Hi all,
I have 2 FireTVs that are rooted and it was pretty easy. I just got a 3rd for a friend and I'm now having issues. The FireTV has a serial of 7090030342920*** which from previous research others have been able to root. Now I have already tried the pull the cable trick but the checking for updates is to fast and it starts downloading the update. I also added the 3 domains to block and all it does is sit at the "checking for updates" screen. I've let it sit there for 20 min and still nothing. I also removed 2 of the 3 domains (left amzdigitaldownloads.edgesuite.net) and the same thing happens. Has anyone else experienced this? Should I let it update and hope that its an incremental update? Any help is appreciated.
Thanks,
BlueKalel
BlueKalel said:
Hi all,
I have 2 FireTVs that are rooted and it was pretty easy. I just got a 3rd for a friend and I'm now having issues. The FireTV has a serial of 7090030342920*** which from previous research others have been able to root. Now I have already tried the pull the cable trick but the checking for updates is to fast and it starts downloading the update. I also added the 3 domains to block and all it does is sit at the "checking for updates" screen. I've let it sit there for 20 min and still nothing. I also removed 2 of the 3 domains (left amzdigitaldownloads.edgesuite.net) and the same thing happens. Has anyone else experienced this? Should I let it update and hope that its an incremental update? Any help is appreciated.
Thanks,
BlueKalel
Click to expand...
Click to collapse
Continue to block all 3 IP's.
https://www.youtube.com/watch?v=vzDiViqXdSg
http://www.aftvnews.com/start/
OK, it finally moved to the registration screen. It took almost 30+ minutes to get there which I've never seen before. Next time I should wait an hour instead of pulling the plug.
Thanks,
BlueKalel
BlueKalel said:
OK, it finally moved to the registration screen. It took almost 30+ minutes to get there which I've never seen before. Next time I should wait an hour instead of pulling the plug.
Thanks,
BlueKalel
Click to expand...
Click to collapse
Same here
Related
So I hear lollipop is out and I go and check for updates, except it says it's checking for updates...
for 15 minutes now.
I tried restarting, but it keeps doing it, whats up?
I'm from Denmark, its a fully stock One M8, nothing has been tangled with or rooted etc.
Not carrier locked or anything.
Then ignore it and let it time out
SaHiLzZ said:
Then ignore it and let it time out
Click to expand...
Click to collapse
How long is that? It's been 45 minutes now and counting
Just got the S6 Edge today. I installed smart switch and follow all steps layer out in another thread here. I keep getting stuck at 51% when it says it's downloading. Anyone else having same problem?
Farva0412 said:
Just got the S6 Edge today. I installed smart switch and follow all steps layer out in another thread here. I keep getting stuck at 51% when it says it's downloading. Anyone else having same problem?
Click to expand...
Click to collapse
I think it's an error work smart switch, it worked for me yesterday and today everyone's is getting stuck at 51%.
Farva0412 said:
Just got the S6 Edge today. I installed smart switch and follow all steps layer out in another thread here. I keep getting stuck at 51% when it says it's downloading. Anyone else having same problem?
Click to expand...
Click to collapse
U could just download the full firmware and flash thru odin
Lancerz said:
I think it's an error work smart switch, it worked for me yesterday and today everyone's is getting stuck at 51%.
Click to expand...
Click to collapse
Same here, worked fine for me a couple days ago and now just stalls at 51%
Anyone able to get past 51%?
I just tried the smart switch, the first time it got stuck at 51%. After awhile I just hit cancel and tried again, got all the way to 85 and seemed to get stuck, but I let it sit and eventually it jumped to 100%. Everything completed as it should after that.
ryan09266 said:
I just tried the smart switch, the first time it got stuck at 51%. After awhile I just hit cancel and tried again, got all the way to 85 and seemed to get stuck, but I let it sit and eventually it jumped to 100%. Everything completed as it should after that.
Click to expand...
Click to collapse
mac or pc?
PC, windows 8.1
So after doing the smart switch reinstall I can definitely say I have seen a massive improvement in battery life. 6 hours into the day, at 89% and cell standby is at 1%. Before my battery would be in the 70s by now, and cell standby 8-9%. My advice keep trying smart switch if it isn't working for you.
still stuck windows 8.1 64bit.. tried flashing firmware through odin, tried using smart switch in recovert mode and normal mode.. any other ideas? I'm gonna try a windows 7 machine tonight. This just sucks, think I'm gonna call tmobile for another replacement.
Hi,
yesterday while using the watch I got the message "shutting down". The battery was flat and after charging the watch got stuck on the four moving boot symbols. To cure this I have tried both software repair and update using the Experia companion. I have as well tried resetting to factory settings using the watch own recovery but all to no avail. Can anyone please help me how to proceed from here?
baronimus said:
Hi,
yesterday while using the watch I got the message "shutting down". The battery was flat and after charging the watch got stuck on the four moving boot symbols. To cure this I have tried both software repair and update using the Experia companion. I have as well tried resetting to factory settings using the watch own recovery but all to no avail. Can anyone please help me how to proceed from here?
Click to expand...
Click to collapse
In the recovery log it says in the beginning: couldn't find tzdata for local time, GMT!, posixrules!
baronimus said:
In the recovery log it says in the beginning: couldn't find tzdata for local time, GMT!, posixrules!
Click to expand...
Click to collapse
I now installed twrp and flashed SWR50_6.0.1_MWD49B This was successful but the watch is still stuck on the four symbols. I'm outta clues please help anyone
baronimus said:
I now installed twrp and flashed SWR50_6.0.1_MWD49B This was successful but the watch is still stuck on the four symbols. I'm outta clues please help anyone
Click to expand...
Click to collapse
I had the same issue and responded on your partition likeness. I can only get mine back to LP. I have tried the above ROM and several others to no avail. If you happen to get yours going again, please advise the steps you took...and I'll do the same.
Will do
baronimus said:
Will do
Click to expand...
Click to collapse
Did you ever get yours to fully boot to MM? I have since tried other methods and am still stuck on the 4 dots / symbols. LP still runs fine, but would like to get it to MM.
I did not unfortunately. Mine works fine on LL except for gestures. It does not update automaticly which is good, since MM gives four dots. Why it doesn't work beats me.
All the best
baronimus said:
I did not unfortunately. Mine works fine on LL except for gestures. It does not update automaticly which is good, since MM gives four dots. Why it doesn't work beats me.
All the best
Click to expand...
Click to collapse
Same here. Thanks for the response. I was wondering if you somehow got it to work. I have tried a couple other ROMs to no avail. I'm quite sure if the experts had the watch, they could figure it out, but when theirs do not act like mine (ours), it may be hard for them to reproduce a fix. Anyway, LP works fine and does quite well with the battery also...so, it is fine.
golfnut22 said:
Same here. Thanks for the response. I was wondering if you somehow got it to work. I have tried a couple other ROMs to no avail. I'm quite sure if the experts had the watch, they could figure it out, but when theirs do not act like mine (ours), it may be hard for them to reproduce a fix. Anyway, LP works fine and does quite well with the battery also...so, it is fine.
Click to expand...
Click to collapse
Hmmm right now I believe my watch is fatally damaged. It rapidly loses power (100% to 0% in a couple of minutes) when connecting to the smartphone. I think my (perhaps your) problems arise from a physically damaged watch. I think the battery is damaged and perhaps also the HDD probably due to moist having entered the watch. My problem started after a swim.
Best of luck with your watch, I think mine goes to scrap
baronimus said:
Hmmm right now I believe my watch is fatally damaged. It rapidly loses power (100% to 0% in a couple of minutes) when connecting to the smartphone. I think my (perhaps your) problems arise from a physically damaged watch. I think the battery is damaged and perhaps also the HDD probably due to moist having entered the watch. My problem started after a swim.
Best of luck with your watch, I think mine goes to scrap
Click to expand...
Click to collapse
Oh, sorry to hear that. Right now, I can get a solid 2 days of battery life with just having bt and reviewing notifications. I hope it does not go your route, but thanks for the heads up. Several times I had to wait until mine fully discharged before I could get it going again when I was playing around with flashing files. Anyway, I figured I was sort of lucky not bricking in since I had no clue what I was doing. So, I have just decided to let it be for now and concede to running it on LP.
Alright guys, so here's a strange issue that I encountered on day 1 of owning my Pixel XL (NDE63N, 32GB/Verizon):
Unlocked bootloader, rooted, installed all available play store updates, configured the phone how I wanted it, and everything was great.
I played with the phone on and off throughout the day with zero issues.
I installed a few of my favorite apps: URET, cSploit, zAnti,etc..
Ok, on with what happened: I was holding the phone, reading a forum post, when all of a sudden an error pops up "System UI has stopped."
This error repeatedly pops up no matter how many times you cancel it, and no other buttons work (minus the power button.)
- Alright, so I rebooted(several times,) no luck.
- Rebooted into safe mode - no luck.
- Tried to get into recovery to factory reset - no luck (just showed Android with exclamation point.)
- Finally decided against my will that I was going to just re load the factory image through fastboot..
Well, the device was powered on, and I plugged it into USB to see if ADB would recognize it. But for some reason the phone returned to normal! I unplugged it, and it went back to the error.. Plugged it back in, it was back to normal again.
I uninstalled URET, and all is well again!
Not quite sure how/why a USB connection would *fix* the error message temporarily, but it did!
So, in case any of you have the same issue, just try to plug it into your computer before you try to reset your phone lol
Sorry for the long post for such an easy fix, but I figured I'd be as detailed as possible in case someone else has a similar situation.
Sent from my Pixel XL using Tapatalk
battery level below 15% when this is happening? That was a side effect of the Sr1 for supersu
UrGonnaDie1 said:
battery level below 15% when this is happening? That was a side effect of the Sr1 for supersu
Click to expand...
Click to collapse
Hmm, that's weird! I honestly have no idea if it was or not!
I feel like maybe I didn't just figure out a stupid trick to help people out, haha
Thank you for letting me know that.
Edit: I just checked, and I'm on SR2, so I wonder if the issue persisted across it. Going to update to SR3 or 4 now.
Sent from my Pixel XL using Tapatalk
foil said:
Hmm, that's weird! I honestly have no idea if it was or not!
I feel like maybe I didn't just figure out a stupid trick to help people out, haha
Thank you for letting me know that.
Edit: I just checked, and I'm on SR2, so I wonder if the issue persisted across it. Going to update to SR3 or 4 now.
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
So did any of those solve the issue?
I got the OTA update this morning. Tablet then asked my PIN for encryption with no problem, then after that the only response is messed-up flashing colored lines on the screen. Any suggestions? Fully stock, not rooted, should be just a basic update. North America wifi only version.
Note10.1Dude said:
I got the OTA update this morning. Tablet then asked my PIN for encryption with no problem, then after that the only response is messed-up flashing colored lines on the screen. Any suggestions? Fully stock, not rooted, should be just a basic update. North America wifi only version.
Click to expand...
Click to collapse
Solved itself. If you have this, just give the tablet an hour. It looks like this update takes a long time to apply and leaves the tablet in a strange mood while it is working. When I checked mine after 30 minutes is when it would only flash at me. 30 minutes later is started up normally.