm based in germany and have a german device I am using
I8150XXLA2_I8150DBTKJ1_I8150XXKL3_HOME.tar
What options have you checked ?
everything should work using this :
http: // mygalaxywonder.blogspot.com/2012/07/how-to-flash-and-install-stock-rom.html (i am to new to post links)
which vesion of odin are you using ?
mine is v4.43
Click to expand...
Click to collapse
GiulyR1 said:
I choosed One package option and used Odin v4.43
Maybe the solution is trying to install a multi package firmware, but I do not know were to find it out
Click to expand...
Click to collapse
i think you simply have to unchek onpackage
Thanks for the suggestion, but I am not so sure that it works for me as I was istalling a .md5 package
12alex21 said:
i think you simply have to unchek onpackage
Click to expand...
Click to collapse
did the flashing finished?
Sent from my GT-I8150 using xda premium
Yes it did, the ODIN proces arrived to the end.
hadidjapri said:
did the flashing finished?
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
Try this one here
hope it could be your help
This worked for me :
http://forum.xda-developers.com/showthread.php?t=1467128
12alex21 said:
This worked for me :
http://forum.xda-developers.com/showthread.php?t=1467128
Click to expand...
Click to collapse
good work.
There is a new firmware out that I'm running on my F320 now. Its F320K11a completely stock. However its a update.zip flash, so you need to install recovery and then flash it. I have flashed this over a F320S and L Model no problems. So its safe to say it will work on all F320's make a CWM backup first and place in on your hard drive just incase.
Changes include now in the menu nav settings you can now high the menu buttons for most apps.
Source and download
Its a 2.1GB download
Thanks for that my friend,we do need some love for our korean variants also lol
The download is 1.9gb for me and the name file is F320_11A_CUSTOM_ROM.rar
I hope im not downloading a wrong one...
But is this a Stock update from LG Korea or a custom rom ?
Sent from my LG-F320K using XDA Premium 4 mobile app
wolfgart said:
But is this a Stock update from LG Korea or a custom rom ?
Sent from my LG-F320K using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes the korean model needs some love, really its the best version with a removable battery and mircosd support
Its not a custom rom, I've installed its stock carrier F32oK Olleh firmware 11A, it just installed like a custom rom as its not a KDZ but a update.zip
You need the CWM touch mod apk installer here to install it. You should make a cwm backup to an external source before flashing the update zip. And later factory reset if your coming from F320L or F320S to stop and errors.
Hendrickson said:
Its not a custom rom, I've installed its stock Olleh firmware 11A, it just installed like a custom rom as its not a KDZ but a update.zip
Click to expand...
Click to collapse
Greaaaat !!!!
I love so much Korean variant F320K. Is the best variant of others in the world !!!!
Sent from my LG-F320K using XDA Premium 4 mobile app
I already have the touch recover on the phone.Will i need to reinstall it again after the flashing?
woof123 said:
I already have the touch recover on the phone.Will i need to reinstall it again after the flashing?
Click to expand...
Click to collapse
Not sure, which recovery are you using? I can test for you. If I install it I loose my mircosd card paths and can access my sd.
Open recovery,its ok tho i did it already now i need to see how it goes lol
There was no need of a clean set up tho,it s an otan so its supposed to go above any firmware.No problems or errors so far and i kept all my files and setting intact.
guys , i 've installed .11a from TWRP recovery , this is fully compatible .
Use TWRP http://techerrata.com/browse/twrp2/g2kor
woof123 said:
Open recovery,its ok tho i did it already now i need to see how it goes lol
There was no need of a clean set up tho,it s an otan so its supposed to go above any firmware.No problems or errors so far and i kept all my files and setting intact.
Click to expand...
Click to collapse
Any tips on how you installed Open recovery? I tried to install it with the info here. When I reboot into recovery its a blank screen and if i connect a usb cable windows wants to format various drives
Looks like a nice feature but if the button's are hidden how do we go back or press menu ??
Hendrickson said:
Any tips on how you installed Open recovery? I tried to install it with the info here. When I reboot into recovery its a blank screen and if i connect a usb cable windows wants to format various drives
Click to expand...
Click to collapse
My friend its super easy i just used flashify....And i opened the file with the recovery image tab.Thats it it only took 2 sec max...
varunkumars said:
Looks like a nice feature but if the button's are hidden how do we go back or press menu ??
Click to expand...
Click to collapse
There is a little tab in the middle you click to bring up the menu again.....
woof123 said:
My friend its super easy i just used flashify....And i opened the file with the recovery image tab.Thats it it only took 2 sec max...
Click to expand...
Click to collapse
Also tried this and same result. My phone is a F320L originally, I take it yours is a F320K?
Hendrickson said:
There is a little tab in the middle you click to bring up the menu again.....
Also tried this and same result. My phone is a F320L originally, I take it yours is a F320K?
Click to expand...
Click to collapse
No Its the S model that its practicaly the same with L or so i think...Cause inside when i open the case it says F320s/l
custom rom
did anyone else notice the link to the flashable custom rom foe f320
http://optimusforums.com/threads/first-custom-rom-for-lg-g2-f320.9029/
I am going to try it.
This rom is older than this one tho...
woof123 said:
This rom is older than this one tho...
Click to expand...
Click to collapse
FYI there is a new leaked rom now 11c http://optimusforums.com/threads/new-firmware-f320k11c-update-zip-for-twrp-or-cwm.9146/unread
Hendrickson said:
FYI there is a new leaked rom now 11c http://optimusforums.com/threads/new-firmware-f320k11c-update-zip-for-twrp-or-cwm.9146/unread
Click to expand...
Click to collapse
Installed and running 11C on my F320K ...
wolfgart said:
Installed and running 11C on my F320K ...
Click to expand...
Click to collapse
Hi I am using G2 f320k however the firmwire was still 10M and try to update the stock rom through thr OTA but it can't. Are there any method to upgrade it ?
ericj said:
Hi I am using G2 f320k however the firmwire was still 10M and try to update the stock rom through thr OTA but it can't. Are there any method to upgrade it ?
Click to expand...
Click to collapse
The latest K11C firmware leaked release dated 24th of Sept. Its an update.zip within the rar file so flash via twrp or cwm and remember to wipe/factory reset to stop any errors. (Always backup too)
Mirror: Google docs https://docs.google.com/file/d/0BwkUUmb8s5kQQnZ2STJWNWJzc0k/edit?usp=sharing
hey guys I am developer and I got a bricked note 2.
If I go to philz touch recovery it says cant mount stuff and I cant flash anything.
In Odin it says Complete(write) operation failed.
Is my internal storage dead ?
same issue: http://www.sammobile.com/forum/showthread.php?t=23014&page=3
AndrolinRoot said:
hey guys I am developer and I got a bricked note 2.
If I go to philz touch recovery it says cant mount stuff and I cant flash anything.
In Odin it says Complete(write) operation failed.
Is my internal storage dead ?
same issue: http://www.sammobile.com/forum/showthread.php?t=23014&page=3
Click to expand...
Click to collapse
Would you share what you've tried to flash with Odin and what has been your last firmware, bootloader?
Androidwizzard said:
Would you share what you've tried to flash with Odin and what has been your last firmware, bootloader?
Click to expand...
Click to collapse
I was on the cm nightly and than it did not start after some months. I tried to flash a lot of different stock roms and also tried different pit files. Seems to me like my internal sd is dead
AndrolinRoot said:
I was on the cm nightly and than it did not start after some months. I tried to flash a lot of different stock roms and also tried different pit files. Seems to me like my internal sd is dead
Click to expand...
Click to collapse
I've asked for firmware/bootloader, not last custom rom. Last firmware is important to know to give an advice.
What stock roms have you tried?
Another option is to restore using Kies, tried?
Androidwizzard said:
I've asked for firmware/bootloader, not last custom rom. Last firmware is important to know to give an advice.
What stock roms have you tried?
Another option is to restore using Kies, tried?
Click to expand...
Click to collapse
Tried kies emergency restore but failes aswell.
I think I had 4.2 on it before.
AndrolinRoot said:
Tried kies emergency restore but failes aswell.
I think I had 4.2 on it before.
Click to expand...
Click to collapse
Only reasonable chance I see is to flash any firmware above 4.2 through Odin. Mj5 (4.3) to NL1 (4.4.2)
Androidwizzard said:
Only reasonable chance I see is to flash any firmware above 4.2 through Odin. Mj5 (4.3) to NL1 (4.4.2)
Click to expand...
Click to collapse
Could you link me to one please ? Does it matter which odin version I use ? And also a link to a pit file would be nice !
Thank you
AndrolinRoot said:
Could you link me to one please ? Does it matter which odin version I use ? And also a link to a pit file would be nice !
Thank you
Click to expand...
Click to collapse
Odin 3.09 is actual version and firmware you get HERE.
If I remember correctly there has been a change in partitions with Android 4.3, so hopefully not more than the firmware will be needed.
Androidwizzard said:
Odin 3.09 is actual version and firmware you get HERE.
If I remember correctly there has been a change in partitions with Android 4.3, so hopefully not more than the firmware will be needed.
Click to expand...
Click to collapse
I assume you can enter download mode. When doing so, what do you see in the top left corner? If you DONT see a product name then i believe that means you have a failure.
If you DO see a product name then that's another question i am trying to figure out as well
Thanks
grwalker said:
I assume you can enter download mode. When doing so, what do you see in the top left corner? If you DONT see a product name then i believe that means you have a failure.
If you DO see a product name then that's another question i am trying to figure out as well
Thanks
Click to expand...
Click to collapse
I see the product name of the note 2
AndrolinRoot said:
I see the product name of the note 2
Click to expand...
Click to collapse
Then i believe you dont have the classic SDS issue. In that case the product name is blank.
I also have the same issue. No matter what i try (Kies or Odin) everything fails.
I sent the phone to a technician (http://gsm-technix.de/shop/) and he says the emmc chip has failed which he cant fix. Perhaps you have the same issue. But i cannot get absoulte answers if my (and your) symptoms are an SDS
Thanks
grwalker said:
Then i believe you dont have the classic SDS issue. In that case the product name is blank.
I also have the same issue. No matter what i try (Kies or Odin) everything fails.
I sent the phone to a technician (http://gsm-technix.de/shop/) and he says the emmc chip has failed which he cant fix. Perhaps you have the same issue. But i cannot get absoulte answers if my (and your) symptoms are an SDS
Thanks
Click to expand...
Click to collapse
I guess the problem is battery
AndrolinRoot said:
I guess the problem is battery
Click to expand...
Click to collapse
How do you conclude it is the battery that is the problem?
grwalker said:
How do you conclude it is the battery that is the problem?
Click to expand...
Click to collapse
because its not charging and recovery always shows 91% battery.
AndrolinRoot said:
because its not charging and recovery always shows 91% battery.
Click to expand...
Click to collapse
So you can enter recovery?
Can you post some screenshots of the issue please?
Figured since it's a brand new OS (Marshmallow; 6.0), it'd be nice to have a thread with all info on root/mods/recovery/ROMs/etc. Share your info guys on what works/doesn't work! :good:
1. First and foremost, the MM 6.0 100% stock TAR. Thanks so much @Sunderwear
2. Sadly, we still do not have a recovery that supports this new update (the TWRP 3.0 doesn't work unfortunately).
3. Root by flashing this TWRP in Odin, then flashing SuperSu 2.68 in recovery!
4. No mods/ROMs yet for Sprint S6 MM.
Has anyone got root already ?
Sent from my SM-G920P using XDA Free mobile app
albaniandroid said:
Has anyone got root already ?
Sent from my SM-G920P using XDA Free mobile app
Click to expand...
Click to collapse
http://forum.xda-developers.com/sprint-galaxy-s6/general/root-marshmallow-6-0-update-t3333547
anyone living outside of US loses their signal after updating to MM 6.0.1?
i flashed back the stock 5.1.1 OL1 freshly, then updated to MM 6.0.1 right away without installing anything.
anything went right except no signal. i cant make call or sms...
All you should have to do is flash TWRP in Odin...which is still compatible with the update and then flash SuperSU 2.68.
Euronymous88 said:
All you should have to do is flash TWRP in Odin...which is still compatible with the update and then flash SuperSU 2.68.
Click to expand...
Click to collapse
I tried to flash the recovery. How long did it sit on the boot before the recovery started?
have you been able to fix this yet??
yaibakt said:
anyone living outside of US loses their signal after updating to MM 6.0.1?
i flashed back the stock 5.1.1 OL1 freshly, then updated to MM 6.0.1 right away without installing anything.
anything went right except no signal. i cant make call or sms...
Click to expand...
Click to collapse
not yet
yaibakt said:
not yet
Click to expand...
Click to collapse
Have you tried to select GSM/UMTS only in network setting?
yaibakt said:
not yet
Click to expand...
Click to collapse
Damn! wonder if that's gonna happen to me, I live outside the US as well! and I'm just donwloading the update now!
lilila said:
Have you tried to select GSM/UMTS only in network setting?
Click to expand...
Click to collapse
yes i did, but it didnt work for me.
I live outside us and i can make calls and sms
Sent from my SM-G920P using XDA Free mobile app
Tried flashing twrp stays at recovery is not seandroid enforcing. Is there a way to boot into recovery yet?
migue7d said:
Damn! wonder if that's gonna happen to me, I live outside the US as well! and I'm just donwloading the update now!
Click to expand...
Click to collapse
me too, i can't make call and sms, i'm staying Vietnam.
weirdfate said:
I tried to flash the recovery. How long did it sit on the boot before the recovery started?
Click to expand...
Click to collapse
Have you tried going to options in Odin and turning off the auto reboot feature first before flashing TWRP. And then when it says pass...you manually reboot into TWRP...by holding the volume down and power button until it turns off and then hold the button combo for recovery.
Euronymous88 said:
Have you tried going to options in Odin and turning off the aut reboot feature firsr before flashing TWRP. And then when it says pass...you manually reboot into TWRP...by holding the volume down and power button until it turns off and then hold the button combo for recovery.
Click to expand...
Click to collapse
Exactly bud restarted manually after odin twrp 3.0 it stayed at that screen recovery is not seandroid. I waited a few minutes. Maybe not long enough but dont want start over before work. Then had to re odin the MM md5 file.
I emailed twrp. Doesnt mean were gonna get a fix rite away but i feel better that i let them know even if they already knew
albaniandroid said:
I live outside us and i can make calls and sms
Sent from my SM-G920P using XDA Free mobile app
Click to expand...
Click to collapse
So after upgrading to MM, voice and sms still works for you without any changes or tweaks?
So ive been running the teamspr rom and my device wont download the ota. Is there a way to get it to work without needed a pc? Thanks
Sent from my SM-G920P using XDA Free mobile app
yes it works , i live in Albania ( europe ) and everything works perfectly
lilila said:
So after upgrading to MM, voice and sms still works for you without any changes or tweaks?
Click to expand...
Click to collapse
---------- Post added at 03:15 PM ---------- Previous post was at 03:13 PM ----------
you have to unroot it , and you will get OTA . I did this yesterday I had teamspr rom , flashed stock and got OTA
bowhunt2005 said:
So ive been running the teamspr rom and my device wont download the ota. Is there a way to get it to work without needed a pc? Thanks
Sent from my SM-G920P using XDA Free mobile app
Click to expand...
Click to collapse
---------- Post added at 03:15 PM ---------- Previous post was at 03:15 PM ----------
bowhunt2005 said:
So ive been running the teamspr rom and my device wont download the ota. Is there a way to get it to work without needed a pc? Thanks
Sent from my SM-G920P using XDA Free mobile app
Click to expand...
Click to collapse
Hi Guys
After I've rooted the phone I can't open the Camera, I can't Transfer files from PC through USB, I can't Turn on the Bluetooth...Etc
Please help me on this issues like are there a way to install drivers or anything?
Thanks in advance
GT-N7100
4.4.2
Help pls!
Yes. you need Odin.
If you want install TWRP and flash some of the ROMs on xda.
http://www.twrp.me
Else install Odin on your PC and flash firmware.
http://www.sammobile.com
Option58 said:
Yes. you need Odin.
If you want install TWRP and flash some of the ROMs on xda.
http://www.twrp.me
Else install Odin on your PC and flash firmware.
http://www.sammobile.com
Click to expand...
Click to collapse
Thanks for replying about flashing ROMs will that erase my data?
mohdhasan3 said:
Thanks for replying about flashing ROMs will that erase my data?
Click to expand...
Click to collapse
Yes., unfortunately. Don't know about Odin.
Option58 said:
Yes., unfortunately.
Click to expand...
Click to collapse
............. Ok thanks for everything simple and fast and hopefully works! Thanks
mohdhasan3 said:
............. Ok thanks for everything simple and fast and hopefully works! Thanks
Click to expand...
Click to collapse
It will work. Don't worry.
Next time you root install TWRP using Odin and flash SuperSU.zip
If you want to mess with your device and be safe TWRP is the key.
Option58 said:
It will work. Don't worry.
Next time you root install TWRP using Odin and flash SuperSU.zip
Click to expand...
Click to collapse
YES SIR! If only I got it early T_T
@Option58 But wait what about that Auto Root I used CFAuto Root is it ok? its intalled through Odin v3.07 through PDA button.
This is the site
https://autoroot.chainfire.eu/
mohdhasan3 said:
@Option58 But wait what about that Auto Root I used CFAuto Root ig is it ok?
Click to expand...
Click to collapse
I don't know what that is, sorry. But I just told you the best way.
If you want to root select flash zip and UPDATE-SuperSU-v2.46.zip.
Just install TWRP and everything will be super easy and safe.
Through Odin. https://dl.twrp.me/t03g/twrp-3.0.2-0-t03g.img.tar
But now that you are deleting data (if you are) I recommend just flashing either Eclipse v9 (That is Touchwiz KitKat) or Nougat AOSP based ROM Cyanogenmod 14.1. Samsung unchanged is very outdated and bad in 2016.
Option58 said:
I don't know what that is, sorry. But I just told you the best way.
If you want to root select flash zip and UPDATE-SuperSU-v2.46.zip.
Just install TWRP and everything will be super easy and safe.
Through Odin. https://dl.twrp.me/t03g/twrp-3.0.2-0-t03g.img.tar
But now that you are deleting data (if you are) I recommend just flashing either Eclipse v9 (That is Touchwiz KitKat) or Nougat AOSP based ROM Cyanogenmod 14.1. Samsung unchanged is very outdated and bad in 2016.
Click to expand...
Click to collapse
Hmmm could explain to me how to flash a ROM again in small details hehe.... I've TWRP installed latest version ig. Thanks!
mohdhasan3 said:
Hmmm could explain to me how to flash a ROM again in small details hehe.... I've TWRP installed latest version ig. Thanks!
Click to expand...
Click to collapse
Just go to TWRP and everything will be super easy then. I'll guide you. First make a backup in TWRP. Only of EFS since the rest is already broken now. You actually won't lose your pictures and movies, just apps and settings. Now do you want ROM that is perfectly stable Samsung TouchWiz Android 4.4 like you had before (this is already rooted ). Or do you want Android 5.1 AOSP, which is something totally different? (I heard that on is the best AOSP for N7100)? Myself I am on AOSP.
Option58 said:
Just go to TWRP and everything will be super easy then. I'll guide you. First make a backup in TWRP. Only of EFS since the rest is already broken now. You actually won't lose your pictures and movies, just apps and settings. Now do you want ROM that is perfectly stable Samsung TouchWiz Android 4.4 like you had before (this is already rooted ). Or do you want Android 5.1 AOSP, which is something totally different.
Click to expand...
Click to collapse
Wait can I go further than the official v4.4.2? Like going to v6.0 maybe?!
mohdhasan3 said:
Wait can I go further than the official v4.4.2? Like going to v6.0 maybe?!
Click to expand...
Click to collapse
Actually, you can go to Android 7.1. But that is BETA version, 5.1 is stable. I think users with 7.1 are facing random reboots.
Option58 said:
Actually, you can go to Android 7.1. But that is BETA version, 5.1 is stable.
Click to expand...
Click to collapse
OH MY GODDNESS!!!!! WOOOWWWW!!!! 0O0
What's the difference if it was a beta?
mohdhasan3 said:
OH MY GODDNESS!!!!! WOOOWWWW!!!! 0O0
Click to expand...
Click to collapse
So you want that or...?
---------- Post added at 05:57 PM ---------- Previous post was at 05:56 PM ----------
mohdhasan3 said:
What's the difference if it was a beta?
Click to expand...
Click to collapse
They are facing random reboots I think...
Option58 said:
So you want that or...?
---------- Post added at 05:57 PM ---------- Previous post was at 05:56 PM ----------
They are facing random reboots I think...
Click to expand...
Click to collapse
Tough call.... hmmmm DAMMIT LETS DO THE BETA!!!
mohdhasan3 said:
Tough call.... hmmmm DAMMIT LETS DO THE BETA!!!
Click to expand...
Click to collapse
Alright. It's not a call at all as you can switch and choose what you like the most
Are you able to go to TWRP? Backup everything first.
Option58 said:
Alright. It's not a call at all as you can switch and choose what you like the most
Are you able to go to TWRP? Backup everything first.
Click to expand...
Click to collapse
OMG 0_0 u should teach me that pls after we're done ok