Hi Men
After the attempt to install via Odin the firmware I8150XXLMB my 8150 continuously reboot and on the screen cyclically appear the Samsung logo.
With a long press on the power button I can switch off the phone but if switched on the phone starts, introduce itself, gives out the Samsung sound, the Samsung logo appears but after that the boot sequence restarts from the Samsung logo.
I can go in download mode, Odin recognize the Phone, the attempt to upload a new firmware can be performed but as described above the boot sequence never ends.
I took out the battery without any results and obviously the connection with Kies did not succeed.
Do you have any suggestion?
Thanks in advance
Are you sure you have the right firmware , is your region code correct ?
Yes I am sure, I am based in Europe and the firmware was released for Germany, it worked fine in the past on my phpne, I got the problem while installing it over REMICS ROM FOR Galaxy W I8150
12alex21 said:
Are you sure you have the right firmware , is your region code correct ?
Click to expand...
Click to collapse
GiulyR1 said:
Yes I am sure, I am based in Europe and the firmware was released for Germany, it worked fine in the past on my phpne, I got the problem while installing it over REMICS ROM FOR Galaxy W I8150
Click to expand...
Click to collapse
So i'm based in germany and have a german device I am using
I8150XXLA2_I8150DBTKJ1_I8150XXKL3_HOME.tar
What options have you checked ?
everything should work using this :
http: // mygalaxywonder.blogspot.com/2012/07/how-to-flash-and-install-stock-rom.html (i am to new to post links)
which vesion of odin are you using ?
mine is v4.43
I choosed One package option and used Odin v4.43
Maybe the solution is trying to install a multi package firmware, but I do not know were to find it out
12alex21 said:
So i'm based in germany and have a german device I am using
I8150XXLA2_I8150DBTKJ1_I8150XXKL3_HOME.tar
What options have you checked ?
everything should work using this :
http: // mygalaxywonder.blogspot.com/2012/07/how-to-flash-and-install-stock-rom.html (i am to new to post links)
which vesion of odin are you using ?
mine is v4.43
Click to expand...
Click to collapse
GiulyR1 said:
I choosed One package option and used Odin v4.43
Maybe the solution is trying to install a multi package firmware, but I do not know were to find it out
Click to expand...
Click to collapse
i think you simply have to unchek onpackage
Thanks for the suggestion, but I am not so sure that it works for me as I was istalling a .md5 package
12alex21 said:
i think you simply have to unchek onpackage
Click to expand...
Click to collapse
did the flashing finished?
Sent from my GT-I8150 using xda premium
Yes it did, the ODIN proces arrived to the end.
hadidjapri said:
did the flashing finished?
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
Try this one here
hope it could be your help
This worked for me :
http://forum.xda-developers.com/showthread.php?t=1467128
12alex21 said:
This worked for me :
http://forum.xda-developers.com/showthread.php?t=1467128
Click to expand...
Click to collapse
good work.
Related
Hey,
I installed Creed's ROM and after that i updated the software.
But when in rebooted only Samsung Galaxy Y Pro shows up.
What can I do about it
Thanks
rik452 said:
Hey,
I installed Creed's ROM and after that i updated the software.
But when in rebooted only Samsung Galaxy Y Pro shows up.
What can I do about it
Thanks
Click to expand...
Click to collapse
Friend if you installed this on a Galaxy Y Pro then you have certainly "soft" bricked your phone. You will need to reinstall your stock firmware to get it working again. Galaxy Y and Galaxy Y Pro are two completely different phones!!
my phone is galaxy s5360 y
i have same problem!
and
i try to flash with odin but pause on BcmBoot.img in dialogbox!
pleas help me!
Chenda years
dadhp said:
my phone is galaxy s5360 y
i have same problem!
and
i try to flash with odin but pause on BcmBoot.img in dialogbox!
pleas help me!
Click to expand...
Click to collapse
I had the same one day before you and starting odin in admin mode solved this problem for me and also tried another usb port.
---------- Post added at 02:07 AM ---------- Previous post was at 01:53 AM ----------
rik452 said:
Hey,
I installed Creed's ROM and after that i updated the software.
But when in rebooted only Samsung Galaxy Y Pro shows up.
What can I do about it
Thanks
Click to expand...
Click to collapse
and when you don't mean a pro but just our device then wipe data and cache and reboot system
actually if you have a custom ROM like creeds NEVER UPDATE SOFTWARE, cuz it will softbrick the phone due to the fact that the files are modified from the official firmware, doing so will cause either bootloops or splash stuck,
only solution would be to reflash via odin
But if I do Home Power + Volume Up it shows nothing
Found something intresting...
I can go in Download mode for Odin but I don't have the PIT file and the other files if you know were to get them please leave a comment
Is it possible to put ICS 4.0.3 on my Samsung Galaxy Y Pro via Odin?
rik452 said:
Is it possible to put ICS 4.0.3 on my Samsung Galaxy Y Pro via Odin?
Click to expand...
Click to collapse
don't do that, you may end up soft bricking your phone
leodasal2 said:
don't do that, you may end up soft bricking your phone
Click to expand...
Click to collapse
Okay I did'nt but do you know were to get the official files for the GT-B5510 (For The Netherlands) for Odin?
rik452 said:
Okay I did'nt but do you know were to get the official files for the GT-B5510 (For The Netherlands) for Odin?
Click to expand...
Click to collapse
sorry but i have no idea bro, i am using a GT-S5360
ps: don't try to install custom roms for GT-S5360 to your pro because by that you can also soft brick your phone
leodasal2 said:
sorry but i have no idea bro, i am using a GT-S5360
ps: don't try to install custom roms for GT-S5360 to your pro because by that you can also soft brick your phone
Click to expand...
Click to collapse
my phone is already soft bricked
rik452 said:
Okay I did'nt but do you know were to get the official files for the GT-B5510 (For The Netherlands) for Odin?
Click to expand...
Click to collapse
Try in samfirmware.com sammobile.com
Sent from my GT-S6102 using xda premium
manoranjan2050 said:
Try in samfirmware.com sammobile.com
Sent from my GT-S6102 using xda premium
Click to expand...
Click to collapse
I did and downloaded a package and then?
I tried Heimdall but it says something with the header size
hi
excuse me, my english not good
i have problem with updating my galaxy w over kies
when i Connect my devise with kies told my there is a new update
and compllate the step ( update step)
it freezes 99% in download mode
Try USB/Bluetooth/WLAN connection. Also wait when it freezes.
fawzy78 said:
hi
excuse me, my english not good
i have problem with updating my galaxy w over kies
when i Connect my devise with kies told my there is a new update
and compllate the step ( update step)
it freezes 99% in download mode
Click to expand...
Click to collapse
There are two solutions.
1. Use wifi to updates
2. Download update on this forum (under android development) for the region latest ROM. Flash using ODIN.
If this helps, click THANKS
wong.izzat said:
There are two solutions.
1. Use wifi to updates
2. Download update on this forum (under android development) for the region latest ROM. Flash using ODIN.
If this helps, click THANKS
Click to expand...
Click to collapse
How much time it takes to flash it using ODIN
and give me the link
abdulrahman.96m said:
How much time it takes to flash it using ODIN
and give me the link
Click to expand...
Click to collapse
I think it's takes about 15-20 minutes, depending on your PC performance.
And you know, i think you should read ALL Stickies thread in this GT-I8150 forum before you asking for the kind of basic knowledge link like that
no hard feeling, ok mate :thumbup:
Sent from my GT-I8150 using xda app-developers app
Hi! :highfive:
I'm a Galaxy Grand Duos I9082 (Rooted) user and I read that there is a new update for my phone.
But I tried checking it via settings and via KIES but theres no update notification.
Here is the version settings of my phone:
Model: GT-I9082
4.1.2 Stock (Rooted)
AP:I9082XXAMC7
CP: I9082XXAMC4
CSC: I9082JVAMC1
I know there are manual update options but I'm not shure what's the Stock ROM 4.2.2 to flash my phone, or from this Thead
[I9082/I9082L][ROMS][STOCK][FULL][ROOTED][DEODEXED][ZIPALINED]Full samsung roms
which could be my best selections, because as far as i know firmware is for the Middle East and i'm gonna use it on the America Continent (USA, México, Peru, Canada)
Please help. Grettings
Thank you!
Question
I installed jellybean 4.2.2 on my grand and then used chotu touch recovery.tar.md5 on it.
and now as i try to boot into recovery the device just restarts. and i am not even able to gain root rights for it anymore after installing 4.2.2.
Pls help me with this.
abhi3200 said:
I installed jellybean 4.2.2 on my grand and then used chotu touch recovery.tar.md5 on it.
and now as i try to boot into recovery the device just restarts. and i am not even able to gain root rights for it anymore after installing 4.2.2.
Pls help me with this.
Click to expand...
Click to collapse
what steps do u follow while rooting..elaborate..coz chotu222 recovery works very fine..
steps followed
I rooted my device on 4.1.2 using chotu recovery and now I updated the device using kies
Steps followed to root.
1 odinv3.04 and connected phone in downloading mode
2 uploaded file .tar.md5 on pda with auto reboot and f: rest time checked
Started just fine but when tried to boot in cwm recovery phone just restarts every time.
3 tried same unchecking the auto reboot option and took out the battery as read on some xda post. But still didn't work out for me.....
abhi3200 said:
I rooted my device on 4.1.2 using chotu recovery and now I updated the device using kies
Steps followed to root.
1 odinv3.04 and connected phone in downloading mode
2 uploaded file .tar.md5 on pda with auto reboot and f: rest time checked
Started just fine but when tried to boot in cwm recovery phone just restarts every time.
3 tried same unchecking the auto reboot option and took out the battery as read on some xda post. But still didn't work out for me.....
Click to expand...
Click to collapse
Factory reset. ...
From galaxy grand 4.2.2 firmware..
factory reset
I tried factory reset as well.
still no result.
I had many problems upgrading the stock 4.1.2 to the k2wl pre rooted 4.2.2 one, boot loops, no recovery mod and so on. a remark I found on one of the threads solved it, you need to install a stock untouched 4.2.2 via ODIN before upgrading to a 4.2.2 mod, this solved my issues.
Download this firmware.
Here
4.2.2
Pre rooted
Busy box
Init.d support
The jOkEr! said:
Download this firmware.
Here
4.2.2
Pre rooted
Busy box
Init.d support
Click to expand...
Click to collapse
hi a read that Thread but i can't ask there is there no problem if I flash my i9082 with a i9082L ROM hope some could help, tha the initial cuestion :fingers-crossed:
thanks in advance
The jOkEr! said:
Download this firmware.
Here
4.2.2
Pre rooted
Busy box
Init.d support
Click to expand...
Click to collapse
Thanx alot....
It can b flashed using odin... right?
abhi3200 said:
Thanx alot....
It can b flashed using odin... right?
Click to expand...
Click to collapse
No, through cwm. Read the instructions given in the post.
Sent from my GT-I9082 using xda premium
Dude u wrote tht whn it ws on 4.1.2 u rooted it n thn u hav updated it via kies..so it bcame 4.2.2 right.? If so thn u hav actuly updated d firmware....recovery is gon..flash d recovery .tar.md5 file again n thn..
To go in cwm recovery..press power+home+volume up..then it will boot..once u see galaxy grand i9082 written jus leave the power button...let d home n volume key b pressd
Sent from my GT-I9082 using xda app-developers app
akshay27991 said:
Dude u wrote tht whn it ws on 4.1.2 u rooted it n thn u hav updated it via kies..so it bcame 4.2.2 right.? If so thn u hav actuly updated d firmware....recovery is gon..flash d recovery .tar.md5 file again n thn..
To go in cwm recovery..press power+home+volume up..then it will boot..once u see galaxy grand i9082 written jus leave the power button...let d home n volume key b pressd
Sent from my GT-I9082 using xda app-developers app
Click to expand...
Click to collapse
man i tried everything b4 cmng to this forum for discussion its nt my first android device......
i also had orange san francisco i played around with alot.....
can u provide me with the 4.1.2 indian firmware that i can flash using odin....???
abhi3200 said:
Thanx alot....
It can b flashed using odin... right?
Click to expand...
Click to collapse
Nop, you need CWM at the end of the OP say's very clear
PREREQUISITES -
1.Clockworkmod recovery
Click to expand...
Click to collapse
JeSvS said:
Nop, you need CWM at the end of the OP say's very clear
Click to expand...
Click to collapse
u see the problem is that i am not able to install cwm onto the device how will i flash these roms then....
abhi3200 said:
man i tried everything b4 cmng to this forum for discussion its nt my first android device......
i also had orange san francisco i played around with alot.....
can u provide me with the 4.1.2 indian firmware that i can flash using odin....???
Click to expand...
Click to collapse
You mean xolo x 900 first Intel phone
From galaxy grand 4.2.2 firmware..
abhi3200 said:
u see the problem is that i am not able to install cwm onto the device how will i flash these roms then....
Click to expand...
Click to collapse
Untick the autoreboot option when flashing cwm through odin.
After pass, remove battery and restart into cwm recovery by pressing vol. up + home + power button.
Sent from my GT-I9082 using xda premium
First switch off ur phone..then press volume up button,home button and power button together untill samsung logo apper..after that u will in recovery mode..then u see wipe data..click on it ..then click on factory reset..
Sent from my GT-I9082 using xda app-developers app
thank you every1 for ur help i just downgraded the firmware back to 4.1.2 using odin
:good:
The jOkEr! said:
Download this firmware.
Here
4.2.2
Pre rooted
Busy box
Init.d support
Click to expand...
Click to collapse
I'd try those with Indian Latest & Russian 4.2.2 and Latin 4.1.2 I followed all the steps. Clear data/factory reset, Cache partition, Dalvik cache. Flashed the ROM. I did it twice. Still got stuck at boot loop.
Please help !
Well.. somehow I managed every time the phone tries to boot it says GT-s7500
i didnt flash any wrong rom... just install Clockwork Recovery from Google Play and tried to install a recovery from there and then Hell broke loose.
it only boots into recovery but i cant install anything. every package i choose to install gives me some error and the installation aboards. I tried various things but nothing really works...
than I downloaded Odin put the phone in the Downloading Mode.. the problem i have there is that despite the Samsung appears in WIndows Device manager ODIN doesnt see it so that I could restore it from there!
any advice would be really helpfull!!
thanks!!
greek_lover_69 said:
Well.. somehow I managed every time the phone tries to boot it says GT-s7500
i didnt flash any wrong rom... just install Clockwork Recovery from Google Play and tried to install a recovery from there and then Hell broke loose.
it only boots into recovery but i cant install anything. every package i choose to install gives me some error and the installation aboards. I tried various things but nothing really works...
than I downloaded Odin put the phone in the Downloading Mode.. the problem i have there is that despite the Samsung appears in WIndows Device manager ODIN doesnt see it so that I could restore it from there!
any advice would be really helpfull!!
thanks!!
Click to expand...
Click to collapse
Sounds Like You Flashed A Recovery For Samsung Galaxy Ace Plus on your gio!
To Flash VIA Odin, Install Samsung USB Driver For Mobile Phones By @SamHaLeKe :good: and make sure you are not using win 8.1 :fingers-crossed:
Link: http://forum.xda-developers.com/showthread.php?t=961956
waqaswasil said:
Sounds Like You Flashed A Recovery For Samsung Galaxy Ace Plus on your gio!
To Flash VIA Odin, Install Samsung USB Driver For Mobile Phones By @SamHaLeKe :good: and make sure you are not using win 8.1 :fingers-crossed:
Link: http://forum.xda-developers.com/showthread.php?t=961956
Click to expand...
Click to collapse
thats what I did.. but unfortunately ODIN doesnt see my phone...
when I plug the USB into the phone there comes a message saying: "odin oops - usb read transaction failed"
should I try one of the other "unbrick" methods??
thanks!!!
Good Luck!
greek_lover_69 said:
thats what I did.. but unfortunately ODIN doesnt see my phone...
when I plug the USB into the phone there comes a message saying: "odin oops - usb read transaction failed"
should I try one of the other "unbrick" methods??
thanks!!!
Click to expand...
Click to collapse
Remeber that you have to use odin v4.42 only NOT ANY OTHER VERSION!
BTW have you tried Different USB port or Cable??? :fingers-crossed:
waqaswasil said:
Remeber that you have to use odin v4.42 only NOT ANY OTHER VERSION!
BTW have you tried Different USB port or Cable??? :fingers-crossed:
Click to expand...
Click to collapse
well yeah i tried various USB ports... I have managed to do something.. although it is still strange..
I downloaded all ODIN versions... as I sais before the 4.42 didnt see my phone... as any other 4xxxx version...
the only versions that did see my phone when connected were: 1.85 - 1.87 and the 3.09, I repeat 4.42 NOT working...
so tried to flash there... but only errors came up for some reason.... I had downloaded some recoveries for the phone so I tried flashing them. That worked. I got a success.
I tried flashing: stockrecovery-DXKT4-odin.tar
cwm-5.0.2.7-ext4+rfs-odin.tar
cwm-5.0.2.7-ext4only-odin.tar
they were all successfully installed but I just cant flash a firmware,,,, :/
Now when the Phone boots up I get the samsung logo and afer that the yellow exclamation mark!
Though I cant boot in any of the recoveries I previously flashed!!
thank you!!
Redownload gio ops file and try again (use a different source) with ODIN v4.42
waqaswasil said:
use a different pc!!!!
if it doesn't work, maybe @jkoetsier or @belyava can help you
P.S: redownload gio ops file and try again (use a different source)
Click to expand...
Click to collapse
ok i will try it on my laptop tonight and let you know! should I PM them? the persons you mentioned?!
greek_lover_69 said:
ok i will try it on my laptop tonight and let you know! should I PM them? the persons you mentioned?!
Click to expand...
Click to collapse
Not nessesary, as I saw it already.
https://www.dropbox.com/sh/7fruf0tmykh0ggd/AABQiev9XrzNK3MX4mIVy30ka
Try the usb drivers from this link, they should work perfectly. You can use the other files, like the recovery's and gio ops as wel from that link.
Whatever happens to my phone, I use these files to repair my gio and till now, I always succeeded...
Sent from my GT-S5660 using XDA Premium 4 mobile app
If flashing only the recovery doesn't solve your problem, flash stockrom...
Sent from my GT-S5660 using XDA Premium 4 mobile app
jkoetsier said:
If flashing only the recovery doesn't solve your problem, flash stockrom...
Sent from my GT-S5660 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hello! Sure I know that. But as I have said i CANT flash any rom! every time I try to "error" pops up!
Thanks for you files but I still got the same Problem. Odin 4.42 wont recognize my phone! (I have tried various drivers and of course the ones you sent me too)
So if there would be any other solution I would really appreciate! )
greek_lover_69 said:
Hello! Sure I know that. But as I have said i CANT flash any rom! every time I try to "error" pops up!
Thanks for you files but I still got the same Problem. Odin 4.42 wont recognize my phone! (I have tried various drivers and of course the ones you sent me too)
So if there would be any other solution I would really appreciate! )
Click to expand...
Click to collapse
Give Screenshots
waqaswasil said:
Give Screenshots
Click to expand...
Click to collapse
as I told before... 4.42 doesnt even see the phone and on the 1.8x version I can flash any recovery I want but no firmware!!
greek_lover_69 said:
as I told before... 4.42 doesnt even see the phone and on the 1.8x version I can flash any recovery I want but no firmware!!
Click to expand...
Click to collapse
That's not a Gio (S5660) DUDE, That's a Mini 2 (S6500), you need Mini 2 firmware for flashing stock via ODIN (v3.04).
Happy Flashing
P.S: Odin (v4.42) is only for Gio and related models.
waqaswasil said:
That's not a Gio (S5660) DUDE, That's a Mini 2 (S6500), you need Mini 2 firmware for flashing stock via ODIN (v3.04).
Happy Flashing
P.S: Odin (v4.42) is only for Gio and related models.
Click to expand...
Click to collapse
oo my god.. lol... now I feel really stupid.. hahaha... thats not even my phone! and the dude who gave it to me to fix told i was a Gio so I didnt even bother to check the model .. lol... hmmm yeah maybe that will do the trick xD
After i look around a bit i have managed to simply destroy a really well working j7 2016.
What i have managed to do
-Install TWRP
What i managed to destroy
-Everything
Extra thing i have managed to destroy
-It`s now warranty void (Because i triggered with TWRP i guess that)
I currently have no running ROM Official or non Official on the phone. So the phone if you start it it shows the name i am amazed that he still knows what phone it is and then black screen. I have made that by deleting everything in TWRP because i tough that is a good thing and by everything i mean the whole ROM. Now i am stuck i can enter in TWRP and in Download mode but none of the ROMS official or custom i can`t install.
What i have tried
-Install custom rom (does nothing)
-Install official rom (it does not let me because it`s something about secure check fail) (bootloader)
I can`t find a ROM or what is the official name of a file that has all the required files to get the phone up and running again.
In odin you don`t need files for every checkbox ? (BL AP CP CSC UMS) ? I`ve tried to put the official J710FNDDU1BQI2_J710FNODD1BQI2_J710FNDDU1BQH7_HOME.tar just on AP and it does not work. Actually nothing is working.
What i can still do
Put the phone in Download mode
Put the phone in TWRP
I don`t know what i can do next to fix this big pile of **** i done to myself because i was bored! HELP?
ntzntz said:
-Install official rom (it does not let me because it`s something about secure check fail) (bootloader)
I can`t find a ROM or what is the official name of a file that has all the required files to get the phone up and running again.
Click to expand...
Click to collapse
you need to download and flash using latest official ROM. the below link is for sm-j710f taken from https://repairmymobile.in/flash/samsung-sm-j710f-2016-flash-file/
http://www.mediafire.com/file/r06qrgl785k7kja/SM-J710F_1__J710FOJV4BRA1+%28Repairmymobile.in%29.zip
use odin and flash. it will work !!
I`ve just downloaded to try again this https://forum.xda-developers.com/galaxy-j7/samsung-galaxy-j7-2016-exynos-7870-guides-development-and-mods/rom-j7-2016-stock-rom-build-date-7th-t3515491 and i have selected with ODIN each file for each tab and i get this : SW REV. Check Fail Device:5 Binary:2
ntzntz said:
I`ve just downloaded to try again this https://forum.xda-developers.com/ga...rom-j7-2016-stock-rom-build-date-7th-t3515491 and i have selected with ODIN each file for each tab and i get this : SW REV. Check Fail Device:5 Binary:2
Click to expand...
Click to collapse
It's mean you Firmware Bootloader is lower version that you current Bootloader version you use... To fix it you must find newer firmware from you firmware country... Or find full pack firmware...
sandeepkumar0153 said:
you need to download and flash using latest official ROM. the below link is for sm-j710f taken from https://repairmymobile.in/flash/samsung-sm-j710f-2016-flash-file/
http://www.mediafire.com/file/r06qrgl785k7kja/SM-J710F_1__J710FOJV4BRA1+%28Repairmymobile.in%29.zip
use odin and flash. it will work !!
Click to expand...
Click to collapse
Your version got me this error : SW Rev. Check fail Device : 5 Binary 4
So no working
Okay so in that case have you tried the samsung switch app on pc. I had exactly the same problems you facing. It downloads the latest stock rom.
This is mine from there.
This one seems to be latest stock rom. Its BRD5 build
https://forum.xda-developers.com/ga...evelopment-and-mods/rom-elite-rom-v5-t3787288
sandeepkumar0153 said:
Okay so in that case have you tried the samsung switch app on pc. I had exactly the same problems you facing. It downloads the latest stock rom.
This is mine from there.
Click to expand...
Click to collapse
Are you really trying to help me or give me random program and links. Samsung switch app it`s for transfering files from another phone to your current phone. It does not have anything to do with restoring the device.
ntzntz said:
Are you really trying to help me or give me random program and links. Samsung switch app it`s for transfering files from another phone to your current phone. It does not have anything to do with restoring the device.
Click to expand...
Click to collapse
Old version Smart Switch works for Download lastest Firmware... But in new version, This feature no longer available
Sent from my j7xelte using XDA Labs
ntzntz said:
Are you really trying to help me or give me random program and links. Samsung switch app it`s for transfering files from another phone to your current phone. It does not have anything to do with restoring the device.
Click to expand...
Click to collapse
Im really really trying to help you. It has a emergency recovery system that restores to stocl if something fails while installing a rom or no boot.
It seems im doing your work which you could have easily googled up.
The rom with BRD5 build will work 100%
---------- Post added at 07:52 PM ---------- Previous post was at 07:50 PM ----------
vinsenliu said:
Old version Smart Switch works for Download lastest Firmware... But in new version, This feature no longer available
Click to expand...
Click to collapse
There is, you probably didnt try. I always use it to download rom as other websites for stock rom are slow or wants me to signup.
sandeepkumar0153 said:
There is, you probably didnt try. I always use it to download rom as other websites for stock rom are slow or wants me to signup.
Click to expand...
Click to collapse
Before Samsung Remove that feature, i always using Smart Switch to Download Firmware and Copy firmware to my hard drive... So, sadly Samsung remove this feature... I like download from smart switch than other website... I don't know if old version still work...
Sent from my j7xelte using XDA Labs
sandeepkumar0153 said:
Im really really trying to help you. It has a emergency recovery system that restores to stocl if something fails while installing a rom or no boot.
It seems im doing your work which you could have easily googled up.
The rom with BRD5 build will work 100%
---------- Post added at 07:52 PM ---------- Previous post was at 07:50 PM ----------
There is, you probably didnt try. I always use it to download rom as other websites for stock rom are slow or wants me to signup.
Click to expand...
Click to collapse
Can you tell me what version exactly ? Because the last version is doing nothing. If you think by now i did not tried several things from google you are wrong ! I even tried Keis and that program has something there but it`s not connecting with my phone
vinsenliu said:
Before Samsung Remove that feature, i always using Smart Switch to Download Firmware and Copy firmware to my hard drive... So, sadly Samsung remove this feature... I like download from smart switch than other website... I don't know if old version still work...
Click to expand...
Click to collapse
Its there in the new version, try it when you can. I have downloaded mine this month. Thats how i got the BDR4 build.
sandeepkumar0153 said:
Its there in the new version, try it when you can. I have downloaded mine this month. Thats how i got the BDR4 build.
Click to expand...
Click to collapse
Hmmm.. oke i will try
ntzntz said:
Can you tell me what version exactly ? Because the last version is doing nothing. If you think by now i did not tried several things from google you are wrong ! I even tried Keis and that program has something there but it`s not connecting with my phone
Click to expand...
Click to collapse
What your device country?
Sent from my j7xelte using XDA Labs
ntzntz said:
Can you tell me what version exactly ? Because the last version is doing nothing. If you think by now i did not tried several things from google you are wrong ! I even tried Keis and that program has something there but it`s not connecting with my phone
Click to expand...
Click to collapse
Kies doesn't work with this phone. Scroll up i have linked to a xda forum which is Elite rom. Its stock and would work in your case. Just flash and enjoy.
vinsenliu said:
Hmmm.. oke i will try
What your device country?
Sent from my j7xelte using XDA Labs
Click to expand...
Click to collapse
Romania
ntzntz said:
Romania
Click to expand...
Click to collapse
What you device type? F or FN or something else?
UPDATE: I find info about J7 2016 in Samsung Romania Site and they say your type is SM-J710FN... So try flash this... This firmwate from INS (India) but maybe it works for your phone...
https://updato.com/firmware-archive-select-model?record=32052AB4517D11E89F15FA163EE8F90B
Keep relax for fix this problem... Device 5 binary 4 cause sbin...
Source: updato.com
Sent from my j7xelte using XDA Labs
ntzntz said:
Romania
Click to expand...
Click to collapse
Download samfirm 0.3.6 here and use this:
Model: SM-J710FN
Region: SER
PDA: J710FXXS5BRC2
CSC: J710FOXY4BQL3
Phone: J710FXXU5BRC3
Load the file after you have extracted the zip in ap in odin and flash it.
Firmware is from Russia but you wont find on net any for Romania but it works just fine.
Cheers.
vinsenliu said:
What you device type? F or FN or something else?
UPDATE: I find info about J7 2016 in Samsung Romania Site and they say your type is SM-J710FN... So try flash this... This firmwate from INS (India) but maybe it works for your phone...
https://updato.com/firmware-archive-select-model?record=32052AB4517D11E89F15FA163EE8F90B
Keep relax for fix this problem... Device 5 binary 4 cause sbin...
Source: updato.com
Sent from my j7xelte using XDA Labs
Click to expand...
Click to collapse
Oh my that did work. It took me forever to download but it worked. Right now i wait on the phone too boot for the first time. Thank you a lot!
Thanks
ntzntz said:
Oh my that did work. It took me forever to download but it worked. Right now i wait on the phone too boot for the first time. Thank you a lot!
Thanks
Click to expand...
Click to collapse
Happy to help you... I have same problem too..
Sent from my j7xelte using XDA Labs