Imie is intact,
wifi works,
modem seems to be failing to initilize,
baseband version i8160xxlk6
modem service status changes between radio off and out of service
network type is unknown,
attempting to turn on the modem from the menu causes a android.phone crash
Carbon ROM requires Jelly Bean (Android 4.1.x) baseband. Your (I8160XXLK6) is from Android 2.3.6
1. Wipe data
2. flash 3-parted Firmware http://forum.xda-developers.com/showpost.php?p=53921158&postcount=8
3. flash lastest Samsung stock ROM eg. I8160XXNB1
4. finally install Carbon.
Should work
Related
Hi
I had Intergalactic 3.0 ROM and decided to check back on the forums and found a update in the ROM wich upgraded Android v4.1.2 to 4.3, but I need a to upload the bootloader according to stratatak7 the ROM creator. He states that you need
Option A: MJ2 bootloader and MJB modem
Option B: Official MJB 4.3 bootloader and modem
Or you with loose data & wifi connection, I downloaded both files and I747MVLUEMK5 bootloader to update but i get the following error:
You cannot flash from your current bootloader
Current version: I747MUMBLL1
What can I do to update the bootloader or can I just update the modem to get wifi and data to work?
Baseband version is I747MUMLK3
Thanks!!
With my current Modem and bootloader and the new version of the ROM v4.1, I get phone calls, but no wifi or data, I tried different modems but all of them give me no reception, data or wifi.
I'm very confused with the bootloader thing, I don't see any updates for the one I have, Can I flash another one or I'm stuck with this?
The MJ2 and MJB are made for the i747, not the i747m.
Title says it all.. on baseband ND8 whenever I use a kitkat aosp rom and flash a kernel (ktoonz or lean kernel) I have no service and need to reflash the rom to regain service.
This is an issue because whenever I use a kitkat aosp rom without flashing a kernel the camera reboots my phone when I try to open it or use it through apps.
Whenever I flash a new kernel i can open and use the camera and it works perfectly but like I said it kills my service :-/ any ideas? Do i have to flash a different modem and if so which modem should I try
Hello experts,
I need an explanation for the following issue:
- M919 flashed via Odin with NK2 stock firmware
- flashed TWRP via heimdall
- flashed Mokee firmware via TWRP
- baseband is changed to M919UVUFNB4
Now I flashed my wife's M919 which is on M919UVUEMK2 with Mokee but the baseband stays at MK2. Why?
Do I need to flash her phone to NK2 and then flash Mokee to get the M919UVUFNB4 baseband?
Why would you want NB4 baseband?
You may have had mismatched baseband /bootloader on your phone to begin with.
You should always have the latest modem running NH7 or NK2, even if you downgrade bootloader.
Pp.
The point is why was the baseband downgraded when I flashed Mokee on my phone but not upgraded when I flashed Mokee on my wife's phone?
Mokee roms will not install modem or change firmware, these are not included in the rom.
Your baseband must have been at NB4 before you flashed mokee.
Its possible that when you flashed the stock firmware the modem didn't stick and stayed NB4.
Your wife's phone had the matching baseband /firmware already, so it stayed the same.
All you have to do is flash the nk2 modem on your phone using Odin and you'll be all set.
Pp.
@PanchoPlanet: Yes you are right. While flashing the stock ROM NK2 the modem didn't stick. I had to flash it 3 times on my phone and 2 times on my wife's phone. Now they are both on NK2 baseband. But unfortunately that didn't solve the low WiFi signal on my wife's phone...
If you can see a side by side comparison of both phones on the same wifi network and one has more signal than the other, you may be having a hardware issue with your wife's phone.
Hardware related could be the physical radio on m/b or the antenna wire.
Find a wifi analysis app in the play store and run it on both phones and check your readings.
If they match it could just be that the displayed value could be off.
Pp.
I Have a i9192 and I having a problem with baseband, I have been use CM12 and after an update I start to get "unknown baseband", I change to Pac-man and it stop, but I day using the problem start again, I change de modem and the problem stop but a day using and it start again, I flahs samsung firmware and the problem has solved, I try to use Ressurrection Remix and a day and half the same problem again, I come back to CM12 and it happens, so, just with custom roms I get that problem, and now I have it again using CM12, any tip of how to solve it don't flash every time a stock firmware?
My wifi signal is ok, no problem with that.
In the second picture, that error occurs if I try to enter in the Status
What version of stock firmware did u flash? Is it kitkat or jellybean.
Also what recovery do you use?
I recommend TWRP as it has an option to backup modem. So you can restore modem part of the backup when cm12 or any custom rom says
"unknown baseband"
sasank360 said:
What version of stock firmware did u flash? Is it kitkat or jellybean.
Also what recovery do you use?
I recommend TWRP as it has an option to backup modem. So you can restore modem part of the backup when cm12 or any custom rom says
"unknown baseband"
Click to expand...
Click to collapse
Build Date: 13.11.2013 -> Region: TTT (Trinidad and Tobago) PDA: I9192UBUBMK4 Changelist: 2125686 Android: 4.2.2
Build Date: 13.11.2013 -> Region: ZTO (Brazil) PDA: I9192UBUBMK4 Changelist: 2125686 Android: 4.2.2 ->
I downloaded that two there, but I have installed the first (TTT) and both are a KNOX free version posted by SilviuMik, I update it from samsung and after that I flashed Ressurrection Remix (5.0.2), I'm using CWM 6.0.5.0 and Philz Touch 6.
Exist the possibility of any app that I downloaded from appstore doing this?
flipeicl said:
Build Date: 13.11.2013 -> Region: TTT (Trinidad and Tobago) PDA: I9192UBUBMK4 Android: 4.2.2
Build Date: 13.11.2013 -> Region: ZTO (Brazil) PDA: I9192UBUBMK4 Android: 4.2.2 ->
Click to expand...
Click to collapse
You are on the old bootloader with jellybean system. Try to update to latest stock kitkat. If your phone has no warranty now then no need to fear knox.
Also @SilviuMik please help @flipeicl . I think there is a way to update to stock kitkat without bootloader. Try that.
sasank360 said:
You are on the old bootloader with jellybean system. Try to update to latest stock kitkat. If your phone has no warranty now then no need to fear knox.
Also @SilviuMik please help @flipeicl . I think there is a way to update to stock kitkat without bootloader. Try that.
Click to expand...
Click to collapse
I have installed the 4.2.2 but updated to 4.4.2 via "samsung update", today I tried one more time to clean the custom rom to install a stock firmware, I entered in the CWM, I did a factory reset, wipe cache and dalvik cache, but Odin don't recognize my phone via USB in donwload mode, so I tried to restart the phone and install the USB driver, so for my surprise, the phone get a CM12 instalation (I don't know how), and now everything is working with modem i9192UBUCOB1, I will do more tests in these days.
Hey, I have few questions and a request.
first of all is it possible to flash modem after flashing the rom(I currently have a working kitkat 4.4.2 TWN v10b- stock rom) but I don't have signal - that's because I have messed up things before that and installed a rom for hongkong d858 phone , now hardly I could flash back to my stock rom but i still have no signal .. so that's modem related i suppose .
If anyone could give me a link to where i can download kitkat modem for my phone and how do I flash it .. please
*** it is preferred if i can flash it without root ***
well i flashed the modem using twrp zip flash but still no signal any ideas?