Hello everyone,I got a Xperia M from a friend and it had Android 4.3 already.I unlocked bootloader and installed CM11 kernel using fastboot.I installed CM11 FXP345 with Wipe Data and Cache but when I tried to turn on the phone it stucked at CM11 logo.Any help plz??
AlienTechGR said:
Hello everyone,I got a Xperia M from a friend and it had Android 4.3 already.I unlocked bootloader and installed CM11 kernel using fastboot.I installed CM11 FXP345 with Wipe Data and Cache but when I tried to turn on the phone it stucked at CM11 logo.Any help plz??
Click to expand...
Click to collapse
have your phone boot up succesfully after unlock bootloader? if not i suggest you to re-flash your phone to stock rom with flashtool after and do full wipe data and you must know if your phone if boot up succesfully if success now you can install cm11 kernel again using a fastboot and that you install again cm11 with wipe data, and that's all just wait it for 5 until 7 minutes for first boot it's take a while, tell me if still have a problem ok
Nicklas Van Dam said:
have your phone boot up succesfully after unlock bootloader? if not i suggest you to re-flash your phone to stock rom with flashtool after and do full wipe data and you must know if your phone if boot up succesfully if success now you can install cm11 kernel again using a fastboot and that you install again cm11 with wipe data, and that's all just wait it for 5 until 7 minutes for first boot it's take a while, tell me if still have a problem ok
Click to expand...
Click to collapse
Thanks for your reply first of all Of course I have unlocked bootloader and the AOKP/AOSP ROM 4.4 works perfectly.Only CM doesn't work!
Related
I have a big problem. I had installed 4.04 latest ICS. The I rooted the phone and installed cwm via x-parts from google play. Then I booted to cwm recowery from x-parts. Then I wiped all data and formated System!! I flashed new rom whic was only update not whole rom. I rebooted the phone and now I cannot get into cwm recovery and there is no system! What can I do???
Thank you!
Reflash the stock ROM, and don't wipe data if you install CWM through X Parts.
Sent from myushi
Problem like this
XperienceD said:
Reflash the stock ROM, and don't wipe data if you install CWM through X Parts.
Sent from myushi
Click to expand...
Click to collapse
Hello there, I got the same problem, I have rooted it, and installed remix ice and jelly bean v3. After rebooting it stocked on Sony logo, now I can do anything more, It turn on it selfs, I cant shut down. The pc doesnt recognize it so cant flash other one which works...
Is there any other solution please help
As above, I can only assume that the ROM you installed didn't come pre installed with cwm.
Plenty out there that do....jj's hybrid is nice.
humercab said:
I have a big problem. I had installed 4.04 latest ICS. The I rooted the phone and installed cwm via x-parts from google play. Then I booted to cwm recowery from x-parts. Then I wiped all data and formated System!! I flashed new rom whic was only update not whole rom. I rebooted the phone and now I cannot get into cwm recovery and there is no system! What can I do???
Thank you!
Click to expand...
Click to collapse
Use SEUS to flash stock firmware if you did not unlock bootloader, or flash stock firmware .ftf file with flashtool.
僕のLT18iから送られてきた
Hello,
Today i rooted my Galaxy grand with CWM using Odin and intalled SuperSu through recovery mode. Then i entered recovery mode again to install Xperia Z rom for Galaxy Grand , which i had placed in my external sd card. When i installed it using all the steps(Wipe data,cache etc etc) and reeboted my device, it got stuck on the boot screen with Samsung Galaxy grand logo running in loop for several time. Atlast i removed my battery and using the download mode again installed the 4.2.2 update with Odin.
Can u please tell me what went wrong while installing the rom.
nish1991 said:
Hello,
Today i rooted my Galaxy grand with CWM using Odin and intalled SuperSu through recovery mode. Then i entered recovery mode again to install Xperia Z rom for Galaxy Grand , which i had placed in my external sd card. When i installed it using all the steps(Wipe data,cache etc etc) and reeboted my device, it got stuck on the boot screen with Samsung Galaxy grand logo running in loop for several time. Atlast i removed my battery and using the download mode again installed the 4.2.2 update with Odin.
Can u please tell me what went wrong while installing the rom.
Click to expand...
Click to collapse
Maybe your source file is corrupted? In CWM, after installing the ROM, does it appears installation success or update success any similar message?
And suggest you wipe data & cache after installing the ROM, not before. Wipe Dalvik cache too.
soralz said:
Maybe your source file is corrupted? In CWM, after installing the ROM, does it appears installation success or update success any similar message?
And suggest you wipe data & cache after installing the ROM, not before. Wipe Dalvik cache too.
Click to expand...
Click to collapse
Source file? Are you speaking about the rom file I downloaded ?
Yes after installing the rom there is message Updated Successfully in CWM.
But i wiped the data and cache before installing the rom and dalvik cache after installing the rom..
Please help....can you give me detailed steps for installing rom.
If you are coming from stock rom after it shows installation complete again wipe all DATA frm cwm and reboot
Sent from my GT-I9505 using Tapatalk 2
Sulaimanshariff said:
If you are coming from stock rom after it shows installation complete again wipe all DATA frm cwm and reboot
Sent from my GT-I9505 using Tapatalk 2
Click to expand...
Click to collapse
Hey no worries...
I just installed another Xperia Z rom...and everything is grt nw....
Same Problem it is stucked now on that sceen and I too got the massage that it is install successfully... I cant install any other ROM as I want to use dual sim and most of the ROM are not compatible with dual SIM.... PLEASE HELP
soralz said:
Maybe your source file is corrupted? In CWM, after installing the ROM, does it appears installation success or update success any similar message?
And suggest you wipe data & cache after installing the ROM, not before. Wipe Dalvik cache too.
Click to expand...
Click to collapse
nish1991 said:
Hello,
Today i rooted my Galaxy grand with CWM using Odin and intalled SuperSu through recovery mode. Then i entered recovery mode again to install Xperia Z rom for Galaxy Grand , which i had placed in my external sd card. When i installed it using all the steps(Wipe data,cache etc etc) and reeboted my device, it got stuck on the boot screen with Samsung Galaxy grand logo running in loop for several time. Atlast i removed my battery and using the download mode again installed the 4.2.2 update with Odin.
Can u please tell me what went wrong while installing the rom.
Click to expand...
Click to collapse
"Atlast i removed my battery and using the download mode again installed the 4.2.2 update with Odin."
can you tell me how you did?? i am a newbie
stuck in boot loop
soralz said:
Maybe your source file is corrupted? In CWM, after installing the ROM, does it appears installation success or update success any similar message?
And suggest you wipe data & cache after installing the ROM, not before. Wipe Dalvik cache too.
Click to expand...
Click to collapse
yes everything went right but after i click reboot than i try to start samsung galaxy grand i9082 logo appears there it blink 4 5 times then i remove my battery and try to start again but now it is not even opening not cwm recovery menu and not going to the odin download mod also
ODIN mode is also not opening without usb cavle mean opening when plugged into charging.
please help me ,-_-,
, ,
Xperia Z Rom GT-I9082
Which CWM i recovery i use please tell me
i'm using CWM 6.0.2 recovery but when try to install i stuck in installing screen and then automatically back in recovery mode.
MD5 not found
yogeshp007 said:
Which CWM i recovery i use please tell me
i'm using CWM 6.0.2 recovery but when try to install i stuck in installing screen and then automatically back in recovery mode.
MD5 not found
Click to expand...
Click to collapse
Ik think that the CWM version is to old.
Also if you want to go to lollipop later then you can't do this with CWM 6.0.2.
Download a new CWM with an minimum version 6.4.5 or TWRP 2.8.6.0.
Never tried to install the older version roms with TWRP but with CWM I was able to install all.
Installing Rom
Sir i want to install xperia z rom please help me!!
tell me in details please
i wanted to install @niaboc79 's existenz ultra rom v2.. so..
i went according to the process as it was said
i did flash my phone with sony's latest firmware .2.67
i have a locked bootloader.
rooted and installed cwm.
then i put the v2 of existenz ultra rom in my internal storage..
wiped data, cache and dalvik cache..
installed the rom.
then when i pressed the reboot system now.. it said that rom may flash stock recovery on boot fix?
first i tried with yes, but it got stuck at the sony logo and would not go further.
again i did the same procedure and this time i tried no. but still it is getting stuck at the same place..
plz help... how to i get this rom running...
flash latest ftf for ZL, root then install CWM, now download existenz rom "v2" put it on your sd card, go to recovery flash the rom... you don't need wipe because you had installed ftf and it delete all (make sure no field is checked while flashing with flashtool)
i used that rom without problem... CM 10.2 now
ok so now i am on v1 of the rom cause of many tries i made it woukd still get stuck at the sony logo.
v1 installed without any problems..but don't know why the v2 is not..
any suggestion on how do i upgrade now without going into the bootloop again..:fingers-crossed:
jeet.dedhia said:
ok so now i am on v1 of the rom cause of many tries i made it woukd still get stuck at the sony logo.
v1 installed without any problems..but don't know why the v2 is not..
any suggestion on how do i upgrade now without going into the bootloop again..:fingers-crossed:
Click to expand...
Click to collapse
MP me and I will help you with/through the process
Hi guys. Recently my Canvas A1 (Android One) got stuck in bootloop. In order to fix it, I flashed it with the stock ROM provided after unlocking bootloader.
However, even after doing that, on reboot bootloop came back. It got stuck on the animation screen after the Micromax logo and restarted again, and this goes on and on.
So, I flashed it with Wormhole ROM after that. But still, it got stuck at splash screen.
I have tried all this along with wiping dalvik cache, system cache etc.
I have CWM installed on the phone.
I tried to flash it once more with stock ROM but it still got stuck as before. Please help! What should I do?
why you flashed it? you should have claim the warranty.
skd1993 said:
Hi guys. Recently my Canvas A1 (Android One) got stuck in bootloop. In order to fix it, I flashed it with the stock ROM provided after unlocking bootloader.
However, even after doing that, on reboot bootloop came back. It got stuck on the animation screen after the Micromax logo and restarted again, and this goes on and on.
So, I flashed it with Wormhole ROM after that. But still, it got stuck at splash screen.
I have tried all this along with wiping dalvik cache, system cache etc.
I have CWM installed on the phone.
I tried to flash it once more with stock ROM but it still got stuck as before. Please help! What should I do?
Click to expand...
Click to collapse
Remove battery, sims and mmc
Wait atleast 1-2 minutes
Put all back
Now go to recovery and wipe all
Install your stable rom zip
Reboot.
It seems that your phone is bricked. I think that you are under warranty and you should go to service centre. You can also flash a custom ROM
skd1993 said:
Hi guys. Recently my Canvas A1 (Android One) got stuck in bootloop. In order to fix it, I flashed it with the stock ROM provided after unlocking bootloader.
However, even after doing that, on reboot bootloop came back. It got stuck on the animation screen after the Micromax logo and restarted again, and this goes on and on.
So, I flashed it with Wormhole ROM after that. But still, it got stuck at splash screen.
I have tried all this along with wiping dalvik cache, system cache etc.
I have CWM installed on the phone.
I tried to flash it once more with stock ROM but it still got stuck as before. Please help! What should I do?
Click to expand...
Click to collapse
Sir, before flashing any ROM wipe all data and dalvik cache
Try this this may help you:thumbup:
how bro
Mohitash said:
Remove battery, sims and mmc
Wait atleast 1-2 minutes
Put all back
Now go to recovery and wipe all
Install your stable rom zip
Reboot.
Click to expand...
Click to collapse
flash your phone with sp flash tool work well
Sushant Rohan said:
Sir, before flashing any ROM wipe all data and dalvik cache
Try this this may help you:thumbup:
Click to expand...
Click to collapse
my android one (micromax) stuck on boot animations .i cant go to boot selections......what to do ..os is marshmallow
android one stuck in boot loop.
hi,
my android one had received OTA update on 1 may. after that once due to low batt it got switched off automatically and since then it is not booting up. i tried charging it full and also tried to flash it using sp tools. but nothing happens once i click the download button. the mobile dosent detect with its battery removed also. i even tried factory reset but it didn't work.
pl help.
I have flashed custom Rom But
skd1993 said:
Hi guys. Recently my Canvas A1 (Android One) got stuck in bootloop. In order to fix it, I flashed it with the stock ROM provided after unlocking bootloader.
However, even after doing that, on reboot bootloop came back. It got stuck on the animation screen after the Micromax logo and restarted again, and this goes on and on.
So, I flashed it with Wormhole ROM after that. But still, it got stuck at splash screen.
I have tried all this along with wiping dalvik cache, system cache etc.
I have CWM installed on the phone.
I tried to flash it once more with stock ROM but it still got stuck as before. Please help! What should I do?
Click to expand...
Click to collapse
I have flashed official 6.0 after bootloop but no service(emergency call) after that.
I have also tried to install CM13 but the problem is still there
my phones warranty is over now.
please help me .
Sushant Rohan said:
Sir, before flashing any ROM wipe all data and dalvik cache
Try this this may help you:thumbup:
Click to expand...
Click to collapse
My Karbonn Android One also got stuck in the bootloop.
Tried:
1) Wipe data/factory reset
2) Wipe cache partition
3) Mount/System
No improvements. Any suggestions please!!!!
Same here.. [Solved]
skd1993 said:
Hi guys. Recently my Canvas A1 (Android One) got stuck in bootloop. In order to fix it, I flashed it with the stock ROM provided after unlocking bootloader.
However, even after doing that, on reboot bootloop came back. It got stuck on the animation screen after the Micromax logo and restarted again, and this goes on and on.
So, I flashed it with Wormhole ROM after that. But still, it got stuck at splash screen.
I have tried all this along with wiping dalvik cache, system cache etc.
I have CWM installed on the phone.
I tried to flash it once more with stock ROM but it still got stuck as before. Please help! What should I do?
Click to expand...
Click to collapse
Hey,
Try this... Worked for my canvas a1...
1. Install Minimal ADB and fastboot (search google)..
2. Download universal sprout 4(or 8) stock rom from xda..
3. Use philz touch recovery and wipe cache in your mobile through recovery....
4. Now install your stock rom from .zip file..
5. That's it.... Reboot and your phone is back..!
Regards,
Aashif
Ashabilash said:
My Karbonn Android One also got stuck in the bootloop.
Tried:
1) Wipe data/factory reset
2) Wipe cache partition
3) Mount/System
No improvements. Any suggestions please!!!!
Click to expand...
Click to collapse
Just flash stock rom with pc or laptop and if you have custom recovery flash stable rom it will be fixed
how!?
Can someone tell me how m I going to install TWRP even my device stuck on bootloop and can't pass on it. I try the recovery method like factory data clear participation but doesn't even work. My device is firefly mobile plss tell me
markphaul13 said:
Can someone tell me how m I going to install TWRP even my device stuck on bootloop and can't pass on it. I try the recovery method like factory data clear participation but doesn't even work. My device is firefly mobile plss tell me
Click to expand...
Click to collapse
Turn off device completely, wait for 100 seconds and connect the turned off phone to the PC. Hold the Power and Volume Up button together. You will see a menu.
1) Select fastboot mode using volume buttons.
2)On your PC download adb and extract it anywhere and navigate there.
3)open command prompt in that directory and type fastboot devices.
4)you will see serial no. Of your phone if not try reconnecting phone and letting the drivers install.
5)Using Android one toolkit Flash TWRP.
6)Flash whatever new system you want and tadaa......
Hi Mates,
I was unlocking the bootloader of my Xperia M Dual. It went well but after that the phone went into bootloop. I read quite a few threads which suggest to flash stock rom. But I am having a few problems :
1. Cant find Indian stock rom, some links dont have the file others have a brazilian version. Please give a link.
2. Will flashing stock rom would work as I havent installed any backup CWM or TWRP ?
3, Can I flash cynogen nightly directly instead of flashing stock rom ?
4. Other things I should know prior flashing being a newbie.
5. BTW how much time does it takes to boot after unlocking bootloader ?
Ckp1991 said:
Hi Mates,
I was unlocking the bootloader of my Xperia M Dual. It went well but after that the phone went into bootloop. I read quite a few threads which suggest to flash stock rom. But I am having a few problems :
1. Cant find Indian stock rom, some links dont have the file others have a brazilian version. Please give a link.
2. Will flashing stock rom would work as I havent installed any backup CWM or TWRP ?
3, Can I flash cynogen nightly directly instead of flashing stock rom ?
4. Other things I should know prior flashing being a newbie.
5. BTW how much time does it takes to boot after unlocking bootloader ?
Click to expand...
Click to collapse
A1. This thread helped me. - http://forum.xda-developers.com/showthread.php?t=2532190.
A2. Yes, flashing stock rom would work even if you haven't installed any backup using CWM or TWRP.
A3. You can still flash CyanogenMod Nightlies directly instead of flashing the stock rom and then flashing CM again.
A4. Newbie here too! so I can't actually Suggest you anything
A5. It is supposed to take 5-10 minutes but even my phone went into bootloop.
What I did :-
> Flashed the old TWRP recovery from flashtool
> Installed CM and GApps
> Wiped Data/Factory Reset
> Rebooted the Device.
And VIOLA! the phone works like a charm!
I've been using the ROM for 2-3 days now and I have no major problems as of yet.
Hope this works out in your favour!
Happy Flashing!
After unlocking bootloader Bootloop is normal. You have to flash stock rom to fix it and also you can also flash any custom recovery(Cwm,Twrp) then flash any custom rom to fix it.
4.3 Indian Stock Rom
Recovery - CWM Philz
I am getting application error on flashtool help