i wanted to install @niaboc79 's existenz ultra rom v2.. so..
i went according to the process as it was said
i did flash my phone with sony's latest firmware .2.67
i have a locked bootloader.
rooted and installed cwm.
then i put the v2 of existenz ultra rom in my internal storage..
wiped data, cache and dalvik cache..
installed the rom.
then when i pressed the reboot system now.. it said that rom may flash stock recovery on boot fix?
first i tried with yes, but it got stuck at the sony logo and would not go further.
again i did the same procedure and this time i tried no. but still it is getting stuck at the same place..
plz help... how to i get this rom running...
flash latest ftf for ZL, root then install CWM, now download existenz rom "v2" put it on your sd card, go to recovery flash the rom... you don't need wipe because you had installed ftf and it delete all (make sure no field is checked while flashing with flashtool)
i used that rom without problem... CM 10.2 now
ok so now i am on v1 of the rom cause of many tries i made it woukd still get stuck at the sony logo.
v1 installed without any problems..but don't know why the v2 is not..
any suggestion on how do i upgrade now without going into the bootloop again..:fingers-crossed:
jeet.dedhia said:
ok so now i am on v1 of the rom cause of many tries i made it woukd still get stuck at the sony logo.
v1 installed without any problems..but don't know why the v2 is not..
any suggestion on how do i upgrade now without going into the bootloop again..:fingers-crossed:
Click to expand...
Click to collapse
MP me and I will help you with/through the process
Related
I have a big problem. I had installed 4.04 latest ICS. The I rooted the phone and installed cwm via x-parts from google play. Then I booted to cwm recowery from x-parts. Then I wiped all data and formated System!! I flashed new rom whic was only update not whole rom. I rebooted the phone and now I cannot get into cwm recovery and there is no system! What can I do???
Thank you!
Reflash the stock ROM, and don't wipe data if you install CWM through X Parts.
Sent from myushi
Problem like this
XperienceD said:
Reflash the stock ROM, and don't wipe data if you install CWM through X Parts.
Sent from myushi
Click to expand...
Click to collapse
Hello there, I got the same problem, I have rooted it, and installed remix ice and jelly bean v3. After rebooting it stocked on Sony logo, now I can do anything more, It turn on it selfs, I cant shut down. The pc doesnt recognize it so cant flash other one which works...
Is there any other solution please help
As above, I can only assume that the ROM you installed didn't come pre installed with cwm.
Plenty out there that do....jj's hybrid is nice.
humercab said:
I have a big problem. I had installed 4.04 latest ICS. The I rooted the phone and installed cwm via x-parts from google play. Then I booted to cwm recowery from x-parts. Then I wiped all data and formated System!! I flashed new rom whic was only update not whole rom. I rebooted the phone and now I cannot get into cwm recovery and there is no system! What can I do???
Thank you!
Click to expand...
Click to collapse
Use SEUS to flash stock firmware if you did not unlock bootloader, or flash stock firmware .ftf file with flashtool.
僕のLT18iから送られてきた
Hey,
I've been trying to install this for the past 3 hours without success.
I have a unlocked bootloader with CWM.
I flashed the zip file not before I formatted everything. Installation did not show up any sign of errors.
But I keep getting a white screen after the FXP logo and nothing happens.
I also tried flashing .55 firmware first and then flashing Speed but to no avail.
What am I doing wrong?
Thanks!
try flash custom kernel with CWM adn support by SSpeed, and then via CWM flash ROM
I'll try that, thanks!
I'll try that, thanks!
right ima cut to the chase
i used to use cyanogen mod 10 but wanted a official rom from sam mobile so i flashed via odin and cocked up my note 2 n7100
now i can get into recovery and download mode and i have flashed the same cm10 via tw recovery and it hangs on boot animation
i then wiped and flashed via recovery SSHD rom and it also hangs at boot animation so what do you guys think is wrong?
i need this fixed it cost way too much to just thow in the junk draw espcially since i cant work anymore.
thanks
-FatBoyNate
When you change your rom you need to wipe data from recovery.
FatBoyNate said:
right ima cut to the chase
i used to use cyanogen mod 10 but wanted a official rom from sam mobile so i flashed via odin and cocked up my note 2 n7100
now i can get into recovery and download mode and i have flashed the same cm10 via tw recovery and it hangs on boot animation
i then wiped and flashed via recovery SSHD rom and it also hangs at boot animation so what do you guys think is wrong?
i need this fixed it cost way too much to just thow in the junk draw espcially since i cant work anymore.
thanks
-FatBoyNate
Click to expand...
Click to collapse
Always flash custom rom through custom recoverys only (not from stock rom). Flash TWRP or CWR or Philz recovery first and then flash custom rom.
After flashing custom rom or stock rom, first wipe data and cache (as above said) before rebooting.
sent from my GT-N7100. Press thanks if I helped..
MBariya said:
Always flash custom rom through custom recoverys only (not from stock rom). Flash TWRP or CWR or Philz recovery first and then flash custom rom.
After flashing custom rom or stock rom, first wipe data and cache (as above said) before rebooting.
sent from my GT-N7100. Press thanks if I helped..
Click to expand...
Click to collapse
i have flashed a custom rom through a custom recovery, i've been flashing custom roms since the htc himalaya and never had a booting problem.
i think i snuffed the bootloader can anyone give a me a stock nandroid?
OR
guide me as how to get past the 2nd boot logo, i also flashed a core 2 kernel and that's when i think the damage was done, if it will fix this, where can i get the stock kernel?
[EDIT] atm it has SSHD ROM and The SSHD Kernel i get the samsung n7100 logo and then the boot animation but then it gets stuck.
FatBoyNate said:
i have flashed a custom rom through a custom recovery, i've been flashing custom roms since the htc himalaya and never had a booting problem.
i think i snuffed the bootloader can anyone give a me a stock nandroid?
OR
guide me as how to get past the 2nd boot logo, i also flashed a core 2 kernel and that's when i think the damage was done, if it will fix this, where can i get the stock kernel?
[EDIT] atm it has SSHD ROM and The SSHD Kernel i get the samsung n7100 logo and then the boot animation but then it gets stuck.
Click to expand...
Click to collapse
same has happened to me.
FatBoyNate said:
i have flashed a custom rom through a custom recovery, i've been flashing custom roms since the htc himalaya and never had a booting problem.
i think i snuffed the bootloader can anyone give a me a stock nandroid?
OR
guide me as how to get past the 2nd boot logo, i also flashed a core 2 kernel and that's when i think the damage was done, if it will fix this, where can i get the stock kernel?
[EDIT] atm it has SSHD ROM and The SSHD Kernel i get the samsung n7100 logo and then the boot animation but then it gets stuck.
Click to expand...
Click to collapse
ItzMar said:
same has happened to me.
Click to expand...
Click to collapse
get into recovery flash this file http://d-h.st/fWr u will loose evrything from internal memory, now after it reboot to recovery just flash your rom but dont reboot after installation.
first click fix permission
then wipe cache and dalvik atleast twice
then reboot!
it should load the rom fine, and i would suggest to stay with philz recovery and create a backup of efs and rom both the terminal way and through recovery too
shhbz said:
get into recovery flash this file http://d-h.st/fWr u will loose evrything from internal memory, now after it reboot to recovery just flash your rom but dont reboot after installation.
first click fix permission
then wipe cache and dalvik atleast twice
then reboot!
it should load the rom fine, and i would suggest to stay with philz recovery and create a backup of efs and rom both the terminal way and through recovery too
Click to expand...
Click to collapse
once i flashed it i gete:error opening 'data/dontpanic'
e:error I/O error
it didnt reboot. do i click reboot system after flashing your file?
ItzMar said:
once i flashed it i gete:error opening 'data/dontpanic'
e:error I/O error
it didnt reboot. do i click reboot system after flashing your file?
Click to expand...
Click to collapse
I hope u are rooted and have a custom recovery installed if yes then its a script to clean wipe the rom to start a fresh install better known as dirty flash so when u flash the zip it will wipe ur cache, dalvik, system on recover and will automatically reboot to recovery then u can proceed wth any custom rom u want the latest philz recovery is recommended.i am using my phn yo reply and already 4am morning here so be sure what you are doing , give complete info of ur phn status as wht u hv done till now if u have all as mentioned abv then u r good to go and flash, but in ur case the flash of the file was not successful so u can manually wipe all mentined above and procced as instructed.
Its an instruction for custom rom and recovery if u have stock then just wipe cache and dalvik and try booting up.
Off to sleep
If you are unsure of what u r doing then try to get hands on odin and flash stock rom ,as messing up to much may damage ur pit partition
shhbz said:
I hope u are rooted and have a custom recovery installed if yes then its a script to clean wipe the rom to start a fresh install better known as dirty flash so when u flash the zip it will wipe ur cache, dalvik, system on recover and will automatically reboot to recovery then u can proceed wth any custom rom u want the latest philz recovery is recommended.i am using my phn yo reply and already 4am morning here so be sure what you are doing , give complete info of ur phn status as wht u hv done till now if u have all as mentioned abv then u r good to go and flash, but in ur case the flash of the file was not successful so u can manually wipe all mentined above and procced as instructed.
Its an instruction for custom rom and recovery if u have stock then just wipe cache and dalvik and try booting up.
Off to sleep
If you are unsure of what u r doing then try to get hands on odin and flash stock rom ,as messing up to much may damage ur pit partition
Click to expand...
Click to collapse
:angel:Saviour!:angel:
Thank you so much. All is well now. :highfive:
Hello,
Today i rooted my Galaxy grand with CWM using Odin and intalled SuperSu through recovery mode. Then i entered recovery mode again to install Xperia Z rom for Galaxy Grand , which i had placed in my external sd card. When i installed it using all the steps(Wipe data,cache etc etc) and reeboted my device, it got stuck on the boot screen with Samsung Galaxy grand logo running in loop for several time. Atlast i removed my battery and using the download mode again installed the 4.2.2 update with Odin.
Can u please tell me what went wrong while installing the rom.
nish1991 said:
Hello,
Today i rooted my Galaxy grand with CWM using Odin and intalled SuperSu through recovery mode. Then i entered recovery mode again to install Xperia Z rom for Galaxy Grand , which i had placed in my external sd card. When i installed it using all the steps(Wipe data,cache etc etc) and reeboted my device, it got stuck on the boot screen with Samsung Galaxy grand logo running in loop for several time. Atlast i removed my battery and using the download mode again installed the 4.2.2 update with Odin.
Can u please tell me what went wrong while installing the rom.
Click to expand...
Click to collapse
Maybe your source file is corrupted? In CWM, after installing the ROM, does it appears installation success or update success any similar message?
And suggest you wipe data & cache after installing the ROM, not before. Wipe Dalvik cache too.
soralz said:
Maybe your source file is corrupted? In CWM, after installing the ROM, does it appears installation success or update success any similar message?
And suggest you wipe data & cache after installing the ROM, not before. Wipe Dalvik cache too.
Click to expand...
Click to collapse
Source file? Are you speaking about the rom file I downloaded ?
Yes after installing the rom there is message Updated Successfully in CWM.
But i wiped the data and cache before installing the rom and dalvik cache after installing the rom..
Please help....can you give me detailed steps for installing rom.
If you are coming from stock rom after it shows installation complete again wipe all DATA frm cwm and reboot
Sent from my GT-I9505 using Tapatalk 2
Sulaimanshariff said:
If you are coming from stock rom after it shows installation complete again wipe all DATA frm cwm and reboot
Sent from my GT-I9505 using Tapatalk 2
Click to expand...
Click to collapse
Hey no worries...
I just installed another Xperia Z rom...and everything is grt nw....
Same Problem it is stucked now on that sceen and I too got the massage that it is install successfully... I cant install any other ROM as I want to use dual sim and most of the ROM are not compatible with dual SIM.... PLEASE HELP
soralz said:
Maybe your source file is corrupted? In CWM, after installing the ROM, does it appears installation success or update success any similar message?
And suggest you wipe data & cache after installing the ROM, not before. Wipe Dalvik cache too.
Click to expand...
Click to collapse
nish1991 said:
Hello,
Today i rooted my Galaxy grand with CWM using Odin and intalled SuperSu through recovery mode. Then i entered recovery mode again to install Xperia Z rom for Galaxy Grand , which i had placed in my external sd card. When i installed it using all the steps(Wipe data,cache etc etc) and reeboted my device, it got stuck on the boot screen with Samsung Galaxy grand logo running in loop for several time. Atlast i removed my battery and using the download mode again installed the 4.2.2 update with Odin.
Can u please tell me what went wrong while installing the rom.
Click to expand...
Click to collapse
"Atlast i removed my battery and using the download mode again installed the 4.2.2 update with Odin."
can you tell me how you did?? i am a newbie
stuck in boot loop
soralz said:
Maybe your source file is corrupted? In CWM, after installing the ROM, does it appears installation success or update success any similar message?
And suggest you wipe data & cache after installing the ROM, not before. Wipe Dalvik cache too.
Click to expand...
Click to collapse
yes everything went right but after i click reboot than i try to start samsung galaxy grand i9082 logo appears there it blink 4 5 times then i remove my battery and try to start again but now it is not even opening not cwm recovery menu and not going to the odin download mod also
ODIN mode is also not opening without usb cavle mean opening when plugged into charging.
please help me ,-_-,
, ,
Xperia Z Rom GT-I9082
Which CWM i recovery i use please tell me
i'm using CWM 6.0.2 recovery but when try to install i stuck in installing screen and then automatically back in recovery mode.
MD5 not found
yogeshp007 said:
Which CWM i recovery i use please tell me
i'm using CWM 6.0.2 recovery but when try to install i stuck in installing screen and then automatically back in recovery mode.
MD5 not found
Click to expand...
Click to collapse
Ik think that the CWM version is to old.
Also if you want to go to lollipop later then you can't do this with CWM 6.0.2.
Download a new CWM with an minimum version 6.4.5 or TWRP 2.8.6.0.
Never tried to install the older version roms with TWRP but with CWM I was able to install all.
Installing Rom
Sir i want to install xperia z rom please help me!!
tell me in details please
Hi Mates,
I was unlocking the bootloader of my Xperia M Dual. It went well but after that the phone went into bootloop. I read quite a few threads which suggest to flash stock rom. But I am having a few problems :
1. Cant find Indian stock rom, some links dont have the file others have a brazilian version. Please give a link.
2. Will flashing stock rom would work as I havent installed any backup CWM or TWRP ?
3, Can I flash cynogen nightly directly instead of flashing stock rom ?
4. Other things I should know prior flashing being a newbie.
5. BTW how much time does it takes to boot after unlocking bootloader ?
Ckp1991 said:
Hi Mates,
I was unlocking the bootloader of my Xperia M Dual. It went well but after that the phone went into bootloop. I read quite a few threads which suggest to flash stock rom. But I am having a few problems :
1. Cant find Indian stock rom, some links dont have the file others have a brazilian version. Please give a link.
2. Will flashing stock rom would work as I havent installed any backup CWM or TWRP ?
3, Can I flash cynogen nightly directly instead of flashing stock rom ?
4. Other things I should know prior flashing being a newbie.
5. BTW how much time does it takes to boot after unlocking bootloader ?
Click to expand...
Click to collapse
A1. This thread helped me. - http://forum.xda-developers.com/showthread.php?t=2532190.
A2. Yes, flashing stock rom would work even if you haven't installed any backup using CWM or TWRP.
A3. You can still flash CyanogenMod Nightlies directly instead of flashing the stock rom and then flashing CM again.
A4. Newbie here too! so I can't actually Suggest you anything
A5. It is supposed to take 5-10 minutes but even my phone went into bootloop.
What I did :-
> Flashed the old TWRP recovery from flashtool
> Installed CM and GApps
> Wiped Data/Factory Reset
> Rebooted the Device.
And VIOLA! the phone works like a charm!
I've been using the ROM for 2-3 days now and I have no major problems as of yet.
Hope this works out in your favour!
Happy Flashing!
After unlocking bootloader Bootloop is normal. You have to flash stock rom to fix it and also you can also flash any custom recovery(Cwm,Twrp) then flash any custom rom to fix it.
4.3 Indian Stock Rom
Recovery - CWM Philz
I am getting application error on flashtool help