Develop Bugs

DELETE ME!

Delete this thread please!

2 Qns
1. Can you mount /data (during backup)
2. Can you boot into it using vol+ + home + power
If not then Galaxy 5's port works too..

I think you have posted in the wrong section.
Sent from my Nexus S using xda premium

bump.
this confirmed to work yet?

it is i think, there is a blog about it with screenshots but some says it soft bricked their phone. i'm currently waiting for a clear and safe one to come and i wish it very very soon.
---------- Post added at 04:01 AM ---------- Previous post was at 04:00 AM ----------
noobwithgalaxyy said:
2 Qns
1. Can you mount /data (during backup)
2. Can you boot into it using vol+ + home + power
If not then Galaxy 5's port works too..
Click to expand...
Click to collapse
yes you can, but it may cause some conflicts. haven't tried it though,

yes you can, but it may cause some conflicts. haven't tried it though,
Click to expand...
Click to collapse
Checked.. can't :|

dont try this. there is a great chance that you will soft/hard bricked your phone. let's just wait for mr.Skin1980's stable cwm port for our phone.

cwm 7 for galaxy y
I think all samsung galaxy series get cwm 7 but galaxy y was getting it
i think if cwm 7 port on galaxy y it can upgrade into 2.3.7

adnanahmad1786 said:
I think all samsung galaxy series get cwm 7 but galaxy y was getting it
i think if cwm 7 port on galaxy y it can upgrade into 2.3.7
Click to expand...
Click to collapse
Cwm7???
I am running cwm4 (I have galaxy fit)...and up till now only cwm5 and cwm4 is available for my device!!!
Maybe you are talking about cm7 (cyanogenmod7)...that is a rom, cwm is a recovery...
Even my device doesn't have official cm on it (there are only unofficial ones)...
So you will have to be patient

2.3.7 was for nexus.

i have a better solution... there's a .zip from the skin1980 thread. each time you need clockwork, just go in recovery mode and apply the zip, it will boot the CWM

sireangelus said:
i have a better solution... there's a .zip from the skin1980 thread. each time you need clockwork, just go in recovery mode and apply the zip, it will boot the CWM
Click to expand...
Click to collapse
this is the best solution so far!!!

need someone dev to porting cyanogen to galaxy y

termagazis said:
this is the best solution so far!!!
Click to expand...
Click to collapse
1. Im running on 2.3.6 build dxkl2. skin1980 CWM starts backup , but fails on mount/data and backup stops. Tried also thru Rom Manager same failure. Any solution.
2. Also i have a one package rom S5360JPKK2_S5360OJPKK1_S5360XXKK7_HOME.tar.md5
Arabia fonts version, copied while updating by kies , any ideas to put it back.

mustang4372 said:
1. Im running on 2.3.6 build dxkl2. skin1980 CWM starts backup , but fails on mount/data and backup stops. Tried also thru Rom Manager same failure. Any solution.
2. Also i have a one package rom S5360JPKK2_S5360OJPKK1_S5360XXKK7_HOME.tar.md5
Arabia fonts version, copied while updating by kies , any ideas to put it back.
Click to expand...
Click to collapse
1.backup-restore works fine for me on skin1980's recovery i dont know why this happen to you...
2.our device dont suport one package firmware flashing!our big problem!

mustang4372 said:
1. Im running on 2.3.6 build dxkl2. skin1980 CWM starts backup , but fails on mount/data and backup stops. Tried also thru Rom Manager same failure. Any solution.
2. Also i have a one package rom S5360JPKK2_S5360OJPKK1_S5360XXKK7_HOME.tar.md5
Arabia fonts version, copied while updating by kies , any ideas to put it back.
Click to expand...
Click to collapse
+1 doesn't work for me too. running on 2.3.6 dxkl2

is not working i thought is was but it isn't
i hope a mod will close this thread
/close

The zip that skin posted is working for me, its the best that we have yet.

i was saying about the method that i write on the first post

thx alot ...

[Q] Continuos reboot

Hi Men
After the attempt to install via Odin the firmware I8150XXLMB my 8150 continuously reboot and on the screen cyclically appear the Samsung logo.
With a long press on the power button I can switch off the phone but if switched on the phone starts, introduce itself, gives out the Samsung sound, the Samsung logo appears but after that the boot sequence restarts from the Samsung logo.
I can go in download mode, Odin recognize the Phone, the attempt to upload a new firmware can be performed but as described above the boot sequence never ends.
I took out the battery without any results and obviously the connection with Kies did not succeed.
Do you have any suggestion?
Thanks in advance

Are you sure you have the right firmware , is your region code correct ?

Yes I am sure, I am based in Europe and the firmware was released for Germany, it worked fine in the past on my phpne, I got the problem while installing it over REMICS ROM FOR Galaxy W I8150
12alex21 said:
Are you sure you have the right firmware , is your region code correct ?
Click to expand...
Click to collapse

GiulyR1 said:
Yes I am sure, I am based in Europe and the firmware was released for Germany, it worked fine in the past on my phpne, I got the problem while installing it over REMICS ROM FOR Galaxy W I8150
Click to expand...
Click to collapse
So i'm based in germany and have a german device I am using
I8150XXLA2_I8150DBTKJ1_I8150XXKL3_HOME.tar
What options have you checked ?
everything should work using this :
http: // mygalaxywonder.blogspot.com/2012/07/how-to-flash-and-install-stock-rom.html (i am to new to post links)
which vesion of odin are you using ?
mine is v4.43

I choosed One package option and used Odin v4.43
Maybe the solution is trying to install a multi package firmware, but I do not know were to find it out
12alex21 said:
So i'm based in germany and have a german device I am using
I8150XXLA2_I8150DBTKJ1_I8150XXKL3_HOME.tar
What options have you checked ?
everything should work using this :
http: // mygalaxywonder.blogspot.com/2012/07/how-to-flash-and-install-stock-rom.html (i am to new to post links)
which vesion of odin are you using ?
mine is v4.43
Click to expand...
Click to collapse

GiulyR1 said:
I choosed One package option and used Odin v4.43
Maybe the solution is trying to install a multi package firmware, but I do not know were to find it out
Click to expand...
Click to collapse
i think you simply have to unchek onpackage

Thanks for the suggestion, but I am not so sure that it works for me as I was istalling a .md5 package
12alex21 said:
i think you simply have to unchek onpackage
Click to expand...
Click to collapse

did the flashing finished?
Sent from my GT-I8150 using xda premium

Yes it did, the ODIN proces arrived to the end.
hadidjapri said:
did the flashing finished?
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse

Try this one here
hope it could be your help

This worked for me :
http://forum.xda-developers.com/showthread.php?t=1467128

12alex21 said:
This worked for me :
http://forum.xda-developers.com/showthread.php?t=1467128
Click to expand...
Click to collapse
good work.

[HELP] Phone bricked

Hello dear users of xda. I have a serious problem. My phone is bricked after installing Chainfire 3d driver on jellybean ( i forgot it will not work on JB)
So then i wanted to reflash the Jb MC8 but odin does'nt detect my phone ;(. Tried on 3 pc's tried reinstalling drivers, tried Heimdall still the same.
Recovery mode works, but i dont have a backup. (BTW i have stock recovery of JB MC8) Tried my friend's cable (she has ace 2 too) did'nt work. My flash counter is 2 so i am afraid i might even have to buy a new phone. Can anyone help???

Rihis said:
Hello dear users of xda. I have a serious problem. My phone is bricked after installing Chainfire 3d driver on jellybean ( i forgot it will not work on JB)
So then i wanted to reflash the Jb MC8 but odin does'nt detect my phone ;(. Tried on 3 pc's tried reinstalling drivers, tried Heimdall still the same.
Recovery mode works, but i dont have a backup. (BTW i have stock recovery of JB MC8) Tried my friend's cable (she has ace 2 too) did'nt work. My flash counter is 2 so i am afraid i might even have to buy a new phone. Can anyone help???
Click to expand...
Click to collapse
try reinstaling usb drivers if your PC dont recognise phone : http://forum.xda-developers.com/showthread.php?p=11633550#post11633550

Allready tried
Rooobertinhooo said:
try reinstaling usb drivers if your PC dont recognise phone : http://forum.xda-developers.com/showthread.php?p=11633550#post11633550
Click to expand...
Click to collapse
Dude i allready tried that 3 times ;(

I dont know chainfire, but have you already tried to flash Italian job or kyryllos Rom via temporary cwm again?
Sent from my GT-I8160 using xda app-developers app

One more thing
Rooobertinhooo said:
try reinstaling usb drivers if your PC dont recognise phone : http://forum.xda-developers.com/showthread.php?p=11633550#post11633550
Click to expand...
Click to collapse
Would it matter if i had disabled usb debug before the brick happened ?

Rihis said:
Would it matter if i had disabled usb debug before the brick happened ?
Click to expand...
Click to collapse
Flash via odin you can don't tick usb debugging, if odin cannot see your device you must reinstall samsung usb driver
You can copy rom cook to extarnal card and flash it via cwm or twrp i hope it work again
Sent from my GT-I8160 using xda premium

Don't have TWRP or CWM
shine911 said:
Flash via odin you can don't tick usb debugging, if odin cannot see your device you must reinstall samsung usb driver
You can copy rom cook to extarnal card and flash it via cwm or twrp i hope it work again
Sent from my GT-I8160 using xda premium
Click to expand...
Click to collapse
Dude i said i dont have any cwm or twrp installed. Odin does'nt detect phone even after reinstalling drivers 3 times. I have only stock recovery for my phone.

Can you tell me how?
forgottnxd said:
I dont know chainfire, but have you already tried to flash Italian job or kyryllos Rom via temporary cwm again?
Sent from my GT-I8160 using xda app-developers app
Click to expand...
Click to collapse
Please can you tell me how to enable temp cwm ? i am a complete noob and really want to get my phone back.

Rihis said:
Dude i said i dont have any cwm or twrp installed. Odin does'nt detect phone even after reinstalling drivers 3 times. I have only stock recovery for my phone.
Click to expand...
Click to collapse
You can copy cwm (the zip file) to the external card and rom cook try flash rom cook via cwm.
Sent from my GT-I8160 using xda premium

Give it to Samsung.

loof13 said:
Give it to Samsung.
Click to expand...
Click to collapse
Easy and simple way!
Sent from my GT-I8160 using xda premium

Seriously?
shine911 said:
Easy and simple way!
Sent from my GT-I8160 using xda premium
Click to expand...
Click to collapse
It's not funny my flash counter is 2 and i guarantee that they arent going to exchange mah old phone to a new one. Unless i think of a uber story of how i dont know what is flash counter and so on

Rihis said:
It's not funny my flash counter is 2 and i guarantee that they arent going to exchange mah old phone to a new one. Unless i think of a uber story of how i dont know what is flash counter and so on
Click to expand...
Click to collapse
I've given my old phone plenty of times to Samsung. It had flash counter 38! Most service centers don't look at it. Give it a shot.

I dont thing it will work dude
loof13 said:
I've given my old phone plenty of times to Samsung. It had flash counter 38! Most service centers don't look at it. Give it a shot.
Click to expand...
Click to collapse
The problem is, I am in Latvia and i dont think people here would'nt check the counter. Do you know any cwm flashable rom that could finally let me have my phone back ??

@Rihis : http://db.tt/m3Wje1qV CWM File Good luck
Search Before POSTING !

Any rom ?
Rikxzdjz said:
@Rihis : http://db.tt/m3Wje1qV CWM File Good luck
Search Before POSTING !
Click to expand...
Click to collapse
But what do i flash in cwm ? I dont think you can flash a .md5 in recovery

Md5 ? CWM backup files ? Yes u can ...
-Create a new file "clockworkmod"
-Move ur CWM Backup files to Clockworkmod folder
-Open CWM
-Restore
Search Before POSTING
http://forum.xda-developers.com/showthread.php?t=2000417 Q and A Thread !

Quick update : I installed Italian job 1.0 and it went past the Model screen but now it is just stuck on the samsung logo help again ???

Download CWM 6 from here : http://d-h.st/oZD
Installation :
1. Download the zip.
2. Put it in the sdcard.
3. Reboot to recovery.
4. Flash update.zip from the recovery.
5. Flash the Italian Job ROM [ HERE ]
---------- Post added at 03:43 AM ---------- Previous post was at 03:39 AM ----------
Rihis said:
Quick update : I installed Italian job 1.0 and it went past the Model screen but now it is just stuck on the samsung logo help again ???
Click to expand...
Click to collapse
u must Mount /system, /data, /cache, /preload to install Italian job
Reinstall it again

Master-ZizO said:
Download CWM 6 from here : http://d-h.st/oZD
Installation :
1. Download the zip.
2. Put it in the sdcard.
3. Reboot to recovery.
4. Flash update.zip from the recovery.
5. Flash the Italian Job ROM [ HERE ]
---------- Post added at 03:43 AM ---------- Previous post was at 03:39 AM ----------
u must Mount /system, /data, /cache, /preload to install Italian job
Reinstall it again
Click to expand...
Click to collapse
Thanks dude!!! (Can any mod close this thread???)

Samsung grand duos need help

hi :crying:
can anyone help me to fix my device. it's dead.
I did update it after that it did not boot anymore ..
I tried to boot to recovery mode but also it did not .. it gave black screen.
I also tried to boot to download mode but also it did not also the same it gave black screen.
please help .. what can I do

yagahrhm said:
hi :crying:
can anyone help me to fix my device. it's dead.
I did update it after that it did not boot anymore ..
I tried to boot to recovery mode but also it did not .. it gave black screen.
I also tried to boot to download mode but also it did not also the same it gave black screen.
please help .. what can I do
Click to expand...
Click to collapse
Better to go service center... screen is dead.. Same complaint happened to one xda member..
Sent from Gt-I9082 stock AMCD firmware

yagahrhm said:
hi :crying:
can anyone help me to fix my device. it's dead.
I did update it after that it did not boot anymore ..
I tried to boot to recovery mode but also it did not .. it gave black screen.
I also tried to boot to download mode but also it did not also the same it gave black screen.
please help .. what can I do
Click to expand...
Click to collapse
You can download the original firmware and reflash it using " Odin". Search for tha grand forum to how to do it.
Sent from my GT-I9082 using Tapatalk 2

SRISRIANDROID said:
You can download the original firmware and reflash it using " Odin". Search for tha grand forum to how to do it.
Sent from my GT-I9082 using Tapatalk 2
Click to expand...
Click to collapse
If he cannot go to download mode or recovery mode.. How will he flash stock firmware.. Then he have to learn some magic or what..
Sent from Gt-I9082 stock AMCD firmware

I accidently deleted secphonemultisim.apk for xxamd6 can someone please upload it here
Sent from my GT-I9082 using xda premium
I just fixed it by flashing the rom again

rishabh56 said:
I accidently deleted secphonemultisim.apk for xxamd6 can someone please upload it here
Sent from my GT-I9082 using xda premium
Click to expand...
Click to collapse
dude i will upload it for u
---------- Post added at 09:20 PM ---------- Previous post was at 09:19 PM ----------
Sarath280 said:
dude i will upload it for u
Click to expand...
Click to collapse
do u want it for odexed or deodexed rom

HOW TO SWAP EXTERNAL TO INTERNAL SD IN SAMSUNG GALAXY GRAND.................PLZ RLP FAST

mukeshc15 said:
HOW TO SWAP EXTERNAL TO INTERNAL SD IN SAMSUNG GALAXY GRAND.................PLZ RLP FAST
Click to expand...
Click to collapse
I can help you with this. First you need to download Root External 2 Internal SD.
https://play.google.com/store/apps/details?id=eu.codlab.int2ext&hl=en
After install, at setting section, tick "send rescan" and "use per default".
At the ext. sdcard device access, chage it to "/dev/block/void/179:9".
Then swap you memory. It should work now.
(It can't make it permanent swap, so the app will try to auto swap it on each boot, tick the "**At boot" option on the menu.)
Hope that helps.

Phone messed up

Well.. somehow I managed every time the phone tries to boot it says GT-s7500
i didnt flash any wrong rom... just install Clockwork Recovery from Google Play and tried to install a recovery from there and then Hell broke loose.
it only boots into recovery but i cant install anything. every package i choose to install gives me some error and the installation aboards. I tried various things but nothing really works...
than I downloaded Odin put the phone in the Downloading Mode.. the problem i have there is that despite the Samsung appears in WIndows Device manager ODIN doesnt see it so that I could restore it from there!
any advice would be really helpfull!!
thanks!!

greek_lover_69 said:
Well.. somehow I managed every time the phone tries to boot it says GT-s7500
i didnt flash any wrong rom... just install Clockwork Recovery from Google Play and tried to install a recovery from there and then Hell broke loose.
it only boots into recovery but i cant install anything. every package i choose to install gives me some error and the installation aboards. I tried various things but nothing really works...
than I downloaded Odin put the phone in the Downloading Mode.. the problem i have there is that despite the Samsung appears in WIndows Device manager ODIN doesnt see it so that I could restore it from there!
any advice would be really helpfull!!
thanks!!
Click to expand...
Click to collapse
Sounds Like You Flashed A Recovery For Samsung Galaxy Ace Plus on your gio!
To Flash VIA Odin, Install Samsung USB Driver For Mobile Phones By @SamHaLeKe :good: and make sure you are not using win 8.1 :fingers-crossed:
Link: http://forum.xda-developers.com/showthread.php?t=961956

waqaswasil said:
Sounds Like You Flashed A Recovery For Samsung Galaxy Ace Plus on your gio!
To Flash VIA Odin, Install Samsung USB Driver For Mobile Phones By @SamHaLeKe :good: and make sure you are not using win 8.1 :fingers-crossed:
Link: http://forum.xda-developers.com/showthread.php?t=961956
Click to expand...
Click to collapse
thats what I did.. but unfortunately ODIN doesnt see my phone...
when I plug the USB into the phone there comes a message saying: "odin oops - usb read transaction failed"
should I try one of the other "unbrick" methods??
thanks!!!

Good Luck!
greek_lover_69 said:
thats what I did.. but unfortunately ODIN doesnt see my phone...
when I plug the USB into the phone there comes a message saying: "odin oops - usb read transaction failed"
should I try one of the other "unbrick" methods??
thanks!!!
Click to expand...
Click to collapse
Remeber that you have to use odin v4.42 only NOT ANY OTHER VERSION!
BTW have you tried Different USB port or Cable??? :fingers-crossed:

waqaswasil said:
Remeber that you have to use odin v4.42 only NOT ANY OTHER VERSION!
BTW have you tried Different USB port or Cable??? :fingers-crossed:
Click to expand...
Click to collapse
well yeah i tried various USB ports... I have managed to do something.. although it is still strange..
I downloaded all ODIN versions... as I sais before the 4.42 didnt see my phone... as any other 4xxxx version...
the only versions that did see my phone when connected were: 1.85 - 1.87 and the 3.09, I repeat 4.42 NOT working...
so tried to flash there... but only errors came up for some reason.... I had downloaded some recoveries for the phone so I tried flashing them. That worked. I got a success.
I tried flashing: stockrecovery-DXKT4-odin.tar
cwm-5.0.2.7-ext4+rfs-odin.tar
cwm-5.0.2.7-ext4only-odin.tar
they were all successfully installed but I just cant flash a firmware,,,, :/
Now when the Phone boots up I get the samsung logo and afer that the yellow exclamation mark!
Though I cant boot in any of the recoveries I previously flashed!!
thank you!!

Redownload gio ops file and try again (use a different source) with ODIN v4.42

waqaswasil said:
use a different pc!!!!
if it doesn't work, maybe @jkoetsier or @belyava can help you
P.S: redownload gio ops file and try again (use a different source)
Click to expand...
Click to collapse
ok i will try it on my laptop tonight and let you know! should I PM them? the persons you mentioned?!

greek_lover_69 said:
ok i will try it on my laptop tonight and let you know! should I PM them? the persons you mentioned?!
Click to expand...
Click to collapse
Not nessesary, as I saw it already.
https://www.dropbox.com/sh/7fruf0tmykh0ggd/AABQiev9XrzNK3MX4mIVy30ka
Try the usb drivers from this link, they should work perfectly. You can use the other files, like the recovery's and gio ops as wel from that link.
Whatever happens to my phone, I use these files to repair my gio and till now, I always succeeded...
Sent from my GT-S5660 using XDA Premium 4 mobile app

If flashing only the recovery doesn't solve your problem, flash stockrom...
Sent from my GT-S5660 using XDA Premium 4 mobile app

jkoetsier said:
If flashing only the recovery doesn't solve your problem, flash stockrom...
Sent from my GT-S5660 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hello! Sure I know that. But as I have said i CANT flash any rom! every time I try to "error" pops up!
Thanks for you files but I still got the same Problem. Odin 4.42 wont recognize my phone! (I have tried various drivers and of course the ones you sent me too)
So if there would be any other solution I would really appreciate! )

greek_lover_69 said:
Hello! Sure I know that. But as I have said i CANT flash any rom! every time I try to "error" pops up!
Thanks for you files but I still got the same Problem. Odin 4.42 wont recognize my phone! (I have tried various drivers and of course the ones you sent me too)
So if there would be any other solution I would really appreciate! )
Click to expand...
Click to collapse
Give Screenshots

waqaswasil said:
Give Screenshots
Click to expand...
Click to collapse
as I told before... 4.42 doesnt even see the phone and on the 1.8x version I can flash any recovery I want but no firmware!!

greek_lover_69 said:
as I told before... 4.42 doesnt even see the phone and on the 1.8x version I can flash any recovery I want but no firmware!!
Click to expand...
Click to collapse
That's not a Gio (S5660) DUDE, That's a Mini 2 (S6500), you need Mini 2 firmware for flashing stock via ODIN (v3.04).
Happy Flashing
P.S: Odin (v4.42) is only for Gio and related models.

waqaswasil said:
That's not a Gio (S5660) DUDE, That's a Mini 2 (S6500), you need Mini 2 firmware for flashing stock via ODIN (v3.04).
Happy Flashing
P.S: Odin (v4.42) is only for Gio and related models.
Click to expand...
Click to collapse
oo my god.. lol... now I feel really stupid.. hahaha... thats not even my phone! and the dude who gave it to me to fix told i was a Gio so I didnt even bother to check the model .. lol... hmmm yeah maybe that will do the trick xD