How to make external_sd as primary partition on MIUI V45. THIS IS WORKING JUST ON MIUI.
Install WSM TOOLS FIRST ans now it's very simple, juste install this module and activate in wsm tools
http://d-h.st/wCh
And don't forget to reboot
Related
Hello everyone
I have a HTC Diamond
And want to install Android on it
But do not succeed!
I follow these steps:
1.I Have Formatted My Internal Storage and Create This Partitions :
1st partition: FAT32 (sdcard / Rest)
2nd partition: EXT2 (system / 300MB )
3rd partition: EXT2 (data / 300MB)
4th partition: EXT2 (cache / 300MB)
2.I have downloaded FroyoB THUNDERBOLT V1 from this topic :
viewtopic.php?f=14&t=7558
3.Extracted the FroyoB to sd card (the extracted .zip file was npkboot folder!)
(now on the root of my Internal Storage has a npkboot folder)
4.I have downloaded a zImage + modules and copied those to root of Internal Storage
(now on the root of my Internal Storage there are 3 things! zimage, modules and npkboot folder)
5.But now I do not know what should I do
Please help me
I'll have a look
@ HTC0017 plz post all steps clear
thanX
Please try this, worked for me.
NPKboot folder:
Use the right startup.txt for your device (important: rel_path=npkboot).
Use a ts-calibration file from a working android build.
Put the kernel files in the npkboot folder and start haret from this folder.
Push quickly the volume down button when haret asks for this.
Use the Clear data/etc option to format partitions
When ready install the thunderbolt zip file.
Reboot device and run haret in the NPKfolder to start android for the first time.
In this thread i will share my experience with our little Gio, how to use it with bugless rom, optimized tweaks and all best tricks which i using long time, be patient because this thread will be updated frequently
First of all you will need rom with less bugs, if is possible without bugs??Yes is posible, here it is DEV] CyanogenMod 7 | MoltenMotherBoard (Nightly 20130722)
Then need Adrenaline engine script from here
CWM][SCRIPTS][TWEAKS] Adrenaline™ Engine | STOCK/CM 4.4 | 30/10
After flash cm7 from link above reboot into recovery, mount data and system and install zip from sd card, find adrenaline engine 4.5 cm and flash it. Now reboot.
External partition will need for better experience, so if u didnt make it already do it now, have 2 easy ways without pc, from CWM under advanced have option Partition sd card, but i prefer aparted app from playstore, with aparted when instal on ur phone memory go in settings/storage and unmount sd card, now open aparted and create partition, EXT4 is best choice. Now install link2sd and open it, mount ext4 and reboot.
Now we are ready to use Gio, other important things are 2 apps, first is startupmanager, second is autostarts. That is al for now, its 3am here so ill update this thread when i can.
Thread is opened for discusions and questions
Cheers :good:
That's what I need. Thanks!
1)Can we do it on 2.3.6,stock and stock based customs?
2)Like root+cwm+ partition of ext sdcard and link2sd?
3) what are last 2 apps for?
husokal said:
That's what I need. Thanks!
1)Can we do it on 2.3.6,stock and stock based customs?
2)Like root+cwm+ partition of ext sdcard and link2sd?
3) what are last 2 apps for?
Click to expand...
Click to collapse
*Yes! U can partition or sdcard regardless of the current rom that u have. But take backup of ur sdcard b4 partitioning as it will b formatted during the process.
*Link2SD & similar apps or script require init.d support in ur rom, so stock rom can't help u in this case but any custom rom will b good to use. Btw u can check whether ur rom is init.d supported, by following this path : /system/etc/init.d.
*Last two apps are : Startupmanager.apk & Autostarts.apk
Is there a ROM for Redmi 1s that supports move app to Sd card option?
And is there a CAF rom for this device?
Thanks!
Yes, every Lollipop Rom has the app2sd option, but you can't transfer or permanently link app data without xposed and xinternal module. There are those few programs like link2sd and folder mount, but the first option is the best. Those are Google restrictions, that's why you can't.
Try Format SD as Internal option in CM 13:angel:
Try Mokee Stable Release , it's CM12.1 based Lollipop 5.1.1 with much features already
http://download.mokeedev.com/?device=armani
Mounts2sd can move which partition u choose to external sd, but u have to make 2nd partition of ur sdcard
I installed xperia themed rom http://forum.xda-developers.com/redmi-1s/development/rom-sony-xperia-z5-lollipop-ui-rom-t3254408. I am facing insufficient storage problem while installing the gapps. I guess the xperia apps utilized all the available system storage. Is there any solution for this apart from partitioning the sd card?
Thanks in advance....
maybe mounts2sd can do it, u have the option which partition to move to external sd 2nd partition, so just use other rom with gapps to download mounts2sd then copy the app to ur sdcard then install the xperia themed rom w/o gapps, install and config the mounts2sd install script inside the app n uncheck all option then reboot, open the app again now check move system partition to sdext then reboot (it may take long time since it move the system partition for the 1st time). if it success u can now install the gapps
Hello,
I have a phone: Xiaomi Redmi Note 8T 3/32GB (Android 10 ver. QKQ1.200114.002 ; MIUI ver. GLOBAL 12.0.3.0 Stable QCXMIXM) with Magisk App Installed ver. 23.0 (23000) (21).
I made a partition on my microSD card - EXT4 partition has 35GB, the rest microSD card has exFat partition with 87GB for moving files (check partitions.jpg photo from attachments).
When I open Link2SD and when I choose EXT4 partition, I am always getting error like that:
Partition load error
The partition load script could not be created
can't create '/system/bin/debuggerd.bin' : Read-only file system
(check link2sd_error.jpg photo from attachments).
When I open Apps2SD PRO app, I am getting a warning like that:
Please read carefully!
Systemless root has been detected, do you want Apps2SD to modify system partition?
Note: You can disable this message by selecting "Ignore systemless root" option in Apps2SD settings
(check Apps2SD_warning.jpg photo from attachments).
and when I want to move apps from internal memory to microSD card memory, I am getting second warning in Apps2SD PRO app like that:
Warning!
If after restarting applications disappear from the device, it means that mounting the second partition at boot is not supported on your device, so you should only use a "soft" restart.
If SuperSU has "Mount namespace separation" turned on, turn it off.
Enable "Enable su during bont" in your SuperSU setting
On some devices linking Google apps creates issue. So avoid linking them.
(check Apps2SD_second_warning.jpg photo from attachments).
Does it mean that I made not-working-properly root on my phone?
I have unlocked bootloader, I have installed TWRP Recovery for my Redmi Note 8T and I installed Magisk firstly using patched boot.img, but when I saw a warning in Apps2SD app, I flashed the magisk.zip using TWRP Recovery but it doesn't help.
Link2SD can't see / can't load EXT4 partition on my microSD card but Apps2SD PRO app can see and can mount EXT4 partition to move them the files and make links. Why? Can somebody explain it to me? (check Apps2SD_info.jpg photo from attachments).
How to fix Link2SD app to can see the EXT4 partition on my microSD card?
I am waiting for your help,
Best Regards,
Matt.
I see that I don't have init.d support. Is it important?
MattZet1988 said:
Hello
Click to expand...
Click to collapse
I don't know much about those apps, i think you should report to the app creator/page
flashig magisk.zip in recovery is enough, no need to patch boot.img
about :
"Systemless root has been detected, do you want Apps2SD to modify system partition?"
make a full backup of boot/dtbo/system/vendor/data and allow modification
so if anything goes wrong you can restore
initd is not important but some apps still need it
(you can find it in orangefox addons)
How to allow modification?
MattZet1988 said:
How to allow modification?
Click to expand...
Click to collapse
allow root access and answer the question :
do you want Apps2SD to modify system partition?
with yes