Related
Well, I sure hope I didn't jack up my new phone for good.
I was using odin to get OUDHS CWM-Based Recovery 1.0.3.3 working.
I booted the phone into download mode, then connected and waited for my phone to be recognized. I selected the correct tar and hit start.
It failed on the first write section, and I couldn't get it to continue so i turned my phone off and tried to boot into download mode again. Now no matter what I do it gives me the "firmware upgrade failed" message and tells me to connect to Kies, but Kies will not detect my device.
Any ideas?
For reference I was following http://forum.xda-developers.com/showthread.php?t=2260031 to the letter.
I will continue to work on this for awhile.
belisknerprime said:
Well, I sure hope I didn't jack up my new phone for good.
I was using odin to get OUDHS CWM-Based Recovery 1.0.3.3 working.
I booted the phone into download mode, then connected and waited for my phone to be recognized. I selected the correct tar and hit start.
It failed on the first write section, and I couldn't get it to continue so i turned my phone off and tried to boot into download mode again. Now no matter what I do it gives me the "firmware upgrade failed" message and tells me to connect to Kies, but Kies will not detect my device.
Any ideas?
For reference I was following http://forum.xda-developers.com/showthread.php?t=2260031 to the letter.
I will continue to work on this for awhile.
Click to expand...
Click to collapse
If you can still get into download mode try using odin to flash a complete firmware made for your specific device and obtained from sammobile.com
Sent from my GT-P7510 using xda app-developers app
re: Odin flash
belisknerprime said:
Well, I sure hope I didn't jack up my new phone for good.
I was using odin to get OUDHS CWM-Based Recovery 1.0.3.3 working.
I booted the phone into download mode, then connected and waited for my phone to be recognized. I selected the correct tar and hit start.
It failed on the first write section, and I couldn't get it to continue so i turned my phone off and tried to boot into download mode again. Now no matter what I do it gives me the "firmware upgrade failed" message and tells me to connect to Kies, but Kies will not detect my device.
Any ideas?
For reference I was following http://forum.xda-developers.com/showthread.php?t=2260031 to the letter.
I will continue to work on this for awhile.
Click to expand...
Click to collapse
If I were you I would forget about KIES and uninstall it along with any other samsung applications and drivers
you have on your computer, then reboot your computer and download only the Samsung USB Drivers.
Once you have the latest samsung usb drivers install it and restart your computer.
That way you will have a clean start, and if the screen of your phone displays
anything at all, especially if it displays something about kies then that proves that
your phone will go into download mode if it's done properly.
Press the volume down, home and the power button at the same time until the phone vibrates
and then let go of the power button first before letting go of the other two buttons.
Before you do any of this, you need to download the stock Samsung Jellybean
v4.2.2 M919 MDL Touchwiz Odin flash firmware.
Here is the link to download it: http://k0nane.info/rom/M919UVUAMDL_M919TMBAMDL_TMB.zip
Here is the latest Samsung USB Drivers download: http://downloadcenter.samsung.com/c...ng_USB_Driver_for_Mobile_Phones_v1.5.14.0.exe
Well did finally get Kies to pick up the phone but it just gets stuck on connecting. How is anyone supposed to do a firmware recovery if the phone cant be connected to?
I will try what you said and uninstall and only install the usb drivers.
And to answer your question I can't get into download mode, it just skips right to the Firmware upgrade error.
Although in the top left of the screen I see this:
ODIN MODE
Product Name: SGH-M919
Current Binary: Custom
System Status: Official
CSB-OEM_CONFIG_LSB: 0x30
Write Protection: Enable
Does that mean anything?
belisknerprime said:
Well did finally get Kies to pick up the phone but it just gets stuck on connecting. How is anyone supposed to do a firmware recovery if the phone cant be connected to?
I will try what you said and uninstall and only install the usb drivers.
And to answer your question I can't get into download mode, it just skips right to the Firmware upgrade error.
Although in the top left of the screen I see this:
ODIN MODE
Product Name: SGH-M919
Current Binary: Custom
System Status: Official
CSB-OEM_CONFIG_LSB: 0x30
Write Protection: Enable
Does that mean anything?
Click to expand...
Click to collapse
Then do it the old fashion way, pull the battery out of the phone
and while pressing the volume down/home/power buttons put
the battery back in and see if that gets it into download mode.
(I hope your phone is a Tmobile M919 and not the international version or a variant like the M919V).
Misterjunky said:
Then do it the old fashion way, pull the battery out of the phone
and while pressing the volume down/home/power buttons put
the battery back in and see if that gets it into download mode.
(I hope your phone is a Tmobile M919 and not the international version or a variant like the M919V).
Click to expand...
Click to collapse
Yes, it's is the T-Mobile version. It has the case branding and everything. I got it straight from them.
Ah, that did it! I'm now back in download mode. Thank you.
I'm downloading the stock firmware, it will take about an hour. Should I attempt to flash the OUDHS recovery again, or wait and just flash the stock JB firmware?
re: stock jb
belisknerprime said:
Yes, it's is the T-Mobile version. It has the case branding and everything. I got it straight from them.
Ah, that did it! I'm now back in download mode. Thank you.
I'm downloading the stock firmware, it will take about an hour. Should I attempt to flash the OUDHS recovery again, or wait and just flash the stock JB firmware?
Click to expand...
Click to collapse
You are downloading the STOCK JB firmware now....
After your phone is up and running reboot into download mode and you will need to Odin flash the OUDHS recovery TAR file: http://d-h.st/jTk
Once that's flashed you will need to go into OUDHS recovery and flash this superuser.zip file: http://www.shabbypenguin.com/Android/Scripts/Nexus-Files/Root/Superuser-1.0.1.1.zip
After flashing the superuser.zip reboot the phone.
Just to play it safe, after you reboot the phone reboot it again in recovery and flash this:http://batakang.com/ftp/SGH-M919/ROOT_M919UVUAMDL.zip
This will setup your kernel to be 100% un-restricted so there will be no chance that you will loose root access.
NOTE: If you want to keep your phone STOCK then after odin flashing the JB stock firmware don't do anything else.
Good luck!
Thank you for the help. One question though, Do i continue to use the PDA button on odin for the JB flash like I was instructed for the other thing or do I use the phone button?
FWIW home button is not needed on the S4 to enter recovery or download mode. I love it Just hold down one of the volume buttons as its booting and voila
belisknerprime said:
Thank you for the help. One question though, Do i continue to use the PDA button on odin for the JB flash like I was instructed for the other thing or do I use the phone button?
Click to expand...
Click to collapse
Use the PDA button. I *believe* the phone button is only for flashing modem files.
belisknerprime said:
Thank you for the help. One question though, Do i continue to use the PDA button on odin for the JB flash like I was instructed for the other thing or do I use the phone button?
Click to expand...
Click to collapse
Yes. only use the PDA button
I'm trying to goto stock firmware MDL. Downloaded the right 1.7G file and the 3.07 version of odin.
Put the S4 in download mode,but I see auth fail once the ODIN process starts.
I'm reading this thread:
http://forum.xda-developers.com/showthread.php?t=2483380
Do I need to do the PIT step as well ? ( If yes, where do I find the stock pit files for the S4 US Tmobile?
I grabbed the SGH-M919-TMB-M919UVUAMDL-1366964131*.md5 to use in odin->pda section
My phone is still bricked. Pls help
didadi said:
I'm trying to goto stock firmware MDL. Downloaded the right 1.7G file and the 3.07 version of odin.
Put the S4 in download mode,but I see auth fail once the ODIN process starts.
I'm reading this thread:
http://forum.xda-developers.com/showthread.php?t=2483380
Do I need to do the PIT step as well ? ( If yes, where do I find the stock pit files for the S4 US Tmobile?
I grabbed the SGH-M919-TMB-M919UVUAMDL-1366964131*.md5 to use in odin->pda section
My phone is still bricked. Pls help
Click to expand...
Click to collapse
Make sure your cable is good and try different USB port on pc.
Also which firmware are you on?
☞ Sent from here☜???
I've used 2 cables already and different USB. . I think the pit file is what I may have to check agian,as this seems debugging ODIN failures. Can somebody post me S4, Tmo 16GB stock pit file?
I'm on MK2 firmware. I'm trying to go back to stock firmware/4.2.2.
The exact err I'm getting is:
---
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1).
---
What is the way out here? Have I totally bricked my phone? xda or elsewhere not showing a workable solution yet. (Still searching)
(SOFT BRICKED)
while i tried to install cwm using odin in download mode odin shows till setupconnection and after that nothing happens then i removed and switch on my phone then it shows firmware update failed connect via kies for firmware recovery..i downloaded fw from sammobile and tried to flash u
sing odin in down load mode tn
Odin detects comport
i Loaded pda
then click start in odin but it shows fail after sometime :crying:
Gintu said:
(SOFT BRICKED)
while i tried to install cwm using odin in download mode odin shows till setupconnection and after that nothing happens then i removed and switch on my phone then it shows firmware update failed connect via kies for firmware recovery..i downloaded fw from sammobile and tried to flash u
sing odin in down load mode tn
Odin detects comport
i Loaded pda
then click start in odin but it shows fail after sometime :crying:
Click to expand...
Click to collapse
if u can't boot, try to flash ur stock rom again first.
in flashing cwm via odin, u don't need to put anything aside from ops (ancora ops), one package (recovery .md5 file)
guides: follow them strictly!
[HowTo] Flash a firmware with ODIN on Samsung Galaxy W(I8150)
[GUIDE] How to flash CWM6 with Odin on Samsung Galaxy W(I8150)
dec0der said:
if u can't boot, try to flash ur stock rom again first.
in flashing cwm via odin, u don't need to put anything aside from ops (ancora ops), one package (recovery .md5 file)
guides: follow them strictly!
[HowTo] Flash a firmware with ODIN on Samsung Galaxy W(I8150)
[GUIDE] How to flash CWM6 with Odin on Samsung Galaxy W(I8150)
Click to expand...
Click to collapse
Thanks bro..thank u so much i fixed it:laugh:
Gintu said:
Thanks bro..thank u so much i fixed it:laugh:
Click to expand...
Click to collapse
no problem next time, if ur not sure what to do, ask here b4 doing anything :good:
dec0der said:
no problem next time, if ur not sure what to do, ask here b4 doing anything :good:
Click to expand...
Click to collapse
sure
Please help I have a ace 2 tried to root it but I must of used old version has I'm stuck on where it says ace 2 gt-i8160 I can go into both download mode and recovery I've cleared chache reset it rebooted it still no joy it won't connect to kies or Odin and when in recovery mode it say can't acces to ' /system/csc/BTU/system any help would be nice thank you
Are you sure you can't enter to download mode (vol down + home + power)?
Rox said:
Are you sure you can't enter to download mode (vol down + home + power)?
Click to expand...
Click to collapse
Hi yes I can enter both download an recovery modes
opps misread
are you on Jelly Bean or GingerBread ?
Rox said:
opps misread
are you on Jelly Bean or GingerBread ?
Click to expand...
Click to collapse
Jelly bean an i personally believe I have tried rooting it from a old version ment for gingerbread
possible you flashed gb root kernel...
rooting jb is simplier, just flash Root.zip from this thread
but, you cant do it now because you have wrong kernel on your phone.
have you tried redownloading usb drivers to get your phone recognized by odin.
because if you connect phone to odin simply flash new fw over...
Rox said:
possible you flashed gb root kernel...
rooting jb is simplier, just flash Root.zip from this thread
but, you cant do it now because you have wrong kernel on your phone.
have you tried redownloading usb drivers to get your phone recognized by odin.
because if you connect phone to odin simply flash new fw over...
Click to expand...
Click to collapse
Where is the best place to get them from both the drivers an new fw sorry to be a pain
http://forum.xda-developers.com/showthread.php?p=11633550#post11633550 - Drivers
http://forum.xda-developers.com/showthread.php?t=2340849 - Firmwares thread
Also am I using the correct version of Odin Odin3 v3.07
yes, you can use 3.07
So install drivers unzip files put phone in download mode connect an hopefully my poorer little phone will be back now Odin won't open argh
Rox said:
yes, you can use 3.07
Click to expand...
Click to collapse
Big massive thank you I'm back up an running now how do I root lol
just flash Root.zip from this thread
Rox said:
just flash Root.zip from this thread
Click to expand...
Click to collapse
Is this fine for ace 2
Fennybad said:
Is this fine for ace 2
Click to expand...
Click to collapse
Yes it is. This is a bit universal JB root method - worked on SII with JB too...
Hi guys
Today i buy a galaxy tab 3 sm-T210R
1 - how to root it?
2 - the stock firmware is 4.1.2 , what is the latest stock firmware for it?pls give me a link.
3 - does this device support simcard?
4 - one of my friend told me that it is locked.what that it means?how to know that it is lock or unlock?how to unlock it?
Thanks
muiacir said:
Hi guys
Today i buy a galaxy tab 3 sm-T210R
1 - how to root it?
2 - the stock firmware is 4.1.2 , what is the latest stock firmware for it?pls give me a link.
3 - does this device support simcard?
4 - one of my friend told me that it is locked.what that it means?how to know that it is lock or unlock?how to unlock it?
Thanks
Click to expand...
Click to collapse
1. http://forum.xda-developers.com/showthread.php?t=2437219
2. You have the latest firmware - http://www.samsungis.com/Firmwares/SM-T210R.html.
3. No, the device does not support a simcard.
4. The device is WiFi only and is not locked. Phones in the US are locked to specific carriers. To unlock the phone means to allow the phone to work on any carrier.
Brian D said:
1. http://forum.xda-developers.com/showthread.php?t=2437219
2. You have the latest firmware - http://www.samsungis.com/Firmwares/SM-T210R.html.
3. No, the device does not support a simcard.
4. The device is WiFi only and is not locked. Phones in the US are locked to specific carriers. To unlock the phone means to allow the phone to work on any carrier.
Click to expand...
Click to collapse
The topic for tw recovery and another topic for cwm recovery did not work and i still have the stock recovery.
Is there another way to root the device with no installung the pre-rooted firmware? I want the stock firmware
muiacir said:
The topic for tw recovery and another topic for cwm recovery did not work and i still have the stock recovery.
Is there another way to root the device with no installung the pre-rooted firmware? I want the stock firmware
Click to expand...
Click to collapse
The recovery and root works, you must unchecked the auto reboot by odin, after flashing boot manuly with the 3 combo keys into the revovery andflash the xxxroot.zip.
muiacir said:
The topic for tw recovery and another topic for cwm recovery did not work and i still have the stock recovery.
Is there another way to root the device with no installung the pre-rooted firmware? I want the stock firmware
Click to expand...
Click to collapse
All of my posted recoveries work fine. You didn't follow the directions close enough. Make sure you flash the universal root.zip once you get the recovery working. If not, it will re-install the stock recovery automatically.
Please explain how you are trying to add TWRP or CWM to your device. Do not leave out any details. This what we can see if you are missing a step. It should be a very simple process if the steps are followed correctly (as mentioned above). So please explain how you are doing it and what tools you are using.
Thanks
Brian D said:
1. http://forum.xda-developers.com/showthread.php?t=2437219
2. You have the latest firmware - http://www.samsungis.com/Firmwares/SM-T210R.html.
3. No, the device does not support a simcard.
4. The device is WiFi only and is not locked. Phones in the US are locked to specific carriers. To unlock the phone means to allow the phone to work on any carrier.
Click to expand...
Click to collapse
gr8nole said:
All of my posted recoveries work fine. You didn't follow the directions close enough. Make sure you flash the universal root.zip once you get the recovery working. If not, it will re-install the stock recovery automatically.
Click to expand...
Click to collapse
Brian D said:
Please explain how you are trying to add TWRP or CWM to your device. Do not leave out any details. This what we can see if you are missing a step. It should be a very simple process if the steps are followed correctly (as mentioned above). So please explain how you are doing it and what tools you are using.
Thanks
Click to expand...
Click to collapse
Thanks guys
1 - i go into download mode
2 - i open the odin v3.07(in win 8 that all the usb drivers were installed)
3 - then i connect the device to the computer via cable
4 - in the odin , the device added succesfully.
5 - i add the .tar file into pda and then uncheck the auto-reboot and f-partition
6 - i press start and it succesfully insralled(the odein said res ok and a green color upright said pass)
7 - i fo not go to the os , i directlly pres home and lower volme and power and directlly go to the recovery but still the recovery is stock recovery
muiacir said:
Thanks guys
1 - i go into download mode
2 - i open the odin v3.07(in win 8 that all the usb drivers were installed)
3 - then i connect the device to the computer via cable
4 - in the odin , the device added succesfully.
5 - i add the .tar file into pda and then uncheck the auto-reboot and f-partition
6 - i press start and it succesfully insralled(the odein said res ok and a green color upright said pass)
7 - i fo not go to the os , i directlly pres home and lower volme and power and directlly go to the recovery but still the recovery is stock recovery
Click to expand...
Click to collapse
I think step 7 is where you might be going wrong. Again, I THINK, I could be mistaken. But I would say start the tablet in normal mode before attempting to go into recovery. After the tablet starts, go ahead and shut it down. Then try and go into recovery mode.
Also, did you start Odin as an administrator? It sounds like you are OK in that regard as you got it going and loading. But if you are still having problems then try executing Odin as administrator.
Which .tar file are you loading? Is it one of the recovery files such as TWRP or CWM?
The only other thing might be the version of recovery you are trying to load. Make sure it works with your tab and firmware. I am sure you have already checked that, but just in case you forgot.
Brian D said:
I think step 7 is where you might be going wrong. Again, I THINK, I could be mistaken. But I would say start the tablet in normal mode before attempting to go into recovery. After the tablet starts, go ahead and shut it down. Then try and go into recovery mode.
Also, did you start Odin as an administrator? It sounds like you are OK in that regard as you got it going and loading. But if you are still having problems then try executing Odin as administrator.
Which .tar file are you loading? Is it one of the recovery files such as TWRP or CWM?
The only other thing might be the version of recovery you are trying to load. Make sure it works with your tab and firmware. I am sure you have already checked that, but just in case you forgot.
Click to expand...
Click to collapse
Ok i will test that(going to recovery after going to os)
What version should i use? I tested both of the tw and cwm
muiacir said:
Ok i will test that(going to recovery after going to os)
What version should i use? I tested both of the tw and cwm
Click to expand...
Click to collapse
In your number 7, you should be holding volume up to get into recovery. When you see the Tab 3 logo, release the power button but continue holding home and volume up until you get into recovery.
Sent from my SCH-I605
gr8nole said:
In your number 7, you should be holding volume up to get into recovery. When you see the Tab 3 logo, release the power button but continue holding home and volume up until you get into recovery.
Sent from my SCH-I605
Click to expand...
Click to collapse
My fault ..... i mean volume up but still stock recovery
muiacir said:
My fault ..... i mean volume up but still stock recovery
Click to expand...
Click to collapse
I'm not sure wath you are doing wrong.
Here are a link to a vid from Tomsgt , " How to install TWRP and root", when you are following the step you can root you Tab.
http://m.youtube.com/watch?feature=youtu.be&v=BDShwBHRjUE
i don't know how i did that stupid thing ! i'm using note 2 gt-n7100 ( rooted ) i tried to install a new rom that doesn't built for my phone with " mobile odin v 4.2 pro unfortunately it flashed the sumsung star dous stock rom on my mobile but it doesn't boot .. i entered the philz touch recovery menu and select clean to install a new rom and restore my old rom and the problems started to appear !
the first thing is when i press the power button to lock my note 2 and try to open it again i find no response at all and the only way is to remove the battery and re turn it on again and try not to press the lock button as if i do so my mobile gives me no response and the screen doesn't turn on !
the second matter i noticed that when the start up i found the bluetooth icon trying to turn to green like i'm turning the bluetooth on but a few seconds it didn't turn on even i try to turn it ! the bluetooth doesn't work at all !
the third thing when i recieve a call that turn on the proximty sensor automatically if i touch the sensor the screen go black but i lose the control and give me no response at all and i have to remove the battery and turn it on again !
the things i noticed when i flashed the galaxy star rom with mobile odin that it has partion called param and the note to doesn't have it with its rom but have partion called modem which i didn't found in the galaxy star rom !
i need help please how i delete things that caused that conflict .. i tried to reflash the stock rom of my note with odin on my lap top but nothig changed and it hanging and the screen freezes with no control at all and that happened when i try to use a custom rom and flash it through the recovery .. please help urgently
sorry for my bad english
Two options I see:
1. Try to restore your device using Kies3
2. Flash newest firmware (get it from sammobile) for your region using PC-Odin.
Putting "need help urgently please :'(" does not help you in any way, in fact it makes it more likely that people will simply ignore the topic. Topic titles need to be descriptive, not generic non-descriptive.
Your problem is that like many newbies you cant be bothered to do research, read and learn before messing around with your device.
You should boot into download mode and flash a stock rom. Preferably a older one that doesn't have knox. Then flash a stock rom(without knox) in recovery mode. All the info you need is here on forum.
Androidwizzard said:
Two options I see:
1. Try to restore your device using Kies3
2. Flash newest firmware (get it from sammobile) for your region using PC-Odin.
Click to expand...
Click to collapse
i forgot to tell that one of the things changed that my mobile lost the usb support in the normal mode as there is no change when i connect it to my pc except it charges only but it works in the download mode and when i reflash the stock rom v 4.3 the screen freezes after a few seconds of turning it on and i have to remove the battery .. do you think that flashing the 4.4.2 sthock rom will make a change ? as the solution of kies isn't possible due to the lack of usb support !
is there a way to format the sectors that the pation " param " which flashed by the sumsung star dous stock rom is in it and make that conflict to delete that ??
What was your last stock rom on your device before messing up?
I do absolutely not agree with those horror tales about knox, most people don't use and easily get rid of.
Do you remember your last bootloader? MK4 or above? Then don't take any risk by flashing 4.3 firmware and go straight ahead to 4.4.2.
It will be the safest way to get a working device again.
TheATHEiST said:
Putting "need help urgently please :'(" does not help you in any way, in fact it makes it more likely that people will simply ignore the topic. Topic titles need to be descriptive, not generic non-descriptive.
Your problem is that like many newbies you cant be bothered to do research, read and learn before messing around with your device.
You should boot into download mode and flash a stock rom. Preferably a older one that doesn't have knox. Then flash a stock rom(without knox) in recovery mode. All the info you need is here on forum.
Click to expand...
Click to collapse
i'm sorry for the way i show my problem as i'm a newbie already .. it that possible to downgrade my rom ? i will try install 4.1.2 rom then flasing the 4.4.2 one but when i flashed the 4.3 stock rom the screen freezes and nothing changed what do you think of that ? it there's a way to delete the " param " found in the sumsung galaxy star dous rom ? i think that made this conflict but try to explain to me why flashing an old rom then a new one without knox ? what will that do ?
Androidwizzard said:
What was your last stock rom on your device before messing up?
I do absolutely not agree with those horror tales about knox, most people don't use and easily get rid of.
Do you remember your last bootloader? MK4 or above? Then don't take any risk by flashing 4.3 firmware and go straight ahead to 4.4.2.
It will be the safest way to get a working device again.
Click to expand...
Click to collapse
i was using dn3 rom which has android version v 4.4.2 but i enter the recovery and restored the stock rom v 4.3 and it works with no problem and it was the last rom i use it when i flashed the star dous rom through the mobile odin in my mobile .. is there is a things i must do when i'm flashin the rom through the pc odin ? like check the repartion option or some thing else ?
my bootloader version is : n7100xxuena1 what that mean ?
omar youssef said:
i was using dn3 rom which has android version v 4.4.2 but i enter the recovery and restored the stock rom v 4.3 and it works with no problem and it was the last rom i use it when i flashed the star dous rom through the mobile odin in my mobile .. is there is a things i must do when i'm flashin the rom through the pc odin ? like check the repartion option or some thing else ?
my bootloader version is : n7100xxuena1 what that mean ?
Click to expand...
Click to collapse
So you can also try the NA1 firmware, but nothing beneath that. NA1 is a knox enabled BL, so whatever you flash successfully will have Knox in it.
DON'T TICK REPARTITION!
Androidwizzard said:
So you can also try the NA1 firmware, but nothing beneath that. NA1 is a knox enabled BL, so whatever you flash successfully will have Knox in it.
DON'T TICK REPARTITION!
Click to expand...
Click to collapse
what you mean of the NA1 firmware if you mean the 4.3 stock rom i flashed it with the pc odin and my mobile screen freezes as i told you and nothing changed .. give me obvious steps 1 2 3 to do it to solve this problem and if you can give me a suitable download links .. now you know all the issues with my mobile and thanks for your interst
omar youssef said:
what you mean of the NA1 firmware if you mean the 4.3 stock rom i flashed it with the pc odin and my mobile screen freezes as i told you and nothing changed .. give me obvious steps 1 2 3 to do it to solve this problem and if you can give me a suitable download links .. now you know all the issues with my mobile and thanks for your interst
Click to expand...
Click to collapse
1) Go to Sammobile
2) Find firmware for your region -> download
3) Find Odin 3.09 -> download and install
4) Start Odin 3.09
5) Plugin device -> see if Odin displays active com port
6) Go into download mode
7) Link firmware download in tab PDA/AP
8) Let Odin check md5
9) Press start button
10) Wait until display of com port in Odin turns green and says success.
All these steps could also be found with an easy Google search or in Youtube tutorials
Androidwizzard said:
1) Go to Sammobile
2) Find firmware for your region -> download
3) Find Odin 3.09 -> download and install
4) Start Odin 3.09
5) Plugin device -> see if Odin displays active com port
6) Go into download mode
7) Link firmware download in tab PDA/AP
8) Let Odin check md5
9) Press start button
10) Wait until display of com port in Odin turns green and says success.
All these steps could also be found with an easy Google search or in Youtube tutorials
Click to expand...
Click to collapse
Thanks for your work but I did all these steps but my mobile freezes and noying changed fir sorry .. I flashed the 4.4.2 kitkat stock rom which is the latest one !
omar youssef said:
Thanks for your work but I did all these steps but my mobile freezes and noying changed fir sorry .. I flashed the 4.4.2 kitkat stock rom which is the latest one !
Click to expand...
Click to collapse
OK, I see. Try a wipe from stock recovery, wipe all possible.
Another option: Kies!
I know, you said not recognized but you must get it to work. Uninstall all drivers from PC an re-install drivers until Kies can restore your device.
Very last option: Find a Samsung repair near to you.
Androidwizzard said:
OK, I see. Try a wipe from stock recovery, wipe all possible.
Another option: Kies!
I know, you said not recognized but you must get it to work. Uninstall all drivers from PC an re-install drivers until Kies can restore your device.
Very last option: Find a Samsung repair near to you.
Click to expand...
Click to collapse
Look I searched the internet find something I think it will be useful if we can use it successfully called n7100 rescue rom consists of 5 files in one zip file it is the fully original factory rom but unfortunately it's 4.1.2 jellybean so how can I flash this rom successfully ? Is it possible downgrade the bootloader first or what ?? Please help
omar youssef said:
Look I searched the internet find something I think it will be useful if we can use it successfully called n7100 rescue rom consists of 5 files in one zip file it is the fully original factory rom but unfortunately it's 4.1.2 jellybean so how can I flash this rom successfully ? Is it possible downgrade the bootloader first or what ?? Please help
Click to expand...
Click to collapse
As you mentioned you already have been on NA1 firmware and as it seems you have flashed latest 4.4.2 with "a kind of success" I find it hope- and useless to even try this rescue rom. Bootloader is the reason why you can't successfully flash. NO DOWNGRADE POSSIBLE.
Androidwizzard said:
As you mentioned you already have been on NA1 firmware and as it seems you have flashed latest 4.4.2 with "a kind of success" I find it hope- and useless to even try this rescue rom. Bootloader is the reason why you can't successfully flash. NO DOWNGRADE POSSIBLE.
Click to expand...
Click to collapse
Can you illustrate your words ? For kies it's unpossible to connect my mobile to any pc the drivers works perfectly for any similarphone the fault is in my mobile not the driver and for sumsung care it will be high cost as the warranty ended ! And I wipe every thing possible through the stock recovery but noyhing changed !
I am beginning to lose my patience cause you don't follow my advice or even don't consider that I am right.
Look into system on your PC if there is an unknown device.
Whenever hardware is connected to PC Windows starts to search for drivers.
It doesn't matter that other devices are recognized correctly.
Wipe all Samsung drivers and re-install. Even re-install Kies too.
Start Kies and try restoration, maybe it will fail, but try. AND with current drivers you are supposed to fail.
At last: Try to find a friend with knowledge who can help you at your home or his.