Hi guys. Recently my Canvas A1 (Android One) got stuck in bootloop. In order to fix it, I flashed it with the stock ROM provided after unlocking bootloader.
However, even after doing that, on reboot bootloop came back. It got stuck on the animation screen after the Micromax logo and restarted again, and this goes on and on.
So, I flashed it with Wormhole ROM after that. But still, it got stuck at splash screen.
I have tried all this along with wiping dalvik cache, system cache etc.
I have CWM installed on the phone.
I tried to flash it once more with stock ROM but it still got stuck as before. Please help! What should I do?
why you flashed it? you should have claim the warranty.
skd1993 said:
Hi guys. Recently my Canvas A1 (Android One) got stuck in bootloop. In order to fix it, I flashed it with the stock ROM provided after unlocking bootloader.
However, even after doing that, on reboot bootloop came back. It got stuck on the animation screen after the Micromax logo and restarted again, and this goes on and on.
So, I flashed it with Wormhole ROM after that. But still, it got stuck at splash screen.
I have tried all this along with wiping dalvik cache, system cache etc.
I have CWM installed on the phone.
I tried to flash it once more with stock ROM but it still got stuck as before. Please help! What should I do?
Click to expand...
Click to collapse
Remove battery, sims and mmc
Wait atleast 1-2 minutes
Put all back
Now go to recovery and wipe all
Install your stable rom zip
Reboot.
It seems that your phone is bricked. I think that you are under warranty and you should go to service centre. You can also flash a custom ROM
skd1993 said:
Hi guys. Recently my Canvas A1 (Android One) got stuck in bootloop. In order to fix it, I flashed it with the stock ROM provided after unlocking bootloader.
However, even after doing that, on reboot bootloop came back. It got stuck on the animation screen after the Micromax logo and restarted again, and this goes on and on.
So, I flashed it with Wormhole ROM after that. But still, it got stuck at splash screen.
I have tried all this along with wiping dalvik cache, system cache etc.
I have CWM installed on the phone.
I tried to flash it once more with stock ROM but it still got stuck as before. Please help! What should I do?
Click to expand...
Click to collapse
Sir, before flashing any ROM wipe all data and dalvik cache
Try this this may help you:thumbup:
how bro
Mohitash said:
Remove battery, sims and mmc
Wait atleast 1-2 minutes
Put all back
Now go to recovery and wipe all
Install your stable rom zip
Reboot.
Click to expand...
Click to collapse
flash your phone with sp flash tool work well
Sushant Rohan said:
Sir, before flashing any ROM wipe all data and dalvik cache
Try this this may help you:thumbup:
Click to expand...
Click to collapse
my android one (micromax) stuck on boot animations .i cant go to boot selections......what to do ..os is marshmallow
android one stuck in boot loop.
hi,
my android one had received OTA update on 1 may. after that once due to low batt it got switched off automatically and since then it is not booting up. i tried charging it full and also tried to flash it using sp tools. but nothing happens once i click the download button. the mobile dosent detect with its battery removed also. i even tried factory reset but it didn't work.
pl help.
I have flashed custom Rom But
skd1993 said:
Hi guys. Recently my Canvas A1 (Android One) got stuck in bootloop. In order to fix it, I flashed it with the stock ROM provided after unlocking bootloader.
However, even after doing that, on reboot bootloop came back. It got stuck on the animation screen after the Micromax logo and restarted again, and this goes on and on.
So, I flashed it with Wormhole ROM after that. But still, it got stuck at splash screen.
I have tried all this along with wiping dalvik cache, system cache etc.
I have CWM installed on the phone.
I tried to flash it once more with stock ROM but it still got stuck as before. Please help! What should I do?
Click to expand...
Click to collapse
I have flashed official 6.0 after bootloop but no service(emergency call) after that.
I have also tried to install CM13 but the problem is still there
my phones warranty is over now.
please help me .
Sushant Rohan said:
Sir, before flashing any ROM wipe all data and dalvik cache
Try this this may help you:thumbup:
Click to expand...
Click to collapse
My Karbonn Android One also got stuck in the bootloop.
Tried:
1) Wipe data/factory reset
2) Wipe cache partition
3) Mount/System
No improvements. Any suggestions please!!!!
Same here.. [Solved]
skd1993 said:
Hi guys. Recently my Canvas A1 (Android One) got stuck in bootloop. In order to fix it, I flashed it with the stock ROM provided after unlocking bootloader.
However, even after doing that, on reboot bootloop came back. It got stuck on the animation screen after the Micromax logo and restarted again, and this goes on and on.
So, I flashed it with Wormhole ROM after that. But still, it got stuck at splash screen.
I have tried all this along with wiping dalvik cache, system cache etc.
I have CWM installed on the phone.
I tried to flash it once more with stock ROM but it still got stuck as before. Please help! What should I do?
Click to expand...
Click to collapse
Hey,
Try this... Worked for my canvas a1...
1. Install Minimal ADB and fastboot (search google)..
2. Download universal sprout 4(or 8) stock rom from xda..
3. Use philz touch recovery and wipe cache in your mobile through recovery....
4. Now install your stock rom from .zip file..
5. That's it.... Reboot and your phone is back..!
Regards,
Aashif
Ashabilash said:
My Karbonn Android One also got stuck in the bootloop.
Tried:
1) Wipe data/factory reset
2) Wipe cache partition
3) Mount/System
No improvements. Any suggestions please!!!!
Click to expand...
Click to collapse
Just flash stock rom with pc or laptop and if you have custom recovery flash stable rom it will be fixed
how!?
Can someone tell me how m I going to install TWRP even my device stuck on bootloop and can't pass on it. I try the recovery method like factory data clear participation but doesn't even work. My device is firefly mobile plss tell me
markphaul13 said:
Can someone tell me how m I going to install TWRP even my device stuck on bootloop and can't pass on it. I try the recovery method like factory data clear participation but doesn't even work. My device is firefly mobile plss tell me
Click to expand...
Click to collapse
Turn off device completely, wait for 100 seconds and connect the turned off phone to the PC. Hold the Power and Volume Up button together. You will see a menu.
1) Select fastboot mode using volume buttons.
2)On your PC download adb and extract it anywhere and navigate there.
3)open command prompt in that directory and type fastboot devices.
4)you will see serial no. Of your phone if not try reconnecting phone and letting the drivers install.
5)Using Android one toolkit Flash TWRP.
6)Flash whatever new system you want and tadaa......
Related
hi,
for the past hours i'm trying to flash skynote 9.3 after long time on some other 4.1.2 rom and i am having troubles after the flash, i wipe system, cache, dalvik, etc but after i select reboot now i get a prompt about root is missing with a No option and a yes (Install root) , the phone goes to samsung logo and then after a second reboot goes back to recovery! I have tryed twrp 2.8, cmw6.0.4.3 and phliz
i search througt the forums and the closest thing i came up is with this post
i have tried a stock firmware from odin first in case it was the bootloader...
any thoughts?
Hmm i dont know why but i have same problem on my Alcatel 4034x, until i bricked recovery and it booted into system without problem except now it looks like rom is poorly made, it automatically filled up dalvik and cache partitions and now i cant boot into recovery, fastboot or system. Its just stuck on alcatel logo. I also tried to flash it with sp flash tool, didnt work cuz drivers arent "signed" for some reason. Someone help me too pls
Guys please help
my phone n7505 and i had rooted it
first i flashed TWRP and did factory reset and data wipe cache and dalvic cache and system
and tried to flash the ROM but it stuck at boot logo
and then tried PhilZ Touch CWM V6 and i did the same hard reset and flashed the ROM again but still the same
Stuck at boot logo
i tried several time guys
and i forgot to do Backup
I'm Fu**ed up
HeELP PLEASE :crying:
SAW MJ said:
Guys please help
my phone n7505 and i had rooted it
first i flashed TWRP and did factory reset and data wipe cache and dalvic cache and system
and tried to flash the ROM but it stuck at boot logo
and then tried PhilZ Touch CWM V6 and i did the same hard reset and flashed the ROM again but still the same
Stuck at boot logo
i tried several time guys
and i forgot to do Backup
I'm Fu**ed up
HeELP PLEASE :crying:
Click to expand...
Click to collapse
For The Note 4 Mini S6 V6 TWRP is necessary don't use Philz Touch
Have you tried to remove the battery and restart after the clean install?
I think you should start with a clean base by reflashing a Rom Stock by Odin look on sammobile.com
REroot
Reflash recovery TWRP
And reflash this V6
Perhaps THe V6 Works but I recomend V5 for the moment and waiting for the next version
I wonder..
SAW MJ said:
Guys please help
my phone n7505 and i had rooted it
first i flashed TWRP and did factory reset and data wipe cache and dalvic cache and system
and tried to flash the ROM but it stuck at boot logo
and then tried PhilZ Touch CWM V6 and i did the same hard reset and flashed the ROM again but still the same
Stuck at boot logo
i tried several time guys
and i forgot to do Backup
I'm Fu**ed up
HeELP PLEASE :crying:
Click to expand...
Click to collapse
K! by far, you also formatted and used Philz!
Now i suggest you flash Stock rom(hence stock recovery will also be added).
Then if bootloop occurs, remove battery, insert and go to stock recovery and clean cache partition and factory reset
switch on, then go to odin mode and flash philz and then Format/do clean wipe,flash Note4mini and then factory reset(format)/'do clean wipe' .
Clean steps,i hope they help!
Hit Thanks if i helped,and spread Cheers
G'day guys,
I tried to install the CM 11 Rom on my phone (HTC One X 2012 international model), i unlocked the bootloader on the Htcdev site, rooted the phone successfully,
then i rebooted in recovery using ClockworkMod Recovery v5.8.4.0, made a back-up rom then wipe data/factory reset and installed CM 11 rom (cm-11-20140804-SNAPSHOT-M9-endeavoru.zip) and
it came up with Status 7 error and install aborted.....and now it's stuck in a boot loop, when i reboot it boots back into the Clockwork Mod recovery
I tried turning it off and restarting, i've ran the battery down but it still reboots in cwm recovery...
Is there anyway to fix this or have i stuffed my phone?
Any help would be greatly appreciated.....
Troy67 said:
G'day guys,
I tried to install the CM 11 Rom on my phone (HTC One X 2012 international model), i unlocked the bootloader on the Htcdev site, rooted the phone successfully,
then i rebooted in recovery using ClockworkMod Recovery v5.8.4.0, made a back-up rom then wipe data/factory reset and installed CM 11 rom (cm-11-20140804-SNAPSHOT-M9-endeavoru.zip) and
it came up with Status 7 error and install aborted.....and now it's stuck in a boot loop, when i reboot it boots back into the Clockwork Mod recovery
I tried turning it off and restarting, i've ran the battery down but it still reboots in cwm recovery...
Is there anyway to fix this or have i stuffed my phone?
Any help would be greatly appreciated.....
Click to expand...
Click to collapse
Too old recovery you must to use TWRP6.0.1 or higer to be able to install CM11 becouse is KitKat based rom read the OP in CM11 thread and download correct TWRP or CWM. Try with this CWM6.0.4.8
Thanks, I downloaded the CWM 6.0.4.8 like you said, now i have to try and get it out of the boot loop, I've tried about 6 different sites and their methods to fix it but none of them have worked, its still stuck in recovery mode.
My phone doesnt even register when i plug it into my pc either.
Is there any advice you can give to help with this?
Troy67 said:
Thanks, I downloaded the CWM 6.0.4.8 like you said, now i have to try and get it out of the boot loop, I've tried about 6 different sites and their methods to fix it but none of them have worked, its still stuck in recovery mode.
My phone doesnt even register when i plug it into my pc either.
Is there any advice you can give to help with this?
Click to expand...
Click to collapse
are you flashed boot.img via fastboot?
Thant said:
are you flashed boot.img via fastboot?
Click to expand...
Click to collapse
In the instructions it said to install the ROM and then flash the boot.img.
I didnt get past installing the rom before it bootlooped.
Troy67 said:
In the instructions it said to install the ROM and then flash the boot.img.
I didnt get past installing the rom before it bootlooped.
Click to expand...
Click to collapse
go in fastboot and flash the boot.img. Then try to install the rom again
Thant said:
go in fastboot and flash the boot.img. Then try to install the rom again
Click to expand...
Click to collapse
Tried to flash boot.img, pressed enter and it stayed on "waiting on device".
Got into bootloader on phone and even tried a factory reset and got nowhere.
Everytime i selected an option in bootloader ie. fastboot, recovery, it just reboots into recovery.
Troy67 said:
Tried to flash boot.img, pressed enter and it stayed on "waiting on device".
Got into bootloader on phone and even tried a factory reset and got nowhere.
Everytime i selected an option in bootloader ie. fastboot, recovery, it just reboots into recovery.
Click to expand...
Click to collapse
go in bootloader then select fastboot then connect the phone to computer and flash the boot.img if you don't see your device install the correct drivers for that
Thant said:
go in bootloader then select fastboot then connect the phone to computer and flash the boot.img if you don't see your device install the correct drivers for that
Click to expand...
Click to collapse
I dont know how many times i've tried to do a system restore in cwm recovery this week and failed each time, but tonight i tried and after the 3rd attempt it worked.
My phone is back to normal again.
Will be using the wiki instructions when i try again.
Thanks for your help
Hi guys,
I was running DarkWolf rom and I decided to go back to my factory stock rom (N900TUVUFOL1_N900TTMBFOL1_N900TUVUFOL1_HOME.tar.md5). Did that with Odin and it passed successfully. Now it started to reboot, but is stuck on the white screen that says T-Mobile. I reflashed the stock rom again using Odin and it passed again but upon reboot I am stuck at the same place. Am I freaking out because the first boot up is suppose to be longer than 40 minutes or is there a problem? Can someone please help me out.
daCADman said:
Hi guys,
I was running DarkWolf rom and I decided to go back to my factory stock rom (N900TUVUFOL1_N900TTMBFOL1_N900TUVUFOL1_HOME.tar.md5). Did that with Odin and it passed successfully. Now it started to reboot, but is stuck on the white screen that says T-Mobile. I reflashed the stock rom again using Odin and it passed again but upon reboot I am stuck at the same place. Am I freaking out because the first boot up is suppose to be longer than 40 minutes or is there a problem? Can someone please help me out.
Click to expand...
Click to collapse
That tends to happen some when flashing a stock ROM for some reason. If the initial boot hangs after flashing stock with Odin, most of the time you can fix the issue by booting to recovery and performing a Wipe data/Factory reset and Wipe cache partition.
wow i just coming from there I forget for like 10 minutes me factory reset lol just boot into recovery and make factory reset, thats the first thing we must do factory reset, my cell is working fine + root and custom recovery ( TWRP) and still working perfectly fine, however I can send tar for u just in case
Edit: solution added
problem:
after flashing a rom (in my case OP3lite or FreedomOS) you can't get past the boot logo
you have access to TWRP, so you can restore nandroid or flash flashable stock OxygenOS packages (tutorial here)
solution:
wipe: Dalvik /ART Cache, Cache, Data, System
flash your rom
try to boot (most likely will get stuck at boot logo)
boot into TWRP > Advanced > Fix Contexts, and swipe to Fix Contexts
Reboot
(wait a while, it might take a few minutes till it boots)
___________________________________________
original post:
hi,
I'm running official OxygenOS 3.1.3.
Rooted (systemless) , TWRP installed.
I don't have any problems on my rom, but everytime I flash a rom I get stuck at the boot logo.
I can just force reboot, goto twrp and restore my nandroid backup, and my phone works fine again.
But I can't flash any rom.
tried this:
Dirty flash OP3Lite rom - stuck at boot logo
wipe and install OP3Lite rom - stuck at boot logo
Restored nandroid backup, factory format, wipe and install OP3Lite rom - stuck at boot logo
wipe and install FreedomOS - stuck at boot logo
Restored nandroid backup, factory format, wipe and install FreedomOS - stuck at boot logo
wipe, Format userdata throught fastboot, install FreedomOS - stuck at boot logo
update to OxygenOS 3.2.1 (flashable zip throught twrp)
wipe and install FreedomOS - stuck at boot logo
Both roms I tried are OxygenOS 3.2.1 stock based, my problem is most likely not due to the rom I want to flash.
Anyone knows a solution for this?
is it possible that systemless root causes this problem?
are you encrypted? that might be the issue.
backup your internal sd data then go to fastboot and fastboot format userdata then flash the rom you want
Abaddon said:
are you encrypted? that might be the issue.
backup your internal sd data then go to fastboot and fastboot format userdata then flash the rom you want
Click to expand...
Click to collapse
I never did format my userdata throught fastboot, so I might be encrypted.
I'll try tomorrow and let you know if that was the solution.
@Abaddon I format my userdata throught fastboot (fastboot format userdata), but still roms wont go past the Logo . any other idea?
did you full wipe?
wiped /system too before flashing a rom then u go and flash the rom + gapps if needed
how long was it at the boot logo? no animation correct?
did u advance wipe - data, caches, system instead of factory wipe, try it 3 times
I did a few wipe 3 times, still stuck at logo.
I get stuck on this logo, never reboot, just get stuck there.
I noticed that it does flash the rom, cause if I restore my nanodroid backup layers and adblock is added.
I also get zero error while flashing in twrp.
I fixed it .
did a fill whipe, then flashed feedomOS, then tried to boot, didnt get past the logo, booted into recovery, selected "fix Contexts" and then rebooted, started without any problem .
doesent work for me..!! any help
Same here this issue keeps occuring again and again. then i always have to follow mega unbrick guide
Resurrection ROM 7.1.1 stuck at logo after every restore
nikhilsnigam said:
Same here this issue keeps occuring again and again. then i always have to follow mega unbrick guide
Click to expand...
Click to collapse
Faced this issue every time I restore any nandroid on one plus 3. It stucks at rotating resurrection logot . Even tried fix contents from TWRP, no output. Please help without a functional TWRP backup and restore - phone is useless. Only everytime mega unbrick guide needs to be repeated with painful reinstall of apps
hello guys. sorry if I'm a bit slow on this topic. I'm using the the op3t A3010 version (not dure whether I'm at the right forum or not lol) Recently I updated my phone to the new 4.1.7, in which I had already rooted the phone before with magisk v12. But right after the update, as usual, the phone will unroot and yes I did root the phone back by using the magisk v13.0 version. But it failed the safety net. So after a few 'research', I installed the superuser just in case that the safety net will work this time. But this is when it all went wrong. The phone did restart back to factory settings, but the phone is not rooted (checked by using the rootchecker app) So again, I'm back to the twrp recovery, clean wipe all the data, with hope that I can start from scratch which is from installing the magisk all over again. But after this step, it stuck at the boot logo for like more than half an hour. Than at this moment, I restart my phone back to recovery mode by long pressing the power button, and when I try to install both the magisk 12 and 13 version, there is a line of error code on the screen. There's a site that says simply go to the advance setting on the twrp interface, check fix contents and ur phone will be as good as new. After done doing that, I'm now stuck with a phone with no os installed and about 38% battery left. Can anyone help me here? This is the only phone that I had :crying: Urgent help needed here guys
Unless your original installation is without storage encryption (no dm-verity) this will happen. So next time install custom rom after flashing OB22 firmware+modem, then boot patch for dm-verity followed with custom rom and gapps then boot without wipe
i have the same problem but with p9 lite : when i tried a flash lineageOS or ResurrectionRemix my phone stucks at boot logo and when i flash the original os my phone works perfectly
sorry for my english
washichi said:
I fixed it .
did a fill whipe, then flashed feedomOS, then tried to boot, didnt get past the logo, booted into recovery, selected "fix Contexts" and then rebooted, started without any problem .
Click to expand...
Click to collapse
How long did you wait?
washichi said:
Edit: solution added
boot into TWRP > Advanced > Fix Contexts, and swipe to Fix Contexts
Reboot
(wait a while, it might take a few minutes till it boots)
Click to expand...
Click to collapse
What is the work around for CWM v6.0.5.1 Philz Touch6; it does not have Fix contexts under Advanced Functions
My issue: Tecno Spark K7 stuck at boot logo after flashing with ported ROM from Infinix XOS Chameleon . Both kernels match
This is EXACTLY my issue with the galaxy s9 plus. Gonna try the solution you wrote tommorow.
i have the same problem with galaxy s5 and the solution mentioned in the thread did not work with me.
im having the same issue but in lenovo z5 pro gt
PauloVillaflor said:
im having the same issue but in lenovo z5 pro gt
Click to expand...
Click to collapse
Search for answers HERE and if not successful, create a thread in the Q&A forum there.
You may not get any help here since this is the OP 3 forum.