Today just suddenly my note 2 rebooted wasn't watching it and stayed on the Samsung Galaxy note II boot logo.
Can't get in recovery mode tried it for like 40 times now, I can get in download mode hooked it up to odin flashed it odin says no problem or error (see log below)
It's just a stock rom like the one before and rooted, installed nothing weird of experimental, always updated with mobile odin.
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXALIJ_N7100TNLALJ2_N7100XXALIH_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> modem.bin
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
flash stock recovery through Odin, use xda search bar for it.
nitol said:
flash stock recovery through Odin, use xda search bar for it.
Click to expand...
Click to collapse
I tried to install a recovery stock and custom nothing still the samsung Galaxy logo.
Or I'm doing something wrong, just loaded the recovery in odin AP/PDA and left the rest untouched hit start Odin does his thing no error .
Related
yesterday I wrote to find a solution to E failed to mount/system invalid argument cant mount system I was reffered to wwjosdew video and also went onto viperboy thread on how to unbrick phones I did everything shown in the video and what viperboy said but when odin was running the file it failed and gave me this
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SPH-L900_L900VPALJ1_L900VPALJ1_L900SPTALJ1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> modem.bin
<ID:0/003> param.bin
<ID:0/003> recovery.img
<ID:0/003> sboot.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
can anynone help me out with this problem been working on this for hours I have wiped and reset the phone already and I also downloaded the toolkit and the kit recognizes my phone and serial is rcognized.........
S boot is going to fail when loading a Older tar ....it won't allow you to go back to a older boot loader ... use this and next time search it has been ask plenty of timeshttp://forum.xda-developers.com/showthread.php?t=2086769
Sent from my SPH-L900 using Xparent BlueTapatalk 2
I am on 4.4.2 and stuck..... I can flash TWRP/CWM recoveries and CF-Auto-Root-jfltetmo no problem but whenever I go to Flash M919UVUFNB4_M919TMBFNB4_M919UVUFNB4_HOME.tar.md5 via odin, i get the following ... then it fails.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUFNH7_M919TMBFNH7_M919UVUFNH7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I can install roms from the recovery but I absolutely need Wifi calling/sms/mms. I have terrible service in my apartment and at work as well. Installed hyper v6 but was told I need to odin/kies to 4.4.4.
Any help would be greatly appreciated!
zero visual said:
I am on 4.4.2 and stuck..... I can flash TWRP/CWM recoveries and CF-Auto-Root-jfltetmo no problem but whenever I go to Flash M919UVUFNB4_M919TMBFNB4_M919UVUFNB4_HOME.tar.md5 via odin, i get the following ... then it fails.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUFNH7_M919TMBFNH7_M919UVUFNH7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I can install roms from the recovery but I absolutely need Wifi calling/sms/mms. I have terrible service in my apartment and at work as well. Installed hyper v6 but was told I need to odin/kies to 4.4.4.
Any help would be greatly appreciated!
Click to expand...
Click to collapse
when you flashed to NH7 aka 4.4.4. it failed via odin. Its either a bad download or a usb problem. Try re-dowloading the NH7 FW aka 4.4.4 and flash via odin. then flash the root tar, than the philz custom recovery tar, both like you did with the firmware, reboot recovery and wipe cache and reboot.
i'll give that a try and let you know how it goes. Downloading it again right now as we speak.
Try the latest cwm recovery, KK needs to be flashed with most current custom recovery's.
Pp.
det0xx said:
when you flashed to NH7 aka 4.4.4. it failed via odin. Its either a bad download or a usb problem. Try re-dowloading the NH7 FW aka 4.4.4 and flash via odin. then flash the root tar, than the philz custom recovery tar, both like you did with the firmware, reboot recovery and wipe cache and reboot.
Click to expand...
Click to collapse
No go... I redownloaded NH7 and odin3.09 from sammobile.com samething that happned. I even tried different usb cable and multiple ports... and other idea's?
What rom are you running at present?
Pp.
I was on T889UVALL4, use Odin to flash root66_TMO_T889UVUCMK7_2.tar.md5, got PASS, phone stuck in boot loop, can not get into recovery mode, so I try flashing again and got the following error. ( i flash KIES_HOME_T889UVALL4_T889TMBALL4_598701_REV04_user _low_ship.tar.md5 with the same result)
Please help.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_TMO_T889UVUCMK7_2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
here is the Odin log for stock firmware:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_T889UVALL4_T889TMBALL4_598701_REV04_user _low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My question is: Can this be fix with Odin? or do I need to fix a shop that can repair the EMMC? if it is the latter, does anyone know where to find a trust worthy shop with in the San Francisco bay area?
Thanks
onqq said:
I was on T889UVALL4, use Odin to flash root66_TMO_T889UVUCMK7_2.tar.md5, got PASS, phone stuck in boot loop, can not get into recovery mode, so I try flashing again and got the following error. ( i flash KIES_HOME_T889UVALL4_T889TMBALL4_598701_REV04_user _low_ship.tar.md5 with the same result)
Please help.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_TMO_T889UVUCMK7_2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
here is the Odin log for stock firmware:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_T889UVALL4_T889TMBALL4_598701_REV04_user _low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My question is: Can this be fix with Odin? or do I need to fix a shop that can repair the EMMC? if it is the latter, does anyone know where to find a trust worthy shop with in the San Francisco bay area?
Thanks
Click to expand...
Click to collapse
I found a pit file and try flashing with Odin, here is the output:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Does that mean my EMMC is corrupted and needs repairing? :crying:
Boot into recovery and Factory/Data Reset
See if that helps
Double0EK said:
Boot into recovery and Factory/Data Reset
See if that helps
Click to expand...
Click to collapse
unfortunately, I can't get into recovery.
when I press volume up+home+power button, I just get a flashing Samsung Galaxy 2 logo (aka boot loop hell)
onqq said:
unfortunately, I can't get into recovery.
when I press volume up+home+power button, I just get a flashing Samsung Galaxy 2 logo (aka boot loop hell)
Click to expand...
Click to collapse
Get the tar file for the most recent TWRP and Odin that. Boot into recovery and factory reset. Try booting normally. If that fails try to Odin the UVALJ1 tar by MrRobinson. (2-3 times). Try booting normally. Once you can boot normally go ahead and try the MK7 tar.
Hey all I'm not sure what happened but I reflashed to stock KitKat and while I did that I installed all the newest updates to receive Lolipop and after I finished that I downloaded CF-AutoRoot. I rooted it and got stuck with a bootloop so I went into the stock recovery and erased everything. So I repeated step one by reflashing KitKat and now Odin is giving me an error and it isn't working.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910PVPU1ANIE_N910PSPT1ANIE_N910PVPU1ANIE_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas? I'm about to pull my hair out
So you took OTA updates to 5.1.1? If so, you can't go back to KitKat which is why Odin fails. You'll have to Odin OG5 tar in order to get back to working order. CF autoroot won't work on 5.1.1 either and probably gave you the bootloop. You'll have to flash a modded kernel or entire prerooted 5.1.1 ROM to get root
I think I got it to work now
I recently bought a phone from Freedom Pop for one of my kids, I not a fan of how the phone uses there dialer and there text message app so, i want to revert the ROM back to the Sprint stock ROM and i'm running into some issues and i'm stuck
I have download the rom from here http://stockroms.net/file/GalaxyS3/SPH-L710
i'm using Odin3 v3.09 (i have also tried and older version did work)
and I have installed the drivers for the phone
when i start to flash the phone i receive a fail error
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_L710VPBMD4_L710SPRBMD4_1130792_REV03_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I think i have ran into the issue before with another Sprint Galaxy S3 that i root and then reverted back to stock but don't remember how or what i did to fix, I think it's related to the ROM but i need help as i'm trying to give this a gift for son for christmas
solved - i found another room from http://www.sammobile.com/firmwares/confirm/41671/L710VPUDNJ2_L710SPRDNJ2_SPR/ that worked with no issue
mcolvin2005 said:
I recently bought a phone from Freedom Pop for one of my kids, I not a fan of how the phone uses there dialer and there text message app so, i want to revert the ROM back to the Sprint stock ROM and i'm running into some issues and i'm stuck
I have download the rom from here http://stockroms.net/file/GalaxyS3/SPH-L710
i'm using Odin3 v3.09 (i have also tried and older version did work)
and I have installed the drivers for the phone
when i start to flash the phone i receive a fail error
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_L710VPBMD4_L710SPRBMD4_1130792_REV03_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I think i have ran into the issue before with another Sprint Galaxy S3 that i root and then reverted back to stock but don't remember how or what i did to fix, I think it's related to the ROM but i need help as i'm trying to give this a gift for son for christmas
Click to expand...
Click to collapse
The ROM that it ships on from FreedomPop is pretty much the Stock Sprint ROM with minor changes. You can just uninstall/disable the applications mentioned.
You should follow the instructions here if you want to use ODIN and flash the unmodified Stock Sprint ROM.
EDIT: Oops missed the second post
I just used TWRP. I've never used Odin.