Related
Well, I sure hope I didn't jack up my new phone for good.
I was using odin to get OUDHS CWM-Based Recovery 1.0.3.3 working.
I booted the phone into download mode, then connected and waited for my phone to be recognized. I selected the correct tar and hit start.
It failed on the first write section, and I couldn't get it to continue so i turned my phone off and tried to boot into download mode again. Now no matter what I do it gives me the "firmware upgrade failed" message and tells me to connect to Kies, but Kies will not detect my device.
Any ideas?
For reference I was following http://forum.xda-developers.com/showthread.php?t=2260031 to the letter.
I will continue to work on this for awhile.
belisknerprime said:
Well, I sure hope I didn't jack up my new phone for good.
I was using odin to get OUDHS CWM-Based Recovery 1.0.3.3 working.
I booted the phone into download mode, then connected and waited for my phone to be recognized. I selected the correct tar and hit start.
It failed on the first write section, and I couldn't get it to continue so i turned my phone off and tried to boot into download mode again. Now no matter what I do it gives me the "firmware upgrade failed" message and tells me to connect to Kies, but Kies will not detect my device.
Any ideas?
For reference I was following http://forum.xda-developers.com/showthread.php?t=2260031 to the letter.
I will continue to work on this for awhile.
Click to expand...
Click to collapse
If you can still get into download mode try using odin to flash a complete firmware made for your specific device and obtained from sammobile.com
Sent from my GT-P7510 using xda app-developers app
re: Odin flash
belisknerprime said:
Well, I sure hope I didn't jack up my new phone for good.
I was using odin to get OUDHS CWM-Based Recovery 1.0.3.3 working.
I booted the phone into download mode, then connected and waited for my phone to be recognized. I selected the correct tar and hit start.
It failed on the first write section, and I couldn't get it to continue so i turned my phone off and tried to boot into download mode again. Now no matter what I do it gives me the "firmware upgrade failed" message and tells me to connect to Kies, but Kies will not detect my device.
Any ideas?
For reference I was following http://forum.xda-developers.com/showthread.php?t=2260031 to the letter.
I will continue to work on this for awhile.
Click to expand...
Click to collapse
If I were you I would forget about KIES and uninstall it along with any other samsung applications and drivers
you have on your computer, then reboot your computer and download only the Samsung USB Drivers.
Once you have the latest samsung usb drivers install it and restart your computer.
That way you will have a clean start, and if the screen of your phone displays
anything at all, especially if it displays something about kies then that proves that
your phone will go into download mode if it's done properly.
Press the volume down, home and the power button at the same time until the phone vibrates
and then let go of the power button first before letting go of the other two buttons.
Before you do any of this, you need to download the stock Samsung Jellybean
v4.2.2 M919 MDL Touchwiz Odin flash firmware.
Here is the link to download it: http://k0nane.info/rom/M919UVUAMDL_M919TMBAMDL_TMB.zip
Here is the latest Samsung USB Drivers download: http://downloadcenter.samsung.com/c...ng_USB_Driver_for_Mobile_Phones_v1.5.14.0.exe
Well did finally get Kies to pick up the phone but it just gets stuck on connecting. How is anyone supposed to do a firmware recovery if the phone cant be connected to?
I will try what you said and uninstall and only install the usb drivers.
And to answer your question I can't get into download mode, it just skips right to the Firmware upgrade error.
Although in the top left of the screen I see this:
ODIN MODE
Product Name: SGH-M919
Current Binary: Custom
System Status: Official
CSB-OEM_CONFIG_LSB: 0x30
Write Protection: Enable
Does that mean anything?
belisknerprime said:
Well did finally get Kies to pick up the phone but it just gets stuck on connecting. How is anyone supposed to do a firmware recovery if the phone cant be connected to?
I will try what you said and uninstall and only install the usb drivers.
And to answer your question I can't get into download mode, it just skips right to the Firmware upgrade error.
Although in the top left of the screen I see this:
ODIN MODE
Product Name: SGH-M919
Current Binary: Custom
System Status: Official
CSB-OEM_CONFIG_LSB: 0x30
Write Protection: Enable
Does that mean anything?
Click to expand...
Click to collapse
Then do it the old fashion way, pull the battery out of the phone
and while pressing the volume down/home/power buttons put
the battery back in and see if that gets it into download mode.
(I hope your phone is a Tmobile M919 and not the international version or a variant like the M919V).
Misterjunky said:
Then do it the old fashion way, pull the battery out of the phone
and while pressing the volume down/home/power buttons put
the battery back in and see if that gets it into download mode.
(I hope your phone is a Tmobile M919 and not the international version or a variant like the M919V).
Click to expand...
Click to collapse
Yes, it's is the T-Mobile version. It has the case branding and everything. I got it straight from them.
Ah, that did it! I'm now back in download mode. Thank you.
I'm downloading the stock firmware, it will take about an hour. Should I attempt to flash the OUDHS recovery again, or wait and just flash the stock JB firmware?
re: stock jb
belisknerprime said:
Yes, it's is the T-Mobile version. It has the case branding and everything. I got it straight from them.
Ah, that did it! I'm now back in download mode. Thank you.
I'm downloading the stock firmware, it will take about an hour. Should I attempt to flash the OUDHS recovery again, or wait and just flash the stock JB firmware?
Click to expand...
Click to collapse
You are downloading the STOCK JB firmware now....
After your phone is up and running reboot into download mode and you will need to Odin flash the OUDHS recovery TAR file: http://d-h.st/jTk
Once that's flashed you will need to go into OUDHS recovery and flash this superuser.zip file: http://www.shabbypenguin.com/Android/Scripts/Nexus-Files/Root/Superuser-1.0.1.1.zip
After flashing the superuser.zip reboot the phone.
Just to play it safe, after you reboot the phone reboot it again in recovery and flash this:http://batakang.com/ftp/SGH-M919/ROOT_M919UVUAMDL.zip
This will setup your kernel to be 100% un-restricted so there will be no chance that you will loose root access.
NOTE: If you want to keep your phone STOCK then after odin flashing the JB stock firmware don't do anything else.
Good luck!
Thank you for the help. One question though, Do i continue to use the PDA button on odin for the JB flash like I was instructed for the other thing or do I use the phone button?
FWIW home button is not needed on the S4 to enter recovery or download mode. I love it Just hold down one of the volume buttons as its booting and voila
belisknerprime said:
Thank you for the help. One question though, Do i continue to use the PDA button on odin for the JB flash like I was instructed for the other thing or do I use the phone button?
Click to expand...
Click to collapse
Use the PDA button. I *believe* the phone button is only for flashing modem files.
belisknerprime said:
Thank you for the help. One question though, Do i continue to use the PDA button on odin for the JB flash like I was instructed for the other thing or do I use the phone button?
Click to expand...
Click to collapse
Yes. only use the PDA button
I'm trying to goto stock firmware MDL. Downloaded the right 1.7G file and the 3.07 version of odin.
Put the S4 in download mode,but I see auth fail once the ODIN process starts.
I'm reading this thread:
http://forum.xda-developers.com/showthread.php?t=2483380
Do I need to do the PIT step as well ? ( If yes, where do I find the stock pit files for the S4 US Tmobile?
I grabbed the SGH-M919-TMB-M919UVUAMDL-1366964131*.md5 to use in odin->pda section
My phone is still bricked. Pls help
didadi said:
I'm trying to goto stock firmware MDL. Downloaded the right 1.7G file and the 3.07 version of odin.
Put the S4 in download mode,but I see auth fail once the ODIN process starts.
I'm reading this thread:
http://forum.xda-developers.com/showthread.php?t=2483380
Do I need to do the PIT step as well ? ( If yes, where do I find the stock pit files for the S4 US Tmobile?
I grabbed the SGH-M919-TMB-M919UVUAMDL-1366964131*.md5 to use in odin->pda section
My phone is still bricked. Pls help
Click to expand...
Click to collapse
Make sure your cable is good and try different USB port on pc.
Also which firmware are you on?
☞ Sent from here☜???
I've used 2 cables already and different USB. . I think the pit file is what I may have to check agian,as this seems debugging ODIN failures. Can somebody post me S4, Tmo 16GB stock pit file?
I'm on MK2 firmware. I'm trying to go back to stock firmware/4.2.2.
The exact err I'm getting is:
---
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1).
---
What is the way out here? Have I totally bricked my phone? xda or elsewhere not showing a workable solution yet. (Still searching)
I NOW HAVE ROOT AND RECOVERY!
Thanks to mariostar32 and krankdroid!
Hi all,
I've just bought a Note II and am trying to get root. I've followed this tutorial carefully
HTML:
http://galaxynote2root.com/galaxy-note-2-root/how-to-root-galaxy-note-2-on-linuxubuntu/
and everything completes without error, but whenever I try and boot into recovery it just get a garbled Samsung boot logo and it never gets to recovery.
Now I can't go back to stock updates since my device has been modified, so I'm commited to getting root and custom recovery now.
Can anyone help me with what is going wrong?
Thanks
download the last version 4.1.2 and flash it via odin. If you need any help tell me.
mariostar32 said:
download the last version 4.1.2 and flash it via odin. If you need any help tell me.
Click to expand...
Click to collapse
I can no longer download updates from Samsung since I have tried to root it already.
I can't use Odin since I don't have Windows.
I have tried the method in the link above using Heimdall (Odin equiv. for Linux) and everything went fine (no errors, terminal output was as expected) but cannot get into any recovery (stock or custom)
Before you proceed with tutorial, make sure:
You have installed your Galaxy Note 2 N7100 USB drivers on your PC.
You need to enable USB debugging mode which is deactivated by default.
You smartphone should have 70-80% charge remaining.
Your Galaxy Note 2 N7100 should be factory unlocked.
Backup your important data like Call logs, SMS and other data in stored in phone memory so in case if anything goes wrong, your data is not hurt.
The update is only meant for Galaxy Note 2 N7100, so don’t try it on other variants.
Step 1) Download Android 4.1.2 XXDLK7 for Galaxy Note 2 N7100. " I can't post outside links so type in google galaxy note 2 xxdlk7 "
Step 2) Download ODIN v3.07. It's an old version but you can download a newer version of odin from google but it works np
Step 3) Turn OFF your mobile and go to Download Mode by pressing and holding the Volume Down + Home Buttons together for few seconds followed by Power button until you see Android logo with triangle on screen.
Step 4) Now open ODIN on your PC and connect your Galaxy Note 2 N7100 to your computer.
Step 5) Once your phone is successfully connected to your PC, the ID:COM box on ODIN will turn yellow and will show the COM port number.
Step 6) Select the downloaded file to install by following below steps:
Click on PDA and select file with HOME or CODE in its name.
Now click on Phone and select file with MODEM in its name.
Next click on CSC and select file with CSC in its name.
At last click on PIT and select file with .pit.
Step 7) Again to to ODIN window and check Auto Reboot and F. Reset Time options.
Step 8) Click on Start button in ODIN window to start the installation process. The process will take few minutes to complete.
Step 9) When the installation is completed, your phone will restart. I hope that i helped you GoodLuck
---------- Post added at 01:58 AM ---------- Previous post was at 01:53 AM ----------
B3rz3rk3r said:
I can no longer download updates from Samsung since I have tried to root it already.
I can't use Odin since I don't have Windows.
I have tried the method in the link above using Heimdall (Odin equiv. for Linux) and everything went fine (no errors, terminal output was as expected) but cannot get into any recovery (stock or custom)
Click to expand...
Click to collapse
srry didn't read your reply before i post mine, if u can flash the rom via odin, just try again to root but from another link, i can't put external links, follow a good tutorial for root, and i recommend twrp recovery
srry didn't read your reply before i post mine, if u can flash the rom via odin, just try again to root but from another link, i can't put external links, follow a good tutorial for root, and i recommend twrp recovery
Click to expand...
Click to collapse
I can't use Odin, there is no Linux version.
I've found the TWRP for the Note II:
HTML:
http://teamw.in/project/twrp2/115
Does anyone know if I flash the latest .img file from that using Heimdall will that give me a recovery to then install Super-SU from?
I've only just bought this phone and can't afford to buy another if I brick it, so I'm hesitant to just try without some expert knowledge.
you must be rooted first before putting twrp.
mariostar32 said:
you must be rooted first before putting twrp.
Click to expand...
Click to collapse
Ok, so how can I root it?
The only Linux tutorial I've found doesn't work since I can't get a working recovery in order to install Super-SU and get root.
Is there another way to get root? Or another method that might give me a recovery so I can get root?
Ok after you did the tutorial you got rooted or not ? download root check from play store and check
mariostar32 said:
Ok after you did the tutorial you got rooted or not ? download root check from play store and check
Click to expand...
Click to collapse
No I do not have root. I wish to get root access and install a recovery, then Super-SU.
Try this, It's a root way without odin.
http://forum.xda-developers.com/showthread.php?t=2130276
You can get the mobile Odin that let's you flash firmware from the device itself.
mariostar32 said:
Try this, It's a root way without odin.
http://forum.xda-developers.com/showthread.php?t=2130276
Click to expand...
Click to collapse
Awesome! The Aragorn exploit worked!
Thanks mario
krankdroid said:
You can get the mobile Odin that let's you flash firmware from the device itself.
Click to expand...
Click to collapse
Great! I'll get that to install TWRP or CWM then, since Heimdall seems to be corrupting the recovery when flashing it.
I've got root now (thanks to mario above!) so mobile odin is a good option
Thanks!
It's nice to see that you get rooted, nw download mobile odin and flash twrp.img
(SOFT BRICKED)
while i tried to install cwm using odin in download mode odin shows till setupconnection and after that nothing happens then i removed and switch on my phone then it shows firmware update failed connect via kies for firmware recovery..i downloaded fw from sammobile and tried to flash u
sing odin in down load mode tn
Odin detects comport
i Loaded pda
then click start in odin but it shows fail after sometime :crying:
Gintu said:
(SOFT BRICKED)
while i tried to install cwm using odin in download mode odin shows till setupconnection and after that nothing happens then i removed and switch on my phone then it shows firmware update failed connect via kies for firmware recovery..i downloaded fw from sammobile and tried to flash u
sing odin in down load mode tn
Odin detects comport
i Loaded pda
then click start in odin but it shows fail after sometime :crying:
Click to expand...
Click to collapse
if u can't boot, try to flash ur stock rom again first.
in flashing cwm via odin, u don't need to put anything aside from ops (ancora ops), one package (recovery .md5 file)
guides: follow them strictly!
[HowTo] Flash a firmware with ODIN on Samsung Galaxy W(I8150)
[GUIDE] How to flash CWM6 with Odin on Samsung Galaxy W(I8150)
dec0der said:
if u can't boot, try to flash ur stock rom again first.
in flashing cwm via odin, u don't need to put anything aside from ops (ancora ops), one package (recovery .md5 file)
guides: follow them strictly!
[HowTo] Flash a firmware with ODIN on Samsung Galaxy W(I8150)
[GUIDE] How to flash CWM6 with Odin on Samsung Galaxy W(I8150)
Click to expand...
Click to collapse
Thanks bro..thank u so much i fixed it:laugh:
Gintu said:
Thanks bro..thank u so much i fixed it:laugh:
Click to expand...
Click to collapse
no problem next time, if ur not sure what to do, ask here b4 doing anything :good:
dec0der said:
no problem next time, if ur not sure what to do, ask here b4 doing anything :good:
Click to expand...
Click to collapse
sure
i want to upgrade firmware to become original my os still jellybean and i want update to jelly bean official i dont want custom os then when i connect my phone to kies then i click Tools > Firmware Upgrade and Initialization. its saying not supported but before supported in my old phone ginggerbread os.
what should i do ? thanks
flash jb fw with odin
EDIT: kies doesnt work because you have a csc which doesn't correspond to correct fw but not needed anyway, and you are already on jb kies cant update any furthur, use odin
Sent from my GT-I8160 using xda app-developers app
teddytsen said:
flash jb fw with odin
EDIT: kies doesnt work because you have a csc which doesn't correspond to correct fw but not needed anyway, and you are already on jb kies cant update any furthur, use odin
Sent from my GT-I8160 using xda app-developers app
Click to expand...
Click to collapse
thanks but what does mean flash jb fw ? please step by step or show me what file must i download ?
how to back to official device status because im custom then i go recovery mode then volume up to looking system is official but not showing why ?
HalmyAK said:
thanks but what does mean flash jb fw ? please step by step or show me what file must i download ?
how to back to official device status because im custom then i go recovery mode then volume up to looking system is official but not showing why ?
Click to expand...
Click to collapse
download any jb fw from here http://forum.xda-developers.com/showthread.php?t=2340849, then extract to a folder(in pc, not phone), download odin if you dont have it
1. Power phone off.
2. Press Volume down+Home+Power key to enter download mode.
3. Press volume up when prompted.
4. Make sure you have the drivers all installed and connect the phone to pc.
(thanks gumball3000)
5. open odin
6. click PDA slot, wait for explorer to open, find the md5 you have extracted and double click on it
7. dont touch anything else and click start(odin will hang to check file)
8. wait for finish and it will reboot, wait for PASS in odin and you are safe to disconnect cable
Still 4.4.4 though, apparently it's still just too much effort to update to 5.0.1.
Probably just the stagefright patch...
Beginning August 31, the Samsung Galaxy S 4 will have a optional software update to Android version 4.4.4/ Baseband M919UVUFOH3 via OTA or Samsung Kies. This update provides
New Features______________________Improvements
N/A______________________________Stagefright fix
Anyone know if this can be applied to an S4 with custom, rooted ROM & custom kernel? Or does it only work with a stock phone?
hella356 said:
Anyone know if this can be applied to an S4 with custom, rooted ROM & custom kernel? Or does it only work with a stock phone?
Click to expand...
Click to collapse
It would replace your installed ROM; if you're just looking for the new modem, there's a thread that has it posted in it (sorry, I'm on mobile, or I'd dig it up for you).
Sent from my SGH-M919 using XDA Free mobile app
So, I downloaded the new firmware from SamMobile, since I was using TWRP and the OTA wouldn't have worked.
Link is here: http://www.sammobile.com/firmwares/download/54333/M919UVUFOH3_M919TMBFOH3_TMB/
I had to restart my download several times to get it to finally download completely. Luckily, Firefox would restart where it failed each time, so didn't have to restart from beginning each time. But, it took quite a while - several hours.
BTW, I did a full NAND backup with TWRP before I started this.
Used ODIN 3.09
Flashed once, but the bootloader and modem didn't take, so I did the double flash, and it worked.
To double flash:
Unchecked AutoReboot in ODIN
Flash the firmware once
Pull battery
Boot holding down Vol-Down button to get back to Download mode
Flash again
The problem with the single flash was my WiFi wouldn't turn on, and when I checked out the versions of the ROM, bootloader, modem using Samsung PhoneInfo from the Play Store, I saw the dreaded mis-matched versions.
Some of my partitions were still NH7. Evidently Samsung keeps a backup of some of the partitions and restores them when the phone is rebooted. Double flashing flashes overwrites this backup.
I rooted with CF-AutoRoot again, installed SuperSU, and was back to where I was.
UPDATE:
Only issue so far is that I had to clear the cache on the Play Store. Was getting a services error.
Rob
Thanks for the update. My own download from Sammobile completed successfully (miracle!) And I am considering doing a phone wipe/double flash/rebuild. May choose stock ROM and freeze the junk. I'm on MDL bootloader at the moment and a fairly old LTE modem.
Before I do anything i have to figure out how to back up my texts (in Slimkat messenger app) such that I can restore them properly into the new environment.
Sent from my SGH-M919 using Tapatalk
rlichtefeld said:
So, I downloaded the new firmware from SamMobile, since I was using TWRP and the OTA wouldn't have worked.
Link is here: http://www.sammobile.com/firmwares/download/54333/M919UVUFOH3_M919TMBFOH3_TMB/
I had to restart my download several times to get it to finally download completely. Luckily, Firefox would restart where it failed each time, so didn't have to restart from beginning each time. But, it took quite a while - several hours.
BTW, I did a full NAND backup with TWRP before I started this.
Used ODIN 3.09
Flashed once, but the bootloader and modem didn't take, so I did the double flash, and it worked.
To double flash:
Unchecked AutoReboot in ODIN
Flash the firmware once
Pull battery
Boot holding down Vol-Down button to get back to Download mode
Flash again
The problem with the single flash was my WiFi wouldn't turn on, and when I checked out the versions of the ROM, bootloader, modem using Samsung PhoneInfo from the Play Store, I saw the dreaded mis-matched versions.
Some of my partitions were still NH7. Evidently Samsung keeps a backup of some of the partitions and restores them when the phone is rebooted. Double flashing flashes overwrites this backup.
I rooted with CF-AutoRoot again, installed SuperSU, and was back to where I was.
UPDATE:
Only issue so far is that I had to clear the cache on the Play Store. Was getting a services error.
Rob
Click to expand...
Click to collapse
please.. can you tellme about this:
right now I am on a T-Mobile rooted so this its features on my cell:
SGH-M919
Version: 4.4.2
Band: M919UVUFNB4
Kernel: 3.4.98-KT-SGS4-KK4.4-TW-TMO-07.12.2014-ktoonsez #1
hadware version: REV0.7
Software version: MDF v1.0 Release 2
Click to expand...
Click to collapse
---can my cell update directly to this firmware using ODIN ?
---or I need to be unroot first and then install this firmware?
---or I need to upgrade my modem to the last and then install this firmware via Odin?
please can you tellme about this ? ... thanks
boni7010 said:
please.. can you tellme about this:
right now I am on a T-Mobile rooted so this its features on my cell:
---can my cell update directly to this firmware using ODIN ?
---or I need to be unroot first and then install this firmware?
---or I need to upgrade my modem to the last and then install this firmware via Odin?
please can you tellme about this ? ... thanks
Click to expand...
Click to collapse
If you flash this firmware from SamMobile. It will overwrite your modem to the newest. It will un-root your phone. And, yes you can go directly to this version from your NB4 version.
So, after you flash this firmware you will have the newest modem. And, you will have to root your phone again.
ROM = ROM
Firmware = Modem + bootloader + ROM
Rob
rlichtefeld said:
If you flash this firmware from SamMobile. It will overwrite your modem to the newest. It will un-root your phone. And, yes you can go directly to this version from your NB4 version.
So, after you flash this firmware you will have the newest modem. And, you will have to root your phone again.
ROM = ROM
Firmware = Modem + bootloader + ROM
Rob
Click to expand...
Click to collapse
Muchas Gracias!
Many, many thanks... ok.. I have a tutorial from this site to flash via Odin a old firmware...
Please can any tellme if need a new tutorial or can use the same? ( check and uncheck some options on Odin before flashing ) ...
Sent from my SAMSUNG-SM-N910A using XDA Free mobile app
frustrated foh3
This morning OTA pushed the new update to my phone and I accepted thinking there was a lollipop update finally. I had juke woken up and didn't bother to check first.
Anyway, I'm now on FOH3 and am just trying to install custom recovery on my otherwise un-molested phone. I've tried the heimdall option as well as the cf-auto root with odin 3.09 (even attempted the double flash) either I'm doing something wrong with Odin or missing a step because when I hit start I end with 0 succeeded/0 failed and it stays in download mode. When I attempt to reboot to recovery mode, I get the blue text stating booting recovery and then black screen which eventually just goes back to stock.
Is there some other method I need to try when rooting/installing trwp for FOH3?
[edit: I'm an idiot. assumed I already had debugging turned on. I did not. *facepalm*]
-thanks in advance
I haven't flashed a phone since my galaxy s blaze 4g.
any other link other than from sam mobile??
DMD567 said:
any other link other than from sam mobile??
Click to expand...
Click to collapse
Look here:http://forum.xda-developers.com/gal...mware-firmware-kernel-modem-recovery-t3193835
rlichtefeld said:
So, I downloaded the new firmware from SamMobile, since I was using TWRP and the OTA wouldn't have worked.
Link is here: http://www.sammobile.com/firmwares/download/54333/M919UVUFOH3_M919TMBFOH3_TMB/
Rob
Click to expand...
Click to collapse
I download this file from the link .... so I get a zip file in my pc called "M919UVUFOH3_M919TMBFOH3_TMB" its a 1.56 gb... did I need to open this zip file? or take this zip file and put on Odin 3.09 in AP / PDA ?
because I open the zip file in my pc and have two files:
- SS_DL.dll
- M919UVUFOH3_M919TMBFOH3_M919UVUFOH3_HOME.tar.md5 ( 2.5 gb )
Click to expand...
Click to collapse
I think the one what I need to put on Odin its the last file "M919UVUFOH3_M919TMBFOH3_M919UVUFOH3_HOME.tar.md5" right?
but the other file " SS_DL.dll " for what reason came inside the zip file ?
I read need double flash... with " Unchecked AutoReboot" in Odin... but please can you tellme what more choices I need to check or unchecked in Odin to start flash this firmware ?
and if I need to uninstall kies from my laptop and install another Samsung drivers... or with the drivers came in Samsung Kies its ok to start flash this firmware?
thanks thanks thanks ....
boni7010 said:
I download this file from the link .... so I get a zip file in my pc called "M919UVUFOH3_M919TMBFOH3_TMB" its a 1.56 gb... did I need to open this zip file? or take this zip file and put on Odin 3.09 in AP / PDA ?
because I open the zip file in my pc and have two files:
I think the one what I need to put on Odin its the last file "M919UVUFOH3_M919TMBFOH3_M919UVUFOH3_HOME.tar.md5" right?
but the other file " SS_DL.dll " for what reason came inside the zip file ?
I read need double flash... with " Unchecked AutoReboot" in Odin... but please can you tellme what more choices I need to check or unchecked in Odin to start flash this firmware ?
and if I need to uninstall kies from my laptop and install another Samsung drivers... or with the drivers came in Samsung Kies its ok to start flash this firmware?
thanks thanks thanks ....
Click to expand...
Click to collapse
Just flash the md5 file via Odin. That's all!
boni7010 said:
I download this file from the link .... so I get a zip file in my pc called "M919UVUFOH3_M919TMBFOH3_TMB" its a 1.56 gb... did I need to open this zip file? or take this zip file and put on Odin 3.09 in AP / PDA ?
because I open the zip file in my pc and have two files:
I think the one what I need to put on Odin its the last file "M919UVUFOH3_M919TMBFOH3_M919UVUFOH3_HOME.tar.md5" right?
but the other file " SS_DL.dll " for what reason came inside the zip file ?
I read need double flash... with " Unchecked AutoReboot" in Odin... but please can you tellme what more choices I need to check or unchecked in Odin to start flash this firmware ?
and if I need to uninstall kies from my laptop and install another Samsung drivers... or with the drivers came in Samsung Kies its ok to start flash this firmware?
thanks thanks thanks ....
Click to expand...
Click to collapse
Yes, you unzip the file to your computer. The .tar.md5 file is the one that you browse to and select in Odin.
Uncheck everything in Odin. Then, flash this firmware twice, with out letting your phone boot into the system. After the first flash is finished. Pull the battery. Put the battery back in and hold the Volume Down button while you power on the phone. This will put you back in Download mode. Then, flash the same firmware again.
After that second flash, you can boot your phone into the system normally.
Rob
rlichtefeld said:
Yes, you unzip the file to your computer. The .tar.md5 file is the one that you browse to and select in Odin.
Uncheck everything in Odin. Then, flash this firmware twice, with out letting your phone boot into the system. After the first flash is finished. Pull the battery. Put the battery back in and hold the Volume Down button while you power on the phone. This will put you back in Download mode. Then, flash the same firmware again.
After that second flash, you can boot your phone into the system normally.
Rob
Click to expand...
Click to collapse
"Uncheck everything in Odin".. "Auto Reboot , and F. Reset Time" unchecked ?
and on the second flash, the same or check this two ?
boni7010 said:
"Uncheck everything in Odin".. "Auto Reboot , and F. Reset Time" unchecked ?
and on the second flash, the same or check this two ?
Click to expand...
Click to collapse
If you really wanted to, you could leave those two checked on the second flash.
However, leaving them unchecked on both flashes will work, and are the easiest instructions to follow.
Rob
Oh no.. show this :
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUFOH3_M919TMBFOH3_M919UVUFOH3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
on the blue corner say "failed"
any wrong ???
boni7010 said:
Oh no.. show this :
on the blue corner say "failed"
any wrong ???
Click to expand...
Click to collapse
Read this http://forum.xda-developers.com/showthread.php?t=1622790. If that doesnt work try DIFFERENT usb cables (official works best), verisions of odin and different usb ports. Make sure usb debugging checked and power down and pull battery, then put battery back and (while its off) hold just vol down then plug it in to the computer while odins open. If this stuff doesnt work it could be motherboard (its probably not though, dont worry). Good Luck, keep trying.
rlichtefeld said:
So, I downloaded the new firmware from SamMobile, since I was using TWRP and the OTA wouldn't have worked.
Link is here:
I had to restart my download several times to get it to finally download completely. Luckily, Firefox would restart where it failed each time, so didn't have to restart from beginning each time. But, it took quite a while - several hours.
BTW, I did a full NAND backup with TWRP before I started this.
Used ODIN 3.09
Flashed once, but the bootloader and modem didn't take, so I did the double flash, and it worked.
To double flash:
Unchecked AutoReboot in ODIN
Flash the firmware once
Pull battery
Boot holding down Vol-Down button to get back to Download mode
Flash again
The problem with the single flash was my WiFi wouldn't turn on, and when I checked out the versions of the ROM, bootloader, modem using Samsung PhoneInfo from the Play Store, I saw the dreaded mis-matched versions.
Some of my partitions were still NH7. Evidently Samsung keeps a backup of some of the partitions and restores them when the phone is rebooted. Double flashing flashes overwrites this backup.
I rooted with CF-AutoRoot again, installed SuperSU, and was back to where I was.
UPDATE:
Only issue so far is that I had to clear the cache on the Play Store. Was getting a services error.
Rob
Click to expand...
Click to collapse
tried double and even quad flash, but wifi and 4g still doesn't work, I think it's about kernel, it remains same old