Develop Bugs

AOKP 4.2 & CM 10.1 Nightly Q & A thread

This thread is a place for people to ask questions and get answers about CM 10.1 Nighty and Official when it comes out. This thread is the proper place for these kind of questions for now.
Link to CM 10.1 Nightly
http://jenkinsmanifest.clockworkmod.com/device/d2att/all
CM 10.1 Changelog credit lisek99
http://10.1.cmxlog.com/?device=d2att
4.2 GAPPS Credit Mike Ramsay
http://goo.im/devs/itsmikeramsay/gapps-jb-20121212-signed.zip
Ktoonsez 4.2 Kernel
http://forum.xda-developers.com/showthread.php?t=1871946
CyanogenMod's Progress
http://review.cyanogenmod.org/#/q/status:merged,n,z
itsmikeramsay's rendition of CM 10.1
http://forum.xda-developers.com/showthread.php?t=2039995
It has "..a few cherry-picks. We're shooting for that sweet spot between CM10.1 and AOKP."
Euroskank CM 10.1 kang d2att
http://forum.xda-developers.com/showthread.php?t=1806921
has cherry picks as well
Common Flash Process
1. wipe cache/dalvik
2. wipe system
3. factory reset
4. wipe data
5. TWRP users wipe internal-wipes internal data that could corrupt something
6. flash rom
7. flash gapps
Do this if you have any unexpected problems.
If you want flash ktoonsez kernel but if you have problems follow the flashing procedure before posting about problems/questions
Possible Data Fix
Alright, for anyone having issues with the CM10.1 "pre-release" builds (official or otherwise) not allowing you to keep a connection, here's how to fix it:
Download one of the modem files for your device (read!) in the OP of the modem thread. Any of the options will work, pick the one you want.
Keep that ZIP on your EXTERNAL storage. You need to be able to find it from CWM/TWRP.
With CM10.1 running, disable data from System Settings > "More..." (under Data Usage) > Mobile Networks > "Data enabled" (uncheck it)
Reboot into recovery. (Long-press Power, "Reboot", "Recovery", [OK])
Flash the modem from step 1.
Clear Cache and Dalvik Cache.
Reboot back into CM10.1.
Wait 30 seconds!
Enable data from System Settings > "More..." (under Data Usage) > Mobile Networks > "Data enabled" (check it).
You should have data within 10-20 seconds!
If this doesn't work, you might need to reset your APNs to default. This will only happen if you make changes to your APNs, so go into the APN list and press the menu key and hit "Reset to defaults". Then start over at step 1.
To prevent this problem, you should disable data before shutting off your device. You can enable it 30 seconds after boot and it should work again. If you get stuck in the "disconnect-loop", repeat these steps.
Themes
Sense 4 10.1 theme (might work for other roms)
http://forum.xda-developers.com/showthread.php?t=2051326

My dataaa, oh my dataaaa.
I almost have everything working, however I can't seem to get my 4G data to work.

khep24 said:
I almost have everything working, however I can't seem to get my 4G data to work.
Click to expand...
Click to collapse
1) Do you mean LTE, HSPA(+), or something else? HSPA(+) doesn't seem to work very well under 4.2 conditions.
2) Who's your carrier?

smelenchuk said:
1) Do you mean LTE, HSPA(+), or something else? HSPA(+) doesn't seem to work very well under 4.2 conditions.
2) Who's your carrier?
Click to expand...
Click to collapse
I'm sorry for being vague I thought this whole thread was just for GS3 AT&T version, but LTE data for AT&T. Thanks

khep24 said:
I'm sorry for being vague I thought this whole thread was just for GS3 AT&T version, but LTE data for AT&T. Thanks
Click to expand...
Click to collapse
The same model of phone (well, more or less) is used for several Canadian carriers, which is why I'm asking.
Just to confirm: are you getting a data connection on something other than LTE? If so, that narrows down the number of things that could be wrong - my two immediate guesses would be that you have the wrong APN set or you have the wrong network type set in either Settings -> More -> Mobile Networks or in the Phone Info menu you can get by dialing *#*#4636#*#* (these are both known to happen immediately after flashing something).

smelenchuk said:
The same model of phone (well, more or less) is used for several Canadian carriers, which is why I'm asking.
Just to confirm: are you getting a data connection on something other than LTE? If so, that narrows down the number of things that could be wrong - my two immediate guesses would be that you have the wrong APN set or you have the wrong network type set in either Settings -> More -> Mobile Networks or in the Phone Info menu you can get by dialing *#*#4636#*#* (these are both known to happen immediately after flashing something).
Click to expand...
Click to collapse
There it goes , that did the trick thanks for the help. Now my GS3 is working perfectly with the update.

Are you getting a 4G logo on your bar? I cannot get anything but 3g,H, and H+. Mobile network setting set to LTE/GSM/WCDMA. any help would be nice, I seem to mainly get H+ and sometime switches to 3G.
Using ATT carrier.
Sent from my Nexus 7

sliverboyx2002 said:
Are you getting a 4G logo on your bar? I cannot get anything but 3g,H, and H+. Mobile network setting set to LTE/GSM/WCDMA. any help would be nice, I seem to mainly get H+ and sometime switches to 3G.
Using ATT carrier.
Sent from my Nexus 7
Click to expand...
Click to collapse
I'm going to offer the same suggestions: check your APN settings (that seems to be the big one for AT&T) and check your network types.
I assume you've had LTE coverage under other ROMs?

Hey guys, when I connect my phone to my PC I can't see any folders. Anyone else having this?
AOKP 4.2 preview
Sent from my SGH-I747 using xda premium

Everything installs fine,....but the google play store gives me a "no connection" error....but browsing the internet works fine. I followed all the steps exactly.

zap12341 said:
Hey guys, when I connect my phone to my PC I can't see any folders. Anyone else having this?
AOKP 4.2 preview
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
Are no files displayed at all or is it just displaying differently? Once I updated, it moved all my files to the folder/0. Check there and it should display your folders as on 4.1. I believe it has to do with the multiple user functionality.
Sent from my Nexus 7 using xda app-developers app

When I flashed it, it didn't create a /0 for me.
Sent from my SGH-I747 using xda premium

zap12341 said:
When I flashed it, it didn't create a /0 for me.
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
I can't see any folders either. Same ROM.
Sent from my SAMSUNG-SGH-I747 using xda premium

zap12341 said:
Hey guys, when I connect my phone to my PC I can't see any folders. Anyone else having this?
AOKP 4.2 preview
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
Its a preview. Its not supposed to work. The preview I released is basically just a screenshot of what's to come. I haven't even release a full ROM yet.

Emoticons
The emoticons are now implemented in the keyboard, is there a way to flash em over or download em. If anyone else has this issue let me know.

I can't get Portable Wi-Fi hotspot to work?
any ideas, has anyone else tried it?
is there a way to submit bug reports for nightly builds?

no data connection at all now via the radio.(but the phone can receive & make calls) I followed the steps to check it as posted by another user above....but still tryin different modem files.

did you try the fix in the op?

CM10.1 on Bell Galaxy SIII
I installed CM10.1 yesterday. Most of it works flawlessly. Had to uninstall and reinstall some apps (Google Play Magazines) for example. But almost all of them work as is.
I do have a problem with cell data connectivity. I need to reboot a couple of time to make it work. When it does, it works flawlessly. But when it doesn't there's nothing you can do. And it's random. You reboot, it may or may not work. If it doesn't, you reboot until it does. I also didn't have H+. I changed my baseband version and I now have H+.
This very much like a limit condition on init sequence. It was working with CM10 so I guess the components initialization sequence changed a bit for CM10.1.

wujiku said:
did you try the fix in the op?
Click to expand...
Click to collapse
Ya that's what I've been working on. I finally did get it working (for now) with the modem 3rd down on the list.
Does CM10.1 have a LTE icon that appears when LTE is being used, or does it always just say "4G"?
---------- Post added at 06:48 PM ---------- Previous post was at 06:39 PM ----------
ebfortin said:
I installed CM10.1 yesterday. Most of it works flawlessly. Had to uninstall and reinstall some apps (Google Play Magazines) for example. But almost all of them work as is.
I do have a problem with cell data connectivity. I need to reboot a couple of time to make it work. When it does, it works flawlessly. But when it doesn't there's nothing you can do. And it's random. You reboot, it may or may not work. If it doesn't, you reboot until it does. I also didn't have H+. I changed my baseband version and I now have H+.
This very much like a limit condition on init sequence. It was working with CM10 so I guess the components initialization sequence changed a bit for CM10.1.
Click to expand...
Click to collapse
This is getting to be my experience. I just tried a few different modems, and finally got it to work...then I decided to reboot...and it stopped working. A few reboots later, and it still is down for the count. I guess I'll try another modem.

No phone service

I can not get any radio to work to make or receive calls! I flashed everyone out there and still can not make or receive calls. What method can I use do to get it to work? I flashed radio from TWRP with Factory reset, delvik and cache and then flash with no wipe and I just cant get that or any radio to work. I just get AT&T when I do a scan, which I use T-Mobile. When I choose search in settings in mobile networks, still nothing. When I try to use phone, it always says no network avail. and yes I have data box checked off. It just seams lately any Rom I flash after the newest stock, (JB) I have radio issues, can not make or receive calls. I even erased, wiped everything and started from scratch with stock. Phones works fine, but when I try any ROM, no calls, no matter what radio I flash. I must be doing something wrong. I must say, that I flashed many a Roms before and all worked well until now! I even download same radios in case I got a bad download. I can use kernels, such as Tiberius with Stock JB. I Flash a Rom and no radio, no matter what Rom. My version in stock is UVMC6, SGH T-989 phone. (T-Mobile). I know all phones are different and thought maybe something in stock files I might be able to use, but don't know which files. I am not a dev by any means and thought if I could use the stock I have now can work with the any Rom here. I never dirty flash anything, all Roms work that I flash from sd card, just not able to use phone in any Rom at all! I thought maybe I can manually put in APN, but I have no idea were to get address to enter. I am from Delaware if that matters as far as APN. Can anyone give any suggestions of what they did to get radio to work?

Sargeue said:
I can not get any radio to work to make or receive calls! I flashed everyone out there and still can not make or receive calls. What method can I use do to get it to work? I flashed radio from TWRP with Factory reset, delvik and cache and then flash with no wipe and I just cant get that or any radio to work. I just get AT&T when I do a scan, which I use T-Mobile. When I choose search in settings in mobile networks, still nothing. When I try to use phone, it always says no network avail. and yes I have data box checked off. It just seams lately any Rom I flash after the newest stock, (JB) I have radio issues, can not make or receive calls. I even erased, wiped everything and started from scratch with stock. Phones works fine, but when I try any ROM, no calls, no matter what radio I flash. I must be doing something wrong. I must say, that I flashed many a Roms before and all worked well until now! I even download same radios in case I got a bad download. I can use kernels, such as Tiberius with Stock JB. I Flash a Rom and no radio, no matter what Rom. My version in stock is UVMC6, SGH T-989 phone. (T-Mobile). I know all phones are different and thought maybe something in stock files I might be able to use, but don't know which files. I am not a dev by any means and thought if I could use the stock I have now can work with the any Rom here. I never dirty flash anything, all Roms work that I flash from sd card, just not able to use phone in any Rom at all! I thought maybe I can manually put in APN, but I have no idea were to get address to enter. I am from Delaware if that matters as far as APN. Can anyone give any suggestions of what they did to get radio to work?
Click to expand...
Click to collapse
Verify your APN settings are correct. If there isn't a t mobile APN set up than try creating one. Also go to Settings > About Phone > Status and make sure your phone has a valid IMEI number (anything other than 0)
Sent from my SGH-I747 using xda app-developers app

KorGuy123 said:
Verify your APN settings are correct. If there isn't a t mobile APN set up than try creating one. Also go to Settings > About Phone > Status and make sure your phone has a valid IMEI number (anything other than 0)
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Thanks, yeah after all reading and troubleshooting it seems APN is where I have to create and/or edit! I found APN settings on Google and wrote down the settings that is on stock Rom where phone is working and will try it. Thanks for heading me in the right direction.

Sargeue said:
Thanks, yeah after all reading and troubleshooting it seems APN is where I have to create and/or edit! I found APN settings on Google and wrote down the settings that is on stock Rom where phone is working and will try it. Thanks for heading me in the right direction.
Click to expand...
Click to collapse
Glad to help.
Sent from my SGH-I747 using xda app-developers app

I'm in Canada and had same problem with SlimBean ROM (which is my favourite ROM). I flashed phone back to a stock ROM, flashed DARKSIDE.SUPER.WIPE, the ROM, and Gapps with TWRP recovery (in that order) and was back in business.
T989D
TWRP 2.4
SlimBean ROM 3.4

Deacon75 said:
I'm in Canada and had same problem with SlimBean ROM (which is my favourite ROM). I flashed phone back to a stock ROM, flashed DARKSIDE.SUPER.WIPE, the ROM, and Gapps with TWRP recovery (in that order) and was back in business.
T989D
TWRP 2.4
SlimBean ROM 3.4
Click to expand...
Click to collapse
Still no radio, will try your way, thanks!

[Q] Can't send sms and greyed bar after cm 10.2

Hello fellow xda members. Well after searching for a solution for my for nearly a week now i figure i should post the question to see if i can get an answer. I did search around before hand and tried many solutions but to no avail.
Background, I have a sgh-t999 that's apparently unlocked since I've been using a fido sim card in it for several months now. when ever I'm running cm 10.1, I have full network access, texts, mms, 3g data, etc.Note: d2mtr is flashed to my phone and my model number gets changed to sch-r530, baseband: t999vvllh2.
After flashing to cm 10.2 RC1. d2mtr. I get stuck on the metroPcs network with out any way to manually switch network operators because the option in mobile networks is greyed out. Everything seems to work fine in terms of calls but besides being able to receive texts messages i can't send them. The signal bar seems to be empty or greyed out yet it still picks up 3g data. I've vigorously checked my apn settings to no avail. deleted the voice+ apk since I'm not in the US being in Canada and i'm all out of options right now. If i restore back to my previous backup ,everything works fine and i did check to see if I loose my imei number after flash.
I previously tried flashing d2tmo to my device but to no avail, assert errors. It would greatly be appreciated to get a response and thank you in advance for any help.
Edit: It's a sgh-t999v as printed behind the battery. I followed this guide http://forum.xda-developers.com/showthread.php?t=1775616 hence the reason why I'm coming from ICS. Looks like I'll have to reflash using ODIN which i was trying to avoid out of fear of bricking but it seems like my only option now.

kyuubie said:
Hello fellow xda members. Well after searching for a solution for my for nearly a week now i figure i should post the question to see if i can get an answer. I did search around before hand and tried many solutions but to no avail.
Background, I have a sgh-t999 that's apparently unlocked since I've been using a fido sim card in it for several months now. when ever I'm running cm 10.1, I have full network access, texts, mms, 3g data, etc.Note: d2mtr is flashed to my phone and my model number gets changed to sch-r530, baseband: t999vvllh2.
After flashing to cm 10.2 RC1. d2mtr. I get stuck on the metroPcs network with out any way to manually switch network operators because the option in mobile networks is greyed out. Everything seems to work fine in terms of calls but besides being able to receive texts messages i can't send them. The signal bar seems to be empty or greyed out yet it still picks up 3g data. I've vigorously checked my apn settings to no avail. deleted the voice+ apk since I'm not in the US being in Canada and i'm all out of options right now. If i restore back to my previous backup ,everything works fine and i did check to see if I loose my imei number after flash.
I previously tried flashing d2tmo to my device but to no avail, assert errors. It would greatly be appreciated to get a response and thank you in advance for any help.
Click to expand...
Click to collapse
Might not be the right ROM for your phone. Or it could be buggy. I've messed around with a few and finally found a great one that seems to be working well for me. I have the d2ltetmo. I'm running Liquid Smooth ROM with 4.2.2 and TWRP 2500 recovery. The ROM roots your phone as well. Any questions feel free to ask. Hope I can help!:cyclops:

I wouldn't flash D2MTR Rom to D2TMO. Too many differing things. There's a CM for D2TMO too.

Are you sure that's a t999? The baseband looks like the one for the t999v.. And it also looks like you might be on ICS firmware.. What I suggest you do is check the model number of your phone to be sure what model you have, after that update to 4.1.1 or 4.1.2 via Odin but make sure its the firmware for your model. After this flash your custom recovery, and then try flashing cm10.1 for d2tmo.. If your device bootloops after you Odin, enter recovery and do a factory reset.
Edit: check the model number by removing the battery and it will say at the back of the phone.. And the firmwares to flash in odin are in the development thread
Sent from my SGH-T999 using Tapatalk

serio22 said:
Are you sure that's a t999? The baseband looks like the one for the t999v.. And it also looks like you might be on ICS firmware.. What I suggest you do is check the model number of your phone to be sure what model you have, after that update to 4.1.1 or 4.1.2 via Odin but make sure its the firmware for your model. After this flash your custom recovery, and then try flashing cm10.1 for d2tmo.. If your device bootloops after you Odin, enter recovery and do a factory reset.
Edit: check the model number by removing the battery and it will say at the back of the phone.. And the firmwares to flash in odin are in the development thread
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Well after a long process of flashing stock jb then finding a proper method of flashing cwm since i had difficulties with fastboot and went with the dd if-of method using the terminal emulator. I am finally on a stable cm 10.2 rom, d2tmo, where everything seems to be working and intact. Thanks for the advice now i have the long process of restoring my apps and data and what not with titanium backup.

CM11 No Mobile Network, Mobile Network State Disconnected

Whenever I flash cm 10.2 cm 11 any rom at all I face the problem of no internet. So I go back to stock. I have my baseband, build # important stuff like that. I always have to take out my assert lines. So when I flash any rom the fine line will say;
;Mount
or something like that I delete all the assert lines and I was told to keep assert lines but just change them to my baseband and stuff. Any help would be appreciated. & btw the problem is it says Mobile State: Disconnected. But I'm in service too.

I have the same problem. Been searching for a while and trying different fixes, but doesn't seem to be working. I'm on ATT galaxy S3, tho. If someone's got a working ATT S3 and let me know exactly what ROM, gapp, modem, etc they used, would much appreciate it.

Keyonwise said:
Whenever I flash cm 10.2 cm 11 any rom at all I face the problem of no internet. So I go back to stock. I have my baseband, build # important stuff like that. I always have to take out my assert lines. So when I flash any rom the fine line will say;
;Mount
or something like that I delete all the assert lines and I was told to keep assert lines but just change them to my baseband and stuff. Any help would be appreciated. & btw the problem is it says Mobile State: Disconnected. But I'm in service too.
Click to expand...
Click to collapse
More info is needed, such as carrier. I'm guessing either Virgin Mobile or Boost if you need to remove asserts on any of the pre-unified builds (this would hold true for any ROM that has switched to d2lte from d2spr). If that is the case, then you don't have the correct APN's configured. Also, it usually doesn't hurt to be running the most current modem (MK3 for Sprint, MK5 for VM/Boost). Again, the more info the better, then people don't have to play Twenty Questions in order to get to the heart of the matter.

This may work...
So, after trying countless options that i found on this site, and after dozens of flashing roms, modems, kernels, booloaders, restores, etc... turns out that i was doing everything right and there was nothing wrong with the install or the phone itself. After contacting my carrier (PTEL Mobile) for the third time, (first time they told me they had an outage, second time they told me to set the APN setting correctly - neither of which was incorrect on my end or the cause), they said they will try RESETting the DATA on their end. And guess what - that worked.
If you think you did everything correctly but still not getting data, i suggest you make your provider to do the same, or at least pry them as much as you can about your problem and what they can do about it. I wasted to much time and effort (my poor phone) on this and the solution was simple, and not my fault. Hope this helps others.

Mr. Struck said:
More info is needed, such as carrier. I'm guessing either Virgin Mobile or Boost if you need to remove asserts on any of the pre-unified builds (this would hold true for any ROM that has switched to d2lte from d2spr). If that is the case, then you don't have the correct APN's configured. Also, it usually doesn't hurt to be running the most current modem (MK3 for Sprint, MK5 for VM/Boost). Again, the more info the better, then people don't have to play Twenty Questions in order to get to the heart of the matter.
Click to expand...
Click to collapse
Hiya, I'm currently having the same problem as the OP. Mobile state disconnected but it says I am in service. Using latest version of Philz recovery and I flashed the most recent nightly of the Cyanogenmod 11 -4.4.2 KitKat (April 5th, 2014).Carrier is Virgin Mobile, using Samsung Galaxy SIII SPH-L710. PRL is most recent one 33030 and modem is MK5. I did however, flash the rom without deleting the assert lines, since I did not know I had to delete some assert lines. Any help with this? Thanks.

S0lstice said:
Hiya, I'm currently having the same problem as the OP. Mobile state disconnected but it says I am in service. Using latest version of Philz recovery and I flashed the most recent nightly of the Cyanogenmod 11 -4.4.2 KitKat (April 5th, 2014).Carrier is Virgin Mobile, using Samsung Galaxy SIII SPH-L710. PRL is most recent one 33030 and modem is MK5. I did however, flash the rom without deleting the assert lines, since I did not know I had to delete some assert lines. Any help with this? Thanks.
Click to expand...
Click to collapse
Deleting asserts is only for d2spr specific builds, that doesn't apply to d2lte builds (hence the reference to "pre-unified builds" in my first post). Your issue is most likely also related to APN's. However, there are also known data issues on a lot of the latest CM nightlies, and also on the ROM's that rely heavily on CM as a code source. I would strongly recommend reading the last several pages of the thread for any ROM that falls into this category in order to see what other users are reporting along these lines.

CM11 No Mobile Network
Hey guys,
Noob here. I'm running CM11-20140428-NIGHTLY-jflte on a Galaxy S4 GT-i9507(international, optus) but bootscreen now says 9505(not sure if that's important).
I've had Mobile Network State: Disconnected for the last three nightlies. On CM11 M3 it was working all good, but now no luck.
So I've tried a few things and I've come to the point where I'm going to try the factory reset then reflash CM11 and fingers crossed it will work.
Can anyone talk me through the proper procedure for this? I've made a full backup on my external SD using CWM 6.0.4.7 and transferred it to
computer just in case. So would anyone be awesome enough to take me through it step by step.
Cheers,

hhmmm
Use Rom Manager app and Fix Perrmisson
I install a bunch of roms on my dadz s3 and had 2 DirtyFlash it
And then used Wifi 2 get the app itselfz and it fix'd 88 permission
Idk jus tryn 2 help
Had sumthing 2 do w Gapps causing my issue

CM11 No Mobile Network
Ickyz said:
Use Rom Manager app and Fix Perrmisson
I install a bunch of roms on my dadz s3 and had 2 DirtyFlash it
And then used Wifi 2 get the app itselfz and it fix'd 88 permission
Idk jus tryn 2 help
Had sumthing 2 do w Gapps causing my issue
Click to expand...
Click to collapse
Just Fixed Permissions using Rom Manager, still no good.

Stock no APN settings at all
I have looked everywhere and found nothing for the last 3 weeks. I have a stock, sprint S3 on straight talk (my son's phone) it will not get 4g lte data what so ever. My phone is the exact same phone, and it does get 4g lte data. I tried all the basics ##72786# data on off check airplane mode...nothing. Mobile network state is "disconnected". So I opened data ##3282# to compare apn settings with my phone. I made sure everything matched, and when I get to "LTE APN Settings" I open it up, and nothing is there except APNs nothing, blank. Also missing is "Dial Up Networking" that option does not exist on my son's phone. He updated to kitkat (uggh) but the problem was present before that. Checked the phone, and it is not rooted. Funny thing is the phone updates with 4g lte running after dialing ##72786#, but that goes away after it completes. Texting works, but no mms (pictures etc.) and if I set it to cdma only it gets 3g, otherwise no data at all. Anybody?

[Q] How to enable network data after installing Cyanogenmod CM11 M7?

I tried flashing a custom ROM for the first time last night and so far I am really loving it. The only problem is, after flashing the CM11 M7 ROM it wont access any data over the cell network. I did figure out that if using Titanium Backup I restore my stock ROMs 4.3 data only from the Phone/Messaging Storage (SMS/MMS/APN) then reboot the network data does work. However, this causes the SMS to cease functioning. As soon as any app (default messenger, hangouts, 2-3 others I tried from store) tries to open it immediately crashes. Interestingly, it also will not allow me to restore my SMS records using Super Backup at this point. If I go back into Titanium backup then wipe the data for this process then the SMS starts working again, but all the old messages have been cleared, and as soon as I restart the phone the Network data is not working again.
Any ideas on what to do? I am wondering if maybe I need to adjust something in my APN profile, though I have absolutely no idea where I would get the information to do this.
This is what I am working with:
Phone: Samsung Galaxy S3 i747 (AT&T) -- [though currently I am using a TIGO sim card in Guatemala, wonder if this could have anything to do with it? was not a problem prior to switching the ROM though]
ROM: cm-11-20140608-SNAPSHOT-M7-d2lte.zip , the Cyanogenmod CM11 Snapshot lte release from yesterday
Android Version: 4.4.2
Baseband Version: I747UCUEMJB
Kernel Version: 3.4.91-cyanogenmod-g9b9605b8 [email protected] #1
Anyways, only having one or the other of my network data vs sms working is not really an option for me, so need to figure something out.
Thanks!

bnook said:
I tried flashing a custom ROM for the first time last night and so far I am really loving it. The only problem is, after flashing the CM11 M7 ROM it wont access any data over the cell network. I did figure out that if using Titanium Backup I restore my stock ROMs 4.3 data only from the Phone/Messaging Storage (SMS/MMS/APN) then reboot the network data does work. However, this causes the SMS to cease functioning. As soon as any app (default messenger, hangouts, 2-3 others I tried from store) tries to open it immediately crashes. Interestingly, it also will not allow me to restore my SMS records using Super Backup at this point. If I go back into Titanium backup then wipe the data for this process then the SMS starts working again, but all the old messages have been cleared, and as soon as I restart the phone the Network data is not working again.
Any ideas on what to do? I am wondering if maybe I need to adjust something in my APN profile, though I have absolutely no idea where I would get the information to do this.
This is what I am working with:
Phone: Samsung Galaxy S3 i747 (AT&T) -- [though currently I am using a TIGO sim card in Guatemala, wonder if this could have anything to do with it? was not a problem prior to switching the ROM though]
ROM: cm-11-20140608-SNAPSHOT-M7-d2lte.zip , the Cyanogenmod CM11 Snapshot lte release from yesterday
Android Version: 4.4.2
Baseband Version: I747UCUEMJB
Kernel Version: 3.4.91-cyanogenmod-g9b9605b8 [email protected] #1
Anyways, only having one or the other of my network data vs sms working is not really an option for me, so need to figure something out.
Thanks!
Click to expand...
Click to collapse
I apologize in advanced for not answering your question.
Is your issue that you cannot even get a signal with CM installed? I am also having the same issue.
Did your phone get signal/mobile network with the stock ROM? I am unable to find out if mine will work right now because it would take me a few days to download the stock ROM image...
Will be following this thread...
Mike

Have you checked that the APN on your phone is the right one for your carrier? Google search apn tigo guatemala galaxy s3 Many useful results will come up.

Ok here is how this played out. I did just need to reset then re enter the apn info for tigo in Guatemala. I actually managed to pull this info out of my pre flash backup from when I was using the stock Rom, then wipe the data for the process mentioned. This restored sms functionality and I then was able to manually enter the apn info (if anyone needs the Guatemala tigo apn info just post here and I can grab it when I am next at my cpu). I find it interesting that the apn info was automatically present and correct when I was using the stock Rom, but when I flashed cm11 over it was not there.
Just arrived back in the US and popped in my AT&T SIM card, everything worked fine right off the bat with it.
In answer to your question, after flashing cm11 I did have signal, but only for calls and sms. The data component of the network was not recognized.
Sent from my SAMSUNG-SGH-I747 using Tapatalk