Related
I just got my phone and i rooted it and downloaded clockwork recovery but i got it from someone else and the only way to get rid of his info was to factory reset which i did while it was rooted now my phone wont go past the galaxy gio screen i trick 1 click unbrick and odin i downloaded the pack so i have all of them and the ops and pit file and the original firmware and the samsung usb driver for mobile but odins com port wont recognize my phone the guy i bought it from got it in kuwait so its the arabic version of gt-s5660 could that be the problem
johnny7788 said:
I just got my phone and i rooted it and downloaded clockwork recovery but i got it from someone else and the only way to get rid of his info was to factory reset which i did while it was rooted now my phone wont go past the galaxy gio screen i trick 1 click unbrick and odin i downloaded the pack so i have all of them and the ops and pit file and the original firmware and the samsung usb driver for mobile but odins com port wont recognize my phone the guy i bought it from got it in kuwait so its the arabic version of gt-s5660 could that be the problem
Click to expand...
Click to collapse
can u try another computer with same ver of firmware & odin
johnny7788 said:
I just got my phone and i rooted it and downloaded clockwork recovery but i got it from someone else and the only way to get rid of his info was to factory reset which i did while it was rooted now my phone wont go past the galaxy gio screen i trick 1 click unbrick and odin i downloaded the pack so i have all of them and the ops and pit file and the original firmware and the samsung usb driver for mobile but odins com port wont recognize my phone the guy i bought it from got it in kuwait so its the arabic version of gt-s5660 could that be the problem
Click to expand...
Click to collapse
As you are getting Galaxy Gio splash screen, its just a soft brick. Make sure you've installed Samsung Kies and make sure its not running in background (Check the Taskbar systray) while you run Odin. Download the firmware from sammobile.com and install as mentioned in Tutorial (You may find it in the Galaxy Gio section)
Dont use the pit its from later galaxy models
Make sure u flash galaxy gio FW and look for the guides in thr GIO section
Sent from my ST25i using xda app-developers app
tried it
coolsandie said:
As you are getting Galaxy Gio splash screen, its just a soft brick. Make sure you've installed Samsung Kies and make sure its not running in background (Check the Taskbar systray) while you run Odin. Download the firmware from sammobile.com and install as mentioned in Tutorial (You may find it in the Galaxy Gio section)
Click to expand...
Click to collapse
ive used 3 different versions of odin 4.38 4.42 and odin3 v1.85 I cant get to the splash screen just the galaxy gio screen only odin3 v1.85 can read it but at the galaxy gio screen not in download mode ive tried 1click unsoft brick it asks me if my phone is plugged in and in download mode ive made sure kies wasn't running as well everytime I tried and kies 2.0 doesn't support my device it tells me,and that's also at the galaxy gio screen in download mode it doesn't even show up im also running windows 8 as well if that helps anyone figure this problem out for me
used new ops files too
SpaceCaker said:
Dont use the pit its from later galaxy models
Make sure u flash galaxy gio FW and look for the guides in thr GIO section
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
ive used the pit file but not before I used gio v1.0 ops and cooper ops files also none worked
Soft bricked Gio
I rooted my gio with the gio rooting package and tried to flash cwm recovery. Unfortunatlely I forgot to reset and uncheck re-partition and now my phone gives me the Phone---!----computer logo when I boot. (soft brick I think) Even though I have kies, it now does not recognise my phone, and nor does odin. In addition, I need the 2.3.6 Gingerbread NZ stock rom from 2degrees, yet I cannot find it on any of the sites I visit. I can get into download mode but not recovery... can anyone help? Any help will be appreciated, if it is possible to fix my phone
s4meq said:
I rooted my gio with the gio rooting package and tried to flash cwm recovery. Unfortunatlely I forgot to reset and uncheck re-partition and now my phone gives me the Phone---!----computer logo when I boot. (soft brick I think) Even though I have kies, it now does not recognise my phone, and nor does odin. In addition, I need the 2.3.6 Gingerbread NZ stock rom from 2degrees, yet I cannot find it on any of the sites I visit. I can get into download mode but not recovery... can anyone help? Any help will be appreciated, if it is possible to fix my phone
Click to expand...
Click to collapse
ClockworkMod (cwm) http://forum.xda-developers.com/showthread.php?t=1421650
ODIN Multi Downloader 4.42:http://www.samsungupdate.com/android-how-to/what-odin-version-you-need-for-your-phone
Download GIO_v1.0,ops:http://HERE
gb_root:http://forum.xda-developers.com/showthread.php?t=1766178
http://www.sammobile.com/firmwares/
Phone now repaired
ptugalx said:
ClockworkMod (cwm) http://forum.xda-developers.com/showthread.php?t=1421650
ODIN Multi Downloader 4.42:http://www.samsungupdate.com/android-how-to/what-odin-version-you-need-for-your-phone
Download GIO_v1.0,ops:http://HERE
gb_root:http://forum.xda-developers.com/showthread.php?t=1766178
http://www.sammobile.com/firmwares/
Click to expand...
Click to collapse
My phone is now repaired, considering update.zip for 2.3.5. I will like to know if the recovery mentioned above requires a custom kernel- is it necessary? BTW I am not using Rom manager.
s4meq said:
My phone is now repaired, considering update.zip for 2.3.5. I will like to know if the recovery mentioned above requires a custom kernel- is it necessary? BTW I am not using Rom manager.
Click to expand...
Click to collapse
Does not require a custom-kernel.
upgrade to 2.3.6 and install this cwm.
cwm-5.0.2.7-ext4+rfs-odin.tar.md5 (Flash With ODIN)
can't update
ptugalx said:
Does not require a custom-kernel.
upgrade to 2.3.6 and install this cwm.
cwm-5.0.2.7-ext4+rfs-odin.tar.md5 (Flash With ODIN)
Click to expand...
Click to collapse
No, 2.3.5 is the latest version for my phone's firmware (so no update to 2.3.6)... will I still be able to use this?Please tell me. Also I am considering installing through recovery instead.
s4meq said:
No, 2.3.5 is the latest version for my phone's firmware (so no update to 2.3.6)... will I still be able to use this?Please tell me. Also I am considering installing through recovery instead.
Click to expand...
Click to collapse
see it here_http://forum.xda-developers.com/showthread.php?t=1342190
Thanks
ptugalx said:
see it here_http://forum.xda-developers.com/showthread.php?t=1342190
Click to expand...
Click to collapse
Well, just installed through recovery and pheixz CWM recovery works like a charm. I am now using cm 9 by maclaw. Just a signal problem as this phone was bought from overseas
s4meq said:
A signal problem as this phone was bought from overseas
Click to expand...
Click to collapse
Flash your country's baseband.
Thanks
waqaswasil said:
Flash your country's baseband.
Click to expand...
Click to collapse
This is what Im doing, but why odin v3.09? I have the ops file and the correct version of Odin. (v4.42)
http://www.sammobile.com/firmwares/3/?download=8660
I also want just the baseband.
I did it, but..
waqaswasil said:
Flash your country's baseband.
Click to expand...
Click to collapse
Still a signal problem on maclaws cyanogenmod. Maybe I should have flashed the PDA instead (S5660XXKT6) not the MODEM...
http://www.sammobile.com/firmwares/3/?download=8660
I want to try Maclaw's ASOP platform. What filesystem does it use? EXT4 or RFS?
s4meq said:
Still a signal problem on maclaws cyanogenmod. Maybe I should have flashed the PDA instead (S5660XXKT6) not the MODEM...
http://www.sammobile.com/firmwares/3/?download=8660
I want to try Maclaw's ASOP platform. What filesystem does it use? EXT4 or RFS?
Click to expand...
Click to collapse
Maybe You Have A Hardware (Antenna) Problem, Not A Software (Baseband) Problem
All Custom ROMs Use EXT4 Filesystem
BTW Its AOSP. Not ASOP :silly:
waqaswasil said:
Maybe You Have A Hardware (Antenna) Problem, Not A Software (Baseband) Problem
All Custom ROMs Use EXT4 Filesystem
BTW Its AOSP. Not ASOP :silly:
Click to expand...
Click to collapse
No... There was no water damage, only 1 drop 2 years ago which the phone survived. It was from knee height. I flashed the S5660KKT3 baseband through Odin. Is it the right one? Also, my phone was broken and I got it repaired. when it came back the signal was 5 bars, when I put my SIM card in, but when I installed maclaw's cm9 it was poor. Reboots seem to fix the problem.
Well, I sure hope I didn't jack up my new phone for good.
I was using odin to get OUDHS CWM-Based Recovery 1.0.3.3 working.
I booted the phone into download mode, then connected and waited for my phone to be recognized. I selected the correct tar and hit start.
It failed on the first write section, and I couldn't get it to continue so i turned my phone off and tried to boot into download mode again. Now no matter what I do it gives me the "firmware upgrade failed" message and tells me to connect to Kies, but Kies will not detect my device.
Any ideas?
For reference I was following http://forum.xda-developers.com/showthread.php?t=2260031 to the letter.
I will continue to work on this for awhile.
belisknerprime said:
Well, I sure hope I didn't jack up my new phone for good.
I was using odin to get OUDHS CWM-Based Recovery 1.0.3.3 working.
I booted the phone into download mode, then connected and waited for my phone to be recognized. I selected the correct tar and hit start.
It failed on the first write section, and I couldn't get it to continue so i turned my phone off and tried to boot into download mode again. Now no matter what I do it gives me the "firmware upgrade failed" message and tells me to connect to Kies, but Kies will not detect my device.
Any ideas?
For reference I was following http://forum.xda-developers.com/showthread.php?t=2260031 to the letter.
I will continue to work on this for awhile.
Click to expand...
Click to collapse
If you can still get into download mode try using odin to flash a complete firmware made for your specific device and obtained from sammobile.com
Sent from my GT-P7510 using xda app-developers app
re: Odin flash
belisknerprime said:
Well, I sure hope I didn't jack up my new phone for good.
I was using odin to get OUDHS CWM-Based Recovery 1.0.3.3 working.
I booted the phone into download mode, then connected and waited for my phone to be recognized. I selected the correct tar and hit start.
It failed on the first write section, and I couldn't get it to continue so i turned my phone off and tried to boot into download mode again. Now no matter what I do it gives me the "firmware upgrade failed" message and tells me to connect to Kies, but Kies will not detect my device.
Any ideas?
For reference I was following http://forum.xda-developers.com/showthread.php?t=2260031 to the letter.
I will continue to work on this for awhile.
Click to expand...
Click to collapse
If I were you I would forget about KIES and uninstall it along with any other samsung applications and drivers
you have on your computer, then reboot your computer and download only the Samsung USB Drivers.
Once you have the latest samsung usb drivers install it and restart your computer.
That way you will have a clean start, and if the screen of your phone displays
anything at all, especially if it displays something about kies then that proves that
your phone will go into download mode if it's done properly.
Press the volume down, home and the power button at the same time until the phone vibrates
and then let go of the power button first before letting go of the other two buttons.
Before you do any of this, you need to download the stock Samsung Jellybean
v4.2.2 M919 MDL Touchwiz Odin flash firmware.
Here is the link to download it: http://k0nane.info/rom/M919UVUAMDL_M919TMBAMDL_TMB.zip
Here is the latest Samsung USB Drivers download: http://downloadcenter.samsung.com/c...ng_USB_Driver_for_Mobile_Phones_v1.5.14.0.exe
Well did finally get Kies to pick up the phone but it just gets stuck on connecting. How is anyone supposed to do a firmware recovery if the phone cant be connected to?
I will try what you said and uninstall and only install the usb drivers.
And to answer your question I can't get into download mode, it just skips right to the Firmware upgrade error.
Although in the top left of the screen I see this:
ODIN MODE
Product Name: SGH-M919
Current Binary: Custom
System Status: Official
CSB-OEM_CONFIG_LSB: 0x30
Write Protection: Enable
Does that mean anything?
belisknerprime said:
Well did finally get Kies to pick up the phone but it just gets stuck on connecting. How is anyone supposed to do a firmware recovery if the phone cant be connected to?
I will try what you said and uninstall and only install the usb drivers.
And to answer your question I can't get into download mode, it just skips right to the Firmware upgrade error.
Although in the top left of the screen I see this:
ODIN MODE
Product Name: SGH-M919
Current Binary: Custom
System Status: Official
CSB-OEM_CONFIG_LSB: 0x30
Write Protection: Enable
Does that mean anything?
Click to expand...
Click to collapse
Then do it the old fashion way, pull the battery out of the phone
and while pressing the volume down/home/power buttons put
the battery back in and see if that gets it into download mode.
(I hope your phone is a Tmobile M919 and not the international version or a variant like the M919V).
Misterjunky said:
Then do it the old fashion way, pull the battery out of the phone
and while pressing the volume down/home/power buttons put
the battery back in and see if that gets it into download mode.
(I hope your phone is a Tmobile M919 and not the international version or a variant like the M919V).
Click to expand...
Click to collapse
Yes, it's is the T-Mobile version. It has the case branding and everything. I got it straight from them.
Ah, that did it! I'm now back in download mode. Thank you.
I'm downloading the stock firmware, it will take about an hour. Should I attempt to flash the OUDHS recovery again, or wait and just flash the stock JB firmware?
re: stock jb
belisknerprime said:
Yes, it's is the T-Mobile version. It has the case branding and everything. I got it straight from them.
Ah, that did it! I'm now back in download mode. Thank you.
I'm downloading the stock firmware, it will take about an hour. Should I attempt to flash the OUDHS recovery again, or wait and just flash the stock JB firmware?
Click to expand...
Click to collapse
You are downloading the STOCK JB firmware now....
After your phone is up and running reboot into download mode and you will need to Odin flash the OUDHS recovery TAR file: http://d-h.st/jTk
Once that's flashed you will need to go into OUDHS recovery and flash this superuser.zip file: http://www.shabbypenguin.com/Android/Scripts/Nexus-Files/Root/Superuser-1.0.1.1.zip
After flashing the superuser.zip reboot the phone.
Just to play it safe, after you reboot the phone reboot it again in recovery and flash this:http://batakang.com/ftp/SGH-M919/ROOT_M919UVUAMDL.zip
This will setup your kernel to be 100% un-restricted so there will be no chance that you will loose root access.
NOTE: If you want to keep your phone STOCK then after odin flashing the JB stock firmware don't do anything else.
Good luck!
Thank you for the help. One question though, Do i continue to use the PDA button on odin for the JB flash like I was instructed for the other thing or do I use the phone button?
FWIW home button is not needed on the S4 to enter recovery or download mode. I love it Just hold down one of the volume buttons as its booting and voila
belisknerprime said:
Thank you for the help. One question though, Do i continue to use the PDA button on odin for the JB flash like I was instructed for the other thing or do I use the phone button?
Click to expand...
Click to collapse
Use the PDA button. I *believe* the phone button is only for flashing modem files.
belisknerprime said:
Thank you for the help. One question though, Do i continue to use the PDA button on odin for the JB flash like I was instructed for the other thing or do I use the phone button?
Click to expand...
Click to collapse
Yes. only use the PDA button
I'm trying to goto stock firmware MDL. Downloaded the right 1.7G file and the 3.07 version of odin.
Put the S4 in download mode,but I see auth fail once the ODIN process starts.
I'm reading this thread:
http://forum.xda-developers.com/showthread.php?t=2483380
Do I need to do the PIT step as well ? ( If yes, where do I find the stock pit files for the S4 US Tmobile?
I grabbed the SGH-M919-TMB-M919UVUAMDL-1366964131*.md5 to use in odin->pda section
My phone is still bricked. Pls help
didadi said:
I'm trying to goto stock firmware MDL. Downloaded the right 1.7G file and the 3.07 version of odin.
Put the S4 in download mode,but I see auth fail once the ODIN process starts.
I'm reading this thread:
http://forum.xda-developers.com/showthread.php?t=2483380
Do I need to do the PIT step as well ? ( If yes, where do I find the stock pit files for the S4 US Tmobile?
I grabbed the SGH-M919-TMB-M919UVUAMDL-1366964131*.md5 to use in odin->pda section
My phone is still bricked. Pls help
Click to expand...
Click to collapse
Make sure your cable is good and try different USB port on pc.
Also which firmware are you on?
☞ Sent from here☜???
I've used 2 cables already and different USB. . I think the pit file is what I may have to check agian,as this seems debugging ODIN failures. Can somebody post me S4, Tmo 16GB stock pit file?
I'm on MK2 firmware. I'm trying to go back to stock firmware/4.2.2.
The exact err I'm getting is:
---
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1).
---
What is the way out here? Have I totally bricked my phone? xda or elsewhere not showing a workable solution yet. (Still searching)
I have a samsung galaxy s3 (3 mobile UK).. that is rooted and CWM installed
it was working just fine when it suddenly stuck while running, i pulled out battery and reinserted.... then it started restarting at 3 mobile logo screen but after a while it started to restart just after showing samsung logo..... at first it was going to cwm recovery but now it dont .... i am running icecream sandwich ....
i tried to update it to jelly beans using odin 3.07 with firmware XXEMD2...but NAND failed .... chanding port, restarting computer tried with no success
STUCK .... help..>!!!!!!
aadil.m said:
I have a samsung galaxy s3 (3 mobile UK).. that is rooted and CWM installed
it was working just fine when it suddenly stuck while running, i pulled out battery and reinserted.... then it started restarting at 3 mobile logo screen but after a while it started to restart just after showing samsung logo..... at first it was going to cwm recovery but now it dont .... i am running icecream sandwich ....
i tried to update it to jelly beans using odin 3.07 with firmware XXEMD2...but NAND failed .... chanding port, restarting computer tried with no success
STUCK .... help..>!!!!!!
Click to expand...
Click to collapse
Can the phone still boot into Download mode?
yup
altrikdout21 said:
Can the phone still boot into Download mode?
Click to expand...
Click to collapse
yes.... thats the only thing that my fone goes to
aadil.m said:
yes.... thats the only thing that my fone goes to
Click to expand...
Click to collapse
Download the appropriate zip for your carrier from this link http://forum.xda-developers.com/showthread.php?t=1739426 and then flash with odin. Keep in mind the person that hosted these hosted them on a website with incredibly slow download times. It often cuts out on you too, so make sure at the end of the download the file size is right. You may have gotten a bad download earlier.
If I have helped, slap that thanks button
aeppacher said:
Download the appropriate zip for your carrier from this link http://forum.xda-developers.com/showthread.php?t=1739426 and then flash with odin. Keep in mind the person that hosted these hosted them on a website with incredibly slow download times. It often cuts out on you too, so make sure at the end of the download the file size is right. You may have gotten a bad download earlier.
If I have helped, slap that thanks button
Click to expand...
Click to collapse
but but the link you provided is to root my device ..... and it does not include 3 mobile company
not to flash :-s
Save the phone
aadil.m said:
but but the link you provided is to root my device ..... and it does not include 3 mobile company
not to flash :-s
Click to expand...
Click to collapse
Hi , please go to the sammobile site and choose your exact firm.
Download it and extract it,
Use odin to flash it.
aadil.m said:
but but the link you provided is to root my device ..... and it does not include 3 mobile company
not to flash :-s
Click to expand...
Click to collapse
sorry assumed you wanted root. Just go to sammobile and download a firmware http://www.sammobile.com/firmwares/1/ just put in your phone's info.
Slap that thanks button if I helped
aeppacher said:
sorry assumed you wanted root. Just go to sammobile and download a firmware
Slap that thanks button if I helped
Click to expand...
Click to collapse
it dint work
NAND failed in odin
thaanks for ur help
aadil.m said:
it dint work
NAND failed in odin
thaanks for ur help
Click to expand...
Click to collapse
I would recommend installing kies from samsung and trying to flash the firmware with them. That should fix it no matter what and make sure that you do have the right drivers installed. Also make sure you have the right version of odin running. Here is download link for kies on PC (I assume you have PC) http://downloadcenter.samsung.com/content/SW/201306/20130612104232657/KiesSetup.exe just install, plug your phone in and hopefully it recognizes it. Even if it doesn't, it might install some drivers that make odin work. Let me know if it fixes it
aeppacher said:
I would recommend installing kies from samsung and trying to flash the firmware with them. That should fix it no matter what and make sure that you do have the right drivers installed. Also make sure you have the right version of odin running. Here is download link for kies on PC (I assume you have PC) just install, plug your phone in and hopefully it recognizes it. Even if it doesn't, it might install some drivers that make odin work. Let me know if it fixes it
Click to expand...
Click to collapse
samsung kies dont detect the device... its says device not responding, reboot ur device
odine says same thing ... NAND failed....
went to software specialist shop locally.... even he cannot fix the device
whats wroooooooooooooooong!!!
should i go for re-partition my device with PIT file??
Hhhhheeeeeeeeeeeeeeellllllllllllllpppppppppppppppp!!!
tried to repatition with PIT but failed it says
"there is no pit partition"
aadil.m said:
samsung kies dont detect the device... its says device not responding, reboot ur device
odine says same thing ... NAND failed....
went to software specialist shop locally.... even he cannot fix the device
whats wroooooooooooooooong!!!
should i go for re-partition my device with PIT file??
Click to expand...
Click to collapse
similar issue, last post on first page might help http://forum.xda-developers.com/showthread.php?t=1846867
After running into some issues while upgrading to an official kitkat firmware I managed to boot up my phone but now it doesnt get recognized by kies even though its official. I also cant see which csc Im on since when I type in *#1234# it simply goes away from the screen as if its been wiped.
any clues? should i flash something else over?
kostas90 said:
After running into some issues while upgrading to an official kitkat firmware I managed to boot up my phone but now it doesnt get recognized by kies even though its official. I also cant see which csc Im on since when I type in *#1234# it simply goes away from the screen as if its been wiped.
any clues? should i flash something else over?
Click to expand...
Click to collapse
What did you use to upgrade? Kies? or Odin?
feckinfinch said:
What did you use to upgrade? Kies? or Odin?
Click to expand...
Click to collapse
Odin
kostas90 said:
Odin
Click to expand...
Click to collapse
Try flashing this in the attachments using odin the same wayy you did the stock firmware, just extract the rar file and use the .md5, and then do a full factory reset then it should recognize.
forget KIES ( completely useless) ! flash SamMobile's firmwares with ODIN !
feckinfinch said:
Try flashing this in the attachments using odin the same wayy you did the stock firmware, just extract the rar file and use the .md5, and then do a full factory reset then it should recognize.
Click to expand...
Click to collapse
Ill get around to it in a few days when my exams will be over. need to back everything up first and that will take a minute. thanks!!
guys please help as i was rooting my phone everything went fine then all of sudden bam froze so i took battery out to restart and was stuck on logo i can upload any specs u like
Just download the latest stock rom from sammobile.com and flash it via Odin.
audit13 said:
Just download the latest stock rom from sammobile.com and flash it via Odin.
Click to expand...
Click to collapse
THANKS for reply i downloaded all the firmware all failed...i even went into my wipe datat cache by holdin up on volume power key an home..key it said n71000 i donloaded that firmware to...all failed from that site...i can upload anything u likee plz help
What model is shown in download mode? If it says n7100, the phone is not from T-Mobile.
audit13 said:
What model is shown in download mode? If it says n7100, the phone is not from T-Mobile.
Click to expand...
Click to collapse
thaznks for repli after I rooted it it says at the top in red here i'll upload a video for you it says this n71000ccunfni1
It says n7100 in download mode?
KingHack12 said:
thaznks for repli after I rooted it it says at the top in red here i'll upload a video for you it says this n71000xxunfni1...but when I take battery from phone it says sgh-t889 at the top in red it says
android system recovery <3e>
kot49h.n7100xxufni1
and the rest is just a bunch of e:failed to mount/cache {no such file or directori)
e:cant mount /cahce/recorveri/last_recoveri
theres a lot more
Click to expand...
Click to collapse
let me check download mode 1 sec
download mode says sgh-t889 sorry my webcam actin ****ty
sorry download mode is fine its the recorvery mode
The model @ shown in download is the firmware you should be flashing, not the n7100.
Flash the latest ROM from here: http://www.sammobile.com/firmwares/database/SGH-T889/
audit13 said:
The model @ shown in download is the firmware you should be flashing, not the n7100.
Flash the latest ROM from here: http://www.sammobile.com/firmwares/database/SGH-T889/
Click to expand...
Click to collapse
hey thanks but I downloaded them all already all fails says operation failed to write...or something like that
What is the Odin error? Phone appears as a com device in Odin?Have you tried using different USB cables and USB ports?
audit13 said:
What is the Odin error? Phone appears as a com device in Odin?Have you tried using different USB cables and USB ports?
Click to expand...
Click to collapse
wahhhhh:crying::crying: I don't know the pit error is re partionin error and the stock flash is complete(write) operation failed....I used the same odin when I rooted my phone everything was fine....for 40 mins I downloaded gta sa then phone froze so I took battery out to restart and I was stuck on logo tried to reset my phone using the old fashion wipe/data factory reset.but nothing happens I never seen this screen befor the red 1
Your phone lols to have an n7100 recovery but it is a t889 in download mode.
lol so what the hell man it was that stupid one click root method or some **** that did it I could of factory reset just fine befor this...when I rooted I guess that chged my recorvery is ther sum way I can fix?
and thank for helpin m3
Just to confirm but you flashed t889 firmware in Odin?
nope never I just straight up rooted the phone...got stuck on the logo tried 1 flash 2 flash...got pissed of downloaded them all (sammobile) all failed all said same thing.....only thing that seems to do something is cwm4_fixed_forcm7-odin.tar
but never completes
So you never tried to flash t889 firmware from sammobile?
audit13 said:
So you never tried to flash t889 firmware from sammobile?
Click to expand...
Click to collapse
I might go to the store later or sometim3 next week but yes man..i downloaded all the firmwar on the page...al say complete write fail